1 // SPDX-License-Identifier: GPL-2.0
3 * Samsung's Exynos3250 based Rinato board device tree source
5 * Copyright (c) 2014 Samsung Electronics Co., Ltd.
6 * http://www.samsung.com
8 * Device tree source file for Samsung's Rinato board which is based on
9 * Samsung Exynos3250 SoC.
13 #include "exynos3250.dtsi"
14 #include "exynos4412-ppmu-common.dtsi"
15 #include <dt-bindings/input/input.h>
16 #include <dt-bindings/gpio/gpio.h>
17 #include <dt-bindings/clock/samsung,s2mps11.h>
20 model = "Samsung Rinato board";
21 compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
28 device_type = "memory";
29 reg = <0x40000000 0x1ff00000>;
33 compatible = "samsung,secure-firmware";
34 reg = <0x0205F000 0x1000>;
38 compatible = "gpio-keys";
41 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
42 linux,code = <KEY_POWER>;
44 debounce-interval = <10>;
49 i2c_max77836: i2c-gpio-0 {
50 compatible = "i2c-gpio";
51 gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
55 max77836: subpmic@25 {
56 compatible = "maxim,max77836";
57 interrupt-parent = <&gpx1>;
58 interrupts = <5 IRQ_TYPE_NONE>;
63 compatible = "maxim,max77836-muic";
67 compatible = "maxim,max77836-regulator";
68 safeout_reg: SAFEOUT {
69 regulator-name = "SAFEOUT";
72 charger_reg: CHARGER {
73 regulator-name = "CHARGER";
74 regulator-min-microamp = <45000>;
75 regulator-max-microamp = <475000>;
80 regulator-name = "MOT_2.7V";
81 regulator-min-microvolt = <1100000>;
82 regulator-max-microvolt = <2700000>;
86 regulator-name = "UNUSED_LDO2";
87 regulator-min-microvolt = <800000>;
88 regulator-max-microvolt = <3950000>;
93 compatible = "maxim,max77836-charger";
95 maxim,constant-uvolt = <4350000>;
96 maxim,fast-charge-uamp = <225000>;
97 maxim,eoc-uamp = <7500>;
98 maxim,ovp-uvolt = <6500000>;
104 compatible = "regulator-haptic";
105 haptic-supply = <&motor_reg>;
106 min-microvolt = <1100000>;
107 max-microvolt = <2700000>;
111 cpu_thermal: cpu-thermal {
114 /* Corresponds to 500MHz */
115 cooling-device = <&cpu0 5 5>;
118 /* Corresponds to 200MHz */
119 cooling-device = <&cpu0 8 8>;
127 vdd-supply = <&ldo3_reg>;
129 assigned-clocks = <&cmu CLK_SCLK_TSADC>;
130 assigned-clock-rates = <6000000>;
133 compatible = "ntc,ncp15wb473";
134 pullup-uv = <1800000>;
135 pullup-ohm = <100000>;
136 pulldown-ohm = <100000>;
137 io-channels = <&adc 0>;
141 compatible = "ntc,ncp15wb473";
142 pullup-uv = <1800000>;
143 pullup-ohm = <100000>;
144 pulldown-ohm = <100000>;
145 io-channels = <&adc 1>;
150 devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
151 vdd-supply = <&buck1_reg>;
156 devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
157 vdd-supply = <&buck3_reg>;
