2 * P5020 Silicon Device Tree Source
4 * Copyright 2010-2011 Freescale Semiconductor Inc.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 * * Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * * Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * * Neither the name of Freescale Semiconductor nor the
14 * names of its contributors may be used to endorse or promote products
15 * derived from this software without specific prior written permission.
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39 compatible = "fsl,P5020";
42 interrupt-parent = <&mpic>;
87 raideng_jr0 = &raideng_jr0;
88 raideng_jr1 = &raideng_jr1;
89 raideng_jr2 = &raideng_jr2;
90 raideng_jr3 = &raideng_jr3;
93 fman0_oh0 = &fman0_oh0;
94 fman0_oh1 = &fman0_oh1;
95 fman0_oh2 = &fman0_oh2;
96 fman0_oh3 = &fman0_oh3;
97 fman0_oh4 = &fman0_oh4;
98 fman0_oh5 = &fman0_oh5;
99 fman0_oh6 = &fman0_oh6;
100 fman0_rx0 = &fman0_rx0;
101 fman0_rx1 = &fman0_rx1;
102 fman0_rx2 = &fman0_rx2;
103 fman0_rx3 = &fman0_rx3;
104 fman0_rx4 = &fman0_rx4;
105 fman0_rx5 = &fman0_rx5;
109 #address-cells = <1>;
112 cpu0: PowerPC,e5500@0 {
115 bus-frequency = <799999998>;
116 next-level-cache = <&L2_0>;
118 next-level-cache = <&cpc>;
121 cpu1: PowerPC,e5500@1 {
124 next-level-cache = <&L2_1>;
126 next-level-cache = <&cpc>;
131 dcsr: dcsr@f00000000 {
132 #address-cells = <1>;
134 compatible = "fsl,dcsr", "simple-bus";
137 compatible = "fsl,dcsr-epu";
138 interrupts = <52 2 0 0
141 interrupt-parent = <&mpic>;
145 compatible = "fsl,dcsr-npc";
146 reg = <0x1000 0x1000 0x1000000 0x8000>;
149 compatible = "fsl,dcsr-nxc";
150 reg = <0x2000 0x1000>;
153 compatible = "fsl,dcsr-corenet";
154 reg = <0x8000 0x1000 0xB0000 0x1000>;
157 compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa";
158 reg = <0x9000 0x1000>;
161 compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn";
162 reg = <0x11000 0x1000>;
165 compatible = "fsl,dcsr-ddr";
166 dev-handle = <&ddr1>;
167 reg = <0x12000 0x1000>;
170 compatible = "fsl,dcsr-ddr";
171 dev-handle = <&ddr2>;
172 reg = <0x13000 0x1000>;
175 compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal";
176 reg = <0x18000 0x1000>;
179 compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm";
180 reg = <0x22000 0x1000>;
182 dcsr-cpu-sb-proxy@40000 {
183 compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
184 cpu-handle = <&cpu0>;
185 reg = <0x40000 0x1000>;
187 dcsr-cpu-sb-proxy@41000 {
188 compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
189 cpu-handle = <&cpu1>;
190 reg = <0x41000 0x1000>;
194 bman-portals@ff4000000 {
195 #address-cells = <0x1>;
197 compatible = "fsl,bman-portals";
198 ranges = <0x0 0xf 0xfde00000 0x200000>;
201 compatible = "fsl,p5020-bman-portal", "fsl,bman-portal";
202 reg = <0x0 0x4000 0x100000 0x1000>;
203 interrupts = <105 2 0 0>;
207 compatible = "fsl,p5020-bman-portal", "fsl,bman-portal";
208 reg = <0x4000 0x4000 0x101000 0x1000>;
209 interrupts = <107 2 0 0>;
213 compatible = "fsl,p5020-bman-portal", "fsl,bman-portal";
214 reg = <0x8000 0x4000 0x102000 0x1000>;
215 interrupts = <109 2 0 0>;
219 compatible = "fsl,p5020-bman-portal", "fsl,bman-portal";
220 reg = <0xc000 0x4000 0x103000 0x1000>;
221 interrupts = <111 2 0 0>;
