2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
4 * Copyright (c) 2010 Hans Petter Selasky. All rights reserved.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28 #include <sys/cdefs.h>
29 __FBSDID("$FreeBSD$");
31 #include <sys/stdint.h>
32 #include <sys/stddef.h>
33 #include <sys/param.h>
34 #include <sys/queue.h>
35 #include <sys/types.h>
36 #include <sys/systm.h>
37 #include <sys/kernel.h>
39 #include <sys/module.h>
41 #include <sys/mutex.h>
42 #include <sys/condvar.h>
43 #include <sys/sysctl.h>
45 #include <sys/unistd.h>
46 #include <sys/callout.h>
47 #include <sys/malloc.h>
50 #include <dev/usb/usb.h>
51 #include <dev/usb/usbdi.h>
53 #include <dev/usb/usb_core.h>
54 #include <dev/usb/usb_busdma.h>
55 #include <dev/usb/usb_process.h>
56 #include <dev/usb/usb_util.h>
58 #include <dev/usb/usb_controller.h>
59 #include <dev/usb/usb_bus.h>
60 #include <dev/usb/usb_pci.h>
61 #include <dev/usb/controller/xhci.h>
62 #include <dev/usb/controller/xhcireg.h>
65 static device_probe_t xhci_pci_probe;
66 static device_detach_t xhci_pci_detach;
67 static usb_take_controller_t xhci_pci_take_controller;
69 static device_method_t xhci_device_methods[] = {
70 /* device interface */
71 DEVMETHOD(device_probe, xhci_pci_probe),
72 DEVMETHOD(device_attach, xhci_pci_attach),
73 DEVMETHOD(device_detach, xhci_pci_detach),
74 DEVMETHOD(device_suspend, bus_generic_suspend),
75 DEVMETHOD(device_resume, bus_generic_resume),
76 DEVMETHOD(device_shutdown, bus_generic_shutdown),
77 DEVMETHOD(usb_take_controller, xhci_pci_take_controller),
82 DEFINE_CLASS_0(xhci, xhci_pci_driver, xhci_device_methods,
83 sizeof(struct xhci_softc));
85 static devclass_t xhci_devclass;
87 DRIVER_MODULE(xhci, pci, xhci_pci_driver, xhci_devclass, NULL, NULL);
88 MODULE_DEPEND(xhci, usb, 1, 1, 1);
91 xhci_pci_match(device_t self)
93 uint32_t device_id = pci_get_devid(self);
97 return ("AMD KERNCZ USB 3.0 controller");
99 return ("AMD X399 USB 3.0 controller");
100 case 0x43b91022: /* X370 */
101 case 0x43bb1022: /* B350 */
102 return ("AMD 300 Series USB 3.0 controller");
104 return ("AMD FCH USB 3.0 controller");
107 return ("Hygon USB 3.0 controller");
110 return ("NEC uPD720200 USB 3.0 controller");
112 return ("NEC uPD720202 USB 3.0 controller");
115 return ("Fresco Logic FL1000G USB 3.0 controller");
117 return ("Fresco Logic FL1100 USB 3.0 controller");
120 return ("ASMedia ASM1042 USB 3.0 controller");
122 return ("ASMedia ASM1042A USB 3.0 controller");
125 return ("Intel BayTrail USB 3.0 controller");
127 return ("Intel Denverton USB 3.0 controller");
130 return ("Intel Panther Point USB 3.0 controller");
132 return ("Intel Braswell USB 3.0 controller");
134 return ("Intel Gemini Lake USB 3.0 controller");
136 return ("Intel Apollo Lake USB 3.0 controller");
138 return ("Intel Lynx Point USB 3.0 controller");
140 return ("Intel Wildcat Point USB 3.0 controller");
142 return ("Intel Wellsburg USB 3.0 controller");
