3 * Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 #ifdef USB_GLOBAL_INCLUDE_FILE
28 #include USB_GLOBAL_INCLUDE_FILE
30 #include <sys/stdint.h>
31 #include <sys/stddef.h>
32 #include <sys/param.h>
33 #include <sys/queue.h>
34 #include <sys/types.h>
35 #include <sys/systm.h>
36 #include <sys/kernel.h>
38 #include <sys/module.h>
40 #include <sys/mutex.h>
41 #include <sys/condvar.h>
42 #include <sys/sysctl.h>
44 #include <sys/unistd.h>
45 #include <sys/callout.h>
46 #include <sys/malloc.h>
49 #include <dev/usb/usb.h>
50 #include <dev/usb/usbdi.h>
51 #include <dev/usb/usbdi_util.h>
53 #define USB_DEBUG_VAR usb_debug
55 #include <dev/usb/usb_core.h>
56 #include <dev/usb/usb_busdma.h>
57 #include <dev/usb/usb_process.h>
58 #include <dev/usb/usb_transfer.h>
59 #include <dev/usb/usb_device.h>
60 #include <dev/usb/usb_util.h>
61 #include <dev/usb/usb_debug.h>
63 #include <dev/usb/usb_controller.h>
64 #include <dev/usb/usb_bus.h>
65 #endif /* USB_GLOBAL_INCLUDE_FILE */
68 static void usb_dma_tag_create(struct usb_dma_tag *, usb_size_t, usb_size_t);
69 static void usb_dma_tag_destroy(struct usb_dma_tag *);
70 static void usb_dma_lock_cb(void *, bus_dma_lock_op_t);
71 static void usb_pc_alloc_mem_cb(void *, bus_dma_segment_t *, int, int);
72 static void usb_pc_load_mem_cb(void *, bus_dma_segment_t *, int, int);
73 static void usb_pc_common_mem_cb(void *, bus_dma_segment_t *, int, int,
77 /*------------------------------------------------------------------------*
78 * usbd_get_page - lookup DMA-able memory for the given offset
80 * NOTE: Only call this function when the "page_cache" structure has
81 * been properly initialized !
82 *------------------------------------------------------------------------*/
84 usbd_get_page(struct usb_page_cache *pc, usb_frlength_t offset,
85 struct usb_page_search *res)
88 struct usb_page *page;
92 /* Case 1 - something has been loaded into DMA */
96 /* Case 1a - Kernel Virtual Address */
98 res->buffer = USB_ADD_BYTES(pc->buffer, offset);
100 offset += pc->page_offset_buf;
102 /* compute destination page */
104 page = pc->page_start;
106 if (pc->ismultiseg) {
108 page += (offset / USB_PAGE_SIZE);
110 offset %= USB_PAGE_SIZE;
112 res->length = USB_PAGE_SIZE - offset;
113 res->physaddr = page->physaddr + offset;
115 res->length = (usb_size_t)-1;
116 res->physaddr = page->physaddr + offset;
120 /* Case 1b - Non Kernel Virtual Address */
122 res->buffer = USB_ADD_BYTES(page->buffer, offset);
127 /* Case 2 - Plain PIO */
129 res->buffer = USB_ADD_BYTES(pc->buffer, offset);
130 res->length = (usb_size_t)-1;
136 /*------------------------------------------------------------------------*
137 * usbd_copy_in - copy directly to DMA-able memory
138 *------------------------------------------------------------------------*/
140 usbd_copy_in(struct usb_page_cache *cache, usb_frlength_t offset,
141 const void *ptr, usb_frlength_t len)
143 struct usb_page_search buf_res;
147 usbd_get_page(cache, offset, &buf_res);
149 if (buf_res.length > len) {
150 buf_res.length = len;
152 memcpy(buf_res.buffer, ptr, buf_res.length);
154 offset += buf_res.length;
155 len -= buf_res.length;
156 ptr = USB_ADD_BYTES(ptr, buf_res.length);
160 /*------------------------------------------------------------------------*
161 * usbd_copy_in_user - copy directly to DMA-able memory from userland
166 *------------------------------------------------------------------------*/
169 usbd_copy_in_user(struct usb_page_cache *cache, usb_frlength_t offset,
170 const void *ptr, usb_frlength_t len)
172 struct usb_page_search buf_res;
177 usbd_get_page(cache, offset, &buf_res);
179 if (buf_res.length > len) {
180 buf_res.length = len;