225 compatible = "fsl,p5020-bman-portal", "fsl,bman-portal";
226 reg = <0x10000 0x4000 0x104000 0x1000>;
227 interrupts = <113 2 0 0>;
231 compatible = "fsl,p5020-bman-portal", "fsl,bman-portal";
232 reg = <0x14000 0x4000 0x105000 0x1000>;
233 interrupts = <115 2 0 0>;
237 compatible = "fsl,p5020-bman-portal", "fsl,bman-portal";
238 reg = <0x18000 0x4000 0x106000 0x1000>;
239 interrupts = <117 2 0 0>;
243 compatible = "fsl,p5020-bman-portal", "fsl,bman-portal";
244 reg = <0x1c000 0x4000 0x107000 0x1000>;
245 interrupts = <119 2 0 0>;
249 compatible = "fsl,p5020-bman-portal", "fsl,bman-portal";
250 reg = <0x20000 0x4000 0x108000 0x1000>;
251 interrupts = <121 2 0 0>;
255 compatible = "fsl,p5020-bman-portal", "fsl,bman-portal";
256 reg = <0x24000 0x4000 0x109000 0x1000>;
257 interrupts = <123 2 0 0>;
261 compatible = "fsl,p5020-bpool", "fsl,bpool";
263 fsl,bpool-cfg = <0 0x100 0 1 0 0x100>;
267 qman-portals@ff4200000 {
268 #address-cells = <0x1>;
270 compatible = "fsl,qman-portals";
271 ranges = <0x0 0xf 0xfdc00000 0x200000>;
272 qportal0: qman-portal@0 {
274 compatible = "fsl,p5020-qman-portal", "fsl,qman-portal";
275 reg = <0x0 0x4000 0x100000 0x1000>;
276 interrupts = <104 0x2 0 0>;
277 fsl,qman-channel-id = <0x0>;
280 qportal1: qman-portal@4000 {
282 compatible = "fsl,p5020-qman-portal", "fsl,qman-portal";
283 reg = <0x4000 0x4000 0x101000 0x1000>;
284 interrupts = <106 0x2 0 0>;
285 fsl,qman-channel-id = <0x1>;
288 qportal2: qman-portal@8000 {
290 compatible = "fsl,p5020-qman-portal", "fsl,qman-portal";
291 reg = <0x8000 0x4000 0x102000 0x1000>;
292 interrupts = <108 0x2 0 0>;
293 fsl,qman-channel-id = <0x2>;
296 qportal3: qman-portal@c000 {
298 compatible = "fsl,p5020-qman-portal", "fsl,qman-portal";
299 reg = <0xc000 0x4000 0x103000 0x1000>;
300 interrupts = <110 0x2 0 0>;
301 fsl,qman-channel-id = <0x3>;
304 qportal4: qman-portal@10000 {
306 compatible = "fsl,p5020-qman-portal", "fsl,qman-portal";
307 reg = <0x10000 0x4000 0x104000 0x1000>;
308 interrupts = <112 0x2 0 0>;
309 fsl,qman-channel-id = <0x4>;
312 qportal5: qman-portal@14000 {
314 compatible = "fsl,p5020-qman-portal", "fsl,qman-portal";
315 reg = <0x14000 0x4000 0x105000 0x1000>;
316 interrupts = <114 0x2 0 0>;
317 fsl,qman-channel-id = <0x5>;
320 qportal6: qman-portal@18000 {
322 compatible = "fsl,p5020-qman-portal", "fsl,qman-portal";
323 reg = <0x18000 0x4000 0x106000 0x1000>;
324 interrupts = <116 0x2 0 0>;
325 fsl,qman-channel-id = <0x6>;
328 qportal7: qman-portal@1c000 {
330 compatible = "fsl,p5020-qman-portal", "fsl,qman-portal";
331 reg = <0x1c000 0x4000 0x107000 0x1000>;
332 interrupts = <118 0x2 0 0>;
333 fsl,qman-channel-id = <0x7>;
336 qportal8: qman-portal@20000 {
338 compatible = "fsl,p5020-qman-portal", "fsl,qman-portal";
339 reg = <0x20000 0x4000 0x108000 0x1000>;
340 interrupts = <120 0x2 0 0>;
341 fsl,qman-channel-id = <0x8>;
344 qportal9: qman-portal@24000 {
346 compatible = "fsl,p5020-qman-portal", "fsl,qman-portal";
347 reg = <0x24000 0x4000 0x109000 0x1000>;
348 interrupts = <122 0x2 0 0>;
349 fsl,qman-channel-id = <0x9>;
352 qpool1: qman-pool@1 {
354 compatible = "fsl,p5020-qman-pool-channel", "fsl,qman-pool-channel";
355 fsl,qman-channel-id = <0x21>;
