1 // SPDX-License-Identifier: GPL-2.0
3 * Samsung's Exynos4412 based Trats 2 board device tree source
5 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
6 * http://www.samsung.com
8 * Device tree source file for Samsung's Trats 2 board which is based on
9 * Samsung's Exynos4412 SoC.
13 #include "exynos4412.dtsi"
14 #include "exynos4412-ppmu-common.dtsi"
15 #include <dt-bindings/gpio/gpio.h>
16 #include <dt-bindings/interrupt-controller/irq.h>
17 #include <dt-bindings/clock/maxim,max77686.h>
18 #include <dt-bindings/pinctrl/samsung.h>
21 compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
24 i2c11 = &i2c_max77693;
25 i2c12 = &i2c_max77693_fuel;
29 stdout-path = &serial_2;
33 compatible = "samsung,secure-firmware";
34 reg = <0x0204F000 0x1000>;
39 compatible = "samsung,clock-xxti", "fixed-clock";
40 clock-frequency = <0>;
44 compatible = "samsung,clock-xusbxti", "fixed-clock";
45 clock-frequency = <24000000>;
49 cam_io_reg: voltage-regulator-1 {
50 compatible = "regulator-fixed";
51 regulator-name = "CAM_SENSOR_A";
52 regulator-min-microvolt = <2800000>;
53 regulator-max-microvolt = <2800000>;
58 cam_af_reg: voltage-regulator-2 {
59 compatible = "regulator-fixed";
60 regulator-name = "CAM_AF";
61 regulator-min-microvolt = <2800000>;
62 regulator-max-microvolt = <2800000>;
67 vsil12: voltage-regulator-3 {
68 compatible = "regulator-fixed";
69 regulator-name = "VSIL_1.2V";
70 regulator-min-microvolt = <1200000>;
71 regulator-max-microvolt = <1200000>;
72 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
74 vin-supply = <&buck7_reg>;
77 vcc33mhl: voltage-regulator-4 {
78 compatible = "regulator-fixed";
79 regulator-name = "VCC_3.3_MHL";
80 regulator-min-microvolt = <3300000>;
81 regulator-max-microvolt = <3300000>;
82 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
86 vcc18mhl: voltage-regulator-5 {
87 compatible = "regulator-fixed";
88 regulator-name = "VCC_1.8_MHL";
89 regulator-min-microvolt = <1800000>;
90 regulator-max-microvolt = <1800000>;
91 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
96 compatible = "gpio-keys";
99 gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
101 label = "volume down";
102 debounce-interval = <10>;
106 gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
109 debounce-interval = <10>;
113 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
116 debounce-interval = <10>;
121 gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
124 debounce-interval = <10>;
129 i2c_max77693: i2c-gpio-1 {
130 compatible = "i2c-gpio";
131 gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
132 i2c-gpio,delay-us = <2>;
133 #address-cells = <1>;
138 compatible = "maxim,max77693";
139 interrupt-parent = <&gpx1>;
140 interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
144 esafeout1_reg: ESAFEOUT1 {
145 regulator-name = "ESAFEOUT1";
147 esafeout2_reg: ESAFEOUT2 {
148 regulator-name = "ESAFEOUT2";
150 charger_reg: CHARGER {
151 regulator-name = "CHARGER";
152 regulator-min-microamp = <60000>;
153 regulator-max-microamp = <2580000>;
158 compatible = "maxim,max77693-haptic";
159 haptic-supply = <&ldo26_reg>;
160 pwms = <&pwm 0 38022 0>;
164 compatible = "maxim,max77693-charger";
166 maxim,constant-microvolt = <4350000>;
167 maxim,min-system-microvolt = <3600000>;
