sys/gnu/dts/arm/imx6qdl-gw52xx.dtsi

   1 /*
   2  * Copyright 2013 Gateworks Corporation
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include <dt-bindings/gpio/gpio.h>
  13
  14 / {
  15         /* these are used by bootloader for disabling nodes */
  16         aliases {
  17                 led0 = &led0;
  18                 led1 = &led1;
  19                 led2 = &led2;
  20                 nand = &gpmi;
  21                 ssi0 = &ssi1;
  22                 usb0 = &usbh1;
  23                 usb1 = &usbotg;
  24         };
  25
  26         chosen {
  27                 bootargs = "console=ttymxc1,115200";
  28         };
  29
  30         backlight {
  31                 compatible = "pwm-backlight";
  32                 pwms = <&pwm4 0 5000000>;
  33                 brightness-levels = <0 4 8 16 32 64 128 255>;
  34                 default-brightness-level = <7>;
  35         };
  36
  37         leds {
  38                 compatible = "gpio-leds";
  39                 pinctrl-names = "default";
  40                 pinctrl-0 = <&pinctrl_gpio_leds>;
  41
  42                 led0: user1 {
  43                         label = "user1";
  44                         gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
  45                         default-state = "on";
  46                         linux,default-trigger = "heartbeat";
  47                 };
  48
  49                 led1: user2 {
  50                         label = "user2";
  51                         gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
  52                         default-state = "off";
  53                 };
  54
  55                 led2: user3 {
  56                         label = "user3";
  57                         gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
  58                         default-state = "off";
  59                 };
  60         };
  61
  62         memory@10000000 {
  63                 device_type = "memory";
  64                 reg = <0x10000000 0x20000000>;
  65         };
  66
  67         pps {
  68                 compatible = "pps-gpio";
  69                 pinctrl-names = "default";
  70                 pinctrl-0 = <&pinctrl_pps>;
  71                 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
  72                 status = "okay";
  73         };
  74
  75         reg_1p0v: regulator-1p0v {
  76                 compatible = "regulator-fixed";
  77                 regulator-name = "1P0V";
  78                 regulator-min-microvolt = <1000000>;
  79                 regulator-max-microvolt = <1000000>;
  80                 regulator-always-on;
  81         };
  82
  83         reg_3p3v: regulator-3p3v {
  84                 compatible = "regulator-fixed";
  85                 regulator-name = "3P3V";
  86                 regulator-min-microvolt = <3300000>;
  87                 regulator-max-microvolt = <3300000>;
  88                 regulator-always-on;
  89         };
  90
  91         reg_5p0v: regulator-5p0v {
  92                 compatible = "regulator-fixed";
  93                 regulator-name = "5P0V";
  94                 regulator-min-microvolt = <5000000>;
  95                 regulator-max-microvolt = <5000000>;
  96                 regulator-always-on;
  97         };
  98
  99         reg_usb_otg_vbus: regulator-usb-otg-vbus {
 100                 compatible = "regulator-fixed";
 101                 regulator-name = "usb_otg_vbus";
 102                 regulator-min-microvolt = <5000000>;
 103                 regulator-max-microvolt = <5000000>;
 104                 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 105                 enable-active-high;
 106         };
 107
 108         sound {
 109                 compatible = "fsl,imx6q-ventana-sgtl5000",
 110                              "fsl,imx-audio-sgtl5000";
 111                 model = "sgtl5000-audio";
 112                 ssi-controller = <&ssi1>;
 113                 audio-codec = <&codec>;
 114                 audio-routing =
 115                         "MIC_IN", "Mic Jack",
 116                         "Mic Jack", "Mic Bias",
 117                         "Headphone Jack", "HP_OUT";
 118                 mux-int-port = <1>;
 119                 mux-ext-port = <4>;
 120         };
 121 };
 122
 123 &audmux {
 124         pinctrl-names = "default";
 125         pinctrl-0 = <&pinctrl_audmux>;
 126         status = "okay";
 127 };
 128
 129 &can1 {
 130         pinctrl-names = "default";
 131         pinctrl-0 = <&pinctrl_flexcan1>;
 132         status = "okay";
 133 };
 134
 135 &clks {
 136         assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
 137                           <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 138         assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
 139                                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 140 };
 141
 142 &ecspi3 {
 143         cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
 144         pinctrl-names = "default";
 145         pinctrl-0 = <&pinctrl_ecspi3>;
 146         status = "okay";
 147 };
 148
 149 &fec {
 150         pinctrl-names = "default";