358 qpool2: qman-pool@2 {
360 compatible = "fsl,p5020-qman-pool-channel", "fsl,qman-pool-channel";
361 fsl,qman-channel-id = <0x22>;
364 qpool3: qman-pool@3 {
366 compatible = "fsl,p5020-qman-pool-channel", "fsl,qman-pool-channel";
367 fsl,qman-channel-id = <0x23>;
370 qpool4: qman-pool@4 {
372 compatible = "fsl,p5020-qman-pool-channel", "fsl,qman-pool-channel";
373 fsl,qman-channel-id = <0x24>;
376 qpool5: qman-pool@5 {
378 compatible = "fsl,p5020-qman-pool-channel", "fsl,qman-pool-channel";
379 fsl,qman-channel-id = <0x25>;
382 qpool6: qman-pool@6 {
384 compatible = "fsl,p5020-qman-pool-channel", "fsl,qman-pool-channel";
385 fsl,qman-channel-id = <0x26>;
388 qpool7: qman-pool@7 {
390 compatible = "fsl,p5020-qman-pool-channel", "fsl,qman-pool-channel";
391 fsl,qman-channel-id = <0x27>;
394 qpool8: qman-pool@8 {
396 compatible = "fsl,p5020-qman-pool-channel", "fsl,qman-pool-channel";
397 fsl,qman-channel-id = <0x28>;
400 qpool9: qman-pool@9 {
402 compatible = "fsl,p5020-qman-pool-channel", "fsl,qman-pool-channel";
403 fsl,qman-channel-id = <0x29>;
406 qpool10: qman-pool@10 {
408 compatible = "fsl,p5020-qman-pool-channel", "fsl,qman-pool-channel";
409 fsl,qman-channel-id = <0x2a>;
412 qpool11: qman-pool@11 {
414 compatible = "fsl,p5020-qman-pool-channel", "fsl,qman-pool-channel";
415 fsl,qman-channel-id = <0x2b>;
418 qpool12: qman-pool@12 {
420 compatible = "fsl,p5020-qman-pool-channel", "fsl,qman-pool-channel";
421 fsl,qman-channel-id = <0x2c>;
424 qpool13: qman-pool@13 {
426 compatible = "fsl,p5020-qman-pool-channel", "fsl,qman-pool-channel";
427 fsl,qman-channel-id = <0x2d>;
430 qpool14: qman-pool@14 {
432 compatible = "fsl,p5020-qman-pool-channel", "fsl,qman-pool-channel";
433 fsl,qman-channel-id = <0x2e>;
436 qpool15: qman-pool@15 {
438 compatible = "fsl,p5020-qman-pool-channel", "fsl,qman-pool-channel";
439 fsl,qman-channel-id = <0x2f>;
444 #address-cells = <1>;
447 compatible = "simple-bus";
449 bus-frequency = <0>; // Filled out by kernel.
451 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
452 reg = <0xf 0xfe000000 0 0x00001000>;
455 compatible = "fsl,soc-sram-error";
456 interrupts = <16 2 1 29>;
460 compatible = "fsl,corenet-law";
465 ddr1: memory-controller@8000 {
466 compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
467 reg = <0x8000 0x1000>;
468 interrupts = <16 2 1 23>;
471 ddr2: memory-controller@9000 {
472 compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
473 reg = <0x9000 0x1000>;
474 interrupts = <16 2 1 22>;
477 cpc: l3-cache-controller@10000 {
478 compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
479 reg = <0x10000 0x1000
481 interrupts = <16 2 1 27
486 compatible = "fsl,corenet-cf";
487 reg = <0x18000 0x1000>;
488 interrupts = <16 2 1 31>;
489 fsl,ccf-num-csdids = <32>;
490 fsl,ccf-num-snoopids = <32>;
494 compatible = "fsl,pamu-v1.0", "fsl,pamu";
495 reg = <0x20000 0x4000>;
502 clock-frequency = <0>;
503 interrupt-controller;
504 #address-cells = <0>;
505 #interrupt-cells = <4>;
506 reg = <0x40000 0x40000>;
507 compatible = "fsl,mpic", "chrp,open-pic";
508 device_type = "open-pic";
512 compatible = "fsl,mpic-msi";
513 reg = <0x41600 0x200>;
514 msi-available-ranges = <0 0x100>;
527 compatible = "fsl,mpic-msi";
