sys/dev/usb/serial/uslcom.c

   1 /*      $OpenBSD: uslcom.c,v 1.17 2007/11/24 10:52:12 jsg Exp $ */
   2
   3 #include <sys/cdefs.h>
   4 __FBSDID("$FreeBSD$");
   5
   6 /*
   7  * Copyright (c) 2006 Jonathan Gray <jsg@openbsd.org>
   8  *
   9  * Permission to use, copy, modify, and distribute this software for any
  10  * purpose with or without fee is hereby granted, provided that the above
  11  * copyright notice and this permission notice appear in all copies.
  12  *
  13  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  14  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  15  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  16  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  17  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  18  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  19  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  20  */
  21
  22 /*
  23  * Driver for Silicon Laboratories CP2101/CP2102/CP2103/CP2104/CP2105
  24  * USB-Serial adapters.  Based on datasheet AN571, publicly available from
  25  * http://www.silabs.com/Support%20Documents/TechnicalDocs/AN571.pdf
  26  */
  27
  28 #include <sys/stdint.h>
  29 #include <sys/stddef.h>
  30 #include <sys/param.h>
  31 #include <sys/queue.h>
  32 #include <sys/types.h>
  33 #include <sys/systm.h>
  34 #include <sys/kernel.h>
  35 #include <sys/bus.h>
  36 #include <sys/module.h>
  37 #include <sys/lock.h>
  38 #include <sys/mutex.h>
  39 #include <sys/condvar.h>
  40 #include <sys/sysctl.h>
  41 #include <sys/sx.h>
  42 #include <sys/unistd.h>
  43 #include <sys/callout.h>
  44 #include <sys/malloc.h>
  45 #include <sys/priv.h>
  46
  47 #include <dev/usb/usb.h>
  48 #include <dev/usb/usbdi.h>
  49 #include <dev/usb/usbdi_util.h>
  50 #include <dev/usb/usb_ioctl.h>
  51 #include "usbdevs.h"
  52
  53 #define USB_DEBUG_VAR uslcom_debug
  54 #include <dev/usb/usb_debug.h>
  55 #include <dev/usb/usb_process.h>
  56
  57 #include <dev/usb/serial/usb_serial.h>
  58
  59 #ifdef USB_DEBUG
  60 static int uslcom_debug = 0;
  61
  62 static SYSCTL_NODE(_hw_usb, OID_AUTO, uslcom, CTLFLAG_RW, 0, "USB uslcom");
  63 SYSCTL_INT(_hw_usb_uslcom, OID_AUTO, debug, CTLFLAG_RWTUN,
  64     &uslcom_debug, 0, "Debug level");
  65 #endif
  66
  67 #define USLCOM_BULK_BUF_SIZE            1024
  68 #define USLCOM_CONFIG_INDEX     0
  69
  70 /* Request types */
  71 #define USLCOM_WRITE            0x41
  72 #define USLCOM_READ             0xc1
  73
  74 /* Request codes */
  75 #define USLCOM_IFC_ENABLE       0x00
  76 #define USLCOM_SET_BAUDDIV      0x01
  77 #define USLCOM_SET_LINE_CTL     0x03
  78 #define USLCOM_SET_BREAK        0x05
  79 #define USLCOM_SET_MHS          0x07
  80 #define USLCOM_GET_MDMSTS       0x08
  81 #define USLCOM_SET_FLOW         0x13
  82 #define USLCOM_SET_BAUDRATE     0x1e
  83 #define USLCOM_VENDOR_SPECIFIC  0xff
  84
  85 /* USLCOM_IFC_ENABLE values */
  86 #define USLCOM_IFC_ENABLE_DIS   0x00
  87 #define USLCOM_IFC_ENABLE_EN    0x01
  88
  89 /* USLCOM_SET_MHS/USLCOM_GET_MDMSTS values */
  90 #define USLCOM_MHS_DTR_ON       0x0001
  91 #define USLCOM_MHS_DTR_SET      0x0100
  92 #define USLCOM_MHS_RTS_ON       0x0002
  93 #define USLCOM_MHS_RTS_SET      0x0200
  94 #define USLCOM_MHS_CTS          0x0010
  95 #define USLCOM_MHS_DSR          0x0020
  96 #define USLCOM_MHS_RI           0x0040
  97 #define USLCOM_MHS_DCD          0x0080
  98
  99 /* USLCOM_SET_BAUDDIV values */
 100 #define USLCOM_BAUDDIV_REF      3686400 /* 3.6864 MHz */
 101
 102 /* USLCOM_SET_LINE_CTL values */
 103 #define USLCOM_STOP_BITS_1      0x00
 104 #define USLCOM_STOP_BITS_2      0x02
 105 #define USLCOM_PARITY_NONE      0x00
 106 #define USLCOM_PARITY_ODD       0x10
 107 #define USLCOM_PARITY_EVEN      0x20
 108 #define USLCOM_SET_DATA_BITS(x) ((x) << 8)
 109
 110 /* USLCOM_SET_BREAK values */
 111 #define USLCOM_SET_BREAK_OFF    0x00
 112 #define USLCOM_SET_BREAK_ON     0x01
 113
 114 /* USLCOM_SET_FLOW values - 1st word */
 115 #define USLCOM_FLOW_DTR_ON      0x00000001 /* DTR static active */
 116 #define USLCOM_FLOW_CTS_HS      0x00000008 /* CTS handshake */
 117 /* USLCOM_SET_FLOW values - 2nd word */
 118 #define USLCOM_FLOW_RTS_ON      0x00000040 /* RTS static active */