162 devfreq = <&bus_leftbus>;
167 devfreq = <&bus_leftbus>;
172 devfreq = <&bus_leftbus>;
177 devfreq = <&bus_leftbus>;
182 devfreq = <&bus_leftbus>;
187 devfreq = <&bus_leftbus>;
192 devfreq = <&bus_leftbus>;
197 cpu0-supply = <&buck2_reg>;
202 vbus-supply = <&safeout_reg>;
206 vusb_d-supply = <&ldo15_reg>;
207 vusb_a-supply = <&ldo12_reg>;
208 dr_mode = "peripheral";
213 vddcore-supply = <&ldo6_reg>;
214 vddio-supply = <&ldo6_reg>;
215 samsung,burst-clock-frequency = <250000000>;
216 samsung,esc-clock-frequency = <20000000>;
217 samsung,pll-clock-frequency = <24000000>;
221 compatible = "samsung,s6e63j0x03";
223 vdd3-supply = <&ldo16_reg>;
224 vci-supply = <&ldo20_reg>;
225 reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
226 te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
242 #address-cells = <1>;
244 samsung,i2c-sda-delay = <100>;
245 samsung,i2c-slave-addr = <0x10>;
246 samsung,i2c-max-bus-freq = <100000>;
250 compatible = "samsung,s2mps14-pmic";
251 interrupt-parent = <&gpx0>;
252 interrupts = <7 IRQ_TYPE_NONE>;
256 s2mps14_osc: clocks {
257 compatible = "samsung,s2mps14-clk";
259 clock-output-names = "s2mps14_ap", "unused",
265 regulator-name = "VAP_ALIVE_1.0V";
266 regulator-min-microvolt = <1000000>;
267 regulator-max-microvolt = <1000000>;
270 regulator-state-mem {
271 regulator-on-in-suspend;
276 regulator-name = "VAP_M1_1.2V";
277 regulator-min-microvolt = <1200000>;
278 regulator-max-microvolt = <1200000>;
281 regulator-state-mem {
282 regulator-off-in-suspend;
287 regulator-name = "VCC_AP_1.8V";
288 regulator-min-microvolt = <1800000>;
289 regulator-max-microvolt = <1800000>;
292 regulator-state-mem {
293 regulator-off-in-suspend;
298 regulator-name = "VAP_AVDD_PLL1";
299 regulator-min-microvolt = <1800000>;
300 regulator-max-microvolt = <1800000>;
303 regulator-state-mem {
304 regulator-off-in-suspend;
309 regulator-name = "VAP_PLL_ISO_1.0V";
310 regulator-min-microvolt = <1000000>;
311 regulator-max-microvolt = <1000000>;
314 regulator-state-mem {
315 regulator-off-in-suspend;
320 regulator-name = "VAP_VMIPI_1.0V";
321 regulator-min-microvolt = <1000000>;
322 regulator-max-microvolt = <1000000>;
325 regulator-state-mem {
326 regulator-off-in-suspend;
331 regulator-name = "VAP_AVDD_1.8V";
332 regulator-min-microvolt = <1800000>;
333 regulator-max-microvolt = <1800000>;
336 regulator-state-mem {
337 regulator-off-in-suspend;
342 regulator-name = "VAP_USB_3.0V";
343 regulator-min-microvolt = <3000000>;
344 regulator-max-microvolt = <3000000>;
347 regulator-state-mem {
348 regulator-off-in-suspend;
353 regulator-name = "V_LPDDR_1.2V";
