Protect from infinite sw-reset loop in mlx5core.

[FreeBSD/FreeBSD.git] / sys / dev / smartpqi / smartpqi_defines.h

/*-
 * Copyright (c) 2018 Microsemi Corporation.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

/* $FreeBSD$ */

#ifndef _PQI_DEFINES_H
#define _PQI_DEFINES_H

#define PQI_STATUS_FAILURE                      -1
#define PQI_STATUS_TIMEOUT                      -2
#define PQI_STATUS_QFULL                        -3
#define PQI_STATUS_SUCCESS                      0

#define PQISRC_CMD_TIMEOUT_CNT                  1200000 /* 500usec * 1200000 = 5 min  */
#define PQI_CMND_COMPLETE_TMO                   1000 /* in millisecond  */

#define INVALID_ELEM                            0xffff
#ifndef MIN
#define MIN(a,b)                                ((a) < (b) ? (a) : (b))
#endif

#ifndef MAX
#define MAX(a,b)                                ((a) > (b) ? (a) : (b))
#endif

#define PQISRC_ROUNDUP(x, y)                    (((x) + (y) - 1) / (y) * (y))
#define PQISRC_DIV_ROUND_UP(x, y)               (((x) + (y) - 1) / (y))

#define ALIGN_BOUNDARY(a, n)    {       \
                if (a % n)      \
                        a = a + (n - a % n);    \
        }

/* Busy wait timeout on a condition */
#define COND_BUSYWAIT(cond, timeout /* in millisecond */) { \
                if (!(cond)) { \
                        while (timeout) { \
                                OS_BUSYWAIT(1000); \
                                if (cond) \
                                        break; \
                                timeout--; \
                        } \
                } \
        }

/* Wait timeout on a condition*/
#define COND_WAIT(cond, timeout /* in millisecond */) { \
                if (!(cond)) { \
                        while (timeout) { \
                                OS_SLEEP(1000); \
                                if (cond) \
                                        break; \
                                timeout--; \
                        } \
                } \
        }
        
#define FILL_QUEUE_ARRAY_ADDR(q,virt,dma) {     \
                        q->array_virt_addr = virt;      \
                        q->array_dma_addr = dma;        \
                }

#define true    1
#define false   0

enum INTR_TYPE {
        LOCK_INTR,              
        LOCK_SLEEP
};

#define LOCKNAME_SIZE           32

#define INTR_TYPE_NONE          0x0
#define INTR_TYPE_FIXED         0x1
#define INTR_TYPE_MSI           0x2
#define INTR_TYPE_MSIX          0x4
#define SIS_ENABLE_MSIX         0x40
#define SIS_ENABLE_INTX         0x80
#define PQISRC_LEGACY_INTX_MASK 0x1

#define DMA_TO_VIRT(mem)        ((mem)->virt_addr)
#define DMA_PHYS_LOW(mem)       (((mem)->dma_addr)  & 0x00000000ffffffff)
#define DMA_PHYS_HIGH(mem)      ((((mem)->dma_addr) & 0xffffffff00000000) >> 32)


typedef enum REQUEST_STATUS {
        REQUEST_SUCCESS = 0,
        REQUEST_PENDING = -1,
        REQUEST_FAILED = -2,
}REQUEST_STATUS_T;

typedef enum IO_PATH {
        AIO_PATH,
        RAID_PATH
}IO_PATH_T;

typedef enum device_type
{
        DISK_DEVICE,
        TAPE_DEVICE,
        ROM_DEVICE = 5,
        SES_DEVICE,
        CONTROLLER_DEVICE,
        MEDIUM_CHANGER_DEVICE,
        RAID_DEVICE = 0x0c,
        ENCLOSURE_DEVICE,
        ZBC_DEVICE = 0x14
} device_type_t;

typedef enum controller_state {
        PQI_UP_RUNNING,
        PQI_BUS_RESET,
}controller_state_t;


#define PQISRC_MAX_MSIX_SUPPORTED               64

/* SIS Specific */
#define PQISRC_INIT_STRUCT_REVISION             9
#define PQISRC_SECTOR_SIZE                      512
#define PQISRC_BLK_SIZE                         PQISRC_SECTOR_SIZE
#define PQISRC_DEFAULT_DMA_ALIGN                4
#define PQISRC_DMA_ALIGN_MASK                   (PQISRC_DEFAULT_DMA_ALIGN - 1)
#define PQISRC_ERR_BUF_DMA_ALIGN                32
#define PQISRC_ERR_BUF_ELEM_SIZE                MAX(sizeof(raid_path_error_info_elem_t),sizeof(aio_path_error_info_elem_t))
#define PQISRC_INIT_STRUCT_DMA_ALIGN            16

#define SIS_CMD_GET_ADAPTER_PROPERTIES          0x19
#define SIS_CMD_GET_COMM_PREFERRED_SETTINGS     0x26
#define SIS_CMD_GET_PQI_CAPABILITIES            0x3000
#define SIS_CMD_INIT_BASE_STRUCT_ADDRESS        0x1b

#define SIS_SUPPORT_EXT_OPT                     0x00800000
#define SIS_SUPPORT_PQI                         0x00000004
#define SIS_SUPPORT_PQI_RESET_QUIESCE           0x00000008

#define SIS_PQI_RESET_QUIESCE                   0x1000000

#define SIS_STATUS_OK_TIMEOUT                   120000  /* in milli sec, 5 sec */

#define SIS_CMD_COMPLETE_TIMEOUT                30000  /* in milli sec, 30 secs */
#define SIS_POLL_START_WAIT_TIME                20000  /* in micro sec, 20 milli sec */
#define SIS_DB_BIT_CLEAR_TIMEOUT_CNT            120000  /* 500usec * 120000 = 60 sec */

#define SIS_ENABLE_TIMEOUT                      3000
#define REENABLE_SIS                            0x1
#define TRIGGER_NMI_SIS                         0x800000
/*SIS Register status defines */

#define PQI_CTRL_KERNEL_UP_AND_RUNNING          0x80
#define PQI_CTRL_KERNEL_PANIC                   0x100

#define SIS_CTL_TO_HOST_DB_DISABLE_ALL          0xFFFFFFFF
#define SIS_CTL_TO_HOST_DB_CLEAR                0x00001000                      
#define SIS_CMD_SUBMIT                          0x00000200  /* Bit 9 */
#define SIS_CMD_COMPLETE                        0x00001000  /* Bit 12 */
#define SIS_CMD_STATUS_SUCCESS                  0x1     

