2 * Copyright (c) 2010 Hans Petter Selasky. All rights reserved.
4 * Redistribution and use in source and binary forms, with or without
5 * modification, are permitted provided that the following conditions
7 * 1. Redistributions of source code must retain the above copyright
8 * notice, this list of conditions and the following disclaimer.
9 * 2. Redistributions in binary form must reproduce the above copyright
10 * notice, this list of conditions and the following disclaimer in the
11 * documentation and/or other materials provided with the distribution.
13 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
14 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
15 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
16 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
17 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
18 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
19 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
20 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
21 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
22 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26 #include <sys/cdefs.h>
27 __FBSDID("$FreeBSD$");
29 #include <sys/stdint.h>
30 #include <sys/stddef.h>
31 #include <sys/param.h>
32 #include <sys/queue.h>
33 #include <sys/types.h>
34 #include <sys/systm.h>
35 #include <sys/kernel.h>
37 #include <sys/module.h>
39 #include <sys/mutex.h>
40 #include <sys/condvar.h>
41 #include <sys/sysctl.h>
43 #include <sys/unistd.h>
44 #include <sys/callout.h>
45 #include <sys/malloc.h>
48 #include <dev/usb/usb.h>
49 #include <dev/usb/usbdi.h>
51 #include <dev/usb/usb_core.h>
52 #include <dev/usb/usb_busdma.h>
53 #include <dev/usb/usb_process.h>
54 #include <dev/usb/usb_util.h>
56 #include <dev/usb/usb_controller.h>
57 #include <dev/usb/usb_bus.h>
58 #include <dev/usb/usb_pci.h>
59 #include <dev/usb/controller/xhci.h>
60 #include <dev/usb/controller/xhcireg.h>
63 static device_probe_t xhci_pci_probe;
64 static device_attach_t xhci_pci_attach;
65 static device_detach_t xhci_pci_detach;
66 static usb_take_controller_t xhci_pci_take_controller;
68 static device_method_t xhci_device_methods[] = {
69 /* device interface */
70 DEVMETHOD(device_probe, xhci_pci_probe),
71 DEVMETHOD(device_attach, xhci_pci_attach),
72 DEVMETHOD(device_detach, xhci_pci_detach),
73 DEVMETHOD(device_suspend, bus_generic_suspend),
74 DEVMETHOD(device_resume, bus_generic_resume),
75 DEVMETHOD(device_shutdown, bus_generic_shutdown),
76 DEVMETHOD(usb_take_controller, xhci_pci_take_controller),
81 static driver_t xhci_driver = {
83 .methods = xhci_device_methods,
84 .size = sizeof(struct xhci_softc),
87 static devclass_t xhci_devclass;
89 DRIVER_MODULE(xhci, pci, xhci_driver, xhci_devclass, NULL, NULL);
90 MODULE_DEPEND(xhci, usb, 1, 1, 1);
93 xhci_pci_match(device_t self)
95 uint32_t device_id = pci_get_devid(self);
99 return ("AMD FCH USB 3.0 controller");
102 return ("NEC uPD720200 USB 3.0 controller");
104 return ("NEC uPD720202 USB 3.0 controller");
107 return ("Fresco Logic FL1000G USB 3.0 controller");
110 return ("ASMedia ASM1042 USB 3.0 controller");
112 return ("ASMedia ASM1042A USB 3.0 controller");
115 return ("Intel BayTrail USB 3.0 controller");