354 regulator-min-microvolt = <1200000>;
355 regulator-max-microvolt = <1200000>;
358 regulator-state-mem {
359 regulator-on-in-suspend;
364 regulator-name = "UNUSED_LDO10";
365 regulator-min-microvolt = <1000000>;
366 regulator-max-microvolt = <1000000>;
368 regulator-state-mem {
369 regulator-off-in-suspend;
374 regulator-name = "V_EMMC_1.8V";
375 regulator-min-microvolt = <1800000>;
376 regulator-max-microvolt = <1800000>;
377 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
381 regulator-name = "V_EMMC_2.8V";
382 regulator-min-microvolt = <2800000>;
383 regulator-max-microvolt = <2800000>;
384 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
388 regulator-name = "CAM_AVDD_2.8V";
389 regulator-min-microvolt = <2800000>;
390 regulator-max-microvolt = <2800000>;
392 regulator-state-mem {
393 regulator-off-in-suspend;
398 regulator-name = "UNUSED_LDO14";
399 regulator-min-microvolt = <2700000>;
400 regulator-max-microvolt = <2700000>;
402 regulator-state-mem {
403 regulator-off-in-suspend;
408 regulator-name = "TSP_AVDD_3.3V";
409 regulator-min-microvolt = <3300000>;
410 regulator-max-microvolt = <3300000>;
412 regulator-state-mem {
413 regulator-off-in-suspend;
418 regulator-name = "LCD_VDD_3.3V";
419 regulator-min-microvolt = <3300000>;
420 regulator-max-microvolt = <3300000>;
422 regulator-state-mem {
423 regulator-off-in-suspend;
428 regulator-name = "V_IRLED_3.3V";
429 regulator-min-microvolt = <3300000>;
430 regulator-max-microvolt = <3300000>;
432 regulator-state-mem {
433 regulator-off-in-suspend;
438 regulator-name = "CAM_AF_2.8V";
439 regulator-min-microvolt = <2800000>;
440 regulator-max-microvolt = <2800000>;
442 regulator-state-mem {
443 regulator-off-in-suspend;
448 regulator-name = "TSP_VDD_1.8V";
449 regulator-min-microvolt = <1800000>;
450 regulator-max-microvolt = <1800000>;
452 regulator-state-mem {
453 regulator-off-in-suspend;
458 regulator-name = "LCD_VDD_1.8V";
459 regulator-min-microvolt = <1800000>;
460 regulator-max-microvolt = <1800000>;
462 regulator-state-mem {
463 regulator-off-in-suspend;
468 regulator-name = "CAM_IO_1.8V";
469 regulator-min-microvolt = <1800000>;
470 regulator-max-microvolt = <1800000>;
472 regulator-state-mem {
473 regulator-off-in-suspend;
478 regulator-name = "CAM_DVDD_1.2V";
479 regulator-min-microvolt = <1200000>;
480 regulator-max-microvolt = <1200000>;
482 regulator-state-mem {
483 regulator-off-in-suspend;
488 regulator-name = "HRM_VCC_1.8V";
489 regulator-min-microvolt = <1800000>;
490 regulator-max-microvolt = <1800000>;
495 regulator-name = "HRM_VCC_3.3V";
496 regulator-min-microvolt = <3000000>;
497 regulator-max-microvolt = <3000000>;