528 reg = <0x41800 0x200>;
529 msi-available-ranges = <0 0x100>;
542 compatible = "fsl,mpic-msi";
543 reg = <0x41a00 0x200>;
544 msi-available-ranges = <0 0x100>;
556 guts: global-utilities@e0000 {
557 compatible = "fsl,qoriq-device-config-1.0";
558 reg = <0xe0000 0xe00>;
561 fsl,liodn-bits = <12>;
564 pins: global-utilities@e0e00 {
565 compatible = "fsl,qoriq-pin-control-1.0";
566 reg = <0xe0e00 0x200>;
570 clockgen: global-utilities@e1000 {
571 compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
572 reg = <0xe1000 0x1000>;
573 clock-frequency = <0>;
576 rcpm: global-utilities@e2000 {
577 compatible = "fsl,qoriq-rcpm-1.0";
578 reg = <0xe2000 0x1000>;
583 compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0";
584 reg = <0xe8000 0x1000>;
587 serdes: serdes@ea000 {
588 compatible = "fsl,p5020-serdes";
589 reg = <0xea000 0x1000>;
593 #address-cells = <1>;
595 compatible = "fsl,p5020-dma", "fsl,eloplus-dma";
596 reg = <0x100300 0x4>;
597 ranges = <0x0 0x100100 0x200>;
600 compatible = "fsl,p5020-dma-channel",
601 "fsl,eloplus-dma-channel";
604 interrupts = <28 2 0 0>;
607 compatible = "fsl,p5020-dma-channel",
608 "fsl,eloplus-dma-channel";
611 interrupts = <29 2 0 0>;
614 compatible = "fsl,p5020-dma-channel",
615 "fsl,eloplus-dma-channel";
618 interrupts = <30 2 0 0>;
621 compatible = "fsl,p5020-dma-channel",
622 "fsl,eloplus-dma-channel";
625 interrupts = <31 2 0 0>;
630 #address-cells = <1>;
632 compatible = "fsl,p5020-dma", "fsl,eloplus-dma";
633 reg = <0x101300 0x4>;
634 ranges = <0x0 0x101100 0x200>;
637 compatible = "fsl,p5020-dma-channel",
638 "fsl,eloplus-dma-channel";
641 interrupts = <32 2 0 0>;
644 compatible = "fsl,p5020-dma-channel",
645 "fsl,eloplus-dma-channel";
648 interrupts = <33 2 0 0>;
651 compatible = "fsl,p5020-dma-channel",
652 "fsl,eloplus-dma-channel";
655 interrupts = <34 2 0 0>;
658 compatible = "fsl,p5020-dma-channel",
659 "fsl,eloplus-dma-channel";
662 interrupts = <35 2 0 0>;
667 #address-cells = <1>;
669 compatible = "fsl,p5020-espi", "fsl,mpc8536-espi";
670 reg = <0x110000 0x1000>;
671 interrupts = <53 0x2 0 0>;
672 fsl,espi-num-chipselects = <4>;
676 compatible = "fsl,p5020-esdhc", "fsl,esdhc";
677 reg = <0x114000 0x1000>;
678 interrupts = <48 2 0 0>;
680 clock-frequency = <0>;
684 #address-cells = <1>;
687 compatible = "fsl-i2c";
688 reg = <0x118000 0x100>;
689 interrupts = <38 2 0 0>;
694 #address-cells = <1>;
697 compatible = "fsl-i2c";
698 reg = <0x118100 0x100>;
699 interrupts = <38 2 0 0>;
704 #address-cells = <1>;
707 compatible = "fsl-i2c";
708 reg = <0x119000 0x100>;
709 interrupts = <39 2 0 0>;
714 #address-cells = <1>;
717 compatible = "fsl-i2c";
718 reg = <0x119100 0x100>;
719 interrupts = <39 2 0 0>;
723 serial0: serial@11c500 {
725 device_type = "serial";
726 compatible = "ns16550";
727 reg = <0x11c500 0x100>;
728 clock-frequency = <0>;
729 interrupts = <36 2 0 0>;
732 serial1: serial@11c600 {
734 device_type = "serial";
735 compatible = "ns16550";
736 reg = <0x11c600 0x100>;
737 clock-frequency = <0>;
738 interrupts = <36 2 0 0>;
741 serial2: serial@11d500 {
743 device_type = "serial";
744 compatible = "ns16550";
745 reg = <0x11d500 0x100>;
746 clock-frequency = <0>;
