1 /* $NetBSD: umodem.c,v 1.45 2002/09/23 05:51:23 simonb Exp $ */
7 * Copyright (c) 2003, M. Warner Losh <imp@FreeBSD.org>.
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
23 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
33 * Copyright (c) 1998 The NetBSD Foundation, Inc.
34 * All rights reserved.
36 * This code is derived from software contributed to The NetBSD Foundation
37 * by Lennart Augustsson (lennart@augustsson.net) at
38 * Carlstedt Research & Technology.
40 * Redistribution and use in source and binary forms, with or without
41 * modification, are permitted provided that the following conditions
43 * 1. Redistributions of source code must retain the above copyright
44 * notice, this list of conditions and the following disclaimer.
45 * 2. Redistributions in binary form must reproduce the above copyright
46 * notice, this list of conditions and the following disclaimer in the
47 * documentation and/or other materials provided with the distribution.
48 * 3. All advertising materials mentioning features or use of this software
49 * must display the following acknowledgement:
50 * This product includes software developed by the NetBSD
51 * Foundation, Inc. and its contributors.
52 * 4. Neither the name of The NetBSD Foundation nor the names of its
53 * contributors may be used to endorse or promote products derived
54 * from this software without specific prior written permission.
56 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
57 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
58 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
59 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
60 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
61 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
62 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
63 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
64 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
65 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
66 * POSSIBILITY OF SUCH DAMAGE.
70 * Comm Class spec: http://www.usb.org/developers/devclass_docs/usbccs10.pdf
71 * http://www.usb.org/developers/devclass_docs/usbcdc11.pdf
72 * http://www.usb.org/developers/devclass_docs/cdc_wmc10.zip
77 * - Add error recovery in various places; the big problem is what
78 * to do in a callback if there is an error.
79 * - Implement a Call Device for modems without multiplexed commands.
83 #include <sys/stdint.h>
84 #include <sys/stddef.h>
85 #include <sys/param.h>
86 #include <sys/queue.h>
87 #include <sys/types.h>
88 #include <sys/systm.h>
89 #include <sys/kernel.h>
91 #include <sys/module.h>
93 #include <sys/mutex.h>
94 #include <sys/condvar.h>
95 #include <sys/sysctl.h>
97 #include <sys/unistd.h>
98 #include <sys/callout.h>
99 #include <sys/malloc.h>
100 #include <sys/priv.h>
102 #include <dev/usb/usb.h>
103 #include <dev/usb/usbdi.h>
104 #include <dev/usb/usbdi_util.h>
105 #include <dev/usb/usbhid.h>
106 #include <dev/usb/usb_cdc.h>
109 #include <dev/usb/usb_ioctl.h>
111 #define USB_DEBUG_VAR umodem_debug
112 #include <dev/usb/usb_debug.h>
113 #include <dev/usb/usb_process.h>
114 #include <dev/usb/quirk/usb_quirk.h>
116 #include <dev/usb/serial/usb_serial.h>
119 static int umodem_debug = 0;
121 SYSCTL_NODE(_hw_usb, OID_AUTO, umodem, CTLFLAG_RW, 0, "USB umodem");
122 SYSCTL_INT(_hw_usb_umodem, OID_AUTO, debug, CTLFLAG_RW,
123 &umodem_debug, 0, "Debug level");
126 static const struct usb_device_id umodem_devs[] = {
127 /* Generic Modem class match */
128 {USB_IFACE_CLASS(UICLASS_CDC),
129 USB_IFACE_SUBCLASS(UISUBCLASS_ABSTRACT_CONTROL_MODEL),
130 USB_IFACE_PROTOCOL(UIPROTO_CDC_AT)},
131 /* Kyocera AH-K3001V */
132 {USB_VPI(USB_VENDOR_KYOCERA, USB_PRODUCT_KYOCERA_AHK3001V, 1)},
133 {USB_VPI(USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_MC5720, 1)},
134 {USB_VPI(USB_VENDOR_CURITEL, USB_PRODUCT_CURITEL_PC5740, 1)},
138 * As speeds for umodem deivces increase, these numbers will need to
139 * be increased. They should be good for G3 speeds and below.
141 * TODO: The TTY buffers should be increased!