499 regulator-state-mem {
500 regulator-off-in-suspend;
505 regulator-name = "UNUSED_LDO25";
506 regulator-min-microvolt = <3000000>;
507 regulator-max-microvolt = <3000000>;
509 regulator-state-mem {
510 regulator-off-in-suspend;
515 regulator-name = "VAP_MIF_1.0V";
516 regulator-min-microvolt = <800000>;
517 regulator-max-microvolt = <900000>;
520 regulator-state-mem {
521 regulator-off-in-suspend;
526 regulator-name = "VAP_ARM_1.0V";
527 regulator-min-microvolt = <850000>;
528 regulator-max-microvolt = <1150000>;
531 regulator-state-mem {
532 regulator-off-in-suspend;
537 regulator-name = "VAP_INT3D_1.0V";
538 regulator-min-microvolt = <850000>;
539 regulator-max-microvolt = <1000000>;
542 regulator-state-mem {
543 regulator-off-in-suspend;
548 regulator-name = "VCC_SUB_1.95V";
549 regulator-min-microvolt = <1950000>;
550 regulator-max-microvolt = <1950000>;
553 regulator-state-mem {
554 regulator-on-in-suspend;
559 regulator-name = "VCC_SUB_1.35V";
560 regulator-min-microvolt = <1350000>;
561 regulator-max-microvolt = <1350000>;
564 regulator-state-mem {
565 regulator-on-in-suspend;
573 #address-cells = <1>;
575 samsung,i2c-sda-delay = <100>;
576 samsung,i2c-slave-addr = <0x10>;
577 samsung,i2c-max-bus-freq = <400000>;
581 compatible = "maxim,max77836-battery";
582 interrupt-parent = <&gpx1>;
583 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
597 #address-cells = <1>;
604 card-detect-delay = <200>;
605 vmmc-supply = <&ldo12_reg>;
606 clock-frequency = <100000000>;
607 max-frequency = <100000000>;
608 samsung,dw-mshc-ciu-div = <1>;
609 samsung,dw-mshc-sdr-timing = <0 1>;
610 samsung,dw-mshc-ddr-timing = <1 2>;
611 pinctrl-names = "default";
612 pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
618 assigned-clocks = <&cmu CLK_SCLK_UART0>;
619 assigned-clock-rates = <100000000>;
628 vtmu-supply = <&ldo7_reg>;
633 clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
634 clock-names = "rtc", "rtc_src";
639 clock-frequency = <24000000>;
643 pinctrl-names = "default";
644 pinctrl-0 = <&initial0 &sleep0>;
646 initial0: initial-state {
647 PIN_IN(gpa1-4, DOWN, LV1);
648 PIN_IN(gpa1-5, DOWN, LV1);
650 PIN_IN(gpc0-0, DOWN, LV1);
651 PIN_IN(gpc0-1, DOWN, LV1);
652 PIN_IN(gpc0-2, DOWN, LV1);
653 PIN_IN(gpc0-3, DOWN, LV1);
654 PIN_IN(gpc0-4, DOWN, LV1);
656 PIN_IN(gpd0-0, DOWN, LV1);
657 PIN_IN(gpd0-1, DOWN, LV1);
660 sleep0: sleep-state {
661 PIN_SLP(gpa0-0, INPUT, DOWN);
662 PIN_SLP(gpa0-1, INPUT, DOWN);
663 PIN_SLP(gpa0-2, INPUT, DOWN);
664 PIN_SLP(gpa0-3, INPUT, DOWN);
665 PIN_SLP(gpa0-4, INPUT, DOWN);
666 PIN_SLP(gpa0-5, INPUT, DOWN);
667 PIN_SLP(gpa0-6, INPUT, DOWN);
668 PIN_SLP(gpa0-7, INPUT, DOWN);
