]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/dev/sdhci/sdhci.h
cxgbe(4): Make sure the rx queues start off with the correct timestamp
[FreeBSD/FreeBSD.git] / sys / dev / sdhci / sdhci.h
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
3  *
4  * Copyright (c) 2008 Alexander Motin <mav@FreeBSD.org>
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
17  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
18  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
19  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
20  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
21  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
22  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
23  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
24  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
25  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
26  *
27  * $FreeBSD$
28  */
29
30 #ifndef __SDHCI_H__
31 #define __SDHCI_H__
32
33 #include "opt_mmccam.h"
34
35 #define DMA_BLOCK_SIZE  4096
36 #define DMA_BOUNDARY    0       /* DMA reload every 4K */
37
38 /* Controller doesn't honor resets unless we touch the clock register */
39 #define SDHCI_QUIRK_CLOCK_BEFORE_RESET                  (1 << 0)
40 /* Controller really supports DMA */
41 #define SDHCI_QUIRK_FORCE_DMA                           (1 << 1)
42 /* Controller has unusable DMA engine */
43 #define SDHCI_QUIRK_BROKEN_DMA                          (1 << 2)
44 /* Controller doesn't like to be reset when there is no card inserted. */
45 #define SDHCI_QUIRK_NO_CARD_NO_RESET                    (1 << 3)
46 /* Controller has flaky internal state so reset it on each ios change */
47 #define SDHCI_QUIRK_RESET_ON_IOS                        (1 << 4)
48 /* Controller can only DMA chunk sizes that are a multiple of 32 bits */
49 #define SDHCI_QUIRK_32BIT_DMA_SIZE                      (1 << 5)
50 /* Controller needs to be reset after each request to stay stable */
51 #define SDHCI_QUIRK_RESET_AFTER_REQUEST                 (1 << 6)
52 /* Controller has an off-by-one issue with timeout value */
53 #define SDHCI_QUIRK_INCR_TIMEOUT_CONTROL                (1 << 7)
54 /* Controller has broken read timings */
55 #define SDHCI_QUIRK_BROKEN_TIMINGS                      (1 << 8)
56 /* Controller needs lowered frequency */
57 #define SDHCI_QUIRK_LOWER_FREQUENCY                     (1 << 9)
58 /* Data timeout is invalid, should use SD clock */
59 #define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK             (1 << 10)
60 /* Timeout value is invalid, should be overriden */
61 #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL                  (1 << 11)
62 /* SDHCI_CAPABILITIES is invalid */
63 #define SDHCI_QUIRK_MISSING_CAPS                        (1 << 12)
64 /* Hardware shifts the 136-bit response, don't do it in software. */
65 #define SDHCI_QUIRK_DONT_SHIFT_RESPONSE                 (1 << 13)
66 /* Wait to see reset bit asserted before waiting for de-asserted  */
67 #define SDHCI_QUIRK_WAITFOR_RESET_ASSERTED              (1 << 14)
68 /* Leave controller in standard mode when putting card in HS mode. */
69 #define SDHCI_QUIRK_DONT_SET_HISPD_BIT                  (1 << 15)
70 /* Alternate clock source is required when supplying a 400 KHz clock. */
71 #define SDHCI_QUIRK_BCM577XX_400KHZ_CLKSRC              (1 << 16)