143 #define UMODEM_BUF_SIZE 1024
152 #define UMODEM_MODVER 1 /* module version */
154 struct umodem_softc {
155 struct ucom_super_softc sc_super_ucom;
156 struct ucom_softc sc_ucom;
158 struct usb_xfer *sc_xfer[UMODEM_N_TRANSFER];
159 struct usb_device *sc_udev;
164 uint8_t sc_lsr; /* local status register */
165 uint8_t sc_msr; /* modem status register */
166 uint8_t sc_ctrl_iface_no;
167 uint8_t sc_data_iface_no;
168 uint8_t sc_iface_index[2];
169 uint8_t sc_cm_over_data;
170 uint8_t sc_cm_cap; /* CM capabilities */
171 uint8_t sc_acm_cap; /* ACM capabilities */
174 static device_probe_t umodem_probe;
175 static device_attach_t umodem_attach;
176 static device_detach_t umodem_detach;
178 static usb_callback_t umodem_intr_callback;
179 static usb_callback_t umodem_write_callback;
180 static usb_callback_t umodem_read_callback;
182 static void umodem_start_read(struct ucom_softc *);
183 static void umodem_stop_read(struct ucom_softc *);
184 static void umodem_start_write(struct ucom_softc *);
185 static void umodem_stop_write(struct ucom_softc *);
186 static void umodem_get_caps(struct usb_attach_arg *, uint8_t *, uint8_t *);
187 static void umodem_cfg_get_status(struct ucom_softc *, uint8_t *,
189 static int umodem_pre_param(struct ucom_softc *, struct termios *);
190 static void umodem_cfg_param(struct ucom_softc *, struct termios *);
191 static int umodem_ioctl(struct ucom_softc *, uint32_t, caddr_t, int,
193 static void umodem_cfg_set_dtr(struct ucom_softc *, uint8_t);
194 static void umodem_cfg_set_rts(struct ucom_softc *, uint8_t);
195 static void umodem_cfg_set_break(struct ucom_softc *, uint8_t);
196 static void *umodem_get_desc(struct usb_attach_arg *, uint8_t, uint8_t);
197 static usb_error_t umodem_set_comm_feature(struct usb_device *, uint8_t,
199 static void umodem_poll(struct ucom_softc *ucom);
200 static void umodem_find_data_iface(struct usb_attach_arg *uaa,
201 uint8_t, uint8_t *, uint8_t *);
203 static const struct usb_config umodem_config[UMODEM_N_TRANSFER] = {
207 .endpoint = UE_ADDR_ANY,
208 .direction = UE_DIR_OUT,
210 .bufsize = UMODEM_BUF_SIZE,
211 .flags = {.pipe_bof = 1,.force_short_xfer = 1,},
212 .callback = &umodem_write_callback,
217 .endpoint = UE_ADDR_ANY,
218 .direction = UE_DIR_IN,
220 .bufsize = UMODEM_BUF_SIZE,
221 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
222 .callback = &umodem_read_callback,
226 .type = UE_INTERRUPT,
227 .endpoint = UE_ADDR_ANY,
228 .direction = UE_DIR_IN,
230 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,.no_pipe_ok = 1,},
231 .bufsize = 0, /* use wMaxPacketSize */
232 .callback = &umodem_intr_callback,
236 static const struct ucom_callback umodem_callback = {
237 .ucom_cfg_get_status = &umodem_cfg_get_status,
238 .ucom_cfg_set_dtr = &umodem_cfg_set_dtr,
239 .ucom_cfg_set_rts = &umodem_cfg_set_rts,
240 .ucom_cfg_set_break = &umodem_cfg_set_break,
241 .ucom_cfg_param = &umodem_cfg_param,
242 .ucom_pre_param = &umodem_pre_param,
243 .ucom_ioctl = &umodem_ioctl,
244 .ucom_start_read = &umodem_start_read,
245 .ucom_stop_read = &umodem_stop_read,
246 .ucom_start_write = &umodem_start_write,
247 .ucom_stop_write = &umodem_stop_write,
248 .ucom_poll = &umodem_poll,
