2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
4 * Copyright (c) 1997-2000 Nicolas Souchu
5 * Copyright (c) 2001 Alcove - Nicolas Souchu
6 * Copyright (c) 2006 Marcel Moolenaar
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31 #include <sys/cdefs.h>
32 __FBSDID("$FreeBSD$");
34 #include <sys/param.h>
35 #include <sys/systm.h>
36 #include <sys/kernel.h>
38 #include <sys/module.h>
39 #include <sys/mutex.h>
41 #include <machine/bus.h>
42 #include <sys/malloc.h>
45 #include <isa/isavar.h>
47 #include <dev/ppbus/ppbconf.h>
48 #include <dev/ppbus/ppb_msq.h>
49 #include <dev/ppc/ppcvar.h>
50 #include <dev/ppc/ppcreg.h>
54 static int ppc_isa_probe(device_t dev);
56 int ppc_isa_attach(device_t dev);
57 int ppc_isa_write(device_t, char *, int, int);
59 static device_method_t ppc_isa_methods[] = {
60 /* device interface */
61 DEVMETHOD(device_probe, ppc_isa_probe),
62 DEVMETHOD(device_attach, ppc_isa_attach),
63 DEVMETHOD(device_detach, ppc_detach),
66 DEVMETHOD(bus_read_ivar, ppc_read_ivar),
67 DEVMETHOD(bus_write_ivar, ppc_write_ivar),
68 DEVMETHOD(bus_alloc_resource, ppc_alloc_resource),
69 DEVMETHOD(bus_release_resource, ppc_release_resource),
72 DEVMETHOD(ppbus_io, ppc_io),
73 DEVMETHOD(ppbus_exec_microseq, ppc_exec_microseq),
74 DEVMETHOD(ppbus_reset_epp, ppc_reset_epp),
75 DEVMETHOD(ppbus_setmode, ppc_setmode),
76 DEVMETHOD(ppbus_ecp_sync, ppc_ecp_sync),
77 DEVMETHOD(ppbus_read, ppc_read),
78 DEVMETHOD(ppbus_write, ppc_isa_write),
82 static driver_t ppc_isa_driver = {
85 sizeof(struct ppc_data),
88 static struct isa_pnp_id lpc_ids[] = {
89 { 0x0004d041, "Standard parallel printer port" }, /* PNP0400 */
90 { 0x0104d041, "ECP parallel printer port" }, /* PNP0401 */
95 ppc_isa_dmadone(struct ppc_data *ppc)
97 isa_dmadone(ppc->ppc_dmaflags, ppc->ppc_dmaddr, ppc->ppc_dmacnt,
102 ppc_isa_attach(device_t dev)
104 struct ppc_data *ppc = device_get_softc(dev);
106 if ((ppc->ppc_avm & PPB_ECP) && (ppc->ppc_dmachan > 0)) {
107 /* acquire the DMA channel forever */ /* XXX */
108 isa_dma_acquire(ppc->ppc_dmachan);
109 isa_dmainit(ppc->ppc_dmachan, 1024); /* nlpt.BUFSIZE */
110 ppc->ppc_dmadone = ppc_isa_dmadone;
113 return (ppc_attach(dev));
117 ppc_isa_probe(device_t dev)
122 parent = device_get_parent(dev);
124 error = ISA_PNP_PROBE(parent, dev, lpc_ids);
127 if (error != 0) /* XXX shall be set after detection */
128 device_set_desc(dev, "Parallel port");
130 return (ppc_probe(dev, 0));
134 * Call this function if you want to send data in any advanced mode
135 * of your parallel port: FIFO, DMA
137 * If what you want is not possible (no ECP, no DMA...),
141 ppc_isa_write(device_t dev, char *buf, int len, int how)
143 struct ppc_data *ppc = device_get_softc(dev);
144 char ecr, ecr_sav, ctr, ctr_sav;
148 PPC_ASSERT_LOCKED(ppc);
149 if (!(ppc->ppc_avm & PPB_ECP))
151 if (ppc->ppc_dmachan == 0)
158 ecr_sav = r_ecr(ppc);
159 ctr_sav = r_ctr(ppc);
162 * Send buffer with DMA, FIFO and interrupts
165 /* byte mode, no intr, no DMA, dir=0, flush fifo */
166 ecr = PPC_ECR_STD | PPC_DISABLE_INTR;
169 /* disable nAck interrupts */
174 ppc->ppc_dmaflags = 0;
175 ppc->ppc_dmaddr = (caddr_t)buf;
176 ppc->ppc_dmacnt = (u_int)len;
178 switch (ppc->ppc_mode) {
180 /* compatible mode with FIFO, no intr, DMA, dir=0 */
181 ecr = PPC_ECR_FIFO | PPC_DISABLE_INTR | PPC_ENABLE_DMA;
184 ecr = PPC_ECR_ECP | PPC_DISABLE_INTR | PPC_ENABLE_DMA;
194 ppc->ppc_dmastat = PPC_DMA_INIT;
196 /* enable interrupts */
197 ecr &= ~PPC_SERVICE_INTR;
198 ppc->ppc_irqstat = PPC_IRQ_DMA;
201 isa_dmastart(ppc->ppc_dmaflags, ppc->ppc_dmaddr, ppc->ppc_dmacnt,
203 ppc->ppc_dmastat = PPC_DMA_STARTED;
206 printf("s%d", ppc->ppc_dmacnt);
209 /* Wait for the DMA completed interrupt. We hope we won't
210 * miss it, otherwise a signal will be necessary to unlock the
215 error = mtx_sleep(ppc, &ppc->ppc_lock, PPBPRI | PCATCH,
217 } while (error == EWOULDBLOCK);
224 isa_dmadone(ppc->ppc_dmaflags, ppc->ppc_dmaddr,
225 ppc->ppc_dmacnt, ppc->ppc_dmachan);
227 /* no dma, no interrupt, flush the fifo */
228 w_ecr(ppc, PPC_ECR_RESET);
230 ppc->ppc_dmastat = PPC_DMA_INTERRUPTED;
234 /* wait for an empty fifo */
235 while (!(r_ecr(ppc) & PPC_FIFO_EMPTY)) {
236 for (spin=100; spin; spin--)
237 if (r_ecr(ppc) & PPC_FIFO_EMPTY)
242 error = mtx_sleep(ppc, &ppc->ppc_lock, PPBPRI | PCATCH,
243 "ppcfifo", hz / 100);
244 if (error != EWOULDBLOCK) {
248 /* no dma, no interrupt, flush the fifo */
249 w_ecr(ppc, PPC_ECR_RESET);
251 ppc->ppc_dmastat = PPC_DMA_INTERRUPTED;
258 /* no dma, no interrupt, flush the fifo */
259 w_ecr(ppc, PPC_ECR_RESET);
262 /* PDRQ must be kept unasserted until nPDACK is
263 * deasserted for a minimum of 350ns (SMC datasheet)
265 * Consequence may be a FIFO that never empty
274 DRIVER_MODULE(ppc, isa, ppc_isa_driver, ppc_devclass, 0, 0);
275 ISA_PNP_INFO(lpc_ids);