72 /* Card insert/remove interrupts don't work, polling required. */
73 #define SDHCI_QUIRK_POLL_CARD_PRESENT                   (1 << 17)
74 /* All controller slots are non-removable. */
75 #define SDHCI_QUIRK_ALL_SLOTS_NON_REMOVABLE             (1 << 18)
76 /* Issue custom Intel controller reset sequence after power-up. */
77 #define SDHCI_QUIRK_INTEL_POWER_UP_RESET                (1 << 19)
78 /* Data timeout is invalid, use 1 MHz clock instead. */
79 #define SDHCI_QUIRK_DATA_TIMEOUT_1MHZ                   (1 << 20)
80 /* Controller doesn't allow access boot partitions. */
81 #define SDHCI_QUIRK_BOOT_NOACC                          (1 << 21)
82 /* Controller waits for busy responses. */
83 #define SDHCI_QUIRK_WAIT_WHILE_BUSY                     (1 << 22)
84 /* Controller supports eMMC DDR52 mode. */
85 #define SDHCI_QUIRK_MMC_DDR52                           (1 << 23)
86 /* Controller support for UHS DDR50 mode is broken. */
87 #define SDHCI_QUIRK_BROKEN_UHS_DDR50                    (1 << 24)
88 /* Controller support for eMMC HS200 mode is broken. */
89 #define SDHCI_QUIRK_BROKEN_MMC_HS200                    (1 << 25)
90 /* Controller reports support for eMMC HS400 mode as SDHCI_CAN_MMC_HS400. */
91 #define SDHCI_QUIRK_CAPS_BIT63_FOR_MMC_HS400            (1 << 26)
92 /* Controller support for SDHCI_CTRL2_PRESET_VALUE is broken. */
93 #define SDHCI_QUIRK_PRESET_VALUE_BROKEN                 (1 << 27)
94 /* Controller does not support or the support for ACMD12 is broken. */
95 #define SDHCI_QUIRK_BROKEN_AUTO_STOP                    (1 << 28)
96 /* Controller supports eMMC HS400 mode if SDHCI_CAN_SDR104 is set. */
97 #define SDHCI_QUIRK_MMC_HS400_IF_CAN_SDR104             (1 << 29)
98
99 /*
100  * Controller registers
101  */
102 #define SDHCI_DMA_ADDRESS       0x00
103
104 #define SDHCI_BLOCK_SIZE        0x04
105 #define  SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
106
107 #define SDHCI_BLOCK_COUNT       0x06
108
109 #define SDHCI_ARGUMENT          0x08
110
111 #define SDHCI_TRANSFER_MODE     0x0C
112 #define  SDHCI_TRNS_DMA         0x01
113 #define  SDHCI_TRNS_BLK_CNT_EN  0x02
114 #define  SDHCI_TRNS_ACMD12      0x04
115 #define  SDHCI_TRNS_READ        0x10
116 #define  SDHCI_TRNS_MULTI       0x20
117
118 #define SDHCI_COMMAND_FLAGS     0x0E
119 #define  SDHCI_CMD_RESP_NONE    0x00
120 #define  SDHCI_CMD_RESP_LONG    0x01
121 #define  SDHCI_CMD_RESP_SHORT   0x02
122 #define  SDHCI_CMD_RESP_SHORT_BUSY 0x03
123 #define  SDHCI_CMD_RESP_MASK    0x03
124 #define  SDHCI_CMD_CRC          0x08
125 #define  SDHCI_CMD_INDEX        0x10
126 #define  SDHCI_CMD_DATA         0x20
127 #define  SDHCI_CMD_TYPE_NORMAL  0x00
128 #define  SDHCI_CMD_TYPE_SUSPEND 0x40
129 #define  SDHCI_CMD_TYPE_RESUME  0x80
130 #define  SDHCI_CMD_TYPE_ABORT   0xc0
131 #define  SDHCI_CMD_TYPE_MASK    0xc0
132
133 #define SDHCI_COMMAND           0x0F
134
135 #define SDHCI_RESPONSE          0x10
136
137 #define SDHCI_BUFFER            0x20
138
139 #define SDHCI_PRESENT_STATE     0x24
140 #define  SDHCI_CMD_INHIBIT      0x00000001
141 #define  SDHCI_DAT_INHIBIT      0x00000002
142 #define  SDHCI_DAT_ACTIVE       0x00000004
143 #define  SDHCI_RETUNE_REQUEST   0x00000008
144 #define  SDHCI_DOING_WRITE      0x00000100
145 #define  SDHCI_DOING_READ       0x00000200
146 #define  SDHCI_SPACE_AVAILABLE  0x00000400
147 #define  SDHCI_DATA_AVAILABLE   0x00000800