251 static device_method_t umodem_methods[] = {
252 DEVMETHOD(device_probe, umodem_probe),
253 DEVMETHOD(device_attach, umodem_attach),
254 DEVMETHOD(device_detach, umodem_detach),
258 static devclass_t umodem_devclass;
260 static driver_t umodem_driver = {
262 .methods = umodem_methods,
263 .size = sizeof(struct umodem_softc),
266 DRIVER_MODULE(umodem, uhub, umodem_driver, umodem_devclass, NULL, 0);
267 MODULE_DEPEND(umodem, ucom, 1, 1, 1);
268 MODULE_DEPEND(umodem, usb, 1, 1, 1);
269 MODULE_VERSION(umodem, UMODEM_MODVER);
272 umodem_probe(device_t dev)
274 struct usb_attach_arg *uaa = device_get_ivars(dev);
279 if (uaa->usb_mode != USB_MODE_HOST) {
282 error = usbd_lookup_id_by_uaa(umodem_devs, sizeof(umodem_devs), uaa);
287 umodem_attach(device_t dev)
289 struct usb_attach_arg *uaa = device_get_ivars(dev);
290 struct umodem_softc *sc = device_get_softc(dev);
291 struct usb_cdc_cm_descriptor *cmd;
292 struct usb_cdc_union_descriptor *cud;
296 device_set_usb_desc(dev);
297 mtx_init(&sc->sc_mtx, "umodem", NULL, MTX_DEF);
299 sc->sc_ctrl_iface_no = uaa->info.bIfaceNum;
300 sc->sc_iface_index[1] = uaa->info.bIfaceIndex;
301 sc->sc_udev = uaa->device;
303 umodem_get_caps(uaa, &sc->sc_cm_cap, &sc->sc_acm_cap);
305 /* get the data interface number */
307 cmd = umodem_get_desc(uaa, UDESC_CS_INTERFACE, UDESCSUB_CDC_CM);
309 if ((cmd == NULL) || (cmd->bLength < sizeof(*cmd))) {
311 cud = usbd_find_descriptor(uaa->device, NULL,
312 uaa->info.bIfaceIndex, UDESC_CS_INTERFACE,
313 0 - 1, UDESCSUB_CDC_UNION, 0 - 1);
315 if ((cud == NULL) || (cud->bLength < sizeof(*cud))) {
316 DPRINTF("Missing descriptor. "
317 "Assuming data interface is next.\n");
318 if (sc->sc_ctrl_iface_no == 0xFF) {
321 uint8_t class_match = 0;
323 /* set default interface number */
324 sc->sc_data_iface_no = 0xFF;
326 /* try to find the data interface backwards */
327 umodem_find_data_iface(uaa,
328 uaa->info.bIfaceIndex - 1,
329 &sc->sc_data_iface_no, &class_match);
331 /* try to find the data interface forwards */
332 umodem_find_data_iface(uaa,
333 uaa->info.bIfaceIndex + 1,
334 &sc->sc_data_iface_no, &class_match);
336 /* check if nothing was found */
337 if (sc->sc_data_iface_no == 0xFF)
341 sc->sc_data_iface_no = cud->bSlaveInterface[0];
344 sc->sc_data_iface_no = cmd->bDataInterface;
347 device_printf(dev, "data interface %d, has %sCM over "
348 "data, has %sbreak\n",
349 sc->sc_data_iface_no,
350 sc->sc_cm_cap & USB_CDC_CM_OVER_DATA ? "" : "no ",
351 sc->sc_acm_cap & USB_CDC_ACM_HAS_BREAK ? "" : "no ");
353 /* get the data interface too */
356 struct usb_interface *iface;
357 struct usb_interface_descriptor *id;
359 iface = usbd_get_iface(uaa->device, i);
363 id = usbd_get_interface_descriptor(iface);
365 if (id && (id->bInterfaceNumber == sc->sc_data_iface_no)) {
366 sc->sc_iface_index[0] = i;
367 usbd_set_parent_iface(uaa->device, i, uaa->info.bIfaceIndex);
371 device_printf(dev, "no data interface\n");
376 if (usb_test_quirk(uaa, UQ_ASSUME_CM_OVER_DATA)) {
377 sc->sc_cm_over_data = 1;
379 if (sc->sc_cm_cap & USB_CDC_CM_OVER_DATA) {
380 if (sc->sc_acm_cap & USB_CDC_ACM_HAS_FEATURE) {
382 error = umodem_set_comm_feature
383 (uaa->device, sc->sc_ctrl_iface_no,
