2 * Copyright (c) 1997, 1998, 1999, 2000
3 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. All advertising materials mentioning features or use of this software
14 * must display the following acknowledgement:
15 * This product includes software developed by Bill Paul.
16 * 4. Neither the name of the author nor the names of any co-contributors
17 * may be used to endorse or promote products derived from this software
18 * without specific prior written permission.
20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
30 * THE POSSIBILITY OF SUCH DAMAGE.
36 * Definitions for the KLSI KL5KUSB101B USB to ethernet controller.
37 * The KLSI part is controlled via vendor control requests, the structure
38 * of which depend a bit on the firmware running on the internal
39 * microcontroller. The one exception is the 'send scan data' command,
40 * which is used to load the firmware.
43 #define KUE_CMD_GET_ETHER_DESCRIPTOR 0x00
44 #define KUE_CMD_SET_MCAST_FILTERS 0x01
45 #define KUE_CMD_SET_PKT_FILTER 0x02
46 #define KUE_CMD_GET_ETHERSTATS 0x03
47 #define KUE_CMD_GET_GPIO 0x04
48 #define KUE_CMD_SET_GPIO 0x05
49 #define KUE_CMD_SET_MAC 0x06
50 #define KUE_CMD_GET_MAC 0x07
51 #define KUE_CMD_SET_URB_SIZE 0x08
52 #define KUE_CMD_SET_SOFS 0x09
53 #define KUE_CMD_SET_EVEN_PKTS 0x0A
54 #define KUE_CMD_SEND_SCAN 0xFF
56 struct kue_ether_desc {
60 u_int8_t kue_macaddr[ETHER_ADDR_LEN];
61 u_int8_t kue_etherstats[4];
62 u_int8_t kue_maxseg[2];
63 u_int8_t kue_mcastfilt[2];
67 #define KUE_ETHERSTATS(x) \
68 (*(u_int32_t *)&(x)->kue_desc.kue_etherstats)
69 #define KUE_MAXSEG(x) \
70 (*(u_int16_t *)&(x)->kue_desc.kue_maxseg)
71 #define KUE_MCFILTCNT(x) \
72 ((*(u_int16_t *)&(x)->kue_desc.kue_mcastfilt) & 0x7FFF)
73 #define KUE_MCFILT(x, y) \
74 (char *)&(sc->kue_mcfilters[y * ETHER_ADDR_LEN])
76 #define KUE_STAT_TX_OK 0x00000001
77 #define KUE_STAT_RX_OK 0x00000002
78 #define KUE_STAT_TX_ERR 0x00000004
79 #define KUE_STAT_RX_ERR 0x00000008
80 #define KUE_STAT_RX_NOBUF 0x00000010
81 #define KUE_STAT_TX_UCAST_BYTES 0x00000020
82 #define KUE_STAT_TX_UCAST_FRAMES 0x00000040
83 #define KUE_STAT_TX_MCAST_BYTES 0x00000080
84 #define KUE_STAT_TX_MCAST_FRAMES 0x00000100
85 #define KUE_STAT_TX_BCAST_BYTES 0x00000200
86 #define KUE_STAT_TX_BCAST_FRAMES 0x00000400
87 #define KUE_STAT_RX_UCAST_BYTES 0x00000800
88 #define KUE_STAT_RX_UCAST_FRAMES 0x00001000
89 #define KUE_STAT_RX_MCAST_BYTES 0x00002000
90 #define KUE_STAT_RX_MCAST_FRAMES 0x00004000
91 #define KUE_STAT_RX_BCAST_BYTES 0x00008000
92 #define KUE_STAT_RX_BCAST_FRAMES 0x00010000
93 #define KUE_STAT_RX_CRCERR 0x00020000
94 #define KUE_STAT_TX_QUEUE_LENGTH 0x00040000
95 #define KUE_STAT_RX_ALIGNERR 0x00080000
96 #define KUE_STAT_TX_SINGLECOLL 0x00100000
97 #define KUE_STAT_TX_MULTICOLL 0x00200000
98 #define KUE_STAT_TX_DEFERRED 0x00400000
99 #define KUE_STAT_TX_MAXCOLLS 0x00800000
100 #define KUE_STAT_RX_OVERRUN 0x01000000
101 #define KUE_STAT_TX_UNDERRUN 0x02000000
102 #define KUE_STAT_TX_SQE_ERR 0x04000000
103 #define KUE_STAT_TX_CARRLOSS 0x08000000
104 #define KUE_STAT_RX_LATECOLL 0x10000000
106 #define KUE_RXFILT_PROMISC 0x0001
107 #define KUE_RXFILT_ALLMULTI 0x0002
108 #define KUE_RXFILT_UNICAST 0x0004
109 #define KUE_RXFILT_BROADCAST 0x0008
110 #define KUE_RXFILT_MULTICAST 0x0010
112 #define KUE_TIMEOUT 1000
113 #define KUE_BUFSZ 1536
114 #define KUE_MIN_FRAMELEN 60
116 #define KUE_RX_LIST_CNT 1
117 #define KUE_TX_LIST_CNT 1
119 #define KUE_CTL_READ 0x01
120 #define KUE_CTL_WRITE 0x02
122 #define KUE_CONFIG_NO 1
123 #define KUE_IFACE_IDX 0
126 * The interrupt endpoint is currently unused
129 #define KUE_ENDPT_RX 0x0
130 #define KUE_ENDPT_TX 0x1
131 #define KUE_ENDPT_INTR 0x2
132 #define KUE_ENDPT_MAX 0x3
142 struct kue_softc *kue_sc;
143 usbd_xfer_handle kue_xfer;
145 struct mbuf *kue_mbuf;
150 struct kue_chain kue_tx_chain[KUE_TX_LIST_CNT];
151 struct kue_chain kue_rx_chain[KUE_RX_LIST_CNT];
158 #define KUE_INC(x, y) (x) = (x + 1) % y
161 struct arpcom arpcom;
162 usbd_device_handle kue_udev;
163 usbd_interface_handle kue_iface;
164 struct kue_ether_desc kue_desc;
165 int kue_ed[KUE_ENDPT_MAX];
166 usbd_pipe_handle kue_ep[KUE_ENDPT_MAX];
169 u_int16_t kue_rxfilt;
170 u_int8_t *kue_mcfilters;
171 struct kue_cdata kue_cdata;
174 struct timeval kue_rx_notice;
178 #define KUE_LOCK(_sc) mtx_lock(&(_sc)->kue_mtx)
179 #define KUE_UNLOCK(_sc) mtx_unlock(&(_sc)->kue_mtx)
181 #define KUE_LOCK(_sc)
182 #define KUE_UNLOCK(_sc)