148 #define  SDHCI_CARD_PRESENT     0x00010000
149 #define  SDHCI_CARD_STABLE      0x00020000
150 #define  SDHCI_CARD_PIN         0x00040000
151 #define  SDHCI_WRITE_PROTECT    0x00080000
152 #define  SDHCI_STATE_DAT_MASK   0x00f00000
153 #define  SDHCI_STATE_CMD        0x01000000
154
155 #define SDHCI_HOST_CONTROL      0x28
156 #define  SDHCI_CTRL_LED         0x01
157 #define  SDHCI_CTRL_4BITBUS     0x02
158 #define  SDHCI_CTRL_HISPD       0x04
159 #define  SDHCI_CTRL_SDMA        0x08
160 #define  SDHCI_CTRL_ADMA2       0x10
161 #define  SDHCI_CTRL_ADMA264     0x18
162 #define  SDHCI_CTRL_DMA_MASK    0x18
163 #define  SDHCI_CTRL_8BITBUS     0x20
164 #define  SDHCI_CTRL_CARD_DET    0x40
165 #define  SDHCI_CTRL_FORCE_CARD  0x80
166
167 #define SDHCI_POWER_CONTROL     0x29
168 #define  SDHCI_POWER_ON         0x01
169 #define  SDHCI_POWER_180        0x0A
170 #define  SDHCI_POWER_300        0x0C
171 #define  SDHCI_POWER_330        0x0E
172
173 #define SDHCI_BLOCK_GAP_CONTROL 0x2A
174
175 #define SDHCI_WAKE_UP_CONTROL   0x2B
176
177 #define SDHCI_CLOCK_CONTROL     0x2C
178 #define  SDHCI_DIVIDER_MASK     0xff
179 #define  SDHCI_DIVIDER_MASK_LEN 8
180 #define  SDHCI_DIVIDER_SHIFT    8
181 #define  SDHCI_DIVIDER_HI_MASK  3
182 #define  SDHCI_DIVIDER_HI_SHIFT 6
183 #define  SDHCI_CLOCK_CARD_EN    0x0004
184 #define  SDHCI_CLOCK_INT_STABLE 0x0002
185 #define  SDHCI_CLOCK_INT_EN     0x0001
186 #define  SDHCI_DIVIDERS_MASK    \
187     ((SDHCI_DIVIDER_MASK << SDHCI_DIVIDER_SHIFT) | \
188     (SDHCI_DIVIDER_HI_MASK << SDHCI_DIVIDER_HI_SHIFT))
189
190 #define SDHCI_TIMEOUT_CONTROL   0x2E
191
192 #define SDHCI_SOFTWARE_RESET    0x2F
193 #define  SDHCI_RESET_ALL        0x01
194 #define  SDHCI_RESET_CMD        0x02
195 #define  SDHCI_RESET_DATA       0x04
196
197 #define SDHCI_INT_STATUS        0x30
198 #define SDHCI_INT_ENABLE        0x34
199 #define SDHCI_SIGNAL_ENABLE     0x38
200 #define  SDHCI_INT_RESPONSE     0x00000001
201 #define  SDHCI_INT_DATA_END     0x00000002
202 #define  SDHCI_INT_BLOCK_GAP    0x00000004
203 #define  SDHCI_INT_DMA_END      0x00000008
204 #define  SDHCI_INT_SPACE_AVAIL  0x00000010
205 #define  SDHCI_INT_DATA_AVAIL   0x00000020
206 #define  SDHCI_INT_CARD_INSERT  0x00000040
207 #define  SDHCI_INT_CARD_REMOVE  0x00000080
208 #define  SDHCI_INT_CARD_INT     0x00000100
209 #define  SDHCI_INT_INT_A        0x00000200
210 #define  SDHCI_INT_INT_B        0x00000400
211 #define  SDHCI_INT_INT_C        0x00000800
212 #define  SDHCI_INT_RETUNE       0x00001000
213 #define  SDHCI_INT_ERROR        0x00008000
214 #define  SDHCI_INT_TIMEOUT      0x00010000
215 #define  SDHCI_INT_CRC          0x00020000
216 #define  SDHCI_INT_END_BIT      0x00040000
217 #define  SDHCI_INT_INDEX        0x00080000
218 #define  SDHCI_INT_DATA_TIMEOUT 0x00100000
219 #define  SDHCI_INT_DATA_CRC     0x00200000
220 #define  SDHCI_INT_DATA_END_BIT 0x00400000
221 #define  SDHCI_INT_BUS_POWER    0x00800000
222 #define  SDHCI_INT_ACMD12ERR    0x01000000
223 #define  SDHCI_INT_ADMAERR      0x02000000
224 #define  SDHCI_INT_TUNEERR      0x04000000
225
226 #define  SDHCI_INT_NORMAL_MASK  0x00007FFF
227 #define  SDHCI_INT_ERROR_MASK   0xFFFF8000
228
229 #define  SDHCI_INT_CMD_ERROR_MASK       (SDHCI_INT_TIMEOUT | \
230                 SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)
231