168 maxim,thermal-regulation-celsius = <100>;
169 maxim,battery-overcurrent-microamp = <3500000>;
170 maxim,charge-input-threshold-microvolt = <4300000>;
175 i2c_max77693_fuel: i2c-gpio-3 {
176 compatible = "i2c-gpio";
177 gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
178 i2c-gpio,delay-us = <2>;
179 #address-cells = <1>;
183 max77693-fuel-gauge@36 {
184 compatible = "maxim,max17047";
185 interrupt-parent = <&gpx2>;
186 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
189 maxim,over-heat-temp = <700>;
190 maxim,over-volt = <4500>;
195 compatible = "i2c-gpio";
196 gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>;
197 i2c-gpio,delay-us = <100>;
198 #address-cells = <1>;
201 pinctrl-0 = <&i2c_mhl_bus>;
202 pinctrl-names = "default";
205 sii9234: hdmi-bridge@39 {
206 compatible = "sil,sii9234";
207 avcc33-supply = <&vcc33mhl>;
208 iovcc18-supply = <&vcc18mhl>;
209 avcc12-supply = <&vsil12>;
210 cvcc12-supply = <&vsil12>;
211 reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
212 interrupt-parent = <&gpf3>;
213 interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
217 mhl_to_hdmi: endpoint {
218 remote-endpoint = <&hdmi_to_mhl>;
224 wlan_pwrseq: sdhci3-pwrseq {
225 compatible = "mmc-pwrseq-simple";
226 reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>;
227 clocks = <&max77686 MAX77686_CLK_PMIC>;
228 clock-names = "ext_clock";
232 compatible = "samsung,trats2-audio";
233 samsung,i2s-controller = <&i2s0>;
234 samsung,model = "Trats2";
235 samsung,audio-codec = <&wm1811>;
236 samsung,audio-routing =
244 compatible = "murata,ncp15wb473";
245 pullup-uv = <1800000>; /* VCC_1.8V_AP */
246 pullup-ohm = <100000>; /* 100K */
247 pulldown-ohm = <100000>; /* 100K */
248 io-channels = <&adc 1>; /* AP temperature */
252 compatible = "murata,ncp15wb473";
253 pullup-uv = <1800000>; /* VCC_1.8V_AP */
254 pullup-ohm = <100000>; /* 100K */
255 pulldown-ohm = <100000>; /* 100K */
256 io-channels = <&adc 2>; /* Battery temperature */
260 cpu_thermal: cpu-thermal {
263 /* Corresponds to 800MHz at freq_table */
264 cooling-device = <&cpu0 7 7>;
267 /* Corresponds to 200MHz at freq_table */
268 cooling-device = <&cpu0 13 13>;
276 vdd-supply = <&ldo3_reg>;
281 devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
282 vdd-supply = <&buck1_reg>;
287 devfreq = <&bus_dmc>;
292 devfreq = <&bus_dmc>;
297 devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
298 vdd-supply = <&buck3_reg>;
303 devfreq = <&bus_leftbus>;
308 devfreq = <&bus_leftbus>;
313 devfreq = <&bus_leftbus>;
318 devfreq = <&bus_leftbus>;
323 devfreq = <&bus_leftbus>;
328 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
329 pinctrl-names = "default";
331 assigned-clocks = <&clock CLK_MOUT_CAM0>,
332 <&clock CLK_MOUT_CAM1>;
333 assigned-clock-parents = <&clock CLK_XUSBXTI>,
334 <&clock CLK_XUSBXTI>;
338 cpu0-supply = <&buck2_reg>;
343 vddcore-supply = <&ldo8_reg>;
344 vddio-supply = <&ldo10_reg>;
345 assigned-clocks = <&clock CLK_MOUT_CSIS0>,
346 <&clock CLK_SCLK_CSIS0>;
347 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
348 assigned-clock-rates = <0>, <176000000>;
350 /* Camera C (3) MIPI CSI-2 (CSIS0) */
354 remote-endpoint = <&s5c73m3_ep>;
355 data-lanes = <1 2 3 4>;
356 samsung,csis-hs-settle = <12>;
363 vddcore-supply = <&ldo8_reg>;