/* PQI specific */

/* defines */
#define PQISRC_PQI_REG_OFFSET                           0x4000
#define PQISRC_MAX_OUTSTANDING_REQ                      4096
#define PQISRC_MAX_ADMIN_IB_QUEUE_ELEM_NUM              16
#define PQISRC_MAX_ADMIN_OB_QUEUE_ELEM_NUM              16



#define PQI_MIN_OP_IB_QUEUE_ID                          1
#define PQI_OP_EVENT_QUEUE_ID                           1
#define PQI_MIN_OP_OB_QUEUE_ID                          2

#define PQISRC_MAX_SUPPORTED_OP_IB_Q            128
#define PQISRC_MAX_SUPPORTED_OP_RAID_IB_Q       (PQISRC_MAX_SUPPORTED_OP_IB_Q / 2)
#define PQISRC_MAX_SUPPORTED_OP_AIO_IB_Q        (PQISRC_MAX_SUPPORTED_OP_RAID_IB_Q)
#define PQISRC_MAX_OP_IB_QUEUE_ELEM_NUM         (PQISRC_MAX_OUTSTANDING_REQ / PQISRC_MAX_SUPPORTED_OP_IB_Q)     
#define PQISRC_MAX_OP_OB_QUEUE_ELEM_NUM         PQISRC_MAX_OUTSTANDING_REQ      
#define PQISRC_MIN_OP_OB_QUEUE_ELEM_NUM         2
#define PQISRC_MAX_SUPPORTED_OP_OB_Q            64
#define PQISRC_OP_MAX_IBQ_ELEM_SIZE             8 /* 8 * 16  = 128 bytes */     
#define PQISRC_OP_MIN_IBQ_ELEM_SIZE             2 /* 2 * 16  = 32 bytes */
#define PQISRC_OP_OBQ_ELEM_SIZE                 1 /* 16 bytes */
#define PQISRC_ADMIN_IBQ_ELEM_SIZE              2 /* 2 * 16  = 32 bytes */
#define PQISRC_INTR_COALSC_GRAN                 0
#define PQISRC_PROTO_BIT_MASK                   0
#define PQISRC_SGL_SUPPORTED_BIT_MASK           0

#define PQISRC_NUM_EVENT_Q_ELEM                 32
#define PQISRC_EVENT_Q_ELEM_SIZE                32 

/* PQI Registers state status */

#define PQI_RESET_ACTION_RESET                  0x1
#define PQI_RESET_ACTION_COMPLETED              0x2
#define PQI_RESET_TYPE_NO_RESET                 0x0
#define PQI_RESET_TYPE_SOFT_RESET               0x1
#define PQI_RESET_TYPE_FIRM_RESET               0x2
#define PQI_RESET_TYPE_HARD_RESET               0x3

#define PQI_RESET_POLL_INTERVAL                 100000 /*100 msec*/

enum pqisrc_ctrl_mode{
        CTRL_SIS_MODE = 0,
        CTRL_PQI_MODE
};

/* PQI device performing internal initialization (e.g., POST). */
#define PQI_DEV_STATE_POWER_ON_AND_RESET        0x0  
/* Upon entry to this state PQI device initialization begins. */
#define PQI_DEV_STATE_PQI_STATUS_AVAILABLE      0x1  
/* PQI device Standard registers are available to the driver. */
#define PQI_DEV_STATE_ALL_REGISTERS_READY       0x2  
/* PQI device is initialized and ready to process any PCI transactions. */
#define PQI_DEV_STATE_ADMIN_QUEUE_PAIR_READY    0x3 
/* The PQI Device Error register indicates the error. */
#define PQI_DEV_STATE_ERROR                     0x4  

#define PQI_DEV_STATE_AT_INIT                   ( PQI_DEV_STATE_PQI_STATUS_AVAILABLE | \
                                                  PQI_DEV_STATE_ALL_REGISTERS_READY | \
                                                  PQI_DEV_STATE_ADMIN_QUEUE_PAIR_READY )                

#define PQISRC_PQI_DEVICE_SIGNATURE             "PQI DREG"
#define PQI_ADMINQ_ELEM_ARRAY_ALIGN             64
#define PQI_ADMINQ_CI_PI_ALIGN                  64
#define PQI_OPQ_ELEM_ARRAY_ALIGN                64
#define PQI_OPQ_CI_PI_ALIGN                             4
#define PQI_ADDR_ALIGN_MASK_64                  0x3F /* lsb 6 bits */
#define PQI_ADDR_ALIGN_MASK_4                   0x3  /* lsb 2 bits */

#define PQISRC_PQIMODE_READY_TIMEOUT            (30 * 1000 ) /* 30 secs */
#define PQISRC_MODE_READY_POLL_INTERVAL         1000 /* 1 msec */

#define PRINT_PQI_SIGNATURE(sign)               { int i = 0; \
                                                  char si[9]; \
                                                  for(i=0;i<8;i++) \
                                                        si[i] = *((char *)&(sign)+i); \
                                                  si[i] = '\0'; \
                                                  DBG_INFO("Signature is %s",si); \
                                                }
#define PQI_CONF_TABLE_MAX_LEN          ((uint16_t)~0)
#define PQI_CONF_TABLE_SIGNATURE        "CFGTABLE"

/* PQI configuration table section IDs */
#define PQI_CONF_TABLE_SECTION_GENERAL_INFO             0
#define PQI_CONF_TABLE_SECTION_FIRMWARE_FEATURES        1
#define PQI_CONF_TABLE_SECTION_FIRMWARE_ERRATA          2
#define PQI_CONF_TABLE_SECTION_DEBUG                    3
#define PQI_CONF_TABLE_SECTION_HEARTBEAT                4

#define CTRLR_HEARTBEAT_CNT(softs)              LE_64(PCI_MEM_GET64(softs, softs->heartbeat_counter_abs_addr, softs->heartbeat_counter_off))
#define PQI_NEW_HEARTBEAT_MECHANISM(softs)      1

 /* pqi-2r00a table 36 */
#define PQI_ADMIN_QUEUE_MSIX_DISABLE            (0x80000000)   
#define PQI_ADMIN_QUEUE_MSIX_ENABLE             (0 << 31)