 119 #define USLCOM_FLOW_RTS_HS      0x00000080 /* RTS handshake */
 120
 121 /* USLCOM_VENDOR_SPECIFIC values */
 122 #define USLCOM_GET_PARTNUM      0x370B
 123 #define USLCOM_WRITE_LATCH      0x37E1
 124 #define USLCOM_READ_LATCH       0x00C2
 125
 126 /* USLCOM_GET_PARTNUM values from hardware */
 127 #define USLCOM_PARTNUM_CP2101   1
 128 #define USLCOM_PARTNUM_CP2102   2
 129 #define USLCOM_PARTNUM_CP2103   3
 130 #define USLCOM_PARTNUM_CP2104   4
 131 #define USLCOM_PARTNUM_CP2105   5
 132
 133 enum {
 134         USLCOM_BULK_DT_WR,
 135         USLCOM_BULK_DT_RD,
 136         USLCOM_CTRL_DT_RD,
 137         USLCOM_N_TRANSFER,
 138 };
 139
 140 struct uslcom_softc {
 141         struct ucom_super_softc sc_super_ucom;
 142         struct ucom_softc sc_ucom;
 143         struct usb_callout sc_watchdog;
 144
 145         struct usb_xfer *sc_xfer[USLCOM_N_TRANSFER];
 146         struct usb_device *sc_udev;
 147         struct mtx sc_mtx;
 148
 149         uint8_t          sc_msr;
 150         uint8_t          sc_lsr;
 151         uint8_t          sc_iface_no;
 152         uint8_t          sc_partnum;
 153 };
 154
 155 static device_probe_t uslcom_probe;
 156 static device_attach_t uslcom_attach;
 157 static device_detach_t uslcom_detach;
 158 static void uslcom_free_softc(struct uslcom_softc *);
 159
 160 static usb_callback_t uslcom_write_callback;
 161 static usb_callback_t uslcom_read_callback;
 162 static usb_callback_t uslcom_control_callback;
 163
 164 static void     uslcom_free(struct ucom_softc *);
 165 static void uslcom_open(struct ucom_softc *);
 166 static void uslcom_close(struct ucom_softc *);
 167 static uint8_t uslcom_get_partnum(struct uslcom_softc *);
 168 static void uslcom_set_dtr(struct ucom_softc *, uint8_t);
 169 static void uslcom_set_rts(struct ucom_softc *, uint8_t);
 170 static void uslcom_set_break(struct ucom_softc *, uint8_t);
 171 static int uslcom_ioctl(struct ucom_softc *, uint32_t, caddr_t, int,
 172                 struct thread *);
 173 static int uslcom_pre_param(struct ucom_softc *, struct termios *);
 174 static void uslcom_param(struct ucom_softc *, struct termios *);
 175 static void uslcom_get_status(struct ucom_softc *, uint8_t *, uint8_t *);
 176 static void uslcom_start_read(struct ucom_softc *);
 177 static void uslcom_stop_read(struct ucom_softc *);
 178 static void uslcom_start_write(struct ucom_softc *);
 179 static void uslcom_stop_write(struct ucom_softc *);
 180 static void uslcom_poll(struct ucom_softc *ucom);
 181
 182 static const struct usb_config uslcom_config[USLCOM_N_TRANSFER] = {
 183
 184         [USLCOM_BULK_DT_WR] = {
 185                 .type = UE_BULK,
 186                 .endpoint = UE_ADDR_ANY,
 187                 .direction = UE_DIR_OUT,
 188                 .bufsize = USLCOM_BULK_BUF_SIZE,
 189                .flags = {.pipe_bof = 1,},
 190                 .callback = &uslcom_write_callback,
 191         },
 192
 193         [USLCOM_BULK_DT_RD] = {
 194                 .type = UE_BULK,
 195                 .endpoint = UE_ADDR_ANY,
 196                 .direction = UE_DIR_IN,
 197                 .bufsize = USLCOM_BULK_BUF_SIZE,
 198                 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
 199                 .callback = &uslcom_read_callback,
 200         },
 201         [USLCOM_CTRL_DT_RD] = {
 202                 .type = UE_CONTROL,
 203                 .endpoint = 0x00,
 204                 .direction = UE_DIR_ANY,
 205                 .bufsize = sizeof(struct usb_device_request) + 8,
 206                 .flags = {.pipe_bof = 1,},
 207                 .callback = &uslcom_control_callback,
 208                 .timeout = 1000,        /* 1 second timeout */
 209         },
 210 };
 211
 212 static struct ucom_callback uslcom_callback = {
 213         .ucom_cfg_open = &uslcom_open,
 214         .ucom_cfg_close = &uslcom_close,
 215         .ucom_cfg_get_status = &uslcom_get_status,
 216         .ucom_cfg_set_dtr = &uslcom_set_dtr,
 217         .ucom_cfg_set_rts = &uslcom_set_rts,
 218         .ucom_cfg_set_break = &uslcom_set_break,
 219         .ucom_ioctl = &uslcom_ioctl,
 220         .ucom_cfg_param = &uslcom_param,
 221         .ucom_pre_param = &uslcom_pre_param,
 222         .ucom_start_read = &uslcom_start_read,