 151         pinctrl-0 = <&pinctrl_enet>;
 152         phy-mode = "rgmii-id";
 153         phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 154         status = "okay";
 155 };
 156
 157 &gpmi {
 158         pinctrl-names = "default";
 159         pinctrl-0 = <&pinctrl_gpmi_nand>;
 160         status = "okay";
 161 };
 162
 163 &hdmi {
 164         ddc-i2c-bus = <&i2c3>;
 165         status = "okay";
 166 };
 167
 168 &i2c1 {
 169         clock-frequency = <100000>;
 170         pinctrl-names = "default";
 171         pinctrl-0 = <&pinctrl_i2c1>;
 172         status = "okay";
 173
 174         eeprom1: eeprom@50 {
 175                 compatible = "atmel,24c02";
 176                 reg = <0x50>;
 177                 pagesize = <16>;
 178         };
 179
 180         eeprom2: eeprom@51 {
 181                 compatible = "atmel,24c02";
 182                 reg = <0x51>;
 183                 pagesize = <16>;
 184         };
 185
 186         eeprom3: eeprom@52 {
 187                 compatible = "atmel,24c02";
 188                 reg = <0x52>;
 189                 pagesize = <16>;
 190         };
 191
 192         eeprom4: eeprom@53 {
 193                 compatible = "atmel,24c02";
 194                 reg = <0x53>;
 195                 pagesize = <16>;
 196         };
 197
 198         gpio: pca9555@23 {
 199                 compatible = "nxp,pca9555";
 200                 reg = <0x23>;
 201                 gpio-controller;
 202                 #gpio-cells = <2>;
 203         };
 204
 205         rtc: ds1672@68 {
 206                 compatible = "dallas,ds1672";
 207                 reg = <0x68>;
 208         };
 209 };
 210
 211 &i2c2 {
 212         clock-frequency = <100000>;
 213         pinctrl-names = "default";
 214         pinctrl-0 = <&pinctrl_i2c2>;
 215         status = "okay";
 216
 217         ltc3676: pmic@3c {
 218                 compatible = "lltc,ltc3676";
 219                 reg = <0x3c>;
 220                 pinctrl-names = "default";
 221                 pinctrl-0 = <&pinctrl_pmic>;
 222                 interrupt-parent = <&gpio1>;
 223                 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
 224
 225                 regulators {
 226                         /* VDD_SOC (1+R1/R2 = 1.635) */
 227                         reg_vdd_soc: sw1 {
 228                                 regulator-name = "vddsoc";
 229                                 regulator-min-microvolt = <674400>;
 230                                 regulator-max-microvolt = <1308000>;
 231                                 lltc,fb-voltage-divider = <127000 200000>;
 232                                 regulator-ramp-delay = <7000>;
 233                                 regulator-boot-on;
 234                                 regulator-always-on;
 235                         };
 236
 237                         /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
 238                         reg_1p8v: sw2 {
 239                                 regulator-name = "vdd1p8";
 240                                 regulator-min-microvolt = <1033310>;
 241                                 regulator-max-microvolt = <2004000>;
 242                                 lltc,fb-voltage-divider = <301000 200000>;
 243                                 regulator-ramp-delay = <7000>;
 244                                 regulator-boot-on;
 245                                 regulator-always-on;
 246                         };
 247
 248                         /* VDD_ARM (1+R1/R2 = 1.635) */
 249                         reg_vdd_arm: sw3 {
 250                                 regulator-name = "vddarm";
 251                                 regulator-min-microvolt = <674400>;
 252                                 regulator-max-microvolt = <1308000>;
 253                                 lltc,fb-voltage-divider = <127000 200000>;
 254                                 regulator-ramp-delay = <7000>;
 255                                 regulator-boot-on;
 256                                 regulator-always-on;
 257                         };
 258
 259                         /* VDD_DDR (1+R1/R2 = 2.105) */
 260                         reg_vdd_ddr: sw4 {
 261                                 regulator-name = "vddddr";
 262                                 regulator-min-microvolt = <868310>;
 263                                 regulator-max-microvolt = <1684000>;
 264                                 lltc,fb-voltage-divider = <221000 200000>;
 265                                 regulator-ramp-delay = <7000>;
 266                                 regulator-boot-on;
 267                                 regulator-always-on;
 268                         };
 269
 270                         /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
 271                         reg_2p5v: ldo2 {
 272                                 regulator-name = "vdd2p5";
 273                                 regulator-min-microvolt = <2490375>;
 274                                 regulator-max-microvolt = <2490375>;
 275                                 lltc,fb-voltage-divider = <487000 200000>;
 276                                 regulator-boot-on;