#define PQI_ADMIN_QUEUE_CONF_FUNC_CREATE_Q_PAIR 0x01
#define PQI_ADMIN_QUEUE_CONF_FUNC_DEL_Q_PAIR    0x02
#define PQI_ADMIN_QUEUE_CONF_FUNC_STATUS_IDLE   0x00
#define PQISRC_ADMIN_QUEUE_CREATE_TIMEOUT       1000  /* in miLLI sec, 1 sec, 100 ms is standard */
#define PQISRC_ADMIN_QUEUE_DELETE_TIMEOUT       100  /* 100 ms is standard */
#define PQISRC_ADMIN_CMD_RESP_TIMEOUT           3000 /* 3 sec  */
#define PQISRC_RAIDPATH_CMD_TIMEOUT             30000 /* 30 sec */

#define REPORT_PQI_DEV_CAP_DATA_BUF_SIZE        sizeof(pqi_dev_cap_t)
#define REPORT_MANUFACTURER_INFO_DATA_BUF_SIZE  0x80   /* Data buffer size specified in bytes 0-1 of data buffer.  128 bytes. */
/* PQI IUs */
/* Admin IU request length not including header. */
#define PQI_STANDARD_IU_LENGTH                  0x003C  /* 60 bytes. */
#define PQI_IU_TYPE_GENERAL_ADMIN_REQUEST       0x60
#define PQI_IU_TYPE_GENERAL_ADMIN_RESPONSE      0xe0

/* PQI / Vendor specific IU */
#define PQI_FUNCTION_REPORT_DEV_CAP                             0x00
#define PQI_REQUEST_IU_TASK_MANAGEMENT                          0x13
#define PQI_IU_TYPE_RAID_PATH_IO_REQUEST                        0x14
#define PQI_IU_TYPE_AIO_PATH_IO_REQUEST                         0x15
#define PQI_REQUEST_IU_GENERAL_ADMIN                            0x60
#define PQI_REQUEST_IU_REPORT_VENDOR_EVENT_CONFIG               0x72
#define PQI_REQUEST_IU_SET_VENDOR_EVENT_CONFIG                  0x73
#define PQI_RESPONSE_IU_GENERAL_MANAGEMENT                      0x81
#define PQI_RESPONSE_IU_TASK_MANAGEMENT                         0x93
#define PQI_RESPONSE_IU_GENERAL_ADMIN                           0xe0

#define PQI_RESPONSE_IU_RAID_PATH_IO_SUCCESS                    0xf0
#define PQI_RESPONSE_IU_AIO_PATH_IO_SUCCESS                     0xf1
#define PQI_RESPONSE_IU_RAID_PATH_IO_ERROR                      0xf2
#define PQI_RESPONSE_IU_AIO_PATH_IO_ERROR                       0xf3
#define PQI_RESPONSE_IU_AIO_PATH_IS_OFF                         0xf4
#define PQI_REQUEST_IU_ACKNOWLEDGE_VENDOR_EVENT                 0xf6
#define PQI_REQUEST_HEADER_LENGTH                               4
#define PQI_FUNCTION_CREATE_OPERATIONAL_IQ                      0x10
#define PQI_FUNCTION_CREATE_OPERATIONAL_OQ                      0x11
#define PQI_FUNCTION_DELETE_OPERATIONAL_IQ                      0x12
#define PQI_FUNCTION_DELETE_OPERATIONAL_OQ                      0x13
#define PQI_FUNCTION_CHANGE_OPERATIONAL_IQ_PROP                 0x14
#define PQI_CHANGE_OP_IQ_PROP_ASSIGN_AIO                        1

#define PQI_DEFAULT_IB_QUEUE                                    0
/* Interface macros */

#define GET_FW_STATUS(softs) \
        (PCI_MEM_GET32(softs, &softs->ioa_reg->scratchpad3_fw_status, LEGACY_SIS_OMR))

#define SIS_IS_KERNEL_PANIC(softs) \
        (GET_FW_STATUS(softs) & PQI_CTRL_KERNEL_PANIC)

#define SIS_IS_KERNEL_UP(softs) \
        (GET_FW_STATUS(softs) & PQI_CTRL_KERNEL_UP_AND_RUNNING)

#define PQI_GET_CTRL_MODE(softs) \
        (PCI_MEM_GET32(softs, &softs->ioa_reg->scratchpad0, LEGACY_SIS_SCR0))

#define PQI_SAVE_CTRL_MODE(softs, mode) \
        PCI_MEM_PUT32(softs, &softs->ioa_reg->scratchpad0, LEGACY_SIS_SCR0, mode)

#define PQISRC_MAX_TARGETID                     1024            
#define PQISRC_MAX_TARGETLUN                    64              

/* Vendor specific IU Type for Event config Cmds */
#define PQI_REQUEST_IU_REPORT_EVENT_CONFIG              0x72
#define PQI_REQUEST_IU_SET_EVENT_CONFIG                 0x73
#define PQI_REQUEST_IU_ACKNOWLEDGE_VENDOR_EVENT         0xf6
#define PQI_RESPONSE_IU_GENERAL_MANAGEMENT              0x81
#define PQI_MANAGEMENT_CMD_RESP_TIMEOUT                 3000 
#define PQISRC_EVENT_ACK_RESP_TIMEOUT                   1000


/* Supported Event types by controller */
#define PQI_NUM_SUPPORTED_EVENTS                7

#define PQI_EVENT_TYPE_HOTPLUG                  0x1
#define PQI_EVENT_TYPE_HARDWARE                 0x2
#define PQI_EVENT_TYPE_PHYSICAL_DEVICE          0x4
#define PQI_EVENT_TYPE_LOGICAL_DEVICE           0x5
#define PQI_EVENT_TYPE_AIO_STATE_CHANGE         0xfd
#define PQI_EVENT_TYPE_AIO_CONFIG_CHANGE        0xfe
#define PQI_EVENT_TYPE_HEARTBEAT                0xff

/* for indexing into the pending_events[] field of struct pqisrc_softstate */
#define PQI_EVENT_HEARTBEAT             0
#define PQI_EVENT_HOTPLUG               1
#define PQI_EVENT_HARDWARE              2
#define PQI_EVENT_PHYSICAL_DEVICE       3
#define PQI_EVENT_LOGICAL_DEVICE        4
#define PQI_EVENT_AIO_STATE_CHANGE      5
#define PQI_EVENT_AIO_CONFIG_CHANGE     6

#define PQI_MAX_HEARTBEAT_REQUESTS      5


/* Device flags */
#define PQISRC_DFLAG_VALID                      (1 << 0)
#define PQISRC_DFLAG_CONFIGURING                (1 << 1)

#define MAX_EMBEDDED_SG_IN_FIRST_IU             4
#define MAX_EMBEDDED_SG_IN_IU                   8
#define SG_FLAG_LAST                            0x40000000
#define SG_FLAG_CHAIN                           0x80000000