232 #define  SDHCI_INT_CMD_MASK     (SDHCI_INT_RESPONSE | SDHCI_INT_CMD_ERROR_MASK)
233
234 #define  SDHCI_INT_DATA_MASK    (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
235                 SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
236                 SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
237                 SDHCI_INT_DATA_END_BIT)
238
239 #define SDHCI_ACMD12_ERR        0x3C
240
241 #define SDHCI_HOST_CONTROL2     0x3E
242 #define  SDHCI_CTRL2_PRESET_VALUE       0x8000
243 #define  SDHCI_CTRL2_ASYNC_INTR 0x4000
244 #define  SDHCI_CTRL2_64BIT_ENABLE       0x2000
245 #define  SDHCI_CTRL2_HOST_V4_ENABLE     0x1000
246 #define  SDHCI_CTRL2_CMD23_ENABLE       0x0800
247 #define  SDHCI_CTRL2_ADMA2_LENGTH_MODE  0x0400
248 #define  SDHCI_CTRL2_UHS2_IFACE_ENABLE  0x0100
249 #define  SDHCI_CTRL2_SAMPLING_CLOCK     0x0080
250 #define  SDHCI_CTRL2_EXEC_TUNING        0x0040
251 #define  SDHCI_CTRL2_DRIVER_TYPE_MASK   0x0030
252 #define  SDHCI_CTRL2_DRIVER_TYPE_B      0x0000
253 #define  SDHCI_CTRL2_DRIVER_TYPE_A      0x0010
254 #define  SDHCI_CTRL2_DRIVER_TYPE_C      0x0020
255 #define  SDHCI_CTRL2_DRIVER_TYPE_D      0x0030
256 #define  SDHCI_CTRL2_S18_ENABLE 0x0008
257 #define  SDHCI_CTRL2_UHS_MASK   0x0007
258 #define  SDHCI_CTRL2_UHS_SDR12  0x0000
259 #define  SDHCI_CTRL2_UHS_SDR25  0x0001
260 #define  SDHCI_CTRL2_UHS_SDR50  0x0002
261 #define  SDHCI_CTRL2_UHS_SDR104 0x0003
262 #define  SDHCI_CTRL2_UHS_DDR50  0x0004
263 #define  SDHCI_CTRL2_MMC_HS400  0x0005  /* non-standard */
264
265 #define SDHCI_CAPABILITIES      0x40
266 #define  SDHCI_TIMEOUT_CLK_MASK 0x0000003F
267 #define  SDHCI_TIMEOUT_CLK_SHIFT 0
268 #define  SDHCI_TIMEOUT_CLK_UNIT 0x00000080
269 #define  SDHCI_CLOCK_BASE_MASK  0x00003F00
270 #define  SDHCI_CLOCK_V3_BASE_MASK       0x0000FF00
271 #define  SDHCI_CLOCK_BASE_SHIFT 8
272 #define  SDHCI_MAX_BLOCK_MASK   0x00030000
273 #define  SDHCI_MAX_BLOCK_SHIFT  16
274 #define  SDHCI_CAN_DO_8BITBUS   0x00040000
275 #define  SDHCI_CAN_DO_ADMA2     0x00080000
276 #define  SDHCI_CAN_DO_HISPD     0x00200000
277 #define  SDHCI_CAN_DO_DMA       0x00400000
278 #define  SDHCI_CAN_DO_SUSPEND   0x00800000
279 #define  SDHCI_CAN_VDD_330      0x01000000
280 #define  SDHCI_CAN_VDD_300      0x02000000
281 #define  SDHCI_CAN_VDD_180      0x04000000
282 #define  SDHCI_CAN_DO_64BIT     0x10000000
283 #define  SDHCI_CAN_ASYNC_INTR   0x20000000
284 #define  SDHCI_SLOTTYPE_MASK    0xC0000000
285 #define  SDHCI_SLOTTYPE_REMOVABLE       0x00000000
286 #define  SDHCI_SLOTTYPE_EMBEDDED        0x40000000
287 #define  SDHCI_SLOTTYPE_SHARED  0x80000000
288
289 #define SDHCI_CAPABILITIES2     0x44
290 #define  SDHCI_CAN_SDR50        0x00000001
291 #define  SDHCI_CAN_SDR104       0x00000002
292 #define  SDHCI_CAN_DDR50        0x00000004
293 #define  SDHCI_CAN_DRIVE_TYPE_A 0x00000010
294 #define  SDHCI_CAN_DRIVE_TYPE_C 0x00000020
295 #define  SDHCI_CAN_DRIVE_TYPE_D 0x00000040
296 #define  SDHCI_RETUNE_CNT_MASK  0x00000F00
297 #define  SDHCI_RETUNE_CNT_SHIFT 8
298 #define  SDHCI_TUNE_SDR50       0x00002000
299 #define  SDHCI_RETUNE_MODES_MASK  0x0000C000
300 #define  SDHCI_RETUNE_MODES_SHIFT 14
301 #define  SDHCI_CLOCK_MULT_MASK  0x00FF0000
302 #define  SDHCI_CLOCK_MULT_SHIFT 16
303 #define  SDHCI_CAN_MMC_HS400    0x80000000      /* non-standard */
304
305 #define SDHCI_MAX_CURRENT       0x48