 277                                 regulator-always-on;
 278                         };
 279
 280                         /* VDD_AUD_1P8: Audio codec */
 281                         reg_aud_1p8v: ldo3 {
 282                                 regulator-name = "vdd1p8";
 283                                 regulator-min-microvolt = <1800000>;
 284                                 regulator-max-microvolt = <1800000>;
 285                                 regulator-boot-on;
 286                         };
 287
 288                         /* VDD_HIGH (1+R1/R2 = 4.17) */
 289                         reg_3p0v: ldo4 {
 290                                 regulator-name = "vdd3p0";
 291                                 regulator-min-microvolt = <3023250>;
 292                                 regulator-max-microvolt = <3023250>;
 293                                 lltc,fb-voltage-divider = <634000 200000>;
 294                                 regulator-boot-on;
 295                                 regulator-always-on;
 296                         };
 297                 };
 298         };
 299 };
 300
 301 &i2c3 {
 302         clock-frequency = <100000>;
 303         pinctrl-names = "default";
 304         pinctrl-0 = <&pinctrl_i2c3>;
 305         status = "okay";
 306
 307         codec: sgtl5000@a {
 308                 compatible = "fsl,sgtl5000";
 309                 reg = <0x0a>;
 310                 clocks = <&clks IMX6QDL_CLK_CKO>;
 311                 VDDA-supply = <&reg_1p8v>;
 312                 VDDIO-supply = <&reg_3p3v>;
 313         };
 314
 315         touchscreen: egalax_ts@4 {
 316                 compatible = "eeti,egalax_ts";
 317                 reg = <0x04>;
 318                 interrupt-parent = <&gpio7>;
 319                 interrupts = <12 2>;
 320                 wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 321         };
 322 };
 323
 324 &ldb {
 325         status = "okay";
 326
 327         lvds-channel@0 {
 328                 fsl,data-mapping = "spwg";
 329                 fsl,data-width = <18>;
 330                 status = "okay";
 331
 332                 display-timings {
 333                         native-mode = <&timing0>;
 334                         timing0: hsd100pxn1 {
 335                                 clock-frequency = <65000000>;
 336                                 hactive = <1024>;
 337                                 vactive = <768>;
 338                                 hback-porch = <220>;
 339                                 hfront-porch = <40>;
 340                                 vback-porch = <21>;
 341                                 vfront-porch = <7>;
 342                                 hsync-len = <60>;
 343                                 vsync-len = <10>;
 344                         };
 345                 };
 346         };
 347 };
 348
 349 &pcie {
 350         pinctrl-names = "default";
 351         pinctrl-0 = <&pinctrl_pcie>;
 352         reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
 353         status = "okay";
 354 };
 355
 356 &pwm2 {
 357         pinctrl-names = "default";
 358         pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
 359         status = "disabled";
 360 };
 361
 362 &pwm3 {
 363         pinctrl-names = "default";
 364         pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
 365         status = "disabled";
 366 };
 367
 368 &pwm4 {
 369         pinctrl-names = "default";
 370         pinctrl-0 = <&pinctrl_pwm4>;
 371         status = "okay";
 372 };
 373
 374 &ssi1 {
 375         status = "okay";
 376 };
 377
 378 &uart1 {
 379         pinctrl-names = "default";
 380         pinctrl-0 = <&pinctrl_uart1>;
 381         rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 382         status = "okay";
 383 };
 384
 385 &uart2 {
 386         pinctrl-names = "default";
 387         pinctrl-0 = <&pinctrl_uart2>;
 388         status = "okay";
 389 };
 390
 391 &uart5 {
 392         pinctrl-names = "default";
 393         pinctrl-0 = <&pinctrl_uart5>;
 394         status = "okay";
 395 };
 396
 397 &usbotg {
 398         vbus-supply = <&reg_usb_otg_vbus>;
 399         pinctrl-names = "default";
 400         pinctrl-0 = <&pinctrl_usbotg>;
 401         disable-over-current;
 402         status = "okay";
 403 };
 404
 405 &usbh1 {
 406         status = "okay";
 407 };
 408
 409 &usdhc3 {
 410         pinctrl-names = "default", "state_100mhz", "state_200mhz";
 411         pinctrl-0 = <&pinctrl_usdhc3>;
 412         pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 413         pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 414         cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 415         vmmc-supply = <&reg_3p3v>;
 416         no-1-8-v; /* firmware will remove if board revision supports */
 417         status = "okay";
 418 };
 419
 420 &wdog1 {
 421         pinctrl-names = "default";
 422         pinctrl-0 = <&pinctrl_wdog>;
 423         fsl,ext-reset-output;
 424 };
 425
 426 &iomuxc {
 427         pinctrl_audmux: audmuxgrp {
 428                 fsl,pins = <
 429                         MX6QDL_PAD_SD2_DAT0__AUD4_RXD           0x130b0
 430                         MX6QDL_PAD_SD2_DAT3__AUD4_TXC           0x130b0