144 return ("Broadwell Integrated PCH-LP chipset USB 3.0 controller");
146 return ("Intel Sunrise Point-LP USB 3.0 controller");
148 return ("Intel Sunrise Point USB 3.0 controller");
150 return ("Intel Lewisburg USB 3.0 controller");
152 return ("Intel Union Point USB 3.0 controller");
154 return ("Intel Cannon Lake USB 3.1 controller");
157 return ("Cavium ThunderX USB 3.0 controller");
163 if ((pci_get_class(self) == PCIC_SERIALBUS)
164 && (pci_get_subclass(self) == PCIS_SERIALBUS_USB)
165 && (pci_get_progif(self) == PCIP_SERIALBUS_USB_XHCI)) {
166 return ("XHCI (generic) USB 3.0 controller");
168 return (NULL); /* dunno */
172 xhci_pci_probe(device_t self)
174 const char *desc = xhci_pci_match(self);
177 device_set_desc(self, desc);
178 return (BUS_PROBE_DEFAULT);
184 static int xhci_use_msi = 1;
185 TUNABLE_INT("hw.usb.xhci.msi", &xhci_use_msi);
186 static int xhci_use_msix = 1;
187 TUNABLE_INT("hw.usb.xhci.msix", &xhci_use_msix);
190 xhci_interrupt_poll(void *_sc)
192 struct xhci_softc *sc = _sc;
193 USB_BUS_UNLOCK(&sc->sc_bus);
195 USB_BUS_LOCK(&sc->sc_bus);
196 usb_callout_reset(&sc->sc_callout, 1, (void *)&xhci_interrupt_poll, sc);
200 xhci_pci_port_route(device_t self, uint32_t set, uint32_t clear)
206 temp = pci_read_config(self, PCI_XHCI_INTEL_USB3_PSSEN, 4) |
207 pci_read_config(self, PCI_XHCI_INTEL_XUSB2PR, 4);
212 /* Don't set bits which the hardware doesn't support */
213 usb3_mask = pci_read_config(self, PCI_XHCI_INTEL_USB3PRM, 4);
214 usb2_mask = pci_read_config(self, PCI_XHCI_INTEL_USB2PRM, 4);
216 pci_write_config(self, PCI_XHCI_INTEL_USB3_PSSEN, temp & usb3_mask, 4);
217 pci_write_config(self, PCI_XHCI_INTEL_XUSB2PR, temp & usb2_mask, 4);
219 device_printf(self, "Port routing mask set to 0x%08x\n", temp);
225 xhci_pci_attach(device_t self)
227 struct xhci_softc *sc = device_get_softc(self);
228 int count, err, msix_table, rid;
230 uint8_t usedma32 = 0;
232 rid = PCI_XHCI_CBMEM;
233 sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid,
235 if (!sc->sc_io_res) {
236 device_printf(self, "Could not map memory\n");
239 sc->sc_io_tag = rman_get_bustag(sc->sc_io_res);
240 sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res);
241 sc->sc_io_size = rman_get_size(sc->sc_io_res);
243 switch (pci_get_devid(self)) {
244 case 0x01941033: /* NEC uPD720200 USB 3.0 controller */
245 case 0x00141912: /* NEC uPD720201 USB 3.0 controller */
246 /* Don't use 64-bit DMA on these controllers. */
249 case 0x10001b73: /* FL1000G */
250 /* Fresco Logic host doesn't support MSI. */
253 case 0x0f358086: /* BayTrail */
254 case 0x9c318086: /* Panther Point */
255 case 0x1e318086: /* Panther Point */
256 case 0x8c318086: /* Lynx Point */
257 case 0x8cb18086: /* Wildcat Point */
258 case 0x9cb18086: /* Broadwell Mobile Integrated */
260 * On Intel chipsets, reroute ports from EHCI to XHCI
261 * controller and use a different IMOD value.
