sys/gnu/dts/arm/imx6qdl-gw5904.dtsi

   1 /*
   2  * Copyright 2017 Gateworks Corporation
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License as
  11  *     published by the Free Software Foundation; either version 2 of
  12  *     the License, or (at your option) any later version.
  13  *
  14  *     This file is distributed in the hope that it will be useful,
  15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *     GNU General Public License for more details.
  18  *
  19  *     You should have received a copy of the GNU General Public
  20  *     License along with this file; if not, write to the Free
  21  *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
  22  *     MA 02110-1301 USA
  23  *
  24  * Or, alternatively,
  25  *
  26  *  b) Permission is hereby granted, free of charge, to any person
  27  *     obtaining a copy of this software and associated documentation
  28  *     files (the "Software"), to deal in the Software without
  29  *     restriction, including without limitation the rights to use,
  30  *     copy, modify, merge, publish, distribute, sublicense, and/or
  31  *     sell copies of the Software, and to permit persons to whom the
  32  *     Software is furnished to do so, subject to the following
  33  *     conditions:
  34  *
  35  *     The above copyright notice and this permission notice shall be
  36  *     included in all copies or substantial portions of the Software.
  37  *
  38  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  39  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  40  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  41  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  42  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  43  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  44  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  45  *     OTHER DEALINGS IN THE SOFTWARE.
  46  */
  47
  48 #include <dt-bindings/gpio/gpio.h>
  49
  50 / {
  51         /* these are used by bootloader for disabling nodes */
  52         aliases {
  53                 led0 = &led0;
  54                 led1 = &led1;
  55                 led2 = &led2;
  56                 usb0 = &usbh1;
  57                 usb1 = &usbotg;
  58         };
  59
  60         chosen {
  61                 stdout-path = &uart2;
  62         };
  63
  64         backlight {
  65                 compatible = "pwm-backlight";
  66                 pwms = <&pwm4 0 5000000>;
  67                 brightness-levels = <0 4 8 16 32 64 128 255>;
  68                 default-brightness-level = <7>;
  69         };
  70
  71         leds {
  72                 compatible = "gpio-leds";
  73                 pinctrl-names = "default";
  74                 pinctrl-0 = <&pinctrl_gpio_leds>;
  75
  76                 led0: user1 {
  77                         label = "user1";
  78                         gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
  79                         default-state = "on";
  80                         linux,default-trigger = "heartbeat";
  81                 };
  82
  83                 led1: user2 {
  84                         label = "user2";
  85                         gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
  86                         default-state = "off";
  87                 };
  88
  89                 led2: user3 {
  90                         label = "user3";
  91                         gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
  92                         default-state = "off";
  93                 };
  94         };
  95
  96         memory@10000000 {
  97                 reg = <0x10000000 0x40000000>;
  98         };
  99
 100         pps {
 101                 compatible = "pps-gpio";
 102                 pinctrl-names = "default";
 103                 pinctrl-0 = <&pinctrl_pps>;
 104                 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
 105         };
 106
 107         reg_1p0v: regulator-1p0v {
 108                 compatible = "regulator-fixed";
 109                 regulator-name = "1P0V";
 110                 regulator-min-microvolt = <1000000>;
 111                 regulator-max-microvolt = <1000000>;
 112                 regulator-always-on;
 113         };
 114
 115         reg_3p3v: regulator-3p3v {
 116                 compatible = "regulator-fixed";
 117                 regulator-name = "3P3V";
 118                 regulator-min-microvolt = <3300000>;
 119                 regulator-max-microvolt = <3300000>;
 120                 regulator-always-on;
 121         };
 122
 123         reg_usb_h1_vbus: regulator-usb-h1-vbus {
 124                 compatible = "regulator-fixed";
 125                 regulator-name = "usb_h1_vbus";
 126                 regulator-min-microvolt = <5000000>;
 127                 regulator-max-microvolt = <5000000>;
 128                 regulator-always-on;
 129         };
 130
 131         reg_usb_otg_vbus: regulator-usb-otg-vbus {
 132                 compatible = "regulator-fixed";
 133                 regulator-name = "usb_otg_vbus";
 134                 regulator-min-microvolt = <5000000>;
 135                 regulator-max-microvolt = <5000000>;
 136                 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 137                 enable-active-high;
 138         };
 139 };
 140
 141 &clks {
 142         assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
 143                           <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 144         assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
 145                                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 146 };
 147
 148 &fec {
 149         pinctrl-names = "default";
 150         pinctrl-0 = <&pinctrl_enet>;
 151         phy-mode = "rgmii-id";
 152         status = "okay";
 153
 154         fixed-link {