364 vddio-supply = <&ldo10_reg>;
365 assigned-clocks = <&clock CLK_MOUT_CSIS1>,
366 <&clock CLK_SCLK_CSIS1>;
367 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
368 assigned-clock-rates = <0>, <176000000>;
370 /* Camera D (4) MIPI CSI-2 (CSIS1) */
374 remote-endpoint = <&is_s5k6a3_ep>;
376 samsung,csis-hs-settle = <18>;
383 vddcore-supply = <&ldo8_reg>;
384 vddio-supply = <&ldo10_reg>;
385 samsung,burst-clock-frequency = <500000000>;
386 samsung,esc-clock-frequency = <20000000>;
387 samsung,pll-clock-frequency = <24000000>;
391 vbus-supply = <&esafeout1_reg>;
397 assigned-clocks = <&clock CLK_MOUT_FIMC0>,
398 <&clock CLK_SCLK_FIMC0>;
399 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
400 assigned-clock-rates = <0>, <176000000>;
405 assigned-clocks = <&clock CLK_MOUT_FIMC1>,
406 <&clock CLK_SCLK_FIMC1>;
407 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
408 assigned-clock-rates = <0>, <176000000>;
413 assigned-clocks = <&clock CLK_MOUT_FIMC2>,
414 <&clock CLK_SCLK_FIMC2>;
415 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
416 assigned-clock-rates = <0>, <176000000>;
421 assigned-clocks = <&clock CLK_MOUT_FIMC3>,
422 <&clock CLK_SCLK_FIMC3>;
423 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
424 assigned-clock-rates = <0>, <176000000>;
428 pinctrl-0 = <&fimc_is_uart>;
429 pinctrl-names = "default";
447 hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
448 pinctrl-names = "default";
449 pinctrl-0 = <&hdmi_hpd>;
450 vdd-supply = <&ldo3_reg>;
451 vdd_osc-supply = <&ldo4_reg>;
452 vdd_pll-supply = <&ldo3_reg>;
457 #address-cells = <1>;
462 hdmi_to_mhl: endpoint {
463 remote-endpoint = <&mhl_to_hdmi>;
470 vusb_d-supply = <&ldo15_reg>;
471 vusb_a-supply = <&ldo12_reg>;
472 dr_mode = "peripheral";
477 samsung,i2c-sda-delay = <100>;
478 samsung,i2c-slave-addr = <0x10>;
479 samsung,i2c-max-bus-freq = <400000>;
480 pinctrl-0 = <&i2c0_bus>;
481 pinctrl-names = "default";
484 s5c73m3: s5c73m3@3c {
485 compatible = "samsung,s5c73m3";
487 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
488 vdd-int-supply = <&buck9_reg>;
489 vddio-cis-supply = <&ldo9_reg>;
490 vddio-host-supply = <&ldo18_reg>;
491 vdd-af-supply = <&cam_af_reg>;
492 vdd-reg-supply = <&cam_io_reg>;
493 clock-frequency = <24000000>;
495 clocks = <&camera 0>;
496 clock-names = "cis_extclk";
499 s5c73m3_ep: endpoint {
500 remote-endpoint = <&csis0_ep>;
501 data-lanes = <1 2 3 4>;
508 pinctrl-0 = <&fimc_is_i2c1>;
509 pinctrl-names = "default";
512 compatible = "samsung,s5k6a3";
514 svdda-supply = <&cam_io_reg>;
515 svddio-supply = <&ldo19_reg>;
516 afvdd-supply = <&ldo19_reg>;
517 clock-frequency = <24000000>;
519 clocks = <&camera 1>;
520 clock-names = "extclk";
521 samsung,camclk-out = <1>;
522 gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
525 is_s5k6a3_ep: endpoint {
526 remote-endpoint = <&csis1_ep>;
534 samsung,i2c-sda-delay = <100>;
535 samsung,i2c-slave-addr = <0x10>;
536 samsung,i2c-max-bus-freq = <400000>;
537 pinctrl-0 = <&i2c3_bus>;
538 pinctrl-names = "default";
543 samsung,i2c-sda-delay = <100>;
544 samsung,i2c-slave-addr = <0x10>;
545 samsung,i2c-max-bus-freq = <100000>;
546 pinctrl-0 = <&i2c4_bus>;
547 pinctrl-names = "default";
551 compatible = "wlf,wm1811";
553 clocks = <&pmu_system_controller 0>;