384 UCDC_ABSTRACT_STATE, UCDC_DATA_MULTIPLEXED);
386 /* ignore any errors */
388 sc->sc_cm_over_data = 1;
391 error = usbd_transfer_setup(uaa->device,
392 sc->sc_iface_index, sc->sc_xfer,
393 umodem_config, UMODEM_N_TRANSFER,
399 /* clear stall at first run */
400 mtx_lock(&sc->sc_mtx);
401 usbd_xfer_set_stall(sc->sc_xfer[UMODEM_BULK_WR]);
402 usbd_xfer_set_stall(sc->sc_xfer[UMODEM_BULK_RD]);
403 mtx_unlock(&sc->sc_mtx);
405 error = ucom_attach(&sc->sc_super_ucom, &sc->sc_ucom, 1, sc,
406 &umodem_callback, &sc->sc_mtx);
410 ucom_set_pnpinfo_usb(&sc->sc_super_ucom, dev);
420 umodem_find_data_iface(struct usb_attach_arg *uaa,
421 uint8_t iface_index, uint8_t *p_data_no, uint8_t *p_match_class)
423 struct usb_interface_descriptor *id;
424 struct usb_interface *iface;
426 iface = usbd_get_iface(uaa->device, iface_index);
428 /* check for end of interfaces */
432 id = usbd_get_interface_descriptor(iface);
434 /* check for non-matching interface class */
435 if (id->bInterfaceClass != UICLASS_CDC_DATA ||
436 id->bInterfaceSubClass != UISUBCLASS_DATA) {
437 /* if we got a class match then return */
444 DPRINTFN(11, "Match at index %u\n", iface_index);
446 *p_data_no = id->bInterfaceNumber;
450 umodem_start_read(struct ucom_softc *ucom)
452 struct umodem_softc *sc = ucom->sc_parent;
454 /* start interrupt endpoint, if any */
455 usbd_transfer_start(sc->sc_xfer[UMODEM_INTR_RD]);
457 /* start read endpoint */
458 usbd_transfer_start(sc->sc_xfer[UMODEM_BULK_RD]);
462 umodem_stop_read(struct ucom_softc *ucom)
464 struct umodem_softc *sc = ucom->sc_parent;
466 /* stop interrupt endpoint, if any */
467 usbd_transfer_stop(sc->sc_xfer[UMODEM_INTR_RD]);
469 /* stop read endpoint */
470 usbd_transfer_stop(sc->sc_xfer[UMODEM_BULK_RD]);
474 umodem_start_write(struct ucom_softc *ucom)
476 struct umodem_softc *sc = ucom->sc_parent;
478 usbd_transfer_start(sc->sc_xfer[UMODEM_BULK_WR]);
482 umodem_stop_write(struct ucom_softc *ucom)
484 struct umodem_softc *sc = ucom->sc_parent;
486 usbd_transfer_stop(sc->sc_xfer[UMODEM_BULK_WR]);
490 umodem_get_caps(struct usb_attach_arg *uaa, uint8_t *cm, uint8_t *acm)
492 struct usb_cdc_cm_descriptor *cmd;
493 struct usb_cdc_acm_descriptor *cad;
495 cmd = umodem_get_desc(uaa, UDESC_CS_INTERFACE, UDESCSUB_CDC_CM);
496 if ((cmd == NULL) || (cmd->bLength < sizeof(*cmd))) {
497 DPRINTF("no CM desc (faking one)\n");
498 *cm = USB_CDC_CM_DOES_CM | USB_CDC_CM_OVER_DATA;
500 *cm = cmd->bmCapabilities;
502 cad = umodem_get_desc(uaa, UDESC_CS_INTERFACE, UDESCSUB_CDC_ACM);
503 if ((cad == NULL) || (cad->bLength < sizeof(*cad))) {
504 DPRINTF("no ACM desc\n");
507 *acm = cad->bmCapabilities;
511 umodem_cfg_get_status(struct ucom_softc *ucom, uint8_t *lsr, uint8_t *msr)
513 struct umodem_softc *sc = ucom->sc_parent;
522 umodem_pre_param(struct ucom_softc *ucom, struct termios *t)
524 return (0); /* we accept anything */
528 umodem_cfg_param(struct ucom_softc *ucom, struct termios *t)
530 struct umodem_softc *sc = ucom->sc_parent;
531 struct usb_cdc_line_state ls;
532 struct usb_device_request req;
534 DPRINTF("sc=%p\n", sc);
536 bzero(&ls, sizeof(ls));
538 USETDW(ls.dwDTERate, t->c_ospeed);
540 ls.bCharFormat = (t->c_cflag & CSTOPB) ?