182 error = copyin(ptr, buf_res.buffer, buf_res.length);
186 offset += buf_res.length;
187 len -= buf_res.length;
188 ptr = USB_ADD_BYTES(ptr, buf_res.length);
190 return (0); /* success */
194 /*------------------------------------------------------------------------*
195 * usbd_m_copy_in - copy a mbuf chain directly into DMA-able memory
196 *------------------------------------------------------------------------*/
198 struct usb_m_copy_in_arg {
199 struct usb_page_cache *cache;
200 usb_frlength_t dst_offset;
204 usbd_m_copy_in_cb(void *arg, void *src, uint32_t count)
206 register struct usb_m_copy_in_arg *ua = arg;
208 usbd_copy_in(ua->cache, ua->dst_offset, src, count);
209 ua->dst_offset += count;
214 usbd_m_copy_in(struct usb_page_cache *cache, usb_frlength_t dst_offset,
215 struct mbuf *m, usb_size_t src_offset, usb_frlength_t src_len)
217 struct usb_m_copy_in_arg arg = {cache, dst_offset};
218 (void) m_apply(m, src_offset, src_len, &usbd_m_copy_in_cb, &arg);
222 /*------------------------------------------------------------------------*
223 * usb_uiomove - factored out code
224 *------------------------------------------------------------------------*/
227 usb_uiomove(struct usb_page_cache *pc, struct uio *uio,
228 usb_frlength_t pc_offset, usb_frlength_t len)
230 struct usb_page_search res;
235 usbd_get_page(pc, pc_offset, &res);
237 if (res.length > len) {
241 * "uiomove()" can sleep so one needs to make a wrapper,
242 * exiting the mutex and checking things
244 error = uiomove(res.buffer, res.length, uio);
249 pc_offset += res.length;
256 /*------------------------------------------------------------------------*
257 * usbd_copy_out - copy directly from DMA-able memory
258 *------------------------------------------------------------------------*/
260 usbd_copy_out(struct usb_page_cache *cache, usb_frlength_t offset,
261 void *ptr, usb_frlength_t len)
263 struct usb_page_search res;
267 usbd_get_page(cache, offset, &res);
269 if (res.length > len) {
272 memcpy(ptr, res.buffer, res.length);
274 offset += res.length;
276 ptr = USB_ADD_BYTES(ptr, res.length);
280 /*------------------------------------------------------------------------*
281 * usbd_copy_out_user - copy directly from DMA-able memory to userland
286 *------------------------------------------------------------------------*/
289 usbd_copy_out_user(struct usb_page_cache *cache, usb_frlength_t offset,
290 void *ptr, usb_frlength_t len)
292 struct usb_page_search res;
297 usbd_get_page(cache, offset, &res);
299 if (res.length > len) {
302 error = copyout(res.buffer, ptr, res.length);
306 offset += res.length;
308 ptr = USB_ADD_BYTES(ptr, res.length);
310 return (0); /* success */
314 /*------------------------------------------------------------------------*
315 * usbd_frame_zero - zero DMA-able memory
316 *------------------------------------------------------------------------*/
318 usbd_frame_zero(struct usb_page_cache *cache, usb_frlength_t offset,
321 struct usb_page_search res;
325 usbd_get_page(cache, offset, &res);
327 if (res.length > len) {
330 memset(res.buffer, 0, res.length);
332 offset += res.length;
339 /*------------------------------------------------------------------------*
340 * usb_dma_lock_cb - dummy callback
341 *------------------------------------------------------------------------*/
343 usb_dma_lock_cb(void *arg, bus_dma_lock_op_t op)
345 /* we use "mtx_owned()" instead of this function */
348 /*------------------------------------------------------------------------*
349 * usb_dma_tag_create - allocate a DMA tag
351 * NOTE: If the "align" parameter has a value of 1 the DMA-tag will
352 * allow multi-segment mappings. Else all mappings are single-segment.