554 clock-names = "MCLK1";
555 DCVDD-supply = <&ldo3_reg>;
556 DBVDD1-supply = <&ldo3_reg>;
557 wlf,ldo1ena = <&gpj0 4 0>;
566 samsung,i2c-sda-delay = <100>;
567 samsung,i2c-slave-addr = <0x10>;
568 samsung,i2c-max-bus-freq = <100000>;
569 pinctrl-0 = <&i2c7_bus>;
570 pinctrl-names = "default";
573 max77686: max77686_pmic@9 {
574 compatible = "maxim,max77686";
575 interrupt-parent = <&gpx0>;
576 interrupts = <7 IRQ_TYPE_NONE>;
582 regulator-name = "VALIVE_1.0V_AP";
583 regulator-min-microvolt = <1000000>;
584 regulator-max-microvolt = <1000000>;
589 regulator-name = "VM1M2_1.2V_AP";
590 regulator-min-microvolt = <1200000>;
591 regulator-max-microvolt = <1200000>;
593 regulator-state-mem {
594 regulator-on-in-suspend;
599 regulator-name = "VCC_1.8V_AP";
600 regulator-min-microvolt = <1800000>;
601 regulator-max-microvolt = <1800000>;
606 regulator-name = "VCC_2.8V_AP";
607 regulator-min-microvolt = <2800000>;
608 regulator-max-microvolt = <2800000>;
613 regulator-name = "VCC_1.8V_IO";
614 regulator-min-microvolt = <1800000>;
615 regulator-max-microvolt = <1800000>;
620 regulator-name = "VMPLL_1.0V_AP";
621 regulator-min-microvolt = <1000000>;
622 regulator-max-microvolt = <1000000>;
624 regulator-state-mem {
625 regulator-on-in-suspend;
630 regulator-name = "VPLL_1.0V_AP";
631 regulator-min-microvolt = <1000000>;
632 regulator-max-microvolt = <1000000>;
634 regulator-state-mem {
635 regulator-on-in-suspend;
640 regulator-name = "VMIPI_1.0V";
641 regulator-min-microvolt = <1000000>;
642 regulator-max-microvolt = <1000000>;
643 regulator-state-mem {
644 regulator-off-in-suspend;
649 regulator-name = "CAM_ISP_MIPI_1.2V";
650 regulator-min-microvolt = <1200000>;
651 regulator-max-microvolt = <1200000>;
655 regulator-name = "VMIPI_1.8V";
656 regulator-min-microvolt = <1800000>;
657 regulator-max-microvolt = <1800000>;
658 regulator-state-mem {
659 regulator-off-in-suspend;
664 regulator-name = "VABB1_1.95V";
665 regulator-min-microvolt = <1950000>;
666 regulator-max-microvolt = <1950000>;
668 regulator-state-mem {
669 regulator-off-in-suspend;
674 regulator-name = "VUOTG_3.0V";
675 regulator-min-microvolt = <3000000>;
676 regulator-max-microvolt = <3000000>;
677 regulator-state-mem {
678 regulator-off-in-suspend;
683 regulator-name = "NFC_AVDD_1.8V";
684 regulator-min-microvolt = <1800000>;
685 regulator-max-microvolt = <1800000>;
689 regulator-name = "VABB2_1.95V";
690 regulator-min-microvolt = <1950000>;
691 regulator-max-microvolt = <1950000>;
693 regulator-state-mem {
694 regulator-off-in-suspend;
699 regulator-name = "VHSIC_1.0V";
700 regulator-min-microvolt = <1000000>;
701 regulator-max-microvolt = <1000000>;
702 regulator-state-mem {
703 regulator-on-in-suspend;
708 regulator-name = "VHSIC_1.8V";
709 regulator-min-microvolt = <1800000>;
710 regulator-max-microvolt = <1800000>;
711 regulator-state-mem {
712 regulator-on-in-suspend;
717 regulator-name = "CAM_SENSOR_CORE_1.2V";
718 regulator-min-microvolt = <1200000>;
719 regulator-max-microvolt = <1200000>;
723 regulator-name = "CAM_ISP_SEN_IO_1.8V";
724 regulator-min-microvolt = <1800000>;
725 regulator-max-microvolt = <1800000>;
729 regulator-name = "VT_CAM_1.8V";
730 regulator-min-microvolt = <1800000>;
731 regulator-max-microvolt = <1800000>;
