2 * Copyright (c) Comtrol Corporation <support@comtrol.com>
5 * PCI-specific part separated from:
6 * sys/i386/isa/rp.c,v 1.33 1999/09/28 11:45:27 phk Exp
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted prodived that the follwoing conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notive, this list of conditions and the following disclainer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials prodided with the distribution.
16 * 3. All advertising materials mentioning features or use of this software
17 * must display the following acknowledgement:
18 * This product includes software developed by Comtrol Corporation.
19 * 4. The name of Comtrol Corporation may not be used to endorse or
20 * promote products derived from this software without specific
21 * prior written permission.
23 * THIS SOFTWARE IS PROVIDED BY COMTROL CORPORATION ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
26 * ARE DISCLAIMED. IN NO EVENT SHALL COMTROL CORPORATION BE LIABLE FOR
27 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
28 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
29 * OR SERVICES; LOSS OF USE, DATA, LIFE OR PROFITS; OR BUSINESS INTERRUPTION)
30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
36 #include <sys/cdefs.h>
37 __FBSDID("$FreeBSD$");
39 #include <sys/param.h>
40 #include <sys/systm.h>
41 #include <sys/fcntl.h>
42 #include <sys/malloc.h>
45 #include <sys/kernel.h>
46 #include <sys/module.h>
47 #include <machine/resource.h>
48 #include <machine/bus.h>
53 #include <dev/rp/rpreg.h>
54 #include <dev/rp/rpvar.h>
56 #include <dev/pci/pcireg.h>
57 #include <dev/pci/pcivar.h>
60 #define RP_VENDOR_ID 0x11FE
61 #define RP_DEVICE_ID_32I 0x0001
62 #define RP_DEVICE_ID_8I 0x0002
63 #define RP_DEVICE_ID_16I 0x0003
64 #define RP_DEVICE_ID_4Q 0x0004
65 #define RP_DEVICE_ID_8O 0x0005
66 #define RP_DEVICE_ID_8J 0x0006
67 #define RP_DEVICE_ID_4J 0x0007
68 #define RP_DEVICE_ID_6M 0x000C
69 #define RP_DEVICE_ID_4M 0x000D
70 #define RP_DEVICE_ID_UPCI_8O 0x0805
72 /**************************************************************************
73 MUDBAC remapped for PCI
74 **************************************************************************/
76 #define _CFG_INT_PCI 0x40
77 #define _PCI_INT_FUNC 0x3A
79 #define PCI_STROB 0x2000
80 #define INTR_EN_PCI 0x0010
82 /***************************************************************************
83 Function: sPCIControllerEOI
84 Purpose: Strobe the MUDBAC's End Of Interrupt bit.
85 Call: sPCIControllerEOI(CtlP)
86 CONTROLLER_T *CtlP; Ptr to controller structure
88 #define sPCIControllerEOI(CtlP) rp_writeio2(CtlP, 0, _PCI_INT_FUNC, PCI_STROB)
90 /***************************************************************************
91 Function: sPCIGetControllerIntStatus
92 Purpose: Get the controller interrupt status
93 Call: sPCIGetControllerIntStatus(CtlP)
94 CONTROLLER_T *CtlP; Ptr to controller structure
95 Return: Byte_t: The controller interrupt status in the lower 4
96 bits. Bits 0 through 3 represent AIOP's 0
97 through 3 respectively. If a bit is set that
98 AIOP is interrupting. Bits 4 through 7 will
101 #define sPCIGetControllerIntStatus(CTLP) ((rp_readio2(CTLP, 0, _PCI_INT_FUNC) >> 8) & 0x1f)
103 static devclass_t rp_devclass;
105 static int rp_pciprobe(device_t dev);
106 static int rp_pciattach(device_t dev);
108 static int rp_pcidetach(device_t dev);
109 static int rp_pcishutdown(device_t dev);
111 static void rp_pcireleaseresource(CONTROLLER_t *ctlp);
112 static int sPCIInitController( CONTROLLER_t *CtlP,
118 static rp_aiop2rid_t rp_pci_aiop2rid;
119 static rp_aiop2off_t rp_pci_aiop2off;
120 static rp_ctlmask_t rp_pci_ctlmask;
123 * The following functions are the pci-specific part
128 rp_pciprobe(device_t dev)
133 if (pci_get_vendor(dev) == RP_VENDOR_ID)
134 s = "RocketPort PCI";
137 device_set_desc(dev, s);
138 return (BUS_PROBE_DEFAULT);
145 rp_pciattach(device_t dev)
147 int num_ports, num_aiops;
154 ctlp = device_get_softc(dev);
155 bzero(ctlp, sizeof(*ctlp));
157 unit = device_get_unit(dev);
158 ctlp->aiop2rid = rp_pci_aiop2rid;