747 interrupts = <37 2 0 0>;
750 serial3: serial@11d600 {
752 device_type = "serial";
753 compatible = "ns16550";
754 reg = <0x11d600 0x100>;
755 clock-frequency = <0>;
756 interrupts = <37 2 0 0>;
760 compatible = "fsl,p5020-gpio", "fsl,qoriq-gpio";
761 reg = <0x130000 0x1000>;
762 interrupts = <55 2 0 0>;
768 compatible = "fsl,rman";
769 #address-cells = <1>;
771 ranges = <0x0 0x1e0000 0x20000>;
772 reg = <0x1e0000 0x20000>;
773 interrupts = <16 2 1 11>; /* err_irq */
774 fsl,qman-channels-id = <0x62 0x63>;
777 compatible = "fsl,rman-inbound-block";
781 compatible = "fsl,rman-global-cfg";
785 compatible = "fsl,rman-inbound-block";
786 reg = <0x1000 0x800>;
789 compatible = "fsl,rman-inbound-block";
790 reg = <0x2000 0x800>;
793 compatible = "fsl,rman-inbound-block";
794 reg = <0x3000 0x800>;
799 compatible = "fsl,p5020-usb2-mph",
800 "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
801 reg = <0x210000 0x1000>;
802 #address-cells = <1>;
804 interrupts = <44 0x2 0 0>;
810 compatible = "fsl,p5020-usb2-dr",
811 "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
812 reg = <0x211000 0x1000>;
813 #address-cells = <1>;
815 interrupts = <45 0x2 0 0>;
821 compatible = "fsl,p5020-sata", "fsl,pq-sata-v2";
822 reg = <0x220000 0x1000>;
823 interrupts = <68 0x2 0 0>;
827 compatible = "fsl,p5020-sata", "fsl,pq-sata-v2";
828 reg = <0x221000 0x1000>;
829 interrupts = <69 0x2 0 0>;
832 crypto: crypto@300000 {
833 compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
834 #address-cells = <1>;
836 reg = <0x300000 0x10000>;
837 ranges = <0 0x300000 0x10000>;
838 interrupts = <92 2 0 0>;
841 compatible = "fsl,sec-v4.2-job-ring",
842 "fsl,sec-v4.0-job-ring";
843 reg = <0x1000 0x1000>;
844 interrupts = <88 2 0 0>;
848 compatible = "fsl,sec-v4.2-job-ring",
849 "fsl,sec-v4.0-job-ring";
850 reg = <0x2000 0x1000>;
851 interrupts = <89 2 0 0>;
855 compatible = "fsl,sec-v4.2-job-ring",
856 "fsl,sec-v4.0-job-ring";
857 reg = <0x3000 0x1000>;
858 interrupts = <90 2 0 0>;
862 compatible = "fsl,sec-v4.2-job-ring",
863 "fsl,sec-v4.0-job-ring";
864 reg = <0x4000 0x1000>;
865 interrupts = <91 2 0 0>;
869 compatible = "fsl,sec-v4.2-rtic",
871 #address-cells = <1>;
873 reg = <0x6000 0x100>;
874 ranges = <0x0 0x6100 0xe00>;
877 compatible = "fsl,sec-v4.2-rtic-memory",
878 "fsl,sec-v4.0-rtic-memory";
879 reg = <0x00 0x20 0x100 0x80>;
883 compatible = "fsl,sec-v4.2-rtic-memory",
884 "fsl,sec-v4.0-rtic-memory";
885 reg = <0x20 0x20 0x200 0x80>;
889 compatible = "fsl,sec-v4.2-rtic-memory",
890 "fsl,sec-v4.0-rtic-memory";
891 reg = <0x40 0x20 0x300 0x80>;
895 compatible = "fsl,sec-v4.2-rtic-memory",
896 "fsl,sec-v4.0-rtic-memory";
897 reg = <0x60 0x20 0x500 0x80>;
902 sec_mon: sec_mon@314000 {
903 compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
904 reg = <0x314000 0x1000>;
905 interrupts = <93 2 0 0>;
908 raideng: raideng@320000 {
909 compatible = "fsl,raideng-v1.0";
910 #address-cells = <1>;
912 reg = <0x320000 0x10000>;
913 ranges = <0 0x320000 0x10000>;
916 compatible = "fsl,raideng-v1.0-job-queue";
917 #address-cells = <1>;
919 reg = <0x1000 0x1000>;
920 ranges = <0x0 0x1000 0x1000>;
923 compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
925 interrupts = <139 2 0 0>;