#define IN_PQI_RESET(softs)                     (softs->ctlr_state & PQI_BUS_RESET)
#define DEV_GONE(dev)                           (!dev || (dev->invalid == true))
#define IS_AIO_PATH(dev)                                (dev->aio_enabled)
#define IS_RAID_PATH(dev)                               (!dev->aio_enabled)

/* SOP data direction flags */
#define SOP_DATA_DIR_NONE                       0x00
#define SOP_DATA_DIR_FROM_DEVICE                0x01
#define SOP_DATA_DIR_TO_DEVICE                  0x02
#define SOP_DATA_DIR_BIDIRECTIONAL              0x03
#define SOP_PARTIAL_DATA_BUFFER                 0x04

#define PQISRC_DMA_VALID                        (1 << 0)
#define PQISRC_CMD_NO_INTR                      (1 << 1)

#define SOP_TASK_ATTRIBUTE_SIMPLE               0
#define SOP_TASK_ATTRIBUTE_HEAD_OF_QUEUE        1
#define SOP_TASK_ATTRIBUTE_ORDERED              2
#define SOP_TASK_ATTRIBUTE_ACA                  4

#define SOP_TASK_MANAGEMENT_FUNCTION_COMPLETE           0x0
#define SOP_TASK_MANAGEMENT_FUNCTION_REJECTED           0x4
#define SOP_TASK_MANAGEMENT_FUNCTION_FAILED             0x5
#define SOP_TASK_MANAGEMENT_FUNCTION_SUCCEEDED          0x8
#define SOP_TASK_MANAGEMENT_FUNCTION_ABORT_TASK         0x01
#define SOP_TASK_MANAGEMENT_FUNCTION_ABORT_TASK_SET     0x02
#define SOP_TASK_MANAGEMENT_LUN_RESET                   0x8


/* Additional CDB bytes  */
#define PQI_ADDITIONAL_CDB_BYTES_0              0       /* 16 byte CDB */
#define PQI_ADDITIONAL_CDB_BYTES_4              1       /* 20 byte CDB */
#define PQI_ADDITIONAL_CDB_BYTES_8              2       /* 24 byte CDB */
#define PQI_ADDITIONAL_CDB_BYTES_12             3       /* 28 byte CDB */
#define PQI_ADDITIONAL_CDB_BYTES_16             4       /* 32 byte CDB */

#define PQI_PROTOCOL_SOP                        0x0

#define PQI_AIO_STATUS_GOOD                     0x0
#define PQI_AIO_STATUS_CHECK_CONDITION          0x2
#define PQI_AIO_STATUS_CONDITION_MET            0x4
#define PQI_AIO_STATUS_DEVICE_BUSY              0x8
#define PQI_AIO_STATUS_INT_GOOD                 0x10
#define PQI_AIO_STATUS_INT_COND_MET             0x14
#define PQI_AIO_STATUS_RESERV_CONFLICT          0x18
#define PQI_AIO_STATUS_CMD_TERMINATED           0x22
#define PQI_AIO_STATUS_QUEUE_FULL               0x28
#define PQI_AIO_STATUS_TASK_ABORTED             0x40
#define PQI_AIO_STATUS_UNDERRUN                 0x51
#define PQI_AIO_STATUS_OVERRUN                  0x75
/* Status when Target Failure */
#define PQI_AIO_STATUS_IO_ERROR                 0x1
#define PQI_AIO_STATUS_IO_ABORTED               0x2
#define PQI_AIO_STATUS_IO_NO_DEVICE             0x3
#define PQI_AIO_STATUS_INVALID_DEVICE           0x4
#define PQI_AIO_STATUS_AIO_PATH_DISABLED        0xe

/* Service Response */
#define PQI_AIO_SERV_RESPONSE_COMPLETE                  0
#define PQI_AIO_SERV_RESPONSE_FAILURE                   1
#define PQI_AIO_SERV_RESPONSE_TMF_COMPLETE              2
#define PQI_AIO_SERV_RESPONSE_TMF_SUCCEEDED             3
#define PQI_AIO_SERV_RESPONSE_TMF_REJECTED              4
#define PQI_AIO_SERV_RESPONSE_TMF_INCORRECT_LUN         5

#define PQI_TMF_WAIT_DELAY                              10000000        /* 10 seconds */

#define PQI_RAID_STATUS_GOOD                            PQI_AIO_STATUS_GOOD
#define PQI_RAID_STATUS_CHECK_CONDITION                 PQI_AIO_STATUS_CHECK_CONDITION
#define PQI_RAID_STATUS_CONDITION_MET                   PQI_AIO_STATUS_CONDITION_MET
#define PQI_RAID_STATUS_DEVICE_BUSY                     PQI_AIO_STATUS_DEVICE_BUSY
#define PQI_RAID_STATUS_INT_GOOD                        PQI_AIO_STATUS_INT_GOOD 
#define PQI_RAID_STATUS_INT_COND_MET                    PQI_AIO_STATUS_INT_COND_MET
#define PQI_RAID_STATUS_RESERV_CONFLICT                 PQI_AIO_STATUS_RESERV_CONFLICT
#define PQI_RAID_STATUS_CMD_TERMINATED                  PQI_AIO_STATUS_CMD_TERMINATED
#define PQI_RAID_STATUS_QUEUE_FULL                      PQI_AIO_STATUS_QUEUE_FULL
#define PQI_RAID_STATUS_TASK_ABORTED                    PQI_AIO_STATUS_TASK_ABORTED
#define PQI_RAID_STATUS_UNDERRUN                        PQI_AIO_STATUS_UNDERRUN 
#define PQI_RAID_STATUS_OVERRUN                         PQI_AIO_STATUS_OVERRUN

/* VPD inquiry pages */
#define SCSI_VPD_SUPPORTED_PAGES        0x0     /* standard page */
#define SCSI_VPD_DEVICE_ID              0x83    /* standard page */
#define SA_VPD_PHYS_DEVICE_ID           0xc0    /* vendor-specific page */
#define SA_VPD_LV_DEVICE_GEOMETRY       0xc1    /* vendor-specific page */
#define SA_VPD_LV_IOACCEL_STATUS        0xc2    /* vendor-specific page */
#define SA_VPD_LV_STATUS                0xc3    /* vendor-specific page */

#define VPD_PAGE                        (1 << 8)