353 *------------------------------------------------------------------------*/
355 usb_dma_tag_create(struct usb_dma_tag *udt,
356 usb_size_t size, usb_size_t align)
360 if (bus_dma_tag_create
361 ( /* parent */ udt->tag_parent->tag,
362 /* alignment */ align,
364 /* lowaddr */ (2ULL << (udt->tag_parent->dma_bits - 1)) - 1,
365 /* highaddr */ BUS_SPACE_MAXADDR,
367 /* filterarg */ NULL,
369 /* nsegments */ (align == 1 && size > 1) ?
370 (2 + (size / USB_PAGE_SIZE)) : 1,
371 /* maxsegsz */ (align == 1 && size > USB_PAGE_SIZE) ?
372 USB_PAGE_SIZE : size,
373 /* flags */ BUS_DMA_KEEP_PG_OFFSET,
374 /* lockfn */ &usb_dma_lock_cb,
382 /*------------------------------------------------------------------------*
383 * usb_dma_tag_free - free a DMA tag
384 *------------------------------------------------------------------------*/
386 usb_dma_tag_destroy(struct usb_dma_tag *udt)
388 bus_dma_tag_destroy(udt->tag);
391 /*------------------------------------------------------------------------*
392 * usb_pc_alloc_mem_cb - BUS-DMA callback function
393 *------------------------------------------------------------------------*/
395 usb_pc_alloc_mem_cb(void *arg, bus_dma_segment_t *segs,
398 usb_pc_common_mem_cb(arg, segs, nseg, error, 0);
401 /*------------------------------------------------------------------------*
402 * usb_pc_load_mem_cb - BUS-DMA callback function
403 *------------------------------------------------------------------------*/
405 usb_pc_load_mem_cb(void *arg, bus_dma_segment_t *segs,
408 usb_pc_common_mem_cb(arg, segs, nseg, error, 1);
411 /*------------------------------------------------------------------------*
412 * usb_pc_common_mem_cb - BUS-DMA callback function
413 *------------------------------------------------------------------------*/
415 usb_pc_common_mem_cb(void *arg, bus_dma_segment_t *segs,
416 int nseg, int error, uint8_t isload)
418 struct usb_dma_parent_tag *uptag;
419 struct usb_page_cache *pc;
426 uptag = pc->tag_parent;
429 * XXX There is sometimes recursive locking here.
430 * XXX We should try to find a better solution.
431 * XXX Until further the "owned" variable does
441 pg->physaddr = segs->ds_addr & ~(USB_PAGE_SIZE - 1);
442 rem = segs->ds_addr & (USB_PAGE_SIZE - 1);
443 pc->page_offset_buf = rem;
444 pc->page_offset_end += rem;
446 if (rem != (USB_P2U(pc->buffer) & (USB_PAGE_SIZE - 1))) {
448 * This check verifies that the physical address is correct:
450 DPRINTFN(0, "Page offset was not preserved\n");
455 while (pc->ismultiseg) {
456 off += USB_PAGE_SIZE;
457 if (off >= (segs->ds_len + rem)) {
467 pg->physaddr = (segs->ds_addr + off) & ~(USB_PAGE_SIZE - 1);
471 owned = mtx_owned(uptag->mtx);
473 mtx_lock(uptag->mtx);
475 uptag->dma_error = (error ? 1 : 0);
477 (uptag->func) (uptag);
479 cv_broadcast(uptag->cv);
482 mtx_unlock(uptag->mtx);
485 /*------------------------------------------------------------------------*
486 * usb_pc_alloc_mem - allocate DMA'able memory
491 *------------------------------------------------------------------------*/
493 usb_pc_alloc_mem(struct usb_page_cache *pc, struct usb_page *pg,
494 usb_size_t size, usb_size_t align)
496 struct usb_dma_parent_tag *uptag;
497 struct usb_dma_tag *utag;
502 uptag = pc->tag_parent;
506 * The alignment must be greater or equal to the
507 * "size" else the object can be split between two
508 * memory pages and we get a problem!