926 interrupt-parent = <&mpic>;
929 raideng_jr1: jr@400 {
930 compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-lp-ring";
932 interrupts = <140 2 0 0>;
933 interrupt-parent = <&mpic>;
938 compatible = "fsl,raideng-v1.0-job-queue";
939 #address-cells = <1>;
941 reg = <0x2000 0x1000>;
942 ranges = <0x0 0x2000 0x1000>;
945 compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
947 interrupts = <141 2 0 0>;
948 interrupt-parent = <&mpic>;
951 raideng_jr3: jr@400 {
952 compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-lp-ring";
954 interrupts = <142 2 0 0>;
955 interrupt-parent = <&mpic>;
961 compatible = "fsl,pme";
962 reg = <0x316000 0x10000>;
963 /* "fsl,pme-pdsr = <0x0 0x23000000 0x0 0x01000000>; */
964 /* "fsl,pme-sre = <0x0 0x24000000 0x0 0x00a00000>; */
965 interrupts = <16 2 1 5>;
969 compatible = "fsl,p5020-qman", "fsl,qman";
970 reg = <0x318000 0x1000>;
971 interrupts = <16 2 1 3>;
972 /* Commented out, use default allocation */
973 /* "fsl,qman-fqd = <0x0 0x20000000 0x0 0x01000000>; */
974 /* "fsl,qman-pfdr = <0x0 0x21000000 0x0 0x01000000>; */
978 compatible = "fsl,p5020-bman", "fsl,bman";
979 reg = <0x31a000 0x1000>;
980 interrupts = <16 2 1 2>;
981 /* Same as "fsl,qman-*, use default allocation */
982 /* "fsl,bman-fbpr = <0x0 0x22000000 0x0 0x01000000>; */
986 #address-cells = <1>;
989 compatible = "fsl,p5020-fman", "fsl,fman", "simple-bus";
990 ranges = <0 0x400000 0x100000>;
991 reg = <0x400000 0x100000>;
992 clock-frequency = <0>;
998 compatible = "fsl,p5020-fman-cc", "fsl,fman-cc";
1002 compatible = "fsl,p5020-fman-parser", "fsl,fman-parser";
1003 reg = <0xc7000 0x1000>;
1007 compatible = "fsl,p5020-fman-keygen", "fsl,fman-keygen";
1008 reg = <0xc1000 0x1000>;
1012 compatible = "fsl,p5020-fman-policer", "fsl,fman-policer";
1013 reg = <0xc0000 0x1000>;
1017 compatible = "fsl,p5020-fman-muram", "fsl,fman-muram";
1018 reg = <0x0 0x28000>;
1022 compatible = "fsl,p5020-fman-bmi", "fsl,fman-bmi";
1023 reg = <0x80000 0x400>;
1027 compatible = "fsl,p5020-fman-qmi", "fsl,fman-qmi";
1028 reg = <0x80400 0x400>;
1031 fman0_rx0: port@88000 {
1033 compatible = "fsl,p5020-fman-port-1g-rx", "fsl,fman-port-1g-rx", "fsl,fman-v2-port-rx";
1034 reg = <0x88000 0x1000>;
1036 fman0_rx1: port@89000 {
1038 compatible = "fsl,p5020-fman-port-1g-rx", "fsl,fman-port-1g-rx", "fsl,fman-v2-port-rx";
1039 reg = <0x89000 0x1000>;
1041 fman0_rx2: port@8a000 {
1043 compatible = "fsl,p5020-fman-port-1g-rx", "fsl,fman-port-1g-rx", "fsl,fman-v2-port-rx";
1044 reg = <0x8a000 0x1000>;
1046 fman0_rx3: port@8b000 {
1048 compatible = "fsl,p5020-fman-port-1g-rx", "fsl,fman-port-1g-rx", "fsl,fman-v2-port-rx";
1049 reg = <0x8b000 0x1000>;
1051 fman0_rx4: port@8c000 {
1053 compatible = "fsl,p5020-fman-port-1g-rx", "fsl,fman-port-1g-rx", "fsl,fman-v2-port-rx";
1054 reg = <0x8c000 0x1000>;
1056 fman0_rx5: port@90000 {
1058 compatible = "fsl,p5020-fman-port-10g-rx", "fsl,fman-port-10g-rx";
1059 reg = <0x90000 0x1000>;
1062 fman0_tx5: port@b0000 {
1064 compatible = "fsl,p5020-fman-port-10g-tx", "fsl,fman-port-10g-tx";
1065 reg = <0xb0000 0x1000>;
1066 fsl,qman-channel-id = <0x40>;
1068 fman0_tx0: port@a8000 {
1070 compatible = "fsl,p5020-fman-port-1g-tx", "fsl,fman-port-1g-tx", "fsl,fman-v2-port-tx";