 223         .ucom_stop_read = &uslcom_stop_read,
 224         .ucom_start_write = &uslcom_start_write,
 225         .ucom_stop_write = &uslcom_stop_write,
 226         .ucom_poll = &uslcom_poll,
 227         .ucom_free = &uslcom_free,
 228 };
 229
 230 static const STRUCT_USB_HOST_ID uslcom_devs[] = {
 231 #define USLCOM_DEV(v,p)  { USB_VP(USB_VENDOR_##v, USB_PRODUCT_##v##_##p) }
 232     USLCOM_DEV(BALTECH, CARDREADER),
 233     USLCOM_DEV(CLIPSAL, 5000CT2),
 234     USLCOM_DEV(CLIPSAL, 5500PACA),
 235     USLCOM_DEV(CLIPSAL, 5500PCU),
 236     USLCOM_DEV(CLIPSAL, 560884),
 237     USLCOM_DEV(CLIPSAL, 5800PC),
 238     USLCOM_DEV(CLIPSAL, C5000CT2),
 239     USLCOM_DEV(CLIPSAL, L51xx),
 240     USLCOM_DEV(DATAAPEX, MULTICOM),
 241     USLCOM_DEV(DELL, DW700),
 242     USLCOM_DEV(DIGIANSWER, ZIGBEE802154),
 243     USLCOM_DEV(DYNASTREAM, ANTDEVBOARD),
 244     USLCOM_DEV(DYNASTREAM, ANTDEVBOARD2),
 245     USLCOM_DEV(DYNASTREAM, ANT2USB),
 246     USLCOM_DEV(ELV, USBI2C),
 247     USLCOM_DEV(FESTO, CMSP),
 248     USLCOM_DEV(FESTO, CPX_USB),
 249     USLCOM_DEV(FOXCONN, PIRELLI_DP_L10),
 250     USLCOM_DEV(FOXCONN, TCOM_TC_300),
 251     USLCOM_DEV(GEMALTO, PROXPU),
 252     USLCOM_DEV(JABLOTRON, PC60B),
 253     USLCOM_DEV(KAMSTRUP, OPTICALEYE),
 254     USLCOM_DEV(KAMSTRUP, MBUS_250D),
 255     USLCOM_DEV(LAKESHORE, 121),
 256     USLCOM_DEV(LAKESHORE, 218A),
 257     USLCOM_DEV(LAKESHORE, 219),
 258     USLCOM_DEV(LAKESHORE, 233),
 259     USLCOM_DEV(LAKESHORE, 235),
 260     USLCOM_DEV(LAKESHORE, 335),
 261     USLCOM_DEV(LAKESHORE, 336),
 262     USLCOM_DEV(LAKESHORE, 350),
 263     USLCOM_DEV(LAKESHORE, 371),
 264     USLCOM_DEV(LAKESHORE, 411),
 265     USLCOM_DEV(LAKESHORE, 425),
 266     USLCOM_DEV(LAKESHORE, 455A),
 267     USLCOM_DEV(LAKESHORE, 465),
 268     USLCOM_DEV(LAKESHORE, 475A),
 269     USLCOM_DEV(LAKESHORE, 625A),
 270     USLCOM_DEV(LAKESHORE, 642A),
 271     USLCOM_DEV(LAKESHORE, 648),
 272     USLCOM_DEV(LAKESHORE, 737),
 273     USLCOM_DEV(LAKESHORE, 776),
 274     USLCOM_DEV(LINKINSTRUMENTS, MSO19),
 275     USLCOM_DEV(LINKINSTRUMENTS, MSO28),
 276     USLCOM_DEV(LINKINSTRUMENTS, MSO28_2),
 277     USLCOM_DEV(MEI, CASHFLOW_SC),
 278     USLCOM_DEV(MEI, S2000),
 279     USLCOM_DEV(NETGEAR, M4100),
 280     USLCOM_DEV(OWEN, AC4),
 281     USLCOM_DEV(OWL, CM_160),
 282     USLCOM_DEV(PHILIPS, ACE1001),
 283     USLCOM_DEV(PLX, CA42),
 284     USLCOM_DEV(RENESAS, RX610),
 285     USLCOM_DEV(SEL, C662),
 286     USLCOM_DEV(SILABS, AC_SERV_CAN),
 287     USLCOM_DEV(SILABS, AC_SERV_CIS),
 288     USLCOM_DEV(SILABS, AC_SERV_IBUS),
 289     USLCOM_DEV(SILABS, AC_SERV_OBD),
 290     USLCOM_DEV(SILABS, AEROCOMM),
 291     USLCOM_DEV(SILABS, AMBER_AMB2560),
 292     USLCOM_DEV(SILABS, ARGUSISP),
 293     USLCOM_DEV(SILABS, ARKHAM_DS101_A),
 294     USLCOM_DEV(SILABS, ARKHAM_DS101_M),
 295     USLCOM_DEV(SILABS, ARYGON_MIFARE),
 296     USLCOM_DEV(SILABS, AVIT_USB_TTL),
 297     USLCOM_DEV(SILABS, B_G_H3000),
 298     USLCOM_DEV(SILABS, BALLUFF_RFID),
 299     USLCOM_DEV(SILABS, BEI_VCP),
 300     USLCOM_DEV(SILABS, BSM7DUSB),
 301     USLCOM_DEV(SILABS, BURNSIDE),
 302     USLCOM_DEV(SILABS, C2_EDGE_MODEM),
 303     USLCOM_DEV(SILABS, CP2102),
 304     USLCOM_DEV(SILABS, CP210X_2),
 305     USLCOM_DEV(SILABS, CP210X_3),
 306     USLCOM_DEV(SILABS, CP210X_4),
 307     USLCOM_DEV(SILABS, CRUMB128),
 308     USLCOM_DEV(SILABS, CYGNAL),
 309     USLCOM_DEV(SILABS, CYGNAL_DEBUG),
 310     USLCOM_DEV(SILABS, CYGNAL_GPS),
 311     USLCOM_DEV(SILABS, DEGREE),
 312     USLCOM_DEV(SILABS, DEKTEK_DTAPLUS),
 313     USLCOM_DEV(SILABS, EMS_C1007),
 314     USLCOM_DEV(SILABS, HAMLINKUSB),
 315     USLCOM_DEV(SILABS, HELICOM),
 316     USLCOM_DEV(SILABS, HUBZ),
 317     USLCOM_DEV(SILABS, IMS_USB_RS422),
 318     USLCOM_DEV(SILABS, INFINITY_MIC),
 319     USLCOM_DEV(SILABS, INGENI_ZIGBEE),
 320     USLCOM_DEV(SILABS, INSYS_MODEM),
 321     USLCOM_DEV(SILABS, IRZ_SG10),
 322     USLCOM_DEV(SILABS, KYOCERA_GPS),
 323     USLCOM_DEV(SILABS, LIPOWSKY_HARP),
 324     USLCOM_DEV(SILABS, LIPOWSKY_JTAG),
 325     USLCOM_DEV(SILABS, LIPOWSKY_LIN),
 326     USLCOM_DEV(SILABS, MC35PU),
 327     USLCOM_DEV(SILABS, MMB_ZIGBEE),
 328     USLCOM_DEV(SILABS, MJS_TOSLINK),