510 while (align < size) {
518 * XXX BUS-DMA workaround - FIXME later:
520 * We assume that that the aligment at this point of
521 * the code is greater than or equal to the size and
522 * less than two times the size, so that if we double
523 * the size, the size will be greater than the
526 * The bus-dma system has a check for "alignment"
527 * being less than "size". If that check fails we end
528 * up using contigmalloc which is page based even for
529 * small allocations. Try to avoid that to save
530 * memory, hence we sometimes to a large number of
533 if (size <= (USB_PAGE_SIZE / 2)) {
538 /* get the correct DMA tag */
539 utag = usb_dma_tag_find(uptag, size, align);
543 /* allocate memory */
544 if (bus_dmamem_alloc(
545 utag->tag, &ptr, (BUS_DMA_WAITOK | BUS_DMA_COHERENT), &map)) {
548 /* setup page cache */
551 pc->page_offset_buf = 0;
552 pc->page_offset_end = size;
555 pc->ismultiseg = (align == 1);
557 mtx_lock(uptag->mtx);
559 /* load memory into DMA */
560 err = bus_dmamap_load(
561 utag->tag, map, ptr, size, &usb_pc_alloc_mem_cb,
562 pc, (BUS_DMA_WAITOK | BUS_DMA_COHERENT));
564 if (err == EINPROGRESS) {
565 cv_wait(uptag->cv, uptag->mtx);
568 mtx_unlock(uptag->mtx);
570 if (err || uptag->dma_error) {
571 bus_dmamem_free(utag->tag, ptr, map);
574 memset(ptr, 0, size);
576 usb_pc_cpu_flush(pc);
581 /* reset most of the page cache */
583 pc->page_start = NULL;
584 pc->page_offset_buf = 0;
585 pc->page_offset_end = 0;
591 /*------------------------------------------------------------------------*
592 * usb_pc_free_mem - free DMA memory
594 * This function is NULL safe.
595 *------------------------------------------------------------------------*/
597 usb_pc_free_mem(struct usb_page_cache *pc)
599 if (pc && pc->buffer) {
601 bus_dmamap_unload(pc->tag, pc->map);
603 bus_dmamem_free(pc->tag, pc->buffer, pc->map);
609 /*------------------------------------------------------------------------*
610 * usb_pc_load_mem - load virtual memory into DMA
615 *------------------------------------------------------------------------*/
617 usb_pc_load_mem(struct usb_page_cache *pc, usb_size_t size, uint8_t sync)
619 /* setup page cache */
620 pc->page_offset_buf = 0;
621 pc->page_offset_end = size;
624 mtx_assert(pc->tag_parent->mtx, MA_OWNED);
628 struct usb_dma_parent_tag *uptag;
631 uptag = pc->tag_parent;
634 * We have to unload the previous loaded DMA
635 * pages before trying to load a new one!
637 bus_dmamap_unload(pc->tag, pc->map);
640 * Try to load memory into DMA.
642 err = bus_dmamap_load(
643 pc->tag, pc->map, pc->buffer, size,
644 &usb_pc_alloc_mem_cb, pc, BUS_DMA_WAITOK);
645 if (err == EINPROGRESS) {
646 cv_wait(uptag->cv, uptag->mtx);
649 if (err || uptag->dma_error) {
655 * We have to unload the previous loaded DMA
656 * pages before trying to load a new one!
658 bus_dmamap_unload(pc->tag, pc->map);
661 * Try to load memory into DMA. The callback
662 * will be called in all cases:
665 pc->tag, pc->map, pc->buffer, size,
666 &usb_pc_load_mem_cb, pc, BUS_DMA_WAITOK)) {
672 * Call callback so that refcount is decremented
675 pc->tag_parent->dma_error = 0;
676 (pc->tag_parent->func) (pc->tag_parent);
682 /*------------------------------------------------------------------------*
683 * usb_pc_cpu_invalidate - invalidate CPU cache
684 *------------------------------------------------------------------------*/
686 usb_pc_cpu_invalidate(struct usb_page_cache *pc)
688 if (pc->page_offset_end == pc->page_offset_buf) {
689 /* nothing has been loaded into this page cache! */
694 * TODO: We currently do XXX_POSTREAD and XXX_PREREAD at the
695 * same time, but in the future we should try to isolate the
696 * different cases to optimise the code. --HPS
698 bus_dmamap_sync(pc->tag, pc->map, BUS_DMASYNC_POSTREAD);
699 bus_dmamap_sync(pc->tag, pc->map, BUS_DMASYNC_PREREAD);
702 /*------------------------------------------------------------------------*
703 * usb_pc_cpu_flush - flush CPU cache
704 *------------------------------------------------------------------------*/
706 usb_pc_cpu_flush(struct usb_page_cache *pc)
708 if (pc->page_offset_end == pc->page_offset_buf) {
709 /* nothing has been loaded into this page cache! */
712 bus_dmamap_sync(pc->tag, pc->map, BUS_DMASYNC_PREWRITE);
715 /*------------------------------------------------------------------------*
716 * usb_pc_dmamap_create - create a DMA map
721 *------------------------------------------------------------------------*/
723 usb_pc_dmamap_create(struct usb_page_cache *pc, usb_size_t size)
725 struct usb_xfer_root *info;
726 struct usb_dma_tag *utag;
729 info = USB_DMATAG_TO_XROOT(pc->tag_parent);
735 utag = usb_dma_tag_find(pc->tag_parent, size, 1);
740 if (bus_dmamap_create(utag->tag, 0, &pc->map)) {
744 return 0; /* success */
749 return 1; /* failure */
752 /*------------------------------------------------------------------------*
753 * usb_pc_dmamap_destroy
755 * This function is NULL safe.