1071 reg = <0xa8000 0x1000>;
1072 fsl,qman-channel-id = <0x41>;
1074 fman0_tx1: port@a9000 {
1076 compatible = "fsl,p5020-fman-port-1g-tx", "fsl,fman-port-1g-tx", "fsl,fman-v2-port-tx";
1077 reg = <0xa9000 0x1000>;
1078 fsl,qman-channel-id = <0x42>;
1080 fman0_tx2: port@aa000 {
1082 compatible = "fsl,p5020-fman-port-1g-tx", "fsl,fman-port-1g-tx", "fsl,fman-v2-port-tx";
1083 reg = <0xaa000 0x1000>;
1084 fsl,qman-channel-id = <0x43>;
1086 fman0_tx3: port@ab000 {
1088 compatible = "fsl,p5020-fman-port-1g-tx", "fsl,fman-port-1g-tx", "fsl,fman-v2-port-tx";
1089 reg = <0xab000 0x1000>;
1090 fsl,qman-channel-id = <0x44>;
1092 fman0_tx4: port@ac000 {
1094 compatible = "fsl,p5020-fman-port-1g-tx", "fsl,fman-port-1g-tx", "fsl,fman-v2-port-tx";
1095 reg = <0xac000 0x1000>;
1096 fsl,qman-channel-id = <0x45>;
1099 fman0_oh0: port@81000 {
1101 compatible = "fsl,p5020-fman-port-oh", "fsl,fman-port-oh";
1102 reg = <0x81000 0x1000>;
1103 fsl,qman-channel-id = <0x46>;
1105 fman0_oh1: port@82000 {
1107 compatible = "fsl,p5020-fman-port-oh", "fsl,fman-port-oh";
1108 reg = <0x82000 0x1000>;
1109 fsl,qman-channel-id = <0x47>;
1111 fman0_oh2: port@83000 {
1113 compatible = "fsl,p5020-fman-port-oh", "fsl,fman-port-oh";
1114 reg = <0x83000 0x1000>;
1115 fsl,qman-channel-id = <0x48>;
1117 fman0_oh3: port@84000 {
1119 compatible = "fsl,p5020-fman-port-oh", "fsl,fman-port-oh";
1120 reg = <0x84000 0x1000>;
1121 fsl,qman-channel-id = <0x49>;
1123 fman0_oh4: port@85000 {
1125 compatible = "fsl,p5020-fman-port-oh", "fsl,fman-port-oh";
1126 reg = <0x85000 0x1000>;
1127 fsl,qman-channel-id = <0x4a>;
1129 fman0_oh5: port@86000 {
1131 compatible = "fsl,p5020-fman-port-oh", "fsl,fman-port-oh";
1132 reg = <0x86000 0x1000>;
1133 fsl,qman-channel-id = <0x4b>;
1135 fman0_oh6: port@87000 {
1137 compatible = "fsl,p5020-fman-port-oh", "fsl,fman-port-oh";
1138 reg = <0x87000 0x1000>;
1141 enet0: ethernet@e0000 {
1143 compatible = "fsl,p5020-fman-1g-mac", "fsl,fman-1g-mac", "fsl,fman-dtsec";
1144 reg = <0xe0000 0x1000>;
1145 fsl,port-handles = <&fman0_rx0 &fman0_tx0>;
1146 ptimer-handle = <&ptp_timer0>;
1150 #address-cells = <1>;
1152 compatible = "fsl,fman-mdio";
1153 reg = <0xe1120 0xee0>;
1154 interrupts = <100 1 0 0>;
1157 enet1: ethernet@e2000 {
1159 compatible = "fsl,p5020-fman-1g-mac", "fsl,fman-1g-mac", "fsl,fman-dtsec";
1160 reg = <0xe2000 0x1000>;
1161 fsl,port-handles = <&fman0_rx1 &fman0_tx1>;
1162 ptimer-handle = <&ptp_timer0>;
1166 #address-cells = <1>;
1168 compatible = "fsl,fman-tbi";
1169 reg = <0xe3120 0xee0>;
1170 interrupts = <100 1 0 0>;
1173 enet2: ethernet@e4000 {
1175 compatible = "fsl,p5020-fman-1g-mac", "fsl,fman-1g-mac", "fsl,fman-dtsec";
1176 reg = <0xe4000 0x1000>;
1177 fsl,port-handles = <&fman0_rx2 &fman0_tx2>;
1178 ptimer-handle = <&ptp_timer0>;
1182 #address-cells = <1>;
1184 compatible = "fsl,fman-tbi";
1185 reg = <0xe5120 0xee0>;
1186 interrupts = <100 1 0 0>;
1189 enet3: ethernet@e6000 {
1191 compatible = "fsl,p5020-fman-1g-mac", "fsl,fman-1g-mac", "fsl,fman-dtsec";
1192 reg = <0xe6000 0x1000>;
1193 fsl,port-handles = <&fman0_rx3 &fman0_tx3>;
1194 ptimer-handle = <&ptp_timer0>;
1198 #address-cells = <1>;