670 PIN_SLP(gpa1-0, INPUT, DOWN);
671 PIN_SLP(gpa1-1, INPUT, DOWN);
672 PIN_SLP(gpa1-2, INPUT, DOWN);
673 PIN_SLP(gpa1-3, INPUT, DOWN);
674 PIN_SLP(gpa1-4, INPUT, DOWN);
675 PIN_SLP(gpa1-5, INPUT, DOWN);
677 PIN_SLP(gpb-0, PREV, NONE);
678 PIN_SLP(gpb-1, PREV, NONE);
679 PIN_SLP(gpb-2, PREV, NONE);
680 PIN_SLP(gpb-3, PREV, NONE);
681 PIN_SLP(gpb-4, INPUT, DOWN);
682 PIN_SLP(gpb-5, INPUT, DOWN);
683 PIN_SLP(gpb-6, INPUT, DOWN);
684 PIN_SLP(gpb-7, INPUT, DOWN);
686 PIN_SLP(gpc0-0, INPUT, DOWN);
687 PIN_SLP(gpc0-1, INPUT, DOWN);
688 PIN_SLP(gpc0-2, INPUT, DOWN);
689 PIN_SLP(gpc0-3, INPUT, DOWN);
690 PIN_SLP(gpc0-4, INPUT, DOWN);
692 PIN_SLP(gpc1-0, INPUT, DOWN);
693 PIN_SLP(gpc1-1, INPUT, DOWN);
694 PIN_SLP(gpc1-2, INPUT, DOWN);
695 PIN_SLP(gpc1-3, INPUT, DOWN);
696 PIN_SLP(gpc1-4, INPUT, DOWN);
698 PIN_SLP(gpd0-0, INPUT, DOWN);
699 PIN_SLP(gpd0-1, INPUT, DOWN);
700 PIN_SLP(gpd0-2, INPUT, NONE);
701 PIN_SLP(gpd0-3, INPUT, NONE);
703 PIN_SLP(gpd1-0, INPUT, NONE);
704 PIN_SLP(gpd1-1, INPUT, NONE);
705 PIN_SLP(gpd1-2, INPUT, NONE);
706 PIN_SLP(gpd1-3, INPUT, NONE);
711 pinctrl-names = "default";
712 pinctrl-0 = <&initial1 &sleep1>;
714 initial1: initial-state {
715 PIN_IN(gpe0-6, DOWN, LV1);
716 PIN_IN(gpe0-7, DOWN, LV1);
718 PIN_IN(gpe1-0, DOWN, LV1);
719 PIN_IN(gpe1-3, DOWN, LV1);
720 PIN_IN(gpe1-4, DOWN, LV1);
721 PIN_IN(gpe1-5, DOWN, LV1);
722 PIN_IN(gpe1-6, DOWN, LV1);
724 PIN_IN(gpk2-0, DOWN, LV1);
725 PIN_IN(gpk2-1, DOWN, LV1);
726 PIN_IN(gpk2-2, DOWN, LV1);
727 PIN_IN(gpk2-3, DOWN, LV1);
728 PIN_IN(gpk2-4, DOWN, LV1);
729 PIN_IN(gpk2-5, DOWN, LV1);
730 PIN_IN(gpk2-6, DOWN, LV1);
732 PIN_IN(gpm0-0, DOWN, LV1);
733 PIN_IN(gpm0-1, DOWN, LV1);
734 PIN_IN(gpm0-2, DOWN, LV1);
735 PIN_IN(gpm0-3, DOWN, LV1);
736 PIN_IN(gpm0-4, DOWN, LV1);
737 PIN_IN(gpm0-5, DOWN, LV1);
738 PIN_IN(gpm0-6, DOWN, LV1);
739 PIN_IN(gpm0-7, DOWN, LV1);
741 PIN_IN(gpm1-0, DOWN, LV1);
742 PIN_IN(gpm1-1, DOWN, LV1);
743 PIN_IN(gpm1-2, DOWN, LV1);
744 PIN_IN(gpm1-3, DOWN, LV1);
745 PIN_IN(gpm1-4, DOWN, LV1);
746 PIN_IN(gpm1-5, DOWN, LV1);
747 PIN_IN(gpm1-6, DOWN, LV1);
749 PIN_IN(gpm2-0, DOWN, LV1);
750 PIN_IN(gpm2-1, DOWN, LV1);
752 PIN_IN(gpm3-0, DOWN, LV1);
753 PIN_IN(gpm3-1, DOWN, LV1);
754 PIN_IN(gpm3-2, DOWN, LV1);
755 PIN_IN(gpm3-3, DOWN, LV1);
756 PIN_IN(gpm3-4, DOWN, LV1);
758 PIN_IN(gpm4-1, DOWN, LV1);
759 PIN_IN(gpm4-2, DOWN, LV1);
760 PIN_IN(gpm4-3, DOWN, LV1);
761 PIN_IN(gpm4-4, DOWN, LV1);
762 PIN_IN(gpm4-5, DOWN, LV1);
763 PIN_IN(gpm4-6, DOWN, LV1);
764 PIN_IN(gpm4-7, DOWN, LV1);
767 sleep1: sleep-state {
768 PIN_SLP(gpe0-0, PREV, NONE);
769 PIN_SLP(gpe0-1, PREV, NONE);
770 PIN_SLP(gpe0-2, INPUT, DOWN);