/* logical volume states */
#define SA_LV_OK                                        0x0
#define SA_LV_NOT_AVAILABLE                             0xb
#define SA_LV_UNDERGOING_ERASE                          0xf
#define SA_LV_UNDERGOING_RPI                            0x12
#define SA_LV_PENDING_RPI                               0x13
#define SA_LV_ENCRYPTED_NO_KEY                          0x14
#define SA_LV_PLAINTEXT_IN_ENCRYPT_ONLY_CONTROLLER      0x15
#define SA_LV_UNDERGOING_ENCRYPTION                     0x16
#define SA_LV_UNDERGOING_ENCRYPTION_REKEYING            0x17
#define SA_LV_ENCRYPTED_IN_NON_ENCRYPTED_CONTROLLER     0x18
#define SA_LV_PENDING_ENCRYPTION                        0x19
#define SA_LV_PENDING_ENCRYPTION_REKEYING               0x1a
#define SA_LV_STATUS_VPD_UNSUPPORTED                    0xff

/*
 * assume worst case: SATA queue depth of 31 minus 4 internal firmware commands
 */
#define PQI_PHYSICAL_DISK_DEFAULT_MAX_QUEUE_DEPTH       27

/* 0 = no limit */
#define PQI_LOGICAL_DISK_DEFAULT_MAX_QUEUE_DEPTH        0



#define RAID_CTLR_LUNID         "\0\0\0\0\0\0\0\0"

#define SA_CACHE_FLUSH          0x1
#define SA_INQUIRY              0x12
#define SA_REPORT_LOG           0xc2    /* Report Logical LUNs */
#define SA_REPORT_PHYS          0xc3    /* Report Physical LUNs */
#define SA_CISS_READ            0xc0
#define SA_GET_RAID_MAP         0xc8

#define SA_REPORT_LOG_EXTENDED          0x1
#define SA_REPORT_PHYS_EXTENDED         0x2

#define SA_CACHE_FLUSH_BUF_LEN          4

#define REPORT_LUN_DEV_FLAG_AIO_ENABLED                 0x8
#define PQI_MAX_TRANSFER_SIZE                           (4 * 1024U * 1024U)
#define RAID_MAP_MAX_ENTRIES                            1024
#define RAID_MAP_ENCRYPTION_ENABLED                     0x1
#define PQI_PHYSICAL_DISK_DEFAULT_MAX_QUEUE_DEPTH       27

#define ASC_LUN_NOT_READY                               0x4
#define ASCQ_LUN_NOT_READY_FORMAT_IN_PROGRESS           0x4
#define ASCQ_LUN_NOT_READY_INITIALIZING_CMD_REQ         0x2


#define OBDR_SIG_OFFSET         43
#define OBDR_TAPE_SIG           "$DR-10"
#define OBDR_SIG_LEN            (sizeof(OBDR_TAPE_SIG) - 1)
#define OBDR_TAPE_INQ_SIZE      (OBDR_SIG_OFFSET + OBDR_SIG_LEN)


#define IOACCEL_STATUS_BYTE     4
#define OFFLOAD_CONFIGURED_BIT  0x1
#define OFFLOAD_ENABLED_BIT     0x2

#define PQI_RAID_DATA_IN_OUT_GOOD               0x0
#define PQI_RAID_DATA_IN_OUT_UNDERFLOW          0x1
#define PQI_RAID_DATA_IN_OUT_UNSOLICITED_ABORT  0xf3
#define PQI_RAID_DATA_IN_OUT_ABORTED            0xf4

#define PQI_PHYSICAL_DEVICE_BUS         0
#define PQI_RAID_VOLUME_BUS             1
#define PQI_HBA_BUS                     2
#define PQI_EXTERNAL_RAID_VOLUME_BUS    3
#define PQI_MAX_BUS                     PQI_EXTERNAL_RAID_VOLUME_BUS

#define TEST_UNIT_READY         0x00
#define SCSI_VPD_HEADER_LENGTH  64


#define PQI_MAX_MULTILUN        256
#define PQI_MAX_LOGICALS        64
#define PQI_MAX_PHYSICALS       1024
#define PQI_MAX_DEVICES         (PQI_MAX_LOGICALS + PQI_MAX_PHYSICALS + 1) /* 1 for controller device entry */
#define PQI_MAX_EXT_TARGETS     32

#define PQI_CTLR_INDEX          (PQI_MAX_DEVICES - 1)
#define PQI_PD_INDEX(t)         (t + PQI_MAX_LOGICALS)

#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
#define MAX_TARGET_DEVICES 1024

#define PQI_NO_MEM      2

typedef enum pqisrc_device_status {
        DEVICE_NOT_FOUND,
        DEVICE_CHANGED,
        DEVICE_UNCHANGED,
} device_status_t;

#define SA_RAID_0                       0
#define SA_RAID_4                       1
#define SA_RAID_1                       2       /* also used for RAID 10 */
#define SA_RAID_5                       3       /* also used for RAID 50 */
#define SA_RAID_51                      4
#define SA_RAID_6                       5       /* also used for RAID 60 */
#define SA_RAID_ADM                     6       /* also used for RAID 1+0 ADM */
#define SA_RAID_MAX                     SA_RAID_ADM
#define SA_RAID_UNKNOWN                 0xff

/* BMIC commands */
#define BMIC_IDENTIFY_CONTROLLER                0x11
#define BMIC_IDENTIFY_PHYSICAL_DEVICE           0x15
#define BMIC_READ                               0x26
#define BMIC_WRITE                              0x27
#define BMIC_SENSE_CONTROLLER_PARAMETERS        0x64
#define BMIC_SENSE_SUBSYSTEM_INFORMATION        0x66
#define BMIC_CACHE_FLUSH                        0xc2
#define BMIC_FLASH_FIRMWARE                     0xf7
#define BMIC_WRITE_HOST_WELLNESS                0xa5


#define MASKED_DEVICE(lunid)                    ((lunid)[3] & 0xC0)
#define BMIC_GET_LEVEL_2_BUS(lunid)             ((lunid)[7] & 0x3F)
#define BMIC_GET_LEVEL_TWO_TARGET(lunid)        ((lunid)[6])
#define BMIC_GET_DRIVE_NUMBER(lunid)            \
        (((BMIC_GET_LEVEL_2_BUS((lunid)) - 1) << 8) +   \
        BMIC_GET_LEVEL_TWO_TARGET((lunid)))
#define NON_DISK_PHYS_DEV(rle)                  \
        (((reportlun_ext_entry_t *)(rle))->device_flags & 0x1)

#define NO_TIMEOUT              ((unsigned long) -1)