117 return ("Intel Denverton USB 3.0 controller");
120 return ("Intel Panther Point USB 3.0 controller");
122 return ("Intel Braswell USB 3.0 controller");
124 return ("Intel Apollo Lake USB 3.0 controller");
126 return ("Intel Lynx Point USB 3.0 controller");
128 return ("Intel Wildcat Point USB 3.0 controller");
130 return ("Intel Wellsburg USB 3.0 controller");
132 return ("Broadwell Integrated PCH-LP chipset USB 3.0 controller");
134 return ("Intel Sunrise Point-LP USB 3.0 controller");
136 return ("Intel Sunrise Point USB 3.0 controller");
138 return ("Intel Lewisburg USB 3.0 controller");
140 return ("Intel Union Point USB 3.0 controller");
143 return ("Cavium ThunderX USB 3.0 controller");
149 if ((pci_get_class(self) == PCIC_SERIALBUS)
150 && (pci_get_subclass(self) == PCIS_SERIALBUS_USB)
151 && (pci_get_progif(self) == PCIP_SERIALBUS_USB_XHCI)) {
152 return ("XHCI (generic) USB 3.0 controller");
154 return (NULL); /* dunno */
158 xhci_pci_probe(device_t self)
160 const char *desc = xhci_pci_match(self);
163 device_set_desc(self, desc);
164 return (BUS_PROBE_DEFAULT);
170 static int xhci_use_msi = 1;
171 TUNABLE_INT("hw.usb.xhci.msi", &xhci_use_msi);
172 static int xhci_use_msix = 1;
173 TUNABLE_INT("hw.usb.xhci.msix", &xhci_use_msix);
176 xhci_interrupt_poll(void *_sc)
178 struct xhci_softc *sc = _sc;
179 USB_BUS_UNLOCK(&sc->sc_bus);
181 USB_BUS_LOCK(&sc->sc_bus);
182 usb_callout_reset(&sc->sc_callout, 1, (void *)&xhci_interrupt_poll, sc);
186 xhci_pci_port_route(device_t self, uint32_t set, uint32_t clear)
192 temp = pci_read_config(self, PCI_XHCI_INTEL_USB3_PSSEN, 4) |
193 pci_read_config(self, PCI_XHCI_INTEL_XUSB2PR, 4);
198 /* Don't set bits which the hardware doesn't support */
199 usb3_mask = pci_read_config(self, PCI_XHCI_INTEL_USB3PRM, 4);
200 usb2_mask = pci_read_config(self, PCI_XHCI_INTEL_USB2PRM, 4);
202 pci_write_config(self, PCI_XHCI_INTEL_USB3_PSSEN, temp & usb3_mask, 4);
203 pci_write_config(self, PCI_XHCI_INTEL_XUSB2PR, temp & usb2_mask, 4);
205 device_printf(self, "Port routing mask set to 0x%08x\n", temp);
211 xhci_pci_attach(device_t self)
213 struct xhci_softc *sc = device_get_softc(self);
214 int count, err, msix_table, rid;
216 uint8_t usedma32 = 0;
218 rid = PCI_XHCI_CBMEM;
219 sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid,
221 if (!sc->sc_io_res) {
222 device_printf(self, "Could not map memory\n");
225 sc->sc_io_tag = rman_get_bustag(sc->sc_io_res);
226 sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res);
227 sc->sc_io_size = rman_get_size(sc->sc_io_res);
229 switch (pci_get_devid(self)) {
230 case 0x01941033: /* NEC uPD720200 USB 3.0 controller */
231 case 0x00141912: /* NEC uPD720201 USB 3.0 controller */
232 /* Don't use 64-bit DMA on these controllers. */
235 case 0x10001b73: /* FL1000G */
236 /* Fresco Logic host doesn't support MSI. */
239 case 0x0f358086: /* BayTrail */
240 case 0x9c318086: /* Panther Point */
241 case 0x1e318086: /* Panther Point */
242 case 0x8c318086: /* Lynx Point */
243 case 0x8cb18086: /* Wildcat Point */
244 case 0x9cb18086: /* Broadwell Mobile Integrated */
246 * On Intel chipsets, reroute ports from EHCI to XHCI
247 * controller and use a different IMOD value.