159 ctlp->aiop2off = rp_pci_aiop2off;
160 ctlp->ctlmask = rp_pci_ctlmask;
162 /* Wake up the device. */
163 stcmd = pci_read_config(dev, PCIR_COMMAND, 4);
164 if ((stcmd & PCIM_CMD_PORTEN) == 0) {
165 stcmd |= (PCIM_CMD_PORTEN);
166 pci_write_config(dev, PCIR_COMMAND, 4, stcmd);
169 /* The IO ports of AIOPs for a PCI controller are continuous. */
171 ctlp->io_rid = malloc(sizeof(*(ctlp->io_rid)) * ctlp->io_num, M_DEVBUF, M_NOWAIT | M_ZERO);
172 ctlp->io = malloc(sizeof(*(ctlp->io)) * ctlp->io_num, M_DEVBUF, M_NOWAIT | M_ZERO);
173 if (ctlp->io_rid == NULL || ctlp->io == NULL) {
174 device_printf(dev, "rp_pciattach: Out of memory.\n");
179 ctlp->bus_ctlp = NULL;
181 switch (pci_get_device(dev)) {
182 case RP_DEVICE_ID_UPCI_8O:
183 ctlp->io_rid[0] = PCIR_BAR(2);
186 ctlp->io_rid[0] = PCIR_BAR(0);
189 ctlp->io[0] = bus_alloc_resource_any(dev, SYS_RES_IOPORT,
190 &ctlp->io_rid[0], RF_ACTIVE);
191 if(ctlp->io[0] == NULL) {
192 device_printf(dev, "ioaddr mapping failed for RocketPort(PCI).\n");
197 num_aiops = sPCIInitController(ctlp,
198 MAX_AIOPS_PER_BOARD, 0,
199 FREQ_DIS, 0, pci_get_device(dev));
202 for(aiop=0; aiop < num_aiops; aiop++) {
203 sResetAiopByNum(ctlp, aiop);
204 num_ports += sGetAiopNumChan(ctlp, aiop);
207 retval = rp_attachcommon(ctlp, num_aiops, num_ports);
214 rp_pcireleaseresource(ctlp);
220 rp_pcidetach(device_t dev)
224 if (device_get_state(dev) == DS_BUSY)
227 ctlp = device_get_softc(dev);
229 rp_pcireleaseresource(ctlp);
235 rp_pcishutdown(device_t dev)
239 if (device_get_state(dev) == DS_BUSY)
242 ctlp = device_get_softc(dev);
244 rp_pcireleaseresource(ctlp);
250 rp_pcireleaseresource(CONTROLLER_t *ctlp)
253 if (ctlp->io != NULL) {
254 if (ctlp->io[0] != NULL)
255 bus_release_resource(ctlp->dev, SYS_RES_IOPORT, ctlp->io_rid[0], ctlp->io[0]);
256 free(ctlp->io, M_DEVBUF);
259 if (ctlp->io_rid != NULL) {
260 free(ctlp->io_rid, M_DEVBUF);
263 rp_releaseresource(ctlp);
267 sPCIInitController( CONTROLLER_t *CtlP,
276 CtlP->CtlID = CTLID_0001; /* controller release 1 */
278 sPCIControllerEOI(CtlP);
282 for(i=0; i < AiopNum; i++)
284 /*device_printf(CtlP->dev, "aiop %d.\n", i);*/
285 CtlP->AiopID[i] = sReadAiopID(CtlP, i); /* read AIOP ID */
286 /*device_printf(CtlP->dev, "ID = %d.\n", CtlP->AiopID[i]);*/
287 if(CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */
289 break; /* done looking for AIOPs */
292 switch( VendorDevice ) {
293 case RP_DEVICE_ID_4Q:
294 case RP_DEVICE_ID_4J:
295 case RP_DEVICE_ID_4M:
296 CtlP->AiopNumChan[i] = 4;
298 case RP_DEVICE_ID_6M:
299 CtlP->AiopNumChan[i] = 6;
301 case RP_DEVICE_ID_8O:
302 case RP_DEVICE_ID_8J:
303 case RP_DEVICE_ID_8I:
304 case RP_DEVICE_ID_16I:
305 case RP_DEVICE_ID_32I:
306 CtlP->AiopNumChan[i] = 8;
310 CtlP->AiopNumChan[i] = 8;
312 CtlP->AiopNumChan[i] = sReadAiopNumChan(CtlP, i);
316 /*device_printf(CtlP->dev, "%d channels.\n", CtlP->AiopNumChan[i]);*/
317 rp_writeaiop2(CtlP, i, _INDX_ADDR,_CLK_PRE); /* clock prescaler */
318 /*device_printf(CtlP->dev, "configuring clock prescaler.\n");*/
319 rp_writeaiop1(CtlP, i, _INDX_DATA,CLOCK_PRESC);
320 /*device_printf(CtlP->dev, "configured clock prescaler.\n");*/
321 CtlP->NumAiop++; /* bump count of AIOPs */
324 if(CtlP->NumAiop == 0)
327 return(CtlP->NumAiop);
332 * Maps (aiop, offset) to rid.
335 rp_pci_aiop2rid(int aiop, int offset)
337 /* Always return zero for a PCI controller. */
343 * Maps (aiop, offset) to the offset of resource.
346 rp_pci_aiop2off(int aiop, int offset)
348 /* Each AIOP reserves 0x40 bytes. */
349 return aiop * 0x40 + offset;
352 /* Read the int status for a PCI controller. */
354 rp_pci_ctlmask(CONTROLLER_t *ctlp)
356 return sPCIGetControllerIntStatus(ctlp);
359 static device_method_t rp_pcimethods[] = {
360 /* Device interface */
361 DEVMETHOD(device_probe, rp_pciprobe),
362 DEVMETHOD(device_attach, rp_pciattach),
363 DEVMETHOD(device_detach, rp_pcidetach),
364 DEVMETHOD(device_shutdown, rp_pcishutdown),
369 static driver_t rp_pcidriver = {
372 sizeof(CONTROLLER_t),
376 * rp can be attached to a pci bus.
378 DRIVER_MODULE(rp, pci, rp_pcidriver, rp_devclass, 0, 0);