 329     USLCOM_DEV(SILABS, MSD_DASHHAWK),
 330     USLCOM_DEV(SILABS, MULTIPLEX_RC),
 331     USLCOM_DEV(SILABS, OPTRIS_MSPRO),
 332     USLCOM_DEV(SILABS, POLOLU),
 333     USLCOM_DEV(SILABS, PROCYON_AVS),
 334     USLCOM_DEV(SILABS, SB_PARAMOUNT_ME),
 335     USLCOM_DEV(SILABS, SUUNTO),
 336     USLCOM_DEV(SILABS, TAMSMASTER),
 337     USLCOM_DEV(SILABS, TELEGESIS_ETRX2),
 338     USLCOM_DEV(SILABS, TRACIENT),
 339     USLCOM_DEV(SILABS, TRAQMATE),
 340     USLCOM_DEV(SILABS, USBCOUNT50),
 341     USLCOM_DEV(SILABS, USBPULSE100),
 342     USLCOM_DEV(SILABS, USBSCOPE50),
 343     USLCOM_DEV(SILABS, USBWAVE12),
 344     USLCOM_DEV(SILABS, V_PREON32),
 345     USLCOM_DEV(SILABS, VSTABI),
 346     USLCOM_DEV(SILABS, WAVIT),
 347     USLCOM_DEV(SILABS, WMRBATT),
 348     USLCOM_DEV(SILABS, WMRRIGBLASTER),
 349     USLCOM_DEV(SILABS, WMRRIGTALK),
 350     USLCOM_DEV(SILABS, ZEPHYR_BIO),
 351     USLCOM_DEV(SILABS2, DCU11CLONE),
 352     USLCOM_DEV(SILABS3, GPRS_MODEM),
 353     USLCOM_DEV(SILABS4, 100EU_MODEM),
 354     USLCOM_DEV(SYNTECH, CYPHERLAB100),
 355     USLCOM_DEV(USI, MC60),
 356     USLCOM_DEV(VAISALA, CABLE),
 357     USLCOM_DEV(WAGO, SERVICECABLE),
 358     USLCOM_DEV(WAVESENSE, JAZZ),
 359     USLCOM_DEV(WESTMOUNTAIN, RIGBLASTER_ADVANTAGE),
 360     USLCOM_DEV(WIENERPLEINBAUS, PL512),
 361     USLCOM_DEV(WIENERPLEINBAUS, RCM),
 362     USLCOM_DEV(WIENERPLEINBAUS, MPOD),
 363     USLCOM_DEV(WIENERPLEINBAUS, CML),
 364 #undef USLCOM_DEV
 365 };
 366
 367 static device_method_t uslcom_methods[] = {
 368         DEVMETHOD(device_probe, uslcom_probe),
 369         DEVMETHOD(device_attach, uslcom_attach),
 370         DEVMETHOD(device_detach, uslcom_detach),
 371         DEVMETHOD_END
 372 };
 373
 374 static devclass_t uslcom_devclass;
 375
 376 static driver_t uslcom_driver = {
 377         .name = "uslcom",
 378         .methods = uslcom_methods,
 379         .size = sizeof(struct uslcom_softc),
 380 };
 381
 382 DRIVER_MODULE(uslcom, uhub, uslcom_driver, uslcom_devclass, NULL, 0);
 383 MODULE_DEPEND(uslcom, ucom, 1, 1, 1);
 384 MODULE_DEPEND(uslcom, usb, 1, 1, 1);
 385 MODULE_VERSION(uslcom, 1);
 386 USB_PNP_HOST_INFO(uslcom_devs);
 387
 388 static void
 389 uslcom_watchdog(void *arg)
 390 {
 391         struct uslcom_softc *sc = arg;
 392
 393         mtx_assert(&sc->sc_mtx, MA_OWNED);
 394
 395         usbd_transfer_start(sc->sc_xfer[USLCOM_CTRL_DT_RD]);
 396
 397         usb_callout_reset(&sc->sc_watchdog,
 398             hz / 4, &uslcom_watchdog, sc);
 399 }
 400
 401 static int
 402 uslcom_probe(device_t dev)
 403 {
 404         struct usb_attach_arg *uaa = device_get_ivars(dev);
 405
 406         DPRINTFN(11, "\n");
 407
 408         if (uaa->usb_mode != USB_MODE_HOST) {
 409                 return (ENXIO);
 410         }
 411         if (uaa->info.bConfigIndex != USLCOM_CONFIG_INDEX) {
 412                 return (ENXIO);
 413         }
 414         return (usbd_lookup_id_by_uaa(uslcom_devs, sizeof(uslcom_devs), uaa));
 415 }
 416
 417 static int
 418 uslcom_attach(device_t dev)
 419 {
 420         struct usb_attach_arg *uaa = device_get_ivars(dev);
 421         struct uslcom_softc *sc = device_get_softc(dev);
 422         int error;
 423
 424         DPRINTFN(11, "\n");
 425
 426         device_set_usb_desc(dev);
 427         mtx_init(&sc->sc_mtx, "uslcom", NULL, MTX_DEF);
 428         ucom_ref(&sc->sc_super_ucom);
 429         usb_callout_init_mtx(&sc->sc_watchdog, &sc->sc_mtx, 0);
 430
 431         sc->sc_udev = uaa->device;
 432         /* use the interface number from the USB interface descriptor */
 433         sc->sc_iface_no = uaa->info.bIfaceNum;
 434
 435         error = usbd_transfer_setup(uaa->device,
 436             &uaa->info.bIfaceIndex, sc->sc_xfer, uslcom_config,
 437             USLCOM_N_TRANSFER, sc, &sc->sc_mtx);
 438         if (error) {
 439                 DPRINTF("one or more missing USB endpoints, "
 440                     "error=%s\n", usbd_errstr(error));
 441                 goto detach;
 442         }
 443         /* clear stall at first run */
 444         mtx_lock(&sc->sc_mtx);
 445         usbd_xfer_set_stall(sc->sc_xfer[USLCOM_BULK_DT_WR]);
 446         usbd_xfer_set_stall(sc->sc_xfer[USLCOM_BULK_DT_RD]);
 447         mtx_unlock(&sc->sc_mtx);
