2 * Device driver for Specialix range (SI/XIO) of serial line multiplexors.
4 * Copyright (C) 2000, Peter Wemm <peter@netplex.com.au>
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notices, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notices, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
15 * THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED
16 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
17 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
18 * NO EVENT SHALL THE AUTHORS BE LIABLE.
23 #include <sys/param.h>
24 #include <sys/systm.h>
25 #include <sys/kernel.h>
27 #include <machine/bus.h>
29 #include <machine/resource.h>
31 #include <dev/si/sireg.h>
32 #include <dev/si/sivar.h>
34 #include <dev/eisa/eisaconf.h>
37 si_eisa_probe(device_t dev)
43 if (eisa_get_id(dev) != SIEISADEVID)
46 device_set_desc(dev, "Specialix SI/XIO EISA host card");
48 iobase = (eisa_get_slot(dev) * EISA_SLOT_SIZE) + SIEISABASE;
49 eisa_add_iospace(dev, iobase, SIEISAIOSIZE, RESVADDR_NONE);
51 maddr = (inb(iobase+1) << 24) | (inb(iobase) << 16);
52 eisa_add_mspace(dev, maddr, SIEISA_MEMSIZE, RESVADDR_NONE);
54 irq = ((inb(iobase+2) >> 4) & 0xf);
55 eisa_add_intr(dev, irq, EISA_TRIGGER_LEVEL); /* XXX shared? */
61 si_eisa_attach(device_t dev)
69 sc = device_get_softc(dev);
74 sc->sc_port_res = bus_alloc_resource(dev, SYS_RES_IOPORT,
77 if (!sc->sc_port_res) {
78 device_printf(dev, "couldn't allocate ioports\n");
81 sc->sc_iobase = rman_get_start(sc->sc_port_res);
84 sc->sc_mem_res = bus_alloc_resource(dev, SYS_RES_MEMORY,
87 if (!sc->sc_mem_res) {
88 device_printf(dev, "couldn't allocate iomemory");
91 sc->sc_paddr = (caddr_t)rman_get_start(sc->sc_mem_res);
92 sc->sc_maddr = rman_get_virtual(sc->sc_mem_res);
95 sc->sc_irq_res = bus_alloc_resource(dev, SYS_RES_IRQ, &sc->sc_irq_rid,
96 0, ~0, 1, RF_ACTIVE | RF_SHAREABLE);
97 if (!sc->sc_irq_res) {
98 device_printf(dev, "couldn't allocate interrupt");
101 sc->sc_irq = rman_get_start(sc->sc_irq_res);
102 error = bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_TTY,
105 device_printf(dev, "couldn't activate interrupt");
109 error = siattach(dev);
112 return (0); /* success */
117 if (sc->sc_irq_res) {
119 bus_teardown_intr(dev, sc->sc_irq_res, ih);
120 bus_release_resource(dev, SYS_RES_IRQ,
121 sc->sc_irq_rid, sc->sc_irq_res);
124 if (sc->sc_mem_res) {
125 bus_release_resource(dev, SYS_RES_MEMORY,
126 sc->sc_mem_rid, sc->sc_mem_res);
129 if (sc->sc_port_res) {
130 bus_release_resource(dev, SYS_RES_IOPORT,
131 sc->sc_port_rid, sc->sc_port_res);
137 static device_method_t si_eisa_methods[] = {
138 /* Device interface */
139 DEVMETHOD(device_probe, si_eisa_probe),
140 DEVMETHOD(device_attach, si_eisa_attach),
145 static driver_t si_eisa_driver = {
148 sizeof(struct si_softc),
151 DRIVER_MODULE(si, eisa, si_eisa_driver, si_devclass, 0, 0);