#define BMIC_DEVICE_TYPE_SATA   0x1

/* No of IO slots required for internal requests */
#define PQI_RESERVED_IO_SLOTS_SYNC_REQUESTS     3
#define PQI_RESERVED_IO_SLOTS_TMF               1
#define PQI_RESERVED_IO_SLOTS_CNT               (PQI_NUM_SUPPORTED_EVENTS + \
                                                PQI_RESERVED_IO_SLOTS_TMF + \
                                                PQI_RESERVED_IO_SLOTS_SYNC_REQUESTS)

static inline uint16_t GET_LE16(const uint8_t *p)
{
        return p[0] | p[1] << 8;
}

static inline uint32_t GET_LE32(const uint8_t *p)
{
        return p[0] | p[1] << 8 | p[2] << 16 | p[3] << 24;
}

static inline uint64_t GET_LE64(const uint8_t *p)
{
        return (((uint64_t)GET_LE32(p + 4) << 32) |
                GET_LE32(p));
}

static inline uint16_t GET_BE16(const uint8_t *p)
{
        return p[0] << 8 | p[1];
}

static inline uint32_t GET_BE32(const uint8_t *p)
{
        return p[0] << 24 | p[1] << 16 | p[2] << 8 | p[3];
}

static inline uint64_t GET_BE64(const uint8_t *p)
{
        return (((uint64_t)GET_BE32(p) << 32) |
               GET_BE32(p + 4));
}

static inline void PUT_BE16(uint16_t val, uint8_t *p)
{
        *p++ = val >> 8;
        *p++ = val;
}

static inline void PUT_BE32(uint32_t val, uint8_t *p)
{
        PUT_BE16(val >> 16, p);
        PUT_BE16(val, p + 2);
}

static inline void PUT_BE64(uint64_t val, uint8_t *p)
{
        PUT_BE32(val >> 32, p);
        PUT_BE32(val, p + 4);
}


#define OS_FREEBSD
#define SIS_POLL_WAIT

#define OS_ATTRIBUTE_PACKED         __attribute__((__packed__))
#define OS_ATTRIBUTE_ALIGNED(n)     __attribute__((aligned(n)))


/* Management Interface */
#define CCISS_IOC_MAGIC         'C'
#define SMARTPQI_IOCTL_BASE     'M'
#define CCISS_GETDRIVVER       _IOWR(SMARTPQI_IOCTL_BASE, 0, driver_info)
#define CCISS_GETPCIINFO       _IOWR(SMARTPQI_IOCTL_BASE, 1, pqi_pci_info_t)
#define SMARTPQI_PASS_THRU     _IOWR(SMARTPQI_IOCTL_BASE, 2, IOCTL_Command_struct)
#define CCISS_PASSTHRU         _IOWR('C', 210, IOCTL_Command_struct)
#define CCISS_REGNEWD          _IO(CCISS_IOC_MAGIC, 14)

/*IOCTL  pci_info structure */
typedef struct pqi_pci_info
{
       unsigned char   bus;
       unsigned char   dev_fn;
       unsigned short  domain;
       uint32_t        board_id;
       uint32_t        chip_id;
}pqi_pci_info_t;

typedef struct _driver_info
{
        unsigned char   major_version;
        unsigned char   minor_version;
        unsigned char   release_version;
        unsigned long   build_revision;
        unsigned long   max_targets;
        unsigned long   max_io;
        unsigned long   max_transfer_length;
}driver_info, *pdriver_info;

typedef uint8_t *passthru_buf_type_t;


#define PQISRC_DRIVER_MAJOR             1
#define PQISRC_DRIVER_MINOR             0
#define PQISRC_DRIVER_RELEASE           3
#define PQISRC_DRIVER_REVISION          239

#define STR(s)                          # s
#define PQISRC_VERSION(a, b, c, d)      STR(a.b.c-d)
#define PQISRC_DRIVER_VERSION           PQISRC_VERSION(PQISRC_DRIVER_MAJOR, \
                                        PQISRC_DRIVER_MINOR, \
                                        PQISRC_DRIVER_RELEASE, \
                                        PQISRC_DRIVER_REVISION)
        
/* End Management interface */

#ifdef ASSERT
#undef ASSERT
#endif

#define ASSERT(cond) {\
                if (!(cond)) { \
                        printf("Assertion failed at file %s line %d\n",__FILE__,__LINE__);      \
                }       \
                }


#define PQI_MAX_MSIX            64      /* vectors */
#define PQI_MSI_CTX_SIZE        sizeof(pqi_intr_ctx)+1
#define IS_POLLING_REQUIRED(softs)      if (cold) {\
                                        pqisrc_process_event_intr_src(softs, 0);\
                                        pqisrc_process_response_queue(softs, 1);\
                                }

#define OS_GET_TASK_ATTR(rcb)           os_get_task_attr(rcb)
#define OS_FW_HEARTBEAT_TIMER_INTERVAL (5)

typedef struct PCI_ACC_HANDLE {
        bus_space_tag_t         pqi_btag;
        bus_space_handle_t      pqi_bhandle;
} PCI_ACC_HANDLE_T;

/*
 * Legacy SIS Register definitions for the Adaptec PMC SRC/SRCv/smartraid adapters.
 */
/* accessible via BAR0 */
#define LEGACY_SIS_IOAR         0x18    /* IOA->host interrupt register */
#define LEGACY_SIS_IDBR         0x20    /* inbound doorbell register */
#define LEGACY_SIS_IISR         0x24    /* inbound interrupt status register */
#define LEGACY_SIS_OIMR         0x34    /* outbound interrupt mask register */
#define LEGACY_SIS_ODBR_R       0x9c    /* outbound doorbell register read */
#define LEGACY_SIS_ODBR_C       0xa0    /* outbound doorbell register clear */

#define LEGACY_SIS_SCR0         0xb0    /* scratchpad 0 */
#define LEGACY_SIS_OMR          0xbc    /* outbound message register */
#define LEGACY_SIS_IQUE64_L     0xc0    /* inbound queue address 64-bit (low) */
#define LEGACY_SIS_IQUE64_H     0xc4    /* inbound queue address 64-bit (high)*/
#define LEGACY_SIS_ODBR_MSI     0xc8    /* MSI register for sync./AIF */
#define LEGACY_SIS_IQN_L        0xd0    /* inbound queue native mode (low) */
#define LEGACY_SIS_IQN_H        0xd4    /* inbound queue native mode (high)*/
#define LEGACY_SIS_MAILBOX      0x7fc60 /* mailbox (20 bytes) */
#define LEGACY_SIS_SRCV_MAILBOX 0x1000  /* mailbox (20 bytes) */