735 regulator-name = "VDDQ_PRE_1.8V";
736 regulator-min-microvolt = <1800000>;
737 regulator-max-microvolt = <1800000>;
741 regulator-name = "VTF_2.8V";
742 regulator-min-microvolt = <2800000>;
743 regulator-max-microvolt = <2800000>;
744 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
748 regulator-name = "VMEM_VDD_2.8V";
749 regulator-min-microvolt = <2800000>;
750 regulator-max-microvolt = <2800000>;
751 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
755 regulator-name = "TSP_AVDD_3.3V";
756 regulator-min-microvolt = <3300000>;
757 regulator-max-microvolt = <3300000>;
761 regulator-name = "TSP_VDD_1.8V";
762 regulator-min-microvolt = <1800000>;
763 regulator-max-microvolt = <1800000>;
767 regulator-name = "LDO25";
771 regulator-name = "MOTOR_VCC_3.0V";
772 regulator-min-microvolt = <3000000>;
773 regulator-max-microvolt = <3000000>;
777 regulator-name = "vdd_mif";
778 regulator-min-microvolt = <850000>;
779 regulator-max-microvolt = <1100000>;
782 regulator-state-mem {
783 regulator-off-in-suspend;
788 regulator-name = "vdd_arm";
789 regulator-min-microvolt = <850000>;
790 regulator-max-microvolt = <1500000>;
793 regulator-state-mem {
794 regulator-on-in-suspend;
799 regulator-name = "vdd_int";
800 regulator-min-microvolt = <850000>;
801 regulator-max-microvolt = <1150000>;
804 regulator-state-mem {
805 regulator-off-in-suspend;
810 regulator-name = "vdd_g3d";
811 regulator-min-microvolt = <850000>;
812 regulator-max-microvolt = <1150000>;
814 regulator-state-mem {
815 regulator-off-in-suspend;
820 regulator-name = "VMEM_1.2V_AP";
821 regulator-min-microvolt = <1200000>;
822 regulator-max-microvolt = <1200000>;
827 regulator-name = "VCC_SUB_1.35V";
828 regulator-min-microvolt = <1350000>;
829 regulator-max-microvolt = <1350000>;
834 regulator-name = "VCC_SUB_2.0V";
835 regulator-min-microvolt = <2000000>;
836 regulator-max-microvolt = <2000000>;
841 regulator-name = "VMEM_VDDF_3.0V";
842 regulator-min-microvolt = <2850000>;
843 regulator-max-microvolt = <2850000>;
844 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
848 regulator-name = "CAM_ISP_CORE_1.2V";
849 regulator-min-microvolt = <1000000>;
850 regulator-max-microvolt = <1200000>;
861 pinctrl-0 = <&i2s0_bus>;
862 pinctrl-names = "default";
873 card-detect-delay = <200>;
874 vmmc-supply = <&ldo22_reg>;
875 clock-frequency = <400000000>;
876 samsung,dw-mshc-ciu-div = <0>;
877 samsung,dw-mshc-sdr-timing = <2 3>;
878 samsung,dw-mshc-ddr-timing = <1 2>;
879 pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
880 pinctrl-names = "default";
886 &pmu_system_controller {
887 assigned-clocks = <&pmu_system_controller 0>;
888 assigned-clock-parents = <&clock CLK_XUSBXTI>;
892 pinctrl-names = "default";
893 pinctrl-0 = <&sleep0>;
896 samsung,pins = "gpf3-5";
897 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
900 i2c_mhl_bus: i2c-mhl-bus {
901 samsung,pins = "gpf0-4", "gpf0-6";
902 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
903 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
904 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
907 sleep0: sleep-states {
908 PIN_SLP(gpa0-0, INPUT, NONE);
909 PIN_SLP(gpa0-1, OUT0, NONE);
910 PIN_SLP(gpa0-2, INPUT, NONE);
911 PIN_SLP(gpa0-3, INPUT, UP);
912 PIN_SLP(gpa0-4, INPUT, NONE);