541 UCDC_STOP_BIT_2 : UCDC_STOP_BIT_1;
543 ls.bParityType = (t->c_cflag & PARENB) ?
544 ((t->c_cflag & PARODD) ?
545 UCDC_PARITY_ODD : UCDC_PARITY_EVEN) : UCDC_PARITY_NONE;
547 switch (t->c_cflag & CSIZE) {
562 DPRINTF("rate=%d fmt=%d parity=%d bits=%d\n",
563 UGETDW(ls.dwDTERate), ls.bCharFormat,
564 ls.bParityType, ls.bDataBits);
566 req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
567 req.bRequest = UCDC_SET_LINE_CODING;
568 USETW(req.wValue, 0);
569 req.wIndex[0] = sc->sc_ctrl_iface_no;
571 USETW(req.wLength, sizeof(ls));
573 ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
578 umodem_ioctl(struct ucom_softc *ucom, uint32_t cmd, caddr_t data,
579 int flag, struct thread *td)
581 struct umodem_softc *sc = ucom->sc_parent;
584 DPRINTF("cmd=0x%08x\n", cmd);
587 case USB_GET_CM_OVER_DATA:
588 *(int *)data = sc->sc_cm_over_data;
591 case USB_SET_CM_OVER_DATA:
592 if (*(int *)data != sc->sc_cm_over_data) {
598 DPRINTF("unknown\n");
607 umodem_cfg_set_dtr(struct ucom_softc *ucom, uint8_t onoff)
609 struct umodem_softc *sc = ucom->sc_parent;
610 struct usb_device_request req;
612 DPRINTF("onoff=%d\n", onoff);
615 sc->sc_line |= UCDC_LINE_DTR;
617 sc->sc_line &= ~UCDC_LINE_DTR;
619 req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
620 req.bRequest = UCDC_SET_CONTROL_LINE_STATE;
621 USETW(req.wValue, sc->sc_line);
622 req.wIndex[0] = sc->sc_ctrl_iface_no;
624 USETW(req.wLength, 0);
626 ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
627 &req, NULL, 0, 1000);
631 umodem_cfg_set_rts(struct ucom_softc *ucom, uint8_t onoff)
633 struct umodem_softc *sc = ucom->sc_parent;
634 struct usb_device_request req;
636 DPRINTF("onoff=%d\n", onoff);
639 sc->sc_line |= UCDC_LINE_RTS;
641 sc->sc_line &= ~UCDC_LINE_RTS;
643 req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
644 req.bRequest = UCDC_SET_CONTROL_LINE_STATE;
645 USETW(req.wValue, sc->sc_line);
646 req.wIndex[0] = sc->sc_ctrl_iface_no;
648 USETW(req.wLength, 0);
650 ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
651 &req, NULL, 0, 1000);
655 umodem_cfg_set_break(struct ucom_softc *ucom, uint8_t onoff)
657 struct umodem_softc *sc = ucom->sc_parent;
658 struct usb_device_request req;
661 DPRINTF("onoff=%d\n", onoff);
663 if (sc->sc_acm_cap & USB_CDC_ACM_HAS_BREAK) {
665 temp = onoff ? UCDC_BREAK_ON : UCDC_BREAK_OFF;
667 req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
668 req.bRequest = UCDC_SEND_BREAK;
669 USETW(req.wValue, temp);
670 req.wIndex[0] = sc->sc_ctrl_iface_no;
672 USETW(req.wLength, 0);
674 ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
675 &req, NULL, 0, 1000);
680 umodem_intr_callback(struct usb_xfer *xfer, usb_error_t error)
682 struct usb_cdc_notification pkt;
683 struct umodem_softc *sc = usbd_xfer_softc(xfer);
684 struct usb_page_cache *pc;
688 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
690 switch (USB_GET_STATE(xfer)) {
691 case USB_ST_TRANSFERRED:
694 DPRINTF("received short packet, "
695 "%d bytes\n", actlen);
698 if (actlen > sizeof(pkt)) {
699 DPRINTF("truncating message\n");
700 actlen = sizeof(pkt);
702 pc = usbd_xfer_get_frame(xfer, 0);
703 usbd_copy_out(pc, 0, &pkt, actlen);