 448
 449         sc->sc_partnum = uslcom_get_partnum(sc);
 450
 451         error = ucom_attach(&sc->sc_super_ucom, &sc->sc_ucom, 1, sc,
 452             &uslcom_callback, &sc->sc_mtx);
 453         if (error) {
 454                 goto detach;
 455         }
 456         ucom_set_pnpinfo_usb(&sc->sc_super_ucom, dev);
 457
 458         return (0);
 459
 460 detach:
 461         uslcom_detach(dev);
 462         return (ENXIO);
 463 }
 464
 465 static int
 466 uslcom_detach(device_t dev)
 467 {
 468         struct uslcom_softc *sc = device_get_softc(dev);
 469
 470         DPRINTF("sc=%p\n", sc);
 471
 472         ucom_detach(&sc->sc_super_ucom, &sc->sc_ucom);
 473         usbd_transfer_unsetup(sc->sc_xfer, USLCOM_N_TRANSFER);
 474
 475         usb_callout_drain(&sc->sc_watchdog);
 476
 477         device_claim_softc(dev);
 478
 479         uslcom_free_softc(sc);
 480
 481         return (0);
 482 }
 483
 484 UCOM_UNLOAD_DRAIN(uslcom);
 485
 486 static void
 487 uslcom_free_softc(struct uslcom_softc *sc)
 488 {
 489         if (ucom_unref(&sc->sc_super_ucom)) {
 490                 mtx_destroy(&sc->sc_mtx);
 491                 device_free_softc(sc);
 492         }
 493 }
 494
 495 static void
 496 uslcom_free(struct ucom_softc *ucom)
 497 {
 498         uslcom_free_softc(ucom->sc_parent);
 499 }
 500
 501 static void
 502 uslcom_open(struct ucom_softc *ucom)
 503 {
 504         struct uslcom_softc *sc = ucom->sc_parent;
 505         struct usb_device_request req;
 506
 507         req.bmRequestType = USLCOM_WRITE;
 508         req.bRequest = USLCOM_IFC_ENABLE;
 509         USETW(req.wValue, USLCOM_IFC_ENABLE_EN);
 510         USETW(req.wIndex, sc->sc_iface_no);
 511         USETW(req.wLength, 0);
 512
 513         if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 514             &req, NULL, 0, 1000)) {
 515                 DPRINTF("UART enable failed (ignored)\n");
 516         }
 517
 518         /* start polling status */
 519         uslcom_watchdog(sc);
 520 }
 521
 522 static void
 523 uslcom_close(struct ucom_softc *ucom)
 524 {
 525         struct uslcom_softc *sc = ucom->sc_parent;
 526         struct usb_device_request req;
 527
 528         /* stop polling status */
 529         usb_callout_stop(&sc->sc_watchdog);
 530
 531         req.bmRequestType = USLCOM_WRITE;
 532         req.bRequest = USLCOM_IFC_ENABLE;
 533         USETW(req.wValue, USLCOM_IFC_ENABLE_DIS);
 534         USETW(req.wIndex, sc->sc_iface_no);
 535         USETW(req.wLength, 0);
 536
 537         if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 538             &req, NULL, 0, 1000)) {
 539                 DPRINTF("UART disable failed (ignored)\n");
 540         }
 541 }
 542
 543 static uint8_t
 544 uslcom_get_partnum(struct uslcom_softc *sc)
 545 {
 546         struct usb_device_request req;
 547         uint8_t partnum;
 548
 549         /* Find specific chip type */
 550         partnum = 0;
 551         req.bmRequestType = USLCOM_READ;
 552         req.bRequest = USLCOM_VENDOR_SPECIFIC;
 553         USETW(req.wValue, USLCOM_GET_PARTNUM);
 554         USETW(req.wIndex, sc->sc_iface_no);
 555         USETW(req.wLength, sizeof(partnum));
 556
 557         if (usbd_do_request_flags(sc->sc_udev, NULL,
 558             &req, &partnum, 0, NULL, 1000)) {
 559                 DPRINTF("GET_PARTNUM failed\n");
 560         }
 561
 562         return(partnum);
 563 }
 564
 565 static void
 566 uslcom_set_dtr(struct ucom_softc *ucom, uint8_t onoff)
 567 {
 568         struct uslcom_softc *sc = ucom->sc_parent;
 569         struct usb_device_request req;
 570         uint16_t ctl;
 571
 572         DPRINTF("onoff = %d\n", onoff);
 573
 574         ctl = onoff ? USLCOM_MHS_DTR_ON : 0;
 575         ctl |= USLCOM_MHS_DTR_SET;
 576
 577         req.bmRequestType = USLCOM_WRITE;
 578         req.bRequest = USLCOM_SET_MHS;
 579         USETW(req.wValue, ctl);
 580         USETW(req.wIndex, sc->sc_iface_no);
 581         USETW(req.wLength, 0);
 582
 583         if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 584             &req, NULL, 0, 1000)) {
 585                 DPRINTF("Setting DTR failed (ignored)\n");
 586         }
 587 }
 588
 589 static void
 590 uslcom_set_rts(struct ucom_softc *ucom, uint8_t onoff)
