2 * Copyright (c) 1997, 1998, 1999 Nicolas Souchu
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32 #include <sys/queue.h>
35 * Parallel Port Bus sleep/wakeup queue.
37 #define PPBPRI (PZERO+8)
40 * Parallel Port Chipset mode masks.
41 * NIBBLE mode is supposed to be available under each other modes.
43 #define PPB_COMPATIBLE 0x0 /* Centronics compatible mode */
45 #define PPB_NIBBLE 0x1 /* reverse 4 bit mode */
46 #define PPB_PS2 0x2 /* PS/2 byte mode */
47 #define PPB_EPP 0x4 /* EPP mode, 32 bit */
48 #define PPB_ECP 0x8 /* ECP mode */
51 #define PPB_SPP PPB_NIBBLE|PPB_PS2
52 #define PPB_BYTE PPB_PS2
55 #define PPB_OPTIONS_MASK 0xf0
57 #define PPB_IS_EPP(mode) (mode & PPB_EPP)
58 #define PPB_IN_EPP_MODE(bus) (PPB_IS_EPP (ppb_get_mode (bus)))
59 #define PPB_IN_NIBBLE_MODE(bus) (ppb_get_mode (bus) & PPB_NIBBLE)
60 #define PPB_IN_PS2_MODE(bus) (ppb_get_mode (bus) & PPB_PS2)
62 #define n(flags) (~(flags) & (flags))
65 * Parallel Port Chipset control bits.
71 #define IRQENABLE 0x10
74 #define nSTROBE n(STROBE)
75 #define nAUTOFEED n(AUTOFEED)
77 #define nSELECTIN n(SELECTIN)
81 * Parallel Port Chipset status bits.
91 * Structure to store status information.
96 unsigned int timeout:1;
98 unsigned int select:1;
99 unsigned int paper_end:1;
104 /* Parallel port bus I/O opcodes */
105 #define PPB_OUTSB_EPP 1
106 #define PPB_OUTSW_EPP 2
107 #define PPB_OUTSL_EPP 3
108 #define PPB_INSB_EPP 4
109 #define PPB_INSW_EPP 5
110 #define PPB_INSL_EPP 6
114 #define PPB_REPP_A 10
115 #define PPB_REPP_D 11
121 #define PPB_WEPP_A 17
122 #define PPB_WEPP_D 18
127 * How tsleep() is called in ppb_request_bus().
129 #define PPB_DONTWAIT 0
134 #define PPB_FOREVER -1
137 * Microsequence stuff.
139 #define PPB_MS_MAXLEN 64 /* XXX according to MS_INS_MASK */
140 #define PPB_MS_MAXARGS 3 /* according to MS_ARG_MASK */
142 /* maximum number of mode dependent
143 * submicrosequences for in/out operations
145 #define PPB_MAX_XFER 6
151 int (* f)(void *, char *);
154 struct ppb_microseq {
155 int opcode; /* microins. opcode */
156 union ppb_insarg arg[PPB_MS_MAXARGS]; /* arguments */
159 /* microseqences used for GET/PUT operations */
161 struct ppb_microseq *loop; /* the loop microsequence */
165 * Parallel Port Bus Device structure.
167 struct ppb_data; /* see below */
170 int valid; /* 1 if the struct is valid */
171 int mode; /* XXX chipset operating mode */
173 struct microseq *curpc; /* pc in curmsq */
174 struct microseq *curmsq; /* currently executed microseqence */
178 * List of IVARS available to ppb device drivers
180 #define PPBUS_IVAR_MODE 0
181 #define PPBUS_IVAR_AVM 1
182 #define PPBUS_IVAR_IRQ 2
184 /* other fields are reserved to the ppbus internals */
188 const char *name; /* name of the device */
190 ushort mode; /* current mode of the device */
191 ushort avm; /* available IEEE1284 modes of
193 uint flags; /* flags */
195 struct ppb_context ctx; /* context of the device */
197 /* mode dependent get msq. If NULL,
198 * IEEE1284 code is used */
200 get_xfer[PPB_MAX_XFER];
202 /* mode dependent put msq. If NULL,
203 * IEEE1284 code is used */
205 put_xfer[PPB_MAX_XFER];
207 struct resource *intr_resource;
210 void *drv1, *drv2; /* drivers private data */
214 #define EPP_1_9 0x0 /* default */
217 /* Parallel Port Chipset IVARS */ /* elsewhere XXX */
218 #define PPC_IVAR_EPP_PROTO 0
219 #define PPC_IVAR_IRQ 1
222 * Maximum size of the PnP info string
224 #define PPB_PnP_STRING_SIZE 256 /* XXX */
227 * Parallel Port Bus structure.
231 #define PPB_PnP_PRINTER 0
232 #define PPB_PnP_MODEM 1
233 #define PPB_PnP_NET 2
234 #define PPB_PnP_HDC 3
235 #define PPB_PnP_PCMCIA 4
236 #define PPB_PnP_MEDIA 5
237 #define PPB_PnP_FDC 6
238 #define PPB_PnP_PORTS 7
239 #define PPB_PnP_SCANNER 8
240 #define PPB_PnP_DIGICAM 9
241 #define PPB_PnP_UNKNOWN 10
242 int class_id; /* not a PnP device if class_id < 0 */
244 int state; /* current IEEE1284 state */
245 int error; /* last IEEE1284 error */
247 int mode; /* IEEE 1284-1994 mode
248 * NIBBLE, PS2, EPP or ECP */
250 void *ppb_owner; /* device which owns the bus */
254 extern int ppb_attach_device(device_t);
255 extern int ppb_request_bus(device_t, device_t, int);
256 extern int ppb_release_bus(device_t, device_t);
258 /* bus related functions */
259 extern int ppb_get_status(device_t, struct ppb_status *);
260 extern int ppb_poll_bus(device_t, int, char, char, int);
261 extern int ppb_reset_epp_timeout(device_t);
262 extern int ppb_ecp_sync(device_t);
263 extern int ppb_get_epp_protocol(device_t);
264 extern int ppb_set_mode(device_t, int); /* returns old mode */
265 extern int ppb_get_mode(device_t); /* returns current mode */
266 extern int ppb_write(device_t, char *, int, int);
270 * These are defined as macros for speedup.
271 #define ppb_get_base_addr(dev) ((dev)->ppb->ppb_link->base)
272 #define ppb_get_epp_protocol(dev) ((dev)->ppb->ppb_link->epp_protocol)
273 #define ppb_get_irq(dev) ((dev)->ppb->ppb_link->id_irq)