306 #define SDHCI_FORCE_AUTO_EVENT  0x50
307 #define SDHCI_FORCE_INTR_EVENT  0x52
308
309 #define SDHCI_ADMA_ERR          0x54
310 #define  SDHCI_ADMA_ERR_LENGTH  0x04
311 #define  SDHCI_ADMA_ERR_STATE_MASK      0x03
312 #define  SDHCI_ADMA_ERR_STATE_STOP      0x00
313 #define  SDHCI_ADMA_ERR_STATE_FDS       0x01
314 #define  SDHCI_ADMA_ERR_STATE_TFR       0x03
315
316 #define SDHCI_ADMA_ADDRESS_LO   0x58
317 #define SDHCI_ADMA_ADDRESS_HI   0x5C
318
319 #define SDHCI_PRESET_VALUE      0x60
320 #define SDHCI_SHARED_BUS_CTRL   0xE0
321
322 #define SDHCI_SLOT_INT_STATUS   0xFC
323
324 #define SDHCI_HOST_VERSION      0xFE
325 #define  SDHCI_VENDOR_VER_MASK  0xFF00
326 #define  SDHCI_VENDOR_VER_SHIFT 8
327 #define  SDHCI_SPEC_VER_MASK    0x00FF
328 #define  SDHCI_SPEC_VER_SHIFT   0
329 #define SDHCI_SPEC_100          0
330 #define SDHCI_SPEC_200          1
331 #define SDHCI_SPEC_300          2
332 #define SDHCI_SPEC_400          3
333 #define SDHCI_SPEC_410          4
334 #define SDHCI_SPEC_420          5
335
336 SYSCTL_DECL(_hw_sdhci);
337
338 extern u_int sdhci_quirk_clear;
339 extern u_int sdhci_quirk_set;
340
341 struct sdhci_slot {
342         struct mtx      mtx;            /* Slot mutex */
343         u_int           quirks;         /* Chip specific quirks */
344         u_int           caps;           /* Override SDHCI_CAPABILITIES */
345         u_int           caps2;          /* Override SDHCI_CAPABILITIES2 */
346         device_t        bus;            /* Bus device */
347         device_t        dev;            /* Slot device */
348         u_char          num;            /* Slot number */
349         u_char          opt;            /* Slot options */
350 #define SDHCI_HAVE_DMA                  0x01
351 #define SDHCI_PLATFORM_TRANSFER         0x02
352 #define SDHCI_NON_REMOVABLE             0x04
353 #define SDHCI_TUNING_SUPPORTED          0x08
354 #define SDHCI_TUNING_ENABLED            0x10
355 #define SDHCI_SDR50_NEEDS_TUNING        0x20
356 #define SDHCI_SLOT_EMBEDDED             0x40
357         u_char          version;
358         int             timeout;        /* Transfer timeout */
359         uint32_t        max_clk;        /* Max possible freq */
360         uint32_t        timeout_clk;    /* Timeout freq */
361         bus_dma_tag_t   dmatag;
362         bus_dmamap_t    dmamap;
363         u_char          *dmamem;
364         bus_addr_t      paddr;          /* DMA buffer address */
365         struct task     card_task;      /* Card presence check task */
366         struct timeout_task
367                         card_delayed_task;/* Card insert delayed task */
368         struct callout  card_poll_callout;/* Card present polling callout */
369         struct callout  timeout_callout;/* Card command/data response timeout */
370         struct callout  retune_callout; /* Re-tuning mode 1 callout */
371         struct mmc_host host;           /* Host parameters */
372         struct mmc_request *req;        /* Current request */
373         struct mmc_command *curcmd;     /* Current command of current request */
374
375         struct mmc_request *tune_req;   /* Tuning request */
376         struct mmc_command *tune_cmd;   /* Tuning command of tuning request */
377         struct mmc_data *tune_data;     /* Tuning data of tuning command */
378         uint32_t        retune_ticks;   /* Re-tuning callout ticks [hz] */