707 wLen = UGETW(pkt.wLength);
711 if (pkt.bmRequestType != UCDC_NOTIFICATION) {
712 DPRINTF("unknown message type, "
713 "0x%02x, on notify pipe!\n",
717 switch (pkt.bNotification) {
718 case UCDC_N_SERIAL_STATE:
720 * Set the serial state in ucom driver based on
721 * the bits from the notify message
724 DPRINTF("invalid notification "
725 "length, %d bytes!\n", actlen);
728 DPRINTF("notify bytes = %02x%02x\n",
732 /* Currently, lsr is always zero. */
736 if (pkt.data[0] & UCDC_N_SERIAL_RI) {
737 sc->sc_msr |= SER_RI;
739 if (pkt.data[0] & UCDC_N_SERIAL_DSR) {
740 sc->sc_msr |= SER_DSR;
742 if (pkt.data[0] & UCDC_N_SERIAL_DCD) {
743 sc->sc_msr |= SER_DCD;
745 ucom_status_change(&sc->sc_ucom);
749 DPRINTF("unknown notify message: 0x%02x\n",
756 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
757 usbd_transfer_submit(xfer);
761 if (error != USB_ERR_CANCELLED) {
762 /* try to clear stall first */
763 usbd_xfer_set_stall(xfer);
772 umodem_write_callback(struct usb_xfer *xfer, usb_error_t error)
774 struct umodem_softc *sc = usbd_xfer_softc(xfer);
775 struct usb_page_cache *pc;
778 switch (USB_GET_STATE(xfer)) {
780 case USB_ST_TRANSFERRED:
782 pc = usbd_xfer_get_frame(xfer, 0);
783 if (ucom_get_data(&sc->sc_ucom, pc, 0,
784 UMODEM_BUF_SIZE, &actlen)) {
786 usbd_xfer_set_frame_len(xfer, 0, actlen);
787 usbd_transfer_submit(xfer);
792 if (error != USB_ERR_CANCELLED) {
793 /* try to clear stall first */
794 usbd_xfer_set_stall(xfer);
802 umodem_read_callback(struct usb_xfer *xfer, usb_error_t error)
804 struct umodem_softc *sc = usbd_xfer_softc(xfer);
805 struct usb_page_cache *pc;
808 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
810 switch (USB_GET_STATE(xfer)) {
811 case USB_ST_TRANSFERRED:
813 DPRINTF("actlen=%d\n", actlen);
815 pc = usbd_xfer_get_frame(xfer, 0);
816 ucom_put_data(&sc->sc_ucom, pc, 0, actlen);
820 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
821 usbd_transfer_submit(xfer);
825 if (error != USB_ERR_CANCELLED) {
826 /* try to clear stall first */
827 usbd_xfer_set_stall(xfer);
835 umodem_get_desc(struct usb_attach_arg *uaa, uint8_t type, uint8_t subtype)
837 return (usbd_find_descriptor(uaa->device, NULL, uaa->info.bIfaceIndex,
838 type, 0 - 1, subtype, 0 - 1));
842 umodem_set_comm_feature(struct usb_device *udev, uint8_t iface_no,
843 uint16_t feature, uint16_t state)
845 struct usb_device_request req;
846 struct usb_cdc_abstract_state ast;
848 DPRINTF("feature=%d state=%d\n",
851 req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
852 req.bRequest = UCDC_SET_COMM_FEATURE;
853 USETW(req.wValue, feature);
854 req.wIndex[0] = iface_no;
856 USETW(req.wLength, UCDC_ABSTRACT_STATE_LENGTH);
857 USETW(ast.wState, state);
859 return (usbd_do_request(udev, NULL, &req, &ast));
863 umodem_detach(device_t dev)
865 struct umodem_softc *sc = device_get_softc(dev);
867 DPRINTF("sc=%p\n", sc);
869 ucom_detach(&sc->sc_super_ucom, &sc->sc_ucom);
870 usbd_transfer_unsetup(sc->sc_xfer, UMODEM_N_TRANSFER);
871 mtx_destroy(&sc->sc_mtx);
877 umodem_poll(struct ucom_softc *ucom)
879 struct umodem_softc *sc = ucom->sc_parent;
880 usbd_transfer_poll(sc->sc_xfer, UMODEM_N_TRANSFER);