756 *------------------------------------------------------------------------*/
758 usb_pc_dmamap_destroy(struct usb_page_cache *pc)
761 bus_dmamap_destroy(pc->tag, pc->map);
767 /*------------------------------------------------------------------------*
768 * usb_dma_tag_find - factored out code
769 *------------------------------------------------------------------------*/
771 usb_dma_tag_find(struct usb_dma_parent_tag *udpt,
772 usb_size_t size, usb_size_t align)
774 struct usb_dma_tag *udt;
777 USB_ASSERT(align > 0, ("Invalid parameter align = 0\n"));
778 USB_ASSERT(size > 0, ("Invalid parameter size = 0\n"));
780 udt = udpt->utag_first;
781 nudt = udpt->utag_max;
785 if (udt->align == 0) {
786 usb_dma_tag_create(udt, size, align);
787 if (udt->tag == NULL) {
794 if ((udt->align == align) && (udt->size == size)) {
802 /*------------------------------------------------------------------------*
803 * usb_dma_tag_setup - initialise USB DMA tags
804 *------------------------------------------------------------------------*/
806 usb_dma_tag_setup(struct usb_dma_parent_tag *udpt,
807 struct usb_dma_tag *udt, bus_dma_tag_t dmat,
808 struct mtx *mtx, usb_dma_callback_t *func,
809 uint8_t ndmabits, uint8_t nudt)
811 memset(udpt, 0, sizeof(*udpt));
813 /* sanity checking */
817 /* something is corrupt */
820 /* initialise condition variable */
821 cv_init(udpt->cv, "USB DMA CV");
823 /* store some information */
827 udpt->utag_first = udt;
828 udpt->utag_max = nudt;
829 udpt->dma_bits = ndmabits;
832 memset(udt, 0, sizeof(*udt));
833 udt->tag_parent = udpt;
838 /*------------------------------------------------------------------------*
839 * usb_bus_tag_unsetup - factored out code
840 *------------------------------------------------------------------------*/
842 usb_dma_tag_unsetup(struct usb_dma_parent_tag *udpt)
844 struct usb_dma_tag *udt;
847 udt = udpt->utag_first;
848 nudt = udpt->utag_max;
853 /* destroy the USB DMA tag */
854 usb_dma_tag_destroy(udt);
860 if (udpt->utag_max) {
861 /* destroy the condition variable */
862 cv_destroy(udpt->cv);
866 /*------------------------------------------------------------------------*
869 * This function handles loading of virtual buffers into DMA and is
870 * only called when "dma_refcount" is zero.