379         uint32_t        intmask;        /* Current interrupt mask */
380         uint32_t        clock;          /* Current clock freq. */
381         size_t          offset;         /* Data buffer offset */
382         uint8_t         hostctrl;       /* Current host control register */
383         uint8_t         retune_count;   /* Controller re-tuning count [s] */
384         uint8_t         retune_mode;    /* Controller re-tuning mode */
385 #define SDHCI_RETUNE_MODE_1     0x00
386 #define SDHCI_RETUNE_MODE_2     0x01
387 #define SDHCI_RETUNE_MODE_3     0x02
388         uint8_t         retune_req;     /* Re-tuning request status */
389 #define SDHCI_RETUNE_REQ_NEEDED 0x01    /* Re-tuning w/o circuit reset needed */
390 #define SDHCI_RETUNE_REQ_RESET  0x02    /* Re-tuning w/ circuit reset needed */
391         u_char          power;          /* Current power */
392         u_char          bus_busy;       /* Bus busy status */
393         u_char          cmd_done;       /* CMD command part done flag */
394         u_char          data_done;      /* DAT command part done flag */
395         u_char          flags;          /* Request execution flags */
396 #define CMD_STARTED             1
397 #define STOP_STARTED            2
398 #define SDHCI_USE_DMA           4       /* Use DMA for this req. */
399 #define PLATFORM_DATA_STARTED   8       /* Data xfer is handled by platform */
400
401 #ifdef MMCCAM
402         /* CAM stuff */
403         union ccb       *ccb;
404         struct cam_devq         *devq;
405         struct cam_sim          *sim;
406         struct mtx              sim_mtx;
407         u_char                  card_present; /* XXX Maybe derive this from elsewhere? */
408 #endif
409 };
410
411 int sdhci_generic_read_ivar(device_t bus, device_t child, int which,
412     uintptr_t *result);
413 int sdhci_generic_write_ivar(device_t bus, device_t child, int which,
414     uintptr_t value);
415 int sdhci_init_slot(device_t dev, struct sdhci_slot *slot, int num);
416 void sdhci_start_slot(struct sdhci_slot *slot);
417 /* performs generic clean-up for platform transfers */
418 void sdhci_finish_data(struct sdhci_slot *slot);
419 int sdhci_cleanup_slot(struct sdhci_slot *slot);
420 int sdhci_generic_suspend(struct sdhci_slot *slot);
421 int sdhci_generic_resume(struct sdhci_slot *slot);
422 int sdhci_generic_update_ios(device_t brdev, device_t reqdev);
423 int sdhci_generic_tune(device_t brdev, device_t reqdev, bool hs400);
424 int sdhci_generic_switch_vccq(device_t brdev, device_t reqdev);
425 int sdhci_generic_retune(device_t brdev, device_t reqdev, bool reset);
426 int sdhci_generic_request(device_t brdev, device_t reqdev,
427     struct mmc_request *req);
428 int sdhci_generic_get_ro(device_t brdev, device_t reqdev);
429 int sdhci_generic_acquire_host(device_t brdev, device_t reqdev);
430 int sdhci_generic_release_host(device_t brdev, device_t reqdev);
431 void sdhci_generic_intr(struct sdhci_slot *slot);
432 uint32_t sdhci_generic_min_freq(device_t brdev, struct sdhci_slot *slot);
433 bool sdhci_generic_get_card_present(device_t brdev, struct sdhci_slot *slot);
434 void sdhci_generic_set_uhs_timing(device_t brdev, struct sdhci_slot *slot);
435 void sdhci_handle_card_present(struct sdhci_slot *slot, bool is_present);
436
437 #endif  /* __SDHCI_H__ */