913 PIN_SLP(gpa0-5, INPUT, DOWN);
914 PIN_SLP(gpa0-6, INPUT, DOWN);
915 PIN_SLP(gpa0-7, INPUT, UP);
917 PIN_SLP(gpa1-0, INPUT, DOWN);
918 PIN_SLP(gpa1-1, INPUT, DOWN);
919 PIN_SLP(gpa1-2, INPUT, DOWN);
920 PIN_SLP(gpa1-3, INPUT, DOWN);
921 PIN_SLP(gpa1-4, INPUT, DOWN);
922 PIN_SLP(gpa1-5, INPUT, DOWN);
924 PIN_SLP(gpb-0, INPUT, NONE);
925 PIN_SLP(gpb-1, INPUT, NONE);
926 PIN_SLP(gpb-2, INPUT, NONE);
927 PIN_SLP(gpb-3, INPUT, NONE);
928 PIN_SLP(gpb-4, INPUT, DOWN);
929 PIN_SLP(gpb-5, INPUT, UP);
930 PIN_SLP(gpb-6, INPUT, DOWN);
931 PIN_SLP(gpb-7, INPUT, DOWN);
933 PIN_SLP(gpc0-0, INPUT, DOWN);
934 PIN_SLP(gpc0-1, INPUT, DOWN);
935 PIN_SLP(gpc0-2, INPUT, DOWN);
936 PIN_SLP(gpc0-3, INPUT, DOWN);
937 PIN_SLP(gpc0-4, INPUT, DOWN);
939 PIN_SLP(gpc1-0, INPUT, NONE);
940 PIN_SLP(gpc1-1, PREV, NONE);
941 PIN_SLP(gpc1-2, INPUT, NONE);
942 PIN_SLP(gpc1-3, INPUT, NONE);
943 PIN_SLP(gpc1-4, INPUT, NONE);
945 PIN_SLP(gpd0-0, INPUT, DOWN);
946 PIN_SLP(gpd0-1, INPUT, DOWN);
947 PIN_SLP(gpd0-2, INPUT, NONE);
948 PIN_SLP(gpd0-3, INPUT, NONE);
950 PIN_SLP(gpd1-0, INPUT, DOWN);
951 PIN_SLP(gpd1-1, INPUT, DOWN);
952 PIN_SLP(gpd1-2, INPUT, NONE);
953 PIN_SLP(gpd1-3, INPUT, NONE);
955 PIN_SLP(gpf0-0, INPUT, NONE);
956 PIN_SLP(gpf0-1, INPUT, NONE);
957 PIN_SLP(gpf0-2, INPUT, DOWN);
958 PIN_SLP(gpf0-3, INPUT, DOWN);
959 PIN_SLP(gpf0-4, INPUT, NONE);
960 PIN_SLP(gpf0-5, INPUT, DOWN);
961 PIN_SLP(gpf0-6, INPUT, NONE);
962 PIN_SLP(gpf0-7, INPUT, DOWN);
964 PIN_SLP(gpf1-0, INPUT, DOWN);
965 PIN_SLP(gpf1-1, INPUT, DOWN);
966 PIN_SLP(gpf1-2, INPUT, DOWN);
967 PIN_SLP(gpf1-3, INPUT, DOWN);
968 PIN_SLP(gpf1-4, INPUT, NONE);
969 PIN_SLP(gpf1-5, INPUT, NONE);
970 PIN_SLP(gpf1-6, INPUT, DOWN);
971 PIN_SLP(gpf1-7, PREV, NONE);
973 PIN_SLP(gpf2-0, PREV, NONE);
974 PIN_SLP(gpf2-1, INPUT, DOWN);
975 PIN_SLP(gpf2-2, INPUT, DOWN);
976 PIN_SLP(gpf2-3, INPUT, DOWN);
977 PIN_SLP(gpf2-4, INPUT, DOWN);
978 PIN_SLP(gpf2-5, INPUT, DOWN);
979 PIN_SLP(gpf2-6, INPUT, NONE);
980 PIN_SLP(gpf2-7, INPUT, NONE);
982 PIN_SLP(gpf3-0, INPUT, NONE);
983 PIN_SLP(gpf3-1, PREV, NONE);
984 PIN_SLP(gpf3-2, PREV, NONE);
985 PIN_SLP(gpf3-3, PREV, NONE);
986 PIN_SLP(gpf3-4, OUT1, NONE);
987 PIN_SLP(gpf3-5, INPUT, DOWN);
989 PIN_SLP(gpj0-0, PREV, NONE);
990 PIN_SLP(gpj0-1, PREV, NONE);
991 PIN_SLP(gpj0-2, PREV, NONE);
992 PIN_SLP(gpj0-3, INPUT, DOWN);
993 PIN_SLP(gpj0-4, PREV, NONE);
994 PIN_SLP(gpj0-5, PREV, NONE);
995 PIN_SLP(gpj0-6, INPUT, DOWN);
996 PIN_SLP(gpj0-7, INPUT, DOWN);
998 PIN_SLP(gpj1-0, INPUT, DOWN);
999 PIN_SLP(gpj1-1, PREV, NONE);
1000 PIN_SLP(gpj1-2, PREV, NONE);
1001 PIN_SLP(gpj1-3, INPUT, DOWN);
1002 PIN_SLP(gpj1-4, INPUT, DOWN);
1007 pinctrl-names = "default";
1008 pinctrl-0 = <&sleep1>;
1010 hdmi_hpd: hdmi-hpd {
1011 samsung,pins = "gpx3-7";
1012 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
1015 sleep1: sleep-states {
1016 PIN_SLP(gpk0-0, PREV, NONE);
1017 PIN_SLP(gpk0-1, PREV, NONE);
1018 PIN_SLP(gpk0-2, OUT0, NONE);
1019 PIN_SLP(gpk0-3, PREV, NONE);
1020 PIN_SLP(gpk0-4, PREV, NONE);
1021 PIN_SLP(gpk0-5, PREV, NONE);
1022 PIN_SLP(gpk0-6, PREV, NONE);
1024 PIN_SLP(gpk1-0, INPUT, DOWN);
1025 PIN_SLP(gpk1-1, INPUT, DOWN);
1026 PIN_SLP(gpk1-2, INPUT, DOWN);
1027 PIN_SLP(gpk1-3, PREV, NONE);
1028 PIN_SLP(gpk1-4, PREV, NONE);
1029 PIN_SLP(gpk1-5, PREV, NONE);