 155                 speed = <1000>;
 156                 full-duplex;
 157         };
 158
 159         mdio {
 160                 #address-cells = <1>;
 161                 #size-cells = <0>;
 162
 163                 switch@0 {
 164                         compatible = "marvell,mv88e6085";
 165                         reg = <0>;
 166
 167                         ports {
 168                                 #address-cells = <1>;
 169                                 #size-cells = <0>;
 170
 171                                 port@0 {
 172                                         reg = <0>;
 173                                         label = "lan4";
 174                                 };
 175
 176                                 port@1 {
 177                                         reg = <1>;
 178                                         label = "lan3";
 179                                 };
 180
 181                                 port@2 {
 182                                         reg = <2>;
 183                                         label = "lan2";
 184                                 };
 185
 186                                 port@3 {
 187                                         reg = <3>;
 188                                         label = "lan1";
 189                                 };
 190
 191                                 port@5 {
 192                                         reg = <5>;
 193                                         label = "cpu";
 194                                         ethernet = <&fec>;
 195                                 };
 196                         };
 197                 };
 198         };
 199 };
 200
 201 &i2c1 {
 202         clock-frequency = <100000>;
 203         pinctrl-names = "default";
 204         pinctrl-0 = <&pinctrl_i2c1>;
 205         status = "okay";
 206
 207         pca9555: gpio@23 {
 208                 compatible = "nxp,pca9555";
 209                 reg = <0x23>;
 210                 gpio-controller;
 211                 #gpio-cells = <2>;
 212         };
 213
 214         eeprom1: eeprom@50 {
 215                 compatible = "atmel,24c02";
 216                 reg = <0x50>;
 217                 pagesize = <16>;
 218         };
 219
 220         eeprom2: eeprom@51 {
 221                 compatible = "atmel,24c02";
 222                 reg = <0x51>;
 223                 pagesize = <16>;
 224         };
 225
 226         eeprom3: eeprom@52 {
 227                 compatible = "atmel,24c02";
 228                 reg = <0x52>;
 229                 pagesize = <16>;
 230         };
 231
 232         eeprom4: eeprom@53 {
 233                 compatible = "atmel,24c02";
 234                 reg = <0x53>;
 235                 pagesize = <16>;
 236         };
 237
 238         dts1672: rtc@68 {
 239                 compatible = "dallas,ds1672";
 240                 reg = <0x68>;
 241         };
 242 };
 243
 244 &i2c2 {
 245         clock-frequency = <100000>;
 246         pinctrl-names = "default";
 247         pinctrl-0 = <&pinctrl_i2c2>;
 248         status = "okay";
 249
 250         ltc3676: pmic@3c {
 251                 compatible = "lltc,ltc3676";
 252                 reg = <0x3c>;
 253                 interrupt-parent = <&gpio1>;
 254                 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
 255
 256                 regulators {
 257                         /* VDD_SOC (1+R1/R2 = 1.635) */
 258                         reg_vdd_soc: sw1 {
 259                                 regulator-name = "vddsoc";
 260                                 regulator-min-microvolt = <674400>;
 261                                 regulator-max-microvolt = <1308000>;
 262                                 lltc,fb-voltage-divider = <127000 200000>;
 263                                 regulator-ramp-delay = <7000>;
 264                                 regulator-boot-on;
 265                                 regulator-always-on;
 266                         };
 267
 268                         /* VDD_1P8 (1+R1/R2 = 2.505): GbE switch */
 269                         reg_1p8v: sw2 {
 270                                 regulator-name = "vdd1p8";
 271                                 regulator-min-microvolt = <1033310>;
 272                                 regulator-max-microvolt = <2004000>;
 273                                 lltc,fb-voltage-divider = <301000 200000>;
 274                                 regulator-ramp-delay = <7000>;
 275                                 regulator-boot-on;
 276                                 regulator-always-on;
 277                         };
 278
 279                         /* VDD_ARM (1+R1/R2 = 1.635) */
 280                         reg_vdd_arm: sw3 {
 281                                 regulator-name = "vddarm";
 282                                 regulator-min-microvolt = <674400>;
 283                                 regulator-max-microvolt = <1308000>;
 284                                 lltc,fb-voltage-divider = <127000 200000>;
 285                                 regulator-ramp-delay = <7000>;
 286                                 regulator-boot-on;
 287                                 regulator-always-on;
 288                         };
 289
 290                         /* VDD_DDR (1+R1/R2 = 2.105) */
 291                         reg_vdd_ddr: sw4 {
 292                                 regulator-name = "vddddr";
 293                                 regulator-min-microvolt = <868310>;
 294                                 regulator-max-microvolt = <1684000>;
 295                                 lltc,fb-voltage-divider = <221000 200000>;
 296                                 regulator-ramp-delay = <7000>;
 297                                 regulator-boot-on;
 298                                 regulator-always-on;
 299                         };
 300