 431                         MX6QDL_PAD_SD2_DAT2__AUD4_TXD           0x110b0
 432                         MX6QDL_PAD_SD2_DAT1__AUD4_TXFS          0x130b0
 433                         MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0 /* AUD4_MCK */
 434                 >;
 435         };
 436
 437         pinctrl_ecspi3: escpi3grp {
 438                 fsl,pins = <
 439                         MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK      0x100b1
 440                         MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI      0x100b1
 441                         MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO      0x100b1
 442                         MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24       0x100b1
 443                 >;
 444         };
 445
 446         pinctrl_enet: enetgrp {
 447                 fsl,pins = <
 448                         MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
 449                         MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
 450                         MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
 451                         MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
 452                         MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
 453                         MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
 454                         MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b030
 455                         MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b030
 456                         MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b030
 457                         MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b030
 458                         MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b030
 459                         MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b030
 460                         MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
 461                         MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 462                         MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 463                         MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
 464                         MX6QDL_PAD_ENET_TXD0__GPIO1_IO30        0x1b0b0 /* PHY Reset */
 465                 >;
 466         };
 467
 468         pinctrl_flexcan1: flexcan1grp {
 469                 fsl,pins = <
 470                         MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x1b0b1
 471                         MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX        0x1b0b1
 472                         MX6QDL_PAD_GPIO_9__GPIO1_IO09           0x4001b0b0 /* CAN_STBY */
 473                 >;
 474         };
 475
 476         pinctrl_gpio_leds: gpioledsgrp {
 477                 fsl,pins = <
 478                         MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x1b0b0
 479                         MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x1b0b0
 480                         MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x1b0b0
 481                 >;
 482         };
 483
 484         pinctrl_gpmi_nand: gpminandgrp {
 485                 fsl,pins = <
 486                         MX6QDL_PAD_NANDF_CLE__NAND_CLE          0xb0b1
 487                         MX6QDL_PAD_NANDF_ALE__NAND_ALE          0xb0b1
 488                         MX6QDL_PAD_NANDF_WP_B__NAND_WP_B        0xb0b1
 489                         MX6QDL_PAD_NANDF_RB0__NAND_READY_B      0xb000
 490                         MX6QDL_PAD_NANDF_CS0__NAND_CE0_B        0xb0b1
 491                         MX6QDL_PAD_SD4_CMD__NAND_RE_B           0xb0b1
 492                         MX6QDL_PAD_SD4_CLK__NAND_WE_B           0xb0b1
 493                         MX6QDL_PAD_NANDF_D0__NAND_DATA00        0xb0b1
 494                         MX6QDL_PAD_NANDF_D1__NAND_DATA01        0xb0b1
 495                         MX6QDL_PAD_NANDF_D2__NAND_DATA02        0xb0b1
 496                         MX6QDL_PAD_NANDF_D3__NAND_DATA03        0xb0b1
 497                         MX6QDL_PAD_NANDF_D4__NAND_DATA04        0xb0b1
 498                         MX6QDL_PAD_NANDF_D5__NAND_DATA05        0xb0b1
 499                         MX6QDL_PAD_NANDF_D6__NAND_DATA06        0xb0b1
 500                         MX6QDL_PAD_NANDF_D7__NAND_DATA07        0xb0b1
 501                 >;
 502         };
 503
 504         pinctrl_i2c1: i2c1grp {
 505                 fsl,pins = <
 506                         MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
 507                         MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
 508                 >;
 509         };
 510
 511         pinctrl_i2c2: i2c2grp {
 512                 fsl,pins = <
 513                         MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
 514                         MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 515                 >;
 516         };
 517
 518         pinctrl_i2c3: i2c3grp {
 519                 fsl,pins = <
 520                         MX6QDL_PAD_GPIO_3__I2C3_SCL             0x4001b8b1