249 sc->sc_port_route = &xhci_pci_port_route;
250 sc->sc_imod_default = XHCI_IMOD_DEFAULT_LP;
254 if (xhci_init(sc, self, usedma32)) {
255 device_printf(self, "Could not initialize softc\n");
256 bus_release_resource(self, SYS_RES_MEMORY, PCI_XHCI_CBMEM,
261 pci_enable_busmaster(self);
263 usb_callout_init_mtx(&sc->sc_callout, &sc->sc_bus.bus_mtx, 0);
266 if (xhci_use_msix && (msix_table = pci_msix_table_bar(self)) >= 0) {
267 sc->sc_msix_res = bus_alloc_resource_any(self, SYS_RES_MEMORY,
268 &msix_table, RF_ACTIVE);
269 if (sc->sc_msix_res == NULL) {
270 /* May not be enabled */
272 "Unable to map MSI-X table \n");
275 if (pci_alloc_msix(self, &count) == 0) {
277 device_printf(self, "MSI-X enabled\n");
280 bus_release_resource(self, SYS_RES_MEMORY,
281 msix_table, sc->sc_msix_res);
282 sc->sc_msix_res = NULL;
286 if (rid == 0 && xhci_use_msi && usemsi) {
288 if (pci_alloc_msi(self, &count) == 0) {
290 device_printf(self, "MSI enabled\n");
294 sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid,
295 RF_ACTIVE | (rid != 0 ? 0 : RF_SHAREABLE));
296 if (sc->sc_irq_res == NULL) {
297 pci_release_msi(self);
298 device_printf(self, "Could not allocate IRQ\n");
299 /* goto error; FALLTHROUGH - use polling */
301 sc->sc_bus.bdev = device_add_child(self, "usbus", -1);
302 if (sc->sc_bus.bdev == NULL) {
303 device_printf(self, "Could not add USB device\n");
306 device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus);
308 sprintf(sc->sc_vendor, "0x%04x", pci_get_vendor(self));
310 if (sc->sc_irq_res != NULL) {
311 err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
312 NULL, (driver_intr_t *)xhci_interrupt, sc, &sc->sc_intr_hdl);
314 bus_release_resource(self, SYS_RES_IRQ,
315 rman_get_rid(sc->sc_irq_res), sc->sc_irq_res);
316 sc->sc_irq_res = NULL;
317 pci_release_msi(self);
318 device_printf(self, "Could not setup IRQ, err=%d\n", err);
319 sc->sc_intr_hdl = NULL;
322 if (sc->sc_irq_res == NULL || sc->sc_intr_hdl == NULL) {
323 if (xhci_use_polling() != 0) {
324 device_printf(self, "Interrupt polling at %dHz\n", hz);
325 USB_BUS_LOCK(&sc->sc_bus);
326 xhci_interrupt_poll(sc);
327 USB_BUS_UNLOCK(&sc->sc_bus);
332 xhci_pci_take_controller(self);
334 err = xhci_halt_controller(sc);
337 err = xhci_start_controller(sc);
340 err = device_probe_and_attach(sc->sc_bus.bdev);
343 device_printf(self, "XHCI halt/start/probe failed err=%d\n", err);
349 xhci_pci_detach(self);
354 xhci_pci_detach(device_t self)
356 struct xhci_softc *sc = device_get_softc(self);
358 /* during module unload there are lots of children leftover */
359 device_delete_children(self);
361 usb_callout_drain(&sc->sc_callout);
362 xhci_halt_controller(sc);
363 xhci_reset_controller(sc);
365 pci_disable_busmaster(self);
367 if (sc->sc_irq_res && sc->sc_intr_hdl) {
368 bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl);
369 sc->sc_intr_hdl = NULL;
371 if (sc->sc_irq_res) {
372 bus_release_resource(self, SYS_RES_IRQ,
373 rman_get_rid(sc->sc_irq_res), sc->sc_irq_res);
374 sc->sc_irq_res = NULL;
375 pci_release_msi(self);
378 bus_release_resource(self, SYS_RES_MEMORY, PCI_XHCI_CBMEM,
380 sc->sc_io_res = NULL;
382 if (sc->sc_msix_res) {
383 bus_release_resource(self, SYS_RES_MEMORY,
384 rman_get_rid(sc->sc_msix_res), sc->sc_msix_res);
385 sc->sc_msix_res = NULL;
394 xhci_pci_take_controller(device_t self)
396 struct xhci_softc *sc = device_get_softc(self);
403 cparams = XREAD4(sc, capa, XHCI_HCSPARAMS0);
407 /* Synchronise with the BIOS if it owns the controller. */
408 for (eecp = XHCI_HCS0_XECP(cparams) << 2; eecp != 0 && XHCI_XECP_NEXT(eec);
409 eecp += XHCI_XECP_NEXT(eec) << 2) {
410 eec = XREAD4(sc, capa, eecp);
412 if (XHCI_XECP_ID(eec) != XHCI_ID_USB_LEGACY)
414 bios_sem = XREAD1(sc, capa, eecp +
418 device_printf(sc->sc_bus.bdev, "waiting for BIOS "
419 "to give up control\n");
420 XWRITE1(sc, capa, eecp +
421 XHCI_XECP_OS_SEM, 1);
424 bios_sem = XREAD1(sc, capa, eecp +
430 device_printf(sc->sc_bus.bdev,
431 "timed out waiting for BIOS\n");
434 usb_pause_mtx(NULL, hz / 100); /* wait 10ms */