 591 {
 592         struct uslcom_softc *sc = ucom->sc_parent;
 593         struct usb_device_request req;
 594         uint16_t ctl;
 595
 596         DPRINTF("onoff = %d\n", onoff);
 597
 598         ctl = onoff ? USLCOM_MHS_RTS_ON : 0;
 599         ctl |= USLCOM_MHS_RTS_SET;
 600
 601         req.bmRequestType = USLCOM_WRITE;
 602         req.bRequest = USLCOM_SET_MHS;
 603         USETW(req.wValue, ctl);
 604         USETW(req.wIndex, sc->sc_iface_no);
 605         USETW(req.wLength, 0);
 606
 607         if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 608             &req, NULL, 0, 1000)) {
 609                 DPRINTF("Setting DTR failed (ignored)\n");
 610         }
 611 }
 612
 613 static int
 614 uslcom_pre_param(struct ucom_softc *ucom, struct termios *t)
 615 {
 616         if (t->c_ospeed <= 0 || t->c_ospeed > 921600)
 617                 return (EINVAL);
 618         return (0);
 619 }
 620
 621 static void
 622 uslcom_param(struct ucom_softc *ucom, struct termios *t)
 623 {
 624         struct uslcom_softc *sc = ucom->sc_parent;
 625         struct usb_device_request req;
 626         uint32_t baudrate, flowctrl[4];
 627         uint16_t data;
 628
 629         DPRINTF("\n");
 630
 631         baudrate = t->c_ospeed;
 632         req.bmRequestType = USLCOM_WRITE;
 633         req.bRequest = USLCOM_SET_BAUDRATE;
 634         USETW(req.wValue, 0);
 635         USETW(req.wIndex, sc->sc_iface_no);
 636         USETW(req.wLength, sizeof(baudrate));
 637
 638         if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 639             &req, &baudrate, 0, 1000)) {
 640                 DPRINTF("Set baudrate failed (ignored)\n");
 641         }
 642
 643         if (t->c_cflag & CSTOPB)
 644                 data = USLCOM_STOP_BITS_2;
 645         else
 646                 data = USLCOM_STOP_BITS_1;
 647         if (t->c_cflag & PARENB) {
 648                 if (t->c_cflag & PARODD)
 649                         data |= USLCOM_PARITY_ODD;
 650                 else
 651                         data |= USLCOM_PARITY_EVEN;
 652         } else
 653                 data |= USLCOM_PARITY_NONE;
 654         switch (t->c_cflag & CSIZE) {
 655         case CS5:
 656                 data |= USLCOM_SET_DATA_BITS(5);
 657                 break;
 658         case CS6:
 659                 data |= USLCOM_SET_DATA_BITS(6);
 660                 break;
 661         case CS7:
 662                 data |= USLCOM_SET_DATA_BITS(7);
 663                 break;
 664         case CS8:
 665                 data |= USLCOM_SET_DATA_BITS(8);
 666                 break;
 667         }
 668
 669         req.bmRequestType = USLCOM_WRITE;
 670         req.bRequest = USLCOM_SET_LINE_CTL;
 671         USETW(req.wValue, data);
 672         USETW(req.wIndex, sc->sc_iface_no);
 673         USETW(req.wLength, 0);
 674
 675         if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 676             &req, NULL, 0, 1000)) {
 677                 DPRINTF("Set format failed (ignored)\n");
 678         }
 679
 680         if (t->c_cflag & CRTSCTS) {
 681                 flowctrl[0] = htole32(USLCOM_FLOW_DTR_ON | USLCOM_FLOW_CTS_HS);
 682                 flowctrl[1] = htole32(USLCOM_FLOW_RTS_HS);
 683         } else {
 684                 flowctrl[0] = htole32(USLCOM_FLOW_DTR_ON);
 685                 flowctrl[1] = htole32(USLCOM_FLOW_RTS_ON);
 686         }
 687         flowctrl[2] = 0;
 688         flowctrl[3] = 0;
 689         req.bmRequestType = USLCOM_WRITE;
 690         req.bRequest = USLCOM_SET_FLOW;
 691         USETW(req.wValue, 0);
 692         USETW(req.wIndex, sc->sc_iface_no);
 693         USETW(req.wLength, sizeof(flowctrl));
 694
 695         if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 696             &req, flowctrl, 0, 1000)) {
 697                 DPRINTF("Set flowcontrol failed (ignored)\n");
 698         }
 699 }
 700
 701 static void
 702 uslcom_get_status(struct ucom_softc *ucom, uint8_t *lsr, uint8_t *msr)
 703 {
 704         struct uslcom_softc *sc = ucom->sc_parent;
 705
 706         DPRINTF("\n");
 707
 708         /* XXX Note: sc_lsr is always zero */
 709         *lsr = sc->sc_lsr;
 710         *msr = sc->sc_msr;
 711 }
 712
 713 static void