1030 PIN_SLP(gpk1-6, PREV, NONE);
1032 PIN_SLP(gpk2-0, INPUT, DOWN);
1033 PIN_SLP(gpk2-1, INPUT, DOWN);
1034 PIN_SLP(gpk2-2, INPUT, DOWN);
1035 PIN_SLP(gpk2-3, INPUT, DOWN);
1036 PIN_SLP(gpk2-4, INPUT, DOWN);
1037 PIN_SLP(gpk2-5, INPUT, DOWN);
1038 PIN_SLP(gpk2-6, INPUT, DOWN);
1040 PIN_SLP(gpk3-0, OUT0, NONE);
1041 PIN_SLP(gpk3-1, INPUT, NONE);
1042 PIN_SLP(gpk3-2, INPUT, DOWN);
1043 PIN_SLP(gpk3-3, INPUT, NONE);
1044 PIN_SLP(gpk3-4, INPUT, NONE);
1045 PIN_SLP(gpk3-5, INPUT, NONE);
1046 PIN_SLP(gpk3-6, INPUT, NONE);
1048 PIN_SLP(gpl0-0, INPUT, DOWN);
1049 PIN_SLP(gpl0-1, INPUT, DOWN);
1050 PIN_SLP(gpl0-2, INPUT, DOWN);
1051 PIN_SLP(gpl0-3, INPUT, DOWN);
1052 PIN_SLP(gpl0-4, PREV, NONE);
1053 PIN_SLP(gpl0-6, PREV, NONE);
1055 PIN_SLP(gpl1-0, INPUT, DOWN);
1056 PIN_SLP(gpl1-1, INPUT, DOWN);
1057 PIN_SLP(gpl2-0, INPUT, DOWN);
1058 PIN_SLP(gpl2-1, INPUT, DOWN);
1059 PIN_SLP(gpl2-2, INPUT, DOWN);
1060 PIN_SLP(gpl2-3, INPUT, DOWN);
1061 PIN_SLP(gpl2-4, INPUT, DOWN);
1062 PIN_SLP(gpl2-5, INPUT, DOWN);
1063 PIN_SLP(gpl2-6, PREV, NONE);
1064 PIN_SLP(gpl2-7, INPUT, DOWN);
1066 PIN_SLP(gpm0-0, INPUT, DOWN);
1067 PIN_SLP(gpm0-1, INPUT, DOWN);
1068 PIN_SLP(gpm0-2, INPUT, DOWN);
1069 PIN_SLP(gpm0-3, INPUT, DOWN);
1070 PIN_SLP(gpm0-4, INPUT, DOWN);
1071 PIN_SLP(gpm0-5, INPUT, DOWN);
1072 PIN_SLP(gpm0-6, INPUT, DOWN);
1073 PIN_SLP(gpm0-7, INPUT, DOWN);
1075 PIN_SLP(gpm1-0, INPUT, DOWN);
1076 PIN_SLP(gpm1-1, INPUT, DOWN);
1077 PIN_SLP(gpm1-2, INPUT, NONE);
1078 PIN_SLP(gpm1-3, INPUT, NONE);
1079 PIN_SLP(gpm1-4, INPUT, NONE);
1080 PIN_SLP(gpm1-5, INPUT, NONE);
1081 PIN_SLP(gpm1-6, INPUT, DOWN);
1083 PIN_SLP(gpm2-0, INPUT, NONE);
1084 PIN_SLP(gpm2-1, INPUT, NONE);
1085 PIN_SLP(gpm2-2, INPUT, DOWN);
1086 PIN_SLP(gpm2-3, INPUT, DOWN);
1087 PIN_SLP(gpm2-4, INPUT, DOWN);
1089 PIN_SLP(gpm3-0, PREV, NONE);
1090 PIN_SLP(gpm3-1, PREV, NONE);
1091 PIN_SLP(gpm3-2, PREV, NONE);
1092 PIN_SLP(gpm3-3, OUT1, NONE);
1093 PIN_SLP(gpm3-4, INPUT, DOWN);
1094 PIN_SLP(gpm3-5, INPUT, DOWN);
1095 PIN_SLP(gpm3-6, INPUT, DOWN);
1096 PIN_SLP(gpm3-7, INPUT, DOWN);
1098 PIN_SLP(gpm4-0, INPUT, DOWN);
1099 PIN_SLP(gpm4-1, INPUT, DOWN);
1100 PIN_SLP(gpm4-2, INPUT, DOWN);
1101 PIN_SLP(gpm4-3, INPUT, DOWN);
1102 PIN_SLP(gpm4-4, INPUT, DOWN);
1103 PIN_SLP(gpm4-5, INPUT, DOWN);
1104 PIN_SLP(gpm4-6, INPUT, DOWN);
1105 PIN_SLP(gpm4-7, INPUT, DOWN);
1107 PIN_SLP(gpy0-0, INPUT, DOWN);
1108 PIN_SLP(gpy0-1, INPUT, DOWN);
1109 PIN_SLP(gpy0-2, INPUT, DOWN);
1110 PIN_SLP(gpy0-3, INPUT, DOWN);
1111 PIN_SLP(gpy0-4, INPUT, DOWN);
1112 PIN_SLP(gpy0-5, INPUT, DOWN);
1114 PIN_SLP(gpy1-0, INPUT, DOWN);
1115 PIN_SLP(gpy1-1, INPUT, DOWN);
1116 PIN_SLP(gpy1-2, INPUT, DOWN);
1117 PIN_SLP(gpy1-3, INPUT, DOWN);
1119 PIN_SLP(gpy2-0, PREV, NONE);
1120 PIN_SLP(gpy2-1, INPUT, DOWN);
1121 PIN_SLP(gpy2-2, INPUT, NONE);
1122 PIN_SLP(gpy2-3, INPUT, NONE);
1123 PIN_SLP(gpy2-4, INPUT, NONE);
1124 PIN_SLP(gpy2-5, INPUT, NONE);
1126 PIN_SLP(gpy3-0, INPUT, DOWN);
1127 PIN_SLP(gpy3-1, INPUT, DOWN);
1128 PIN_SLP(gpy3-2, INPUT, DOWN);
1129 PIN_SLP(gpy3-3, INPUT, DOWN);
1130 PIN_SLP(gpy3-4, INPUT, DOWN);
1131 PIN_SLP(gpy3-5, INPUT, DOWN);
1132 PIN_SLP(gpy3-6, INPUT, DOWN);
1133 PIN_SLP(gpy3-7, INPUT, DOWN);
1135 PIN_SLP(gpy4-0, INPUT, DOWN);
1136 PIN_SLP(gpy4-1, INPUT, DOWN);
1137 PIN_SLP(gpy4-2, INPUT, DOWN);