871 *------------------------------------------------------------------------*/
873 usb_bdma_work_loop(struct usb_xfer_queue *pq)
875 struct usb_xfer_root *info;
876 struct usb_xfer *xfer;
877 usb_frcount_t nframes;
882 mtx_assert(info->xfer_mtx, MA_OWNED);
885 /* some error happened */
886 USB_BUS_LOCK(info->bus);
887 usbd_transfer_done(xfer, 0);
888 USB_BUS_UNLOCK(info->bus);
891 if (!xfer->flags_int.bdma_setup) {
893 usb_frlength_t frlength_0;
896 xfer->flags_int.bdma_setup = 1;
898 /* reset BUS-DMA load state */
902 if (xfer->flags_int.isochronous_xfr) {
903 /* only one frame buffer */
905 frlength_0 = xfer->sumlen;
907 /* can be multiple frame buffers */
908 nframes = xfer->nframes;
909 frlength_0 = xfer->frlengths[0];
913 * Set DMA direction first. This is needed to
914 * select the correct cache invalidate and cache
917 isread = USB_GET_DATA_ISREAD(xfer);
918 pg = xfer->dma_page_ptr;
920 if (xfer->flags_int.control_xfr &&
921 xfer->flags_int.control_hdr) {
923 if (xfer->flags_int.usb_mode == USB_MODE_DEVICE) {
924 /* The device controller writes to memory */
925 xfer->frbuffers[0].isread = 1;
927 /* The host controller reads from memory */
928 xfer->frbuffers[0].isread = 0;
932 xfer->frbuffers[0].isread = isread;
936 * Setup the "page_start" pointer which points to an array of
937 * USB pages where information about the physical address of a
938 * page will be stored. Also initialise the "isread" field of
939 * the USB page caches.
941 xfer->frbuffers[0].page_start = pg;
943 info->dma_nframes = nframes;
944 info->dma_currframe = 0;
945 info->dma_frlength_0 = frlength_0;
947 pg += (frlength_0 / USB_PAGE_SIZE);
950 while (--nframes > 0) {
951 xfer->frbuffers[nframes].isread = isread;
952 xfer->frbuffers[nframes].page_start = pg;
954 pg += (xfer->frlengths[nframes] / USB_PAGE_SIZE);
959 if (info->dma_error) {
960 USB_BUS_LOCK(info->bus);
961 usbd_transfer_done(xfer, USB_ERR_DMA_LOAD_FAILED);
962 USB_BUS_UNLOCK(info->bus);
965 if (info->dma_currframe != info->dma_nframes) {
967 if (info->dma_currframe == 0) {
969 usb_pc_load_mem(xfer->frbuffers,
970 info->dma_frlength_0, 0);
973 nframes = info->dma_currframe;
974 usb_pc_load_mem(xfer->frbuffers + nframes,
975 xfer->frlengths[nframes], 0);
978 /* advance frame index */
979 info->dma_currframe++;
984 usb_bdma_pre_sync(xfer);
986 /* start loading next USB transfer, if any */
987 usb_command_wrapper(pq, NULL);
989 /* finally start the hardware */
990 usbd_pipe_enter(xfer);
993 /*------------------------------------------------------------------------*
994 * usb_bdma_done_event
996 * This function is called when the BUS-DMA has loaded virtual memory
998 *------------------------------------------------------------------------*/
1000 usb_bdma_done_event(struct usb_dma_parent_tag *udpt)
1002 struct usb_xfer_root *info;
1004 info = USB_DMATAG_TO_XROOT(udpt);
1006 mtx_assert(info->xfer_mtx, MA_OWNED);
1009 info->dma_error = udpt->dma_error;
1011 /* enter workloop again */
1012 usb_command_wrapper(&info->dma_q,
1016 /*------------------------------------------------------------------------*
1019 * This function handles DMA synchronisation that must be done before
1020 * an USB transfer is started.
1021 *------------------------------------------------------------------------*/
1023 usb_bdma_pre_sync(struct usb_xfer *xfer)
1025 struct usb_page_cache *pc;
1026 usb_frcount_t nframes;
1028 if (xfer->flags_int.isochronous_xfr) {
1029 /* only one frame buffer */
1032 /* can be multiple frame buffers */
1033 nframes = xfer->nframes;
1036 pc = xfer->frbuffers;
1041 usb_pc_cpu_invalidate(pc);
1043 usb_pc_cpu_flush(pc);
1049 /*------------------------------------------------------------------------*
1050 * usb_bdma_post_sync
1052 * This function handles DMA synchronisation that must be done after
1053 * an USB transfer is complete.
1054 *------------------------------------------------------------------------*/
1056 usb_bdma_post_sync(struct usb_xfer *xfer)
1058 struct usb_page_cache *pc;
1059 usb_frcount_t nframes;
1061 if (xfer->flags_int.isochronous_xfr) {
1062 /* only one frame buffer */
1065 /* can be multiple frame buffers */
1066 nframes = xfer->nframes;
1069 pc = xfer->frbuffers;
1073 usb_pc_cpu_invalidate(pc);