 714 uslcom_set_break(struct ucom_softc *ucom, uint8_t onoff)
 715 {
 716         struct uslcom_softc *sc = ucom->sc_parent;
 717         struct usb_device_request req;
 718         uint16_t brk = onoff ? USLCOM_SET_BREAK_ON : USLCOM_SET_BREAK_OFF;
 719
 720         req.bmRequestType = USLCOM_WRITE;
 721         req.bRequest = USLCOM_SET_BREAK;
 722         USETW(req.wValue, brk);
 723         USETW(req.wIndex, sc->sc_iface_no);
 724         USETW(req.wLength, 0);
 725
 726         if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 727             &req, NULL, 0, 1000)) {
 728                 DPRINTF("Set BREAK failed (ignored)\n");
 729         }
 730 }
 731
 732 static int
 733 uslcom_ioctl(struct ucom_softc *ucom, uint32_t cmd, caddr_t data,
 734     int flag, struct thread *td)
 735 {
 736         struct uslcom_softc *sc = ucom->sc_parent;
 737         struct usb_device_request req;
 738         int error = 0;
 739         uint8_t latch;
 740
 741         DPRINTF("cmd=0x%08x\n", cmd);
 742
 743         switch (cmd) {
 744         case USB_GET_GPIO:
 745                 if (sc->sc_partnum < USLCOM_PARTNUM_CP2103) {
 746                         error = ENODEV;
 747                         break;
 748                 }
 749                 req.bmRequestType = USLCOM_READ;
 750                 req.bRequest = USLCOM_VENDOR_SPECIFIC;
 751                 USETW(req.wValue, USLCOM_READ_LATCH);
 752                 USETW(req.wIndex, sc->sc_iface_no);
 753                 USETW(req.wLength, sizeof(latch));
 754
 755                 if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 756                     &req, &latch, 0, 1000)) {
 757                         DPRINTF("Get LATCH failed\n");
 758                         error = EIO;
 759                 }
 760                 *(int *)data = latch;
 761                 break;
 762
 763         case USB_SET_GPIO:
 764                 if (sc->sc_partnum < USLCOM_PARTNUM_CP2103)
 765                         error = ENODEV;
 766                 else if ((sc->sc_partnum == USLCOM_PARTNUM_CP2103) ||
 767                     (sc->sc_partnum == USLCOM_PARTNUM_CP2104)) {
 768                         req.bmRequestType = USLCOM_WRITE;
 769                         req.bRequest = USLCOM_VENDOR_SPECIFIC;
 770                         USETW(req.wValue, USLCOM_WRITE_LATCH);
 771                         USETW(req.wIndex, (*(int *)data));
 772                         USETW(req.wLength, 0);
 773
 774                         if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 775                             &req, NULL, 0, 1000)) {
 776                                 DPRINTF("Set LATCH failed\n");
 777                                 error = EIO;
 778                         }
 779                 } else
 780                         error = ENODEV; /* Not yet */
 781                 break;
 782
 783         default:
 784                 DPRINTF("Unknown IOCTL\n");
 785                 error = ENOIOCTL;
 786                 break;
 787         }
 788         return (error);
 789 }
 790
 791 static void
 792 uslcom_write_callback(struct usb_xfer *xfer, usb_error_t error)
 793 {
 794         struct uslcom_softc *sc = usbd_xfer_softc(xfer);
 795         struct usb_page_cache *pc;
 796         uint32_t actlen;
 797
 798         switch (USB_GET_STATE(xfer)) {
 799         case USB_ST_SETUP:
 800         case USB_ST_TRANSFERRED:
 801 tr_setup:
 802                 pc = usbd_xfer_get_frame(xfer, 0);
 803                 if (ucom_get_data(&sc->sc_ucom, pc, 0,
 804                     USLCOM_BULK_BUF_SIZE, &actlen)) {
 805
 806                         DPRINTF("actlen = %d\n", actlen);
 807
 808                         usbd_xfer_set_frame_len(xfer, 0, actlen);
 809                         usbd_transfer_submit(xfer);
 810                 }
 811                 return;
 812
 813         default:                        /* Error */
 814                 if (error != USB_ERR_CANCELLED) {
 815                         /* try to clear stall first */
 816                         usbd_xfer_set_stall(xfer);
 817                         goto tr_setup;
 818                 }
 819                 return;
 820         }
 821 }
 822
 823 static void
 824 uslcom_read_callback(struct usb_xfer *xfer, usb_error_t error)