1138 PIN_SLP(gpy4-3, INPUT, DOWN);
1139 PIN_SLP(gpy4-4, INPUT, DOWN);
1140 PIN_SLP(gpy4-5, INPUT, DOWN);
1141 PIN_SLP(gpy4-6, INPUT, DOWN);
1142 PIN_SLP(gpy4-7, INPUT, DOWN);
1144 PIN_SLP(gpy5-0, INPUT, DOWN);
1145 PIN_SLP(gpy5-1, INPUT, DOWN);
1146 PIN_SLP(gpy5-2, INPUT, DOWN);
1147 PIN_SLP(gpy5-3, INPUT, DOWN);
1148 PIN_SLP(gpy5-4, INPUT, DOWN);
1149 PIN_SLP(gpy5-5, INPUT, DOWN);
1150 PIN_SLP(gpy5-6, INPUT, DOWN);
1151 PIN_SLP(gpy5-7, INPUT, DOWN);
1153 PIN_SLP(gpy6-0, INPUT, DOWN);
1154 PIN_SLP(gpy6-1, INPUT, DOWN);
1155 PIN_SLP(gpy6-2, INPUT, DOWN);
1156 PIN_SLP(gpy6-3, INPUT, DOWN);
1157 PIN_SLP(gpy6-4, INPUT, DOWN);
1158 PIN_SLP(gpy6-5, INPUT, DOWN);
1159 PIN_SLP(gpy6-6, INPUT, DOWN);
1160 PIN_SLP(gpy6-7, INPUT, DOWN);
1165 pinctrl-names = "default";
1166 pinctrl-0 = <&sleep2>;
1168 sleep2: sleep-states {
1169 PIN_SLP(gpz-0, INPUT, DOWN);
1170 PIN_SLP(gpz-1, INPUT, DOWN);
1171 PIN_SLP(gpz-2, INPUT, DOWN);
1172 PIN_SLP(gpz-3, INPUT, DOWN);
1173 PIN_SLP(gpz-4, INPUT, DOWN);
1174 PIN_SLP(gpz-5, INPUT, DOWN);
1175 PIN_SLP(gpz-6, INPUT, DOWN);
1180 pinctrl-names = "default";
1181 pinctrl-0 = <&sleep3>;
1183 sleep3: sleep-states {
1184 PIN_SLP(gpv0-0, INPUT, DOWN);
1185 PIN_SLP(gpv0-1, INPUT, DOWN);
1186 PIN_SLP(gpv0-2, INPUT, DOWN);
1187 PIN_SLP(gpv0-3, INPUT, DOWN);
1188 PIN_SLP(gpv0-4, INPUT, DOWN);
1189 PIN_SLP(gpv0-5, INPUT, DOWN);
1190 PIN_SLP(gpv0-6, INPUT, DOWN);
1191 PIN_SLP(gpv0-7, INPUT, DOWN);
1193 PIN_SLP(gpv1-0, INPUT, DOWN);
1194 PIN_SLP(gpv1-1, INPUT, DOWN);
1195 PIN_SLP(gpv1-2, INPUT, DOWN);
1196 PIN_SLP(gpv1-3, INPUT, DOWN);
1197 PIN_SLP(gpv1-4, INPUT, DOWN);
1198 PIN_SLP(gpv1-5, INPUT, DOWN);
1199 PIN_SLP(gpv1-6, INPUT, DOWN);
1200 PIN_SLP(gpv1-7, INPUT, DOWN);
1202 PIN_SLP(gpv2-0, INPUT, DOWN);
1203 PIN_SLP(gpv2-1, INPUT, DOWN);
1204 PIN_SLP(gpv2-2, INPUT, DOWN);
1205 PIN_SLP(gpv2-3, INPUT, DOWN);
1206 PIN_SLP(gpv2-4, INPUT, DOWN);
1207 PIN_SLP(gpv2-5, INPUT, DOWN);
1208 PIN_SLP(gpv2-6, INPUT, DOWN);
1209 PIN_SLP(gpv2-7, INPUT, DOWN);
1211 PIN_SLP(gpv3-0, INPUT, DOWN);
1212 PIN_SLP(gpv3-1, INPUT, DOWN);
1213 PIN_SLP(gpv3-2, INPUT, DOWN);
1214 PIN_SLP(gpv3-3, INPUT, DOWN);
1215 PIN_SLP(gpv3-4, INPUT, DOWN);
1216 PIN_SLP(gpv3-5, INPUT, DOWN);
1217 PIN_SLP(gpv3-6, INPUT, DOWN);
1218 PIN_SLP(gpv3-7, INPUT, DOWN);
1220 PIN_SLP(gpv4-0, INPUT, DOWN);
1225 pinctrl-0 = <&pwm0_out>;
1226 pinctrl-names = "default";
1227 samsung,pwm-outputs = <0>;
1233 clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1234 clock-names = "rtc", "rtc_src";
1239 cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
1241 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
1242 pinctrl-names = "default";
1243 vmmc-supply = <&ldo21_reg>;
1248 #address-cells = <1>;
1253 mmc-pwrseq = <&wlan_pwrseq>;
1254 pinctrl-names = "default";
1255 pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
1260 compatible = "brcm,bcm4329-fmac";
1261 interrupt-parent = <&gpx2>;
1262 interrupts = <5 IRQ_TYPE_NONE>;
1263 interrupt-names = "host-wake";
1284 pinctrl-names = "default";
1285 pinctrl-0 = <&spi1_bus>;
1286 cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
1289 s5c73m3_spi: s5c73m3@0 {
1290 compatible = "samsung,s5c73m3";
1291 spi-max-frequency = <50000000>;
1294 samsung,spi-feedback-delay = <2>;
1300 vtmu-supply = <&ldo10_reg>;