1200 compatible = "fsl,fman-tbi";
1201 reg = <0xe7120 0xee0>;
1202 interrupts = <100 1 0 0>;
1205 enet4: ethernet@e8000 {
1207 compatible = "fsl,p5020-fman-1g-mac", "fsl,fman-1g-mac", "fsl,fman-dtsec";
1208 reg = <0xe8000 0x1000>;
1209 fsl,port-handles = <&fman0_rx4 &fman0_tx4>;
1210 ptimer-handle = <&ptp_timer0>;
1214 #address-cells = <1>;
1216 compatible = "fsl,fman-tbi";
1217 reg = <0xe9120 0xee0>;
1218 interrupts = <100 1 0 0>;
1221 enet5: ethernet@f0000 {
1223 compatible = "fsl,p5020-fman-10g-mac", "fsl,fman-10g-mac", "fsl,fman-xgec";
1224 reg = <0xf0000 0x1000>;
1225 fsl,port-handles = <&fman0_rx5 &fman0_tx5>;
1229 #address-cells = <1>;
1231 compatible = "fsl,fman-xmdio";
1232 reg = <0xf1000 0x1000>;
1233 interrupts = <100 1 0 0>;
1236 ptp_timer0: rtc@fe000 {
1237 compatible = "fsl,fman-rtc";
1238 reg = <0xfe000 0x1000>;
1244 compatible = "fsl,srio";
1245 interrupts = <16 2 1 11>;
1246 #address-cells = <2>;
1251 #address-cells = <2>;
1257 #address-cells = <2>;
1263 localbus@ffe124000 {
1264 compatible = "fsl,p5020-rev1.0-elbc", "simple-bus", "fsl,elbc";
1269 #address-cells = <2>;
1273 pci0: pcie@ffe200000 {
1274 compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
1275 device_type = "pci";
1278 #address-cells = <3>;
1280 bus-range = <0x0 0xff>;
1281 clock-frequency = <0x1fca055>;
1283 interrupts = <16 2 1 15>;
1287 #interrupt-cells = <1>;
1289 #address-cells = <3>;
1290 device_type = "pci";
1291 interrupts = <16 2 1 15>;
1292 interrupt-map-mask = <0xf800 0 0 7>;
1295 0000 0 0 1 &mpic 40 1 0 0
1296 0000 0 0 2 &mpic 1 1 0 0
1297 0000 0 0 3 &mpic 2 1 0 0
1298 0000 0 0 4 &mpic 3 1 0 0
1303 pci1: pcie@ffe201000 {
1304 compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
1305 device_type = "pci";
1306 status = "disabled";
1308 #address-cells = <3>;
1310 bus-range = <0 0xff>;
1311 clock-frequency = <0x1fca055>;
1313 interrupts = <16 2 1 14>;
1316 #interrupt-cells = <1>;
1318 #address-cells = <3>;
1319 device_type = "pci";
1320 interrupts = <16 2 1 14>;
1321 interrupt-map-mask = <0xf800 0 0 7>;
1324 0000 0 0 1 &mpic 41 1 0 0
1325 0000 0 0 2 &mpic 5 1 0 0
1326 0000 0 0 3 &mpic 6 1 0 0
1327 0000 0 0 4 &mpic 7 1 0 0
1332 pci2: pcie@ffe202000 {
1333 compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
1334 device_type = "pci";
1337 #address-cells = <3>;
1339 bus-range = <0x0 0xff>;
1340 clock-frequency = <0x1fca055>;
1342 interrupts = <16 2 1 13>;
1345 #interrupt-cells = <1>;
1347 #address-cells = <3>;
1348 device_type = "pci";
1349 interrupts = <16 2 1 13>;
1350 interrupt-map-mask = <0xf800 0 0 7>;
1353 0000 0 0 1 &mpic 42 1 0 0
1354 0000 0 0 2 &mpic 9 1 0 0
1355 0000 0 0 3 &mpic 10 1 0 0
1356 0000 0 0 4 &mpic 11 1 0 0
1361 pci3: pcie@ffe203000 {
1362 compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
1363 device_type = "pci";
1364 status = "disabled";
1366 #address-cells = <3>;
1368 bus-range = <0x0 0xff>;
1369 clock-frequency = <0x1fca055>;
1371 interrupts = <16 2 1 12>;
1374 #interrupt-cells = <1>;
1376 #address-cells = <3>;
1377 device_type = "pci";
1378 interrupts = <16 2 1 12>;
1379 interrupt-map-mask = <0xf800 0 0 7>;
1382 0000 0 0 1 &mpic 43 1 0 0
1383 0000 0 0 2 &mpic 0 1 0 0
1384 0000 0 0 3 &mpic 4 1 0 0
1385 0000 0 0 4 &mpic 8 1 0 0