2 * Copyright (c) 2006,2007
3 * Damien Bergamini <damien.bergamini@free.fr>
4 * Benjamin Close <Benjamin.Close@clearchain.com>
6 * Permission to use, copy, modify, and distribute this software for any
7 * purpose with or without fee is hereby granted, provided that the above
8 * copyright notice and this permission notice appear in all copies.
10 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
11 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
12 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
13 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
14 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
15 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
16 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
21 #ifndef __IF_WPI_DEBUG_H__
22 #define __IF_WPI_DEBUG_H__
26 WPI_DEBUG_XMIT = 0x00000001, /* basic xmit operation */
27 WPI_DEBUG_RECV = 0x00000002, /* basic recv operation */
28 WPI_DEBUG_STATE = 0x00000004, /* 802.11 state transitions */
29 WPI_DEBUG_HW = 0x00000008, /* Stage 1 (eeprom) debugging */
30 WPI_DEBUG_RESET = 0x00000010, /* reset processing */
31 WPI_DEBUG_FIRMWARE = 0x00000020, /* firmware(9) loading debug */
32 WPI_DEBUG_BEACON = 0x00000040, /* beacon handling */
33 WPI_DEBUG_WATCHDOG = 0x00000080, /* watchdog timeout */
34 WPI_DEBUG_INTR = 0x00000100, /* ISR */
35 WPI_DEBUG_SCAN = 0x00000200, /* Scan related operations */
36 WPI_DEBUG_NOTIFY = 0x00000400, /* State 2 Notif intr debug */
37 WPI_DEBUG_TEMP = 0x00000800, /* TXPower/Temp Calibration */
38 WPI_DEBUG_CMD = 0x00001000, /* cmd submission */
39 WPI_DEBUG_TRACE = 0x00002000, /* Print begin and start driver function */
40 WPI_DEBUG_PWRSAVE = 0x00004000, /* Power save operations */
41 WPI_DEBUG_EEPROM = 0x00008000, /* EEPROM info */
42 WPI_DEBUG_KEY = 0x00010000, /* node key management */
43 WPI_DEBUG_EDCA = 0x00020000, /* WME info */
44 WPI_DEBUG_ANY = 0xffffffff
47 #define DPRINTF(sc, m, ...) do { \
48 if (sc->sc_debug & (m)) \
49 printf(__VA_ARGS__); \
52 #define TRACE_STR_BEGIN "->%s: begin\n"
53 #define TRACE_STR_DOING "->Doing %s\n"
54 #define TRACE_STR_END "->%s: end\n"
55 #define TRACE_STR_END_ERR "->%s: end in error\n"
57 static const char *wpi_cmd_str(int cmd)
61 case WPI_UC_READY: return "UC_READY";
62 case WPI_RX_DONE: return "RX_DONE";
63 case WPI_START_SCAN: return "START_SCAN";
64 case WPI_SCAN_RESULTS: return "SCAN_RESULTS";
65 case WPI_STOP_SCAN: return "STOP_SCAN";
66 case WPI_BEACON_SENT: return "BEACON_SENT";
67 case WPI_RX_STATISTICS: return "RX_STATS";
68 case WPI_BEACON_STATISTICS: return "BEACON_STATS";
69 case WPI_STATE_CHANGED: return "STATE_CHANGED";
70 case WPI_BEACON_MISSED: return "BEACON_MISSED";
72 /* Command notifications */
73 case WPI_CMD_RXON: return "WPI_CMD_RXON";
74 case WPI_CMD_RXON_ASSOC: return "WPI_CMD_RXON_ASSOC";
75 case WPI_CMD_EDCA_PARAMS: return "WPI_CMD_EDCA_PARAMS";
76 case WPI_CMD_TIMING: return "WPI_CMD_TIMING";
77 case WPI_CMD_ADD_NODE: return "WPI_CMD_ADD_NODE";
78 case WPI_CMD_DEL_NODE: return "WPI_CMD_DEL_NODE";
79 case WPI_CMD_TX_DATA: return "WPI_CMD_TX_DATA";
80 case WPI_CMD_MRR_SETUP: return "WPI_CMD_MRR_SETUP";
81 case WPI_CMD_SET_LED: return "WPI_CMD_SET_LED";
82 case WPI_CMD_SET_POWER_MODE: return "WPI_CMD_SET_POWER_MODE";
83 case WPI_CMD_SCAN: return "WPI_CMD_SCAN";
84 case WPI_CMD_SET_BEACON: return "WPI_CMD_SET_BEACON";
85 case WPI_CMD_TXPOWER: return "WPI_CMD_TXPOWER";
86 case WPI_CMD_BT_COEX: return "WPI_CMD_BT_COEX";
89 KASSERT(1, ("Unknown Command: %d\n", cmd));
95 #define DPRINTF(sc, m, ...) do { (void) sc; } while (0)
98 #endif /* __IF_WPI_DEBUG_H__ */