#define LEGACY_SIS_ODR_SHIFT    12      /* outbound doorbell shift */
#define LEGACY_SIS_IDR_SHIFT    9       /* inbound doorbell shift */


/*
 * PQI Register definitions for the smartraid adapters
 */
/* accessible via BAR0 */
#define PQI_SIGNATURE                  0x4000
#define PQI_ADMINQ_CONFIG              0x4008
#define PQI_ADMINQ_CAP                 0x4010
#define PQI_LEGACY_INTR_STATUS         0x4018  
#define PQI_LEGACY_INTR_MASK_SET       0x401C
#define PQI_LEGACY_INTR_MASK_CLR       0x4020
#define PQI_DEV_STATUS                 0x4040
#define PQI_ADMIN_IBQ_PI_OFFSET        0x4048
#define PQI_ADMIN_OBQ_CI_OFFSET        0x4050
#define PQI_ADMIN_IBQ_ELEM_ARRAY_ADDR  0x4058
#define PQI_ADMIN_OBQ_ELEM_ARRAY_ADDR  0x4060
#define PQI_ADMIN_IBQ_CI_ADDR          0x4068
#define PQI_ADMIN_OBQ_PI_ADDR          0x4070
#define PQI_ADMINQ_PARAM               0x4078
#define PQI_DEV_ERR                    0x4080
#define PQI_DEV_ERR_DETAILS            0x4088
#define PQI_DEV_RESET                  0x4090
#define PQI_POWER_ACTION               0x4094

/* Busy wait micro seconds */
#define OS_BUSYWAIT(x) DELAY(x)
#define OS_SLEEP(timeout)       \
        DELAY(timeout);
        
#define OS_HOST_WELLNESS_TIMEOUT        (24 * 3600)


#define LE_16(x) htole16(x)
#define LE_32(x) htole32(x)
#define LE_64(x) htole64(x)
#define BE_16(x) htobe16(x)
#define BE_32(x) htobe32(x)
#define BE_64(x) htobe64(x)

#define PQI_HWIF_SRCV           0
#define PQI_HWIF_UNKNOWN        -1


#define SMART_STATE_SUSPEND             (1<<0)
#define SMART_STATE_UNUSED0             (1<<1)
#define SMART_STATE_INTERRUPTS_ON       (1<<2)
#define SMART_STATE_AIF_SLEEPER         (1<<3)
#define SMART_STATE_RESET               (1<<4)

#define PQI_FLAG_BUSY                   (1<<0)
#define PQI_MSI_ENABLED                 (1<<1)
#define PQI_SIM_REGISTERED              (1<<2)
#define PQI_MTX_INIT                    (1<<3)


#define PQI_CMD_MAPPED                  (1<<2)

/* Interrupt context to get oq_id */
typedef struct pqi_intr_ctx {
        int      oq_id;
        device_t pqi_dev;
}pqi_intr_ctx_t;

typedef uint8_t os_dev_info_t;

typedef struct OS_SPECIFIC {
        device_t                pqi_dev;        
        struct resource         *pqi_regs_res0; /* reg. if. window */
        int                     pqi_regs_rid0;          /* resource ID */
        bus_dma_tag_t           pqi_parent_dmat;        /* parent DMA tag */
        bus_dma_tag_t           pqi_buffer_dmat;

        /* controller hardware interface */
        int                     pqi_hwif;       
        struct resource         *pqi_irq[PQI_MAX_MSIX];  /* interrupt */
        int                     pqi_irq_rid[PQI_MAX_MSIX];
        void                    *intrcookie[PQI_MAX_MSIX];
        bool                    intr_registered[PQI_MAX_MSIX];
        bool                    msi_enabled;            /* MSI/MSI-X enabled */
        pqi_intr_ctx_t          *msi_ctx;
        int                     oq_id;
        int                     pqi_state;
        uint32_t                pqi_flags;
        struct mtx              cam_lock;
        struct mtx              map_lock;
        int                     mtx_init;
        int                     sim_registered;
        struct cam_devq         *devq;
        struct cam_sim          *sim;
        struct cam_path         *path;
        struct task             event_task;
        struct cdev             *cdev;
        struct callout_handle   wellness_periodic;      /* periodic event handling */
        struct callout_handle   heartbeat_timeout_id;   /* heart beat event handling */
        eventhandler_tag        eh;
} OS_SPECIFIC_T;

typedef bus_addr_t dma_addr_t; 

/* Atomic */
typedef volatile uint64_t OS_ATOMIC64_T;
#define OS_ATOMIC64_SET(_softs, target, val)    atomic_set_long(&(_softs)->target, val)
#define OS_ATOMIC64_READ(_softs, target)        atomic_load_acq_64(&(_softs)->target)
#define OS_ATOMIC64_INC(_softs, target)         atomic_add_64(&(_softs)->target, 1)

/* Register access macros */
#define PCI_MEM_GET32( _softs, _absaddr, _offset ) \
    bus_space_read_4(_softs->pci_mem_handle.pqi_btag, \
        _softs->pci_mem_handle.pqi_bhandle, _offset)

#define PCI_MEM_GET64( _softs, _absaddr, _offset ) \
    bus_space_read_8(_softs->pci_mem_handle.pqi_btag, \
        _softs->pci_mem_handle.pqi_bhandle, _offset)

#define PCI_MEM_PUT32( _softs, _absaddr, _offset, _val ) \
    bus_space_write_4(_softs->pci_mem_handle.pqi_btag, \
        _softs->pci_mem_handle.pqi_bhandle, _offset, _val)

#define PCI_MEM_PUT64( _softs, _absaddr, _offset, _val ) \
    bus_space_write_8(_softs->pci_mem_handle.pqi_btag, \
        _softs->pci_mem_handle.pqi_bhandle, _offset, _val)

#define PCI_MEM_GET_BUF(_softs, _absaddr, _offset, buf, size) \
        bus_space_read_region_1(_softs->pci_mem_handle.pqi_btag,\
        _softs->pci_mem_handle.pqi_bhandle, _offset, buf, size)
    
/* Lock */
typedef struct mtx OS_LOCK_T;
typedef struct sema OS_SEMA_LOCK_T;

#define OS_PQILOCK_T OS_LOCK_T

#define OS_ACQUIRE_SPINLOCK(_lock) mtx_lock_spin(_lock)
#define OS_RELEASE_SPINLOCK(_lock) mtx_unlock_spin(_lock)