263 sc->sc_port_route = &xhci_pci_port_route;
264 sc->sc_imod_default = XHCI_IMOD_DEFAULT_LP;
269 if (xhci_init(sc, self, usedma32)) {
270 device_printf(self, "Could not initialize softc\n");
271 bus_release_resource(self, SYS_RES_MEMORY, PCI_XHCI_CBMEM,
276 pci_enable_busmaster(self);
278 usb_callout_init_mtx(&sc->sc_callout, &sc->sc_bus.bus_mtx, 0);
281 if (xhci_use_msix && (msix_table = pci_msix_table_bar(self)) >= 0) {
282 if (msix_table == PCI_XHCI_CBMEM) {
283 sc->sc_msix_res = sc->sc_io_res;
285 sc->sc_msix_res = bus_alloc_resource_any(self,
286 SYS_RES_MEMORY, &msix_table, RF_ACTIVE);
287 if (sc->sc_msix_res == NULL) {
288 /* May not be enabled */
290 "Unable to map MSI-X table\n");
293 if (sc->sc_msix_res != NULL) {
295 if (pci_alloc_msix(self, &count) == 0) {
297 device_printf(self, "MSI-X enabled\n");
300 if (sc->sc_msix_res != sc->sc_io_res) {
301 bus_release_resource(self,
303 msix_table, sc->sc_msix_res);
305 sc->sc_msix_res = NULL;
309 if (rid == 0 && xhci_use_msi && usemsi) {
311 if (pci_alloc_msi(self, &count) == 0) {
313 device_printf(self, "MSI enabled\n");
317 sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid,
318 RF_ACTIVE | (rid != 0 ? 0 : RF_SHAREABLE));
319 if (sc->sc_irq_res == NULL) {
320 pci_release_msi(self);
321 device_printf(self, "Could not allocate IRQ\n");
322 /* goto error; FALLTHROUGH - use polling */
324 sc->sc_bus.bdev = device_add_child(self, "usbus", -1);
325 if (sc->sc_bus.bdev == NULL) {
326 device_printf(self, "Could not add USB device\n");
329 device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus);
331 sprintf(sc->sc_vendor, "0x%04x", pci_get_vendor(self));
333 if (sc->sc_irq_res != NULL) {
334 err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
335 NULL, (driver_intr_t *)xhci_interrupt, sc, &sc->sc_intr_hdl);
337 bus_release_resource(self, SYS_RES_IRQ,
338 rman_get_rid(sc->sc_irq_res), sc->sc_irq_res);
339 sc->sc_irq_res = NULL;
340 pci_release_msi(self);
341 device_printf(self, "Could not setup IRQ, err=%d\n", err);
342 sc->sc_intr_hdl = NULL;
345 if (sc->sc_irq_res == NULL || sc->sc_intr_hdl == NULL) {
346 if (xhci_use_polling() != 0) {
347 device_printf(self, "Interrupt polling at %dHz\n", hz);
348 USB_BUS_LOCK(&sc->sc_bus);
349 xhci_interrupt_poll(sc);
350 USB_BUS_UNLOCK(&sc->sc_bus);
355 xhci_pci_take_controller(self);
357 err = xhci_halt_controller(sc);
360 err = xhci_start_controller(sc);
363 err = device_probe_and_attach(sc->sc_bus.bdev);
366 device_printf(self, "XHCI halt/start/probe failed err=%d\n", err);
372 xhci_pci_detach(self);
377 xhci_pci_detach(device_t self)
379 struct xhci_softc *sc = device_get_softc(self);
381 /* during module unload there are lots of children leftover */
382 device_delete_children(self);
384 usb_callout_drain(&sc->sc_callout);
385 xhci_halt_controller(sc);
386 xhci_reset_controller(sc);
388 pci_disable_busmaster(self);
390 if (sc->sc_irq_res && sc->sc_intr_hdl) {
391 bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl);
392 sc->sc_intr_hdl = NULL;
394 if (sc->sc_irq_res) {
395 bus_release_resource(self, SYS_RES_IRQ,
396 rman_get_rid(sc->sc_irq_res), sc->sc_irq_res);
397 sc->sc_irq_res = NULL;
398 pci_release_msi(self);
400 if (sc->sc_msix_res != NULL && sc->sc_msix_res != sc->sc_io_res) {
401 bus_release_resource(self, SYS_RES_MEMORY,
402 rman_get_rid(sc->sc_msix_res), sc->sc_msix_res);
403 sc->sc_msix_res = NULL;
406 bus_release_resource(self, SYS_RES_MEMORY, PCI_XHCI_CBMEM,
408 sc->sc_io_res = NULL;
417 xhci_pci_take_controller(device_t self)
419 struct xhci_softc *sc = device_get_softc(self);
426 cparams = XREAD4(sc, capa, XHCI_HCSPARAMS0);
430 /* Synchronise with the BIOS if it owns the controller. */
431 for (eecp = XHCI_HCS0_XECP(cparams) << 2; eecp != 0 && XHCI_XECP_NEXT(eec);
432 eecp += XHCI_XECP_NEXT(eec) << 2) {
433 eec = XREAD4(sc, capa, eecp);
435 if (XHCI_XECP_ID(eec) != XHCI_ID_USB_LEGACY)
437 bios_sem = XREAD1(sc, capa, eecp +
441 device_printf(sc->sc_bus.bdev, "waiting for BIOS "
442 "to give up control\n");
443 XWRITE1(sc, capa, eecp +
444 XHCI_XECP_OS_SEM, 1);
447 bios_sem = XREAD1(sc, capa, eecp +
453 device_printf(sc->sc_bus.bdev,
454 "timed out waiting for BIOS\n");
457 usb_pause_mtx(NULL, hz / 100); /* wait 10ms */