 825 {
 826         struct uslcom_softc *sc = usbd_xfer_softc(xfer);
 827         struct usb_page_cache *pc;
 828         int actlen;
 829
 830         usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
 831
 832         switch (USB_GET_STATE(xfer)) {
 833         case USB_ST_TRANSFERRED:
 834                 pc = usbd_xfer_get_frame(xfer, 0);
 835                 ucom_put_data(&sc->sc_ucom, pc, 0, actlen);
 836
 837         case USB_ST_SETUP:
 838 tr_setup:
 839                 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
 840                 usbd_transfer_submit(xfer);
 841                 return;
 842
 843         default:                        /* Error */
 844                 if (error != USB_ERR_CANCELLED) {
 845                         /* try to clear stall first */
 846                         usbd_xfer_set_stall(xfer);
 847                         goto tr_setup;
 848                 }
 849                 return;
 850         }
 851 }
 852
 853 static void
 854 uslcom_control_callback(struct usb_xfer *xfer, usb_error_t error)
 855 {
 856         struct uslcom_softc *sc = usbd_xfer_softc(xfer);
 857         struct usb_page_cache *pc;
 858         struct usb_device_request req;
 859         uint8_t msr = 0;
 860         uint8_t buf;
 861
 862         switch (USB_GET_STATE(xfer)) {
 863         case USB_ST_TRANSFERRED:
 864                 pc = usbd_xfer_get_frame(xfer, 1);
 865                 usbd_copy_out(pc, 0, &buf, sizeof(buf));
 866                 if (buf & USLCOM_MHS_CTS)
 867                         msr |= SER_CTS;
 868                 if (buf & USLCOM_MHS_DSR)
 869                         msr |= SER_DSR;
 870                 if (buf & USLCOM_MHS_RI)
 871                         msr |= SER_RI;
 872                 if (buf & USLCOM_MHS_DCD)
 873                         msr |= SER_DCD;
 874
 875                 if (msr != sc->sc_msr) {
 876                         DPRINTF("status change msr=0x%02x "
 877                             "(was 0x%02x)\n", msr, sc->sc_msr);
 878                         sc->sc_msr = msr;
 879                         ucom_status_change(&sc->sc_ucom);
 880                 }
 881                 break;
 882
 883         case USB_ST_SETUP:
 884                 req.bmRequestType = USLCOM_READ;
 885                 req.bRequest = USLCOM_GET_MDMSTS;
 886                 USETW(req.wValue, 0);
 887                 USETW(req.wIndex, sc->sc_iface_no);
 888                 USETW(req.wLength, sizeof(buf));
 889
 890                 usbd_xfer_set_frames(xfer, 2);
 891                 usbd_xfer_set_frame_len(xfer, 0, sizeof(req));
 892                 usbd_xfer_set_frame_len(xfer, 1, sizeof(buf));
 893
 894                 pc = usbd_xfer_get_frame(xfer, 0);
 895                 usbd_copy_in(pc, 0, &req, sizeof(req));
 896                 usbd_transfer_submit(xfer);
 897                 break;
 898
 899         default:                /* error */
 900                 if (error != USB_ERR_CANCELLED)
 901                         DPRINTF("error=%s\n", usbd_errstr(error));
 902                 break;
 903         }
 904 }
 905
 906 static void
 907 uslcom_start_read(struct ucom_softc *ucom)
 908 {
 909         struct uslcom_softc *sc = ucom->sc_parent;
 910
 911         /* start read endpoint */
 912         usbd_transfer_start(sc->sc_xfer[USLCOM_BULK_DT_RD]);
 913 }
 914
 915 static void
 916 uslcom_stop_read(struct ucom_softc *ucom)
 917 {
 918         struct uslcom_softc *sc = ucom->sc_parent;
 919
 920         /* stop read endpoint */
 921         usbd_transfer_stop(sc->sc_xfer[USLCOM_BULK_DT_RD]);
 922 }
 923
 924 static void
 925 uslcom_start_write(struct ucom_softc *ucom)
 926 {
 927         struct uslcom_softc *sc = ucom->sc_parent;
 928
 929         usbd_transfer_start(sc->sc_xfer[USLCOM_BULK_DT_WR]);
 930 }
 931
 932 static void
 933 uslcom_stop_write(struct ucom_softc *ucom)
 934 {
 935         struct uslcom_softc *sc = ucom->sc_parent;
 936
 937         usbd_transfer_stop(sc->sc_xfer[USLCOM_BULK_DT_WR]);
 938 }
 939
 940 static void
 941 uslcom_poll(struct ucom_softc *ucom)
 942 {
 943         struct uslcom_softc *sc = ucom->sc_parent;
 944         usbd_transfer_poll(sc->sc_xfer, USLCOM_N_TRANSFER);
 945 }