#define OS_INIT_PQILOCK(_softs,_lock,_lockname) os_init_spinlock(_softs,_lock,_lockname)
#define OS_UNINIT_PQILOCK(_lock) os_uninit_spinlock(_lock)

#define PQI_LOCK(_lock) OS_ACQUIRE_SPINLOCK(_lock)
#define PQI_UNLOCK(_lock) OS_RELEASE_SPINLOCK(_lock)

#define OS_GET_CDBP(rcb)        ((rcb->cm_ccb->ccb_h.flags & CAM_CDB_POINTER) ? rcb->cm_ccb->csio.cdb_io.cdb_ptr : rcb->cm_ccb->csio.cdb_io.cdb_bytes)
#define GET_SCSI_BUFFLEN(rcb)   (rcb->cm_ccb->csio.dxfer_len)

#define OS_GET_IO_QINDEX(softs,rcb)     curcpu % softs->num_op_obq
#define OS_GET_IO_RESP_QID(softs,rcb)   (softs->op_ob_q[(OS_GET_IO_QINDEX(softs,rcb))].q_id)
#define OS_GET_IO_REQ_QINDEX(softs,rcb) OS_GET_IO_QINDEX(softs,rcb)
#define OS_GET_TMF_RESP_QID             OS_GET_IO_RESP_QID
#define OS_GET_TMF_REQ_QINDEX           OS_GET_IO_REQ_QINDEX

/* check request type */
#define is_internal_req(rcb)    (!(rcb)->cm_ccb)

/* sg elements addr, len, flags */
#define OS_GET_IO_SG_COUNT(rcb)         rcb->nseg
#define OS_GET_IO_SG_ADDR(rcb,i)        rcb->sgt[i].addr
#define OS_GET_IO_SG_LEN(rcb,i)         rcb->sgt[i].len

/* scsi commands used in pqilib for RAID bypass*/
#define SCMD_READ_6     READ_6
#define SCMD_WRITE_6    WRITE_6
#define SCMD_READ_10    READ_10
#define SCMD_WRITE_10   WRITE_10
#define SCMD_READ_12    READ_12
#define SCMD_WRITE_12   WRITE_12
#define SCMD_READ_16    READ_16
#define SCMD_WRITE_16   WRITE_16

/* Debug facility */

#define PQISRC_LOG_LEVEL  0x60

static int logging_level  = PQISRC_LOG_LEVEL;

#define PQISRC_FLAGS_MASK               0x0000ffff
#define PQISRC_FLAGS_INIT               0x00000001
#define PQISRC_FLAGS_INFO               0x00000002
#define PQISRC_FLAGS_FUNC               0x00000004
#define PQISRC_FLAGS_TRACEIO            0x00000008
#define PQISRC_FLAGS_DISC               0x00000010
#define PQISRC_FLAGS_WARN               0x00000020
#define PQISRC_FLAGS_ERROR              0x00000040


#define DBG_INIT(fmt,args...)                                           \
                do {                                                    \
                        if (logging_level & PQISRC_FLAGS_INIT) {        \
                                printf("[INIT]:[ %s ] [ %d ]"fmt,__func__,__LINE__,##args);                     \
                        }                                               \
                }while(0);

#define DBG_INFO(fmt,args...)                                           \
                do {                                                    \
                        if (logging_level & PQISRC_FLAGS_INFO) {        \
                                printf("[INFO]:[ %s ] [ %d ]"fmt,__func__,__LINE__,##args);                     \
                        }                                               \
                }while(0);

#define DBG_FUNC(fmt,args...)                                           \
                do {                                                    \
                        if (logging_level & PQISRC_FLAGS_FUNC) {        \
                                printf("[FUNC]:[ %s ] [ %d ]"fmt,__func__,__LINE__,##args);                     \
                        }                                               \
                }while(0);

#define DBG_TRACEIO(fmt,args...)                                        \
                do {                                                    \
                        if (logging_level & PQISRC_FLAGS_TRACEIO) {     \
                                printf("[TRACEIO]:[ %s ] [ %d ]"fmt,__func__,__LINE__,##args);                  \
                        }                                               \
                }while(0);

#define DBG_DISC(fmt,args...)                                           \
                do {                                                    \
                        if (logging_level & PQISRC_FLAGS_DISC) {        \
                                printf("[DISC]:[ %s ] [ %d ]"fmt,__func__,__LINE__,##args);                     \
                        }                                               \
                }while(0);

#define DBG_WARN(fmt,args...)                                           \
                do {                                                    \
                        if (logging_level & PQISRC_FLAGS_WARN) {        \
                                printf("[WARN]:[%u:%u.%u][CPU %d][%s][%d]:"fmt,softs->bus_id,softs->device_id,softs->func_id,curcpu,__func__,__LINE__,##args);\
                        }                                               \
                }while(0);

#define DBG_ERR(fmt,args...)                                            \
                do {                                                    \
                        if (logging_level & PQISRC_FLAGS_ERROR) {       \
                                printf("[ERROR]::[%u:%u.%u][CPU %d][%s][%d]:"fmt,softs->bus_id,softs->device_id,softs->func_id,curcpu,__func__,__LINE__,##args); \
                        }                                               \
                }while(0);
#define DBG_IO(fmt,args...)                                             \
                do {                                                    \
                        if (logging_level & PQISRC_FLAGS_TRACEIO) {     \
                                printf("[IO]:[ %s ] [ %d ]"fmt,__func__,__LINE__,##args);                       \
                        }                                               \
                }while(0);

#define DBG_ERR_BTL(device,fmt,args...)                                         \
                do {                                                    \
                        if (logging_level & PQISRC_FLAGS_ERROR) {       \
                                printf("[ERROR]::[%u:%u.%u][%u,%u,%u][CPU %d][%s][%d]:"fmt, softs->bus_id, softs->device_id, softs->func_id, device->bus, device->target, device->lun,curcpu,__func__,__LINE__,##args); \
                        }                                               \
                }while(0);

#define DBG_WARN_BTL(device,fmt,args...)                                                \
                do {                                                    \
                        if (logging_level & PQISRC_FLAGS_WARN) {        \
                                printf("[WARN]:[%u:%u.%u][%u,%u,%u][CPU %d][%s][%d]:"fmt, softs->bus_id, softs->device_id, softs->func_id, device->bus, device->target, device->lun,curcpu,__func__,__LINE__,##args);\
                        }                                               \
                }while(0);

#endif // _PQI_DEFINES_H