 521                         MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
 522                 >;
 523         };
 524
 525         pinctrl_pcie: pciegrp {
 526                 fsl,pins = <
 527                         MX6QDL_PAD_ENET_TXD1__GPIO1_IO29        0x1b0b0 /* PCIE_RST# */
 528                 >;
 529         };
 530
 531         pinctrl_pmic: pmicgrp {
 532                 fsl,pins = <
 533                         MX6QDL_PAD_GPIO_8__GPIO1_IO08           0x0001b0b0 /* PMIC_IRQ# */
 534                 >;
 535         };
 536
 537         pinctrl_pps: ppsgrp {
 538                 fsl,pins = <
 539                         MX6QDL_PAD_ENET_RXD1__GPIO1_IO26        0x1b0b1
 540                 >;
 541         };
 542
 543         pinctrl_pwm2: pwm2grp {
 544                 fsl,pins = <
 545                         MX6QDL_PAD_SD1_DAT2__PWM2_OUT           0x1b0b1
 546                 >;
 547         };
 548
 549         pinctrl_pwm3: pwm3grp {
 550                 fsl,pins = <
 551                         MX6QDL_PAD_SD1_DAT1__PWM3_OUT           0x1b0b1
 552                 >;
 553         };
 554
 555         pinctrl_pwm4: pwm4grp {
 556                 fsl,pins = <
 557                         MX6QDL_PAD_SD1_CMD__PWM4_OUT            0x1b0b1
 558                 >;
 559         };
 560
 561         pinctrl_uart1: uart1grp {
 562                 fsl,pins = <
 563                         MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
 564                         MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
 565                         MX6QDL_PAD_SD3_DAT4__GPIO7_IO01         0x4001b0b1 /* TEN */
 566                 >;
 567         };
 568
 569         pinctrl_uart2: uart2grp {
 570                 fsl,pins = <
 571                         MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA      0x1b0b1
 572                         MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA      0x1b0b1
 573                 >;
 574         };
 575
 576         pinctrl_uart5: uart5grp {
 577                 fsl,pins = <
 578                         MX6QDL_PAD_KEY_COL1__UART5_TX_DATA      0x1b0b1
 579                         MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA      0x1b0b1
 580                 >;
 581         };
 582
 583         pinctrl_usbotg: usbotggrp {
 584                 fsl,pins = <
 585                         MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
 586                         MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1b0b0 /* OTG_PWR_EN */
 587                 >;
 588         };
 589
 590         pinctrl_usdhc3: usdhc3grp {
 591                 fsl,pins = <
 592                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 593                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 594                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 595                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 596                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 597                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 598                         MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x17059 /* CD */
 599                         MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x17059
 600                 >;
 601         };
 602
 603         pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
 604                 fsl,pins = <
 605                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x170b9
 606                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x170b9
 607                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x170b9
 608                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x170b9
 609                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x170b9
 610                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x170b9
 611                         MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x170b9 /* CD */
 612                         MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x170b9
 613                 >;
 614         };
 615
 616         pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
 617                 fsl,pins = <
 618                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x170f9
 619                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x100f9
 620                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x170f9
 621                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x170f9
 622                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x170f9
 623                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x170f9
 624                         MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x170f9 /* CD */
 625                         MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x170f9
 626                 >;
 627         };
 628
 629         pinctrl_wdog: wdoggrp {
 630                 fsl,pins = <
 631                         MX6QDL_PAD_DISP0_DAT8__WDOG1_B          0x1b0b0
 632                 >;
 633         };
 634 };