771 PIN_SLP(gpe0-3, INPUT, UP);
772 PIN_SLP(gpe0-4, INPUT, DOWN);
773 PIN_SLP(gpe0-5, INPUT, DOWN);
774 PIN_SLP(gpe0-6, INPUT, DOWN);
775 PIN_SLP(gpe0-7, INPUT, DOWN);
777 PIN_SLP(gpe1-0, INPUT, DOWN);
778 PIN_SLP(gpe1-1, PREV, NONE);
779 PIN_SLP(gpe1-2, INPUT, DOWN);
780 PIN_SLP(gpe1-3, INPUT, DOWN);
781 PIN_SLP(gpe1-4, INPUT, DOWN);
782 PIN_SLP(gpe1-5, INPUT, DOWN);
783 PIN_SLP(gpe1-6, INPUT, DOWN);
784 PIN_SLP(gpe1-7, INPUT, NONE);
786 PIN_SLP(gpe2-0, INPUT, NONE);
787 PIN_SLP(gpe2-1, INPUT, NONE);
788 PIN_SLP(gpe2-2, INPUT, NONE);
790 PIN_SLP(gpk0-0, INPUT, DOWN);
791 PIN_SLP(gpk0-1, INPUT, DOWN);
792 PIN_SLP(gpk0-2, OUT0, NONE);
793 PIN_SLP(gpk0-3, INPUT, DOWN);
794 PIN_SLP(gpk0-4, INPUT, DOWN);
795 PIN_SLP(gpk0-5, INPUT, DOWN);
796 PIN_SLP(gpk0-6, INPUT, DOWN);
797 PIN_SLP(gpk0-7, INPUT, DOWN);
799 PIN_SLP(gpk1-0, INPUT, DOWN);
800 PIN_SLP(gpk1-1, INPUT, DOWN);
801 PIN_SLP(gpk1-2, INPUT, DOWN);
802 PIN_SLP(gpk1-3, INPUT, DOWN);
803 PIN_SLP(gpk1-4, INPUT, DOWN);
804 PIN_SLP(gpk1-5, INPUT, DOWN);
805 PIN_SLP(gpk1-6, INPUT, DOWN);
807 PIN_SLP(gpk2-0, INPUT, DOWN);
808 PIN_SLP(gpk2-1, INPUT, DOWN);
809 PIN_SLP(gpk2-2, INPUT, DOWN);
810 PIN_SLP(gpk2-3, INPUT, DOWN);
811 PIN_SLP(gpk2-4, INPUT, DOWN);
812 PIN_SLP(gpk2-5, INPUT, DOWN);
813 PIN_SLP(gpk2-6, INPUT, DOWN);
815 PIN_SLP(gpl0-0, INPUT, DOWN);
816 PIN_SLP(gpl0-1, INPUT, DOWN);
817 PIN_SLP(gpl0-2, INPUT, DOWN);
818 PIN_SLP(gpl0-3, INPUT, DOWN);
820 PIN_SLP(gpm0-0, INPUT, DOWN);
821 PIN_SLP(gpm0-1, INPUT, DOWN);
822 PIN_SLP(gpm0-2, INPUT, DOWN);
823 PIN_SLP(gpm0-3, INPUT, DOWN);
824 PIN_SLP(gpm0-4, INPUT, DOWN);
825 PIN_SLP(gpm0-5, INPUT, DOWN);
826 PIN_SLP(gpm0-6, INPUT, DOWN);
827 PIN_SLP(gpm0-7, INPUT, DOWN);
829 PIN_SLP(gpm1-0, INPUT, DOWN);
830 PIN_SLP(gpm1-1, INPUT, DOWN);
831 PIN_SLP(gpm1-2, INPUT, DOWN);
832 PIN_SLP(gpm1-3, INPUT, DOWN);
833 PIN_SLP(gpm1-4, INPUT, DOWN);
834 PIN_SLP(gpm1-5, INPUT, DOWN);
835 PIN_SLP(gpm1-6, INPUT, DOWN);
837 PIN_SLP(gpm2-0, INPUT, DOWN);
838 PIN_SLP(gpm2-1, INPUT, DOWN);
839 PIN_SLP(gpm2-2, INPUT, DOWN);
840 PIN_SLP(gpm2-3, INPUT, DOWN);
841 PIN_SLP(gpm2-4, INPUT, DOWN);
843 PIN_SLP(gpm3-0, INPUT, DOWN);
844 PIN_SLP(gpm3-1, INPUT, DOWN);
845 PIN_SLP(gpm3-2, INPUT, DOWN);
846 PIN_SLP(gpm3-3, INPUT, DOWN);
847 PIN_SLP(gpm3-4, INPUT, DOWN);
848 PIN_SLP(gpm3-5, INPUT, DOWN);
849 PIN_SLP(gpm3-6, INPUT, DOWN);
850 PIN_SLP(gpm3-7, INPUT, DOWN);
852 PIN_SLP(gpm4-0, INPUT, DOWN);
853 PIN_SLP(gpm4-1, INPUT, DOWN);
854 PIN_SLP(gpm4-2, INPUT, DOWN);
855 PIN_SLP(gpm4-3, INPUT, DOWN);
856 PIN_SLP(gpm4-4, INPUT, DOWN);
857 PIN_SLP(gpm4-5, INPUT, DOWN);
858 PIN_SLP(gpm4-6, INPUT, DOWN);
859 PIN_SLP(gpm4-7, INPUT, DOWN);