 301                         /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
 302                         reg_2p5v: ldo2 {
 303                                 regulator-name = "vdd2p5";
 304                                 regulator-min-microvolt = <2490375>;
 305                                 regulator-max-microvolt = <2490375>;
 306                                 lltc,fb-voltage-divider = <487000 200000>;
 307                                 regulator-boot-on;
 308                                 regulator-always-on;
 309                         };
 310
 311                         /* VDD_HIGH (1+R1/R2 = 4.17) */
 312                         reg_3p0v: ldo4 {
 313                                 regulator-name = "vdd3p0";
 314                                 regulator-min-microvolt = <3023250>;
 315                                 regulator-max-microvolt = <3023250>;
 316                                 lltc,fb-voltage-divider = <634000 200000>;
 317                                 regulator-boot-on;
 318                                 regulator-always-on;
 319                         };
 320                 };
 321         };
 322 };
 323
 324 &i2c3 {
 325         clock-frequency = <100000>;
 326         pinctrl-names = "default";
 327         pinctrl-0 = <&pinctrl_i2c3>;
 328         status = "okay";
 329
 330         egalax_ts: touchscreen@4 {
 331                 compatible = "eeti,egalax_ts";
 332                 reg = <0x04>;
 333                 interrupt-parent = <&gpio1>;
 334                 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 335                 wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 336         };
 337 };
 338
 339 &ldb {
 340         status = "okay";
 341
 342         lvds-channel@0 {
 343                 fsl,data-mapping = "spwg";
 344                 fsl,data-width = <18>;
 345                 status = "okay";
 346
 347                 display-timings {
 348                         native-mode = <&timing0>;
 349                         timing0: hsd100pxn1 {
 350                                 clock-frequency = <65000000>;
 351                                 hactive = <1024>;
 352                                 vactive = <768>;
 353                                 hback-porch = <220>;
 354                                 hfront-porch = <40>;
 355                                 vback-porch = <21>;
 356                                 vfront-porch = <7>;
 357                                 hsync-len = <60>;
 358                                 vsync-len = <10>;
 359                         };
 360                 };
 361         };
 362 };
 363
 364 &pcie {
 365         pinctrl-names = "default";
 366         pinctrl-0 = <&pinctrl_pcie>;
 367         reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
 368         status = "okay";
 369 };
 370
 371 &pwm2 {
 372         pinctrl-names = "default";
 373         pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
 374         status = "disabled";
 375 };
 376
 377 &pwm3 {
 378         pinctrl-names = "default";
 379         pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
 380         status = "disabled";
 381 };
 382
 383 &pwm4 {
 384         pinctrl-names = "default";
 385         pinctrl-0 = <&pinctrl_pwm4>;
 386         status = "okay";
 387 };
 388
 389 &uart1 {
 390         pinctrl-names = "default";
 391         pinctrl-0 = <&pinctrl_uart1>;
 392         status = "okay";
 393 };
 394
 395 &uart2 {
 396         pinctrl-names = "default";
 397         pinctrl-0 = <&pinctrl_uart2>;
 398         status = "okay";
 399 };
 400
 401 &uart3 {
 402         pinctrl-names = "default";
 403         pinctrl-0 = <&pinctrl_uart3>;
 404         uart-has-rtscts;
 405         status = "okay";
 406 };
 407
 408 &uart4 {
 409         pinctrl-names = "default";
 410         pinctrl-0 = <&pinctrl_uart4>;
 411         uart-has-rtscts;
 412         status = "okay";
 413 };
 414
 415 &uart5 {
 416         pinctrl-names = "default";
 417         pinctrl-0 = <&pinctrl_uart5>;
 418         status = "okay";
 419 };
 420
 421 &usbotg {
 422         vbus-supply = <&reg_usb_otg_vbus>;
 423         pinctrl-names = "default";
 424         pinctrl-0 = <&pinctrl_usbotg>;
 425         disable-over-current;
 426         status = "okay";
 427 };
 428
 429 &usbh1 {
 430         vbus-supply = <&reg_usb_h1_vbus>;
 431         status = "okay";
 432 };
 433
 434 &usdhc3 {
 435         pinctrl-names = "default", "state_100mhz", "state_200mhz";
 436         pinctrl-0 = <&pinctrl_usdhc3>;
 437         pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 438         pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 439         non-removable;
 440         vmmc-supply = <&reg_3p3v>;
 441         keep-power-in-suspend;
 442         status = "okay";
 443 };
 444
 445 &wdog1 {
 446         pinctrl-names = "default";
 447         pinctrl-0 = <&pinctrl_wdog>;
 448         fsl,ext-reset-output;
 449 };
 450
 451 &iomuxc {
 452         pinctrl_enet: enetgrp {
 453                 fsl,pins = <
 454                         MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
 455                         MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
 456                         MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
 457                         MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
 458                         MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
 459                         MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
 460                         MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b030
 461                         MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b030
 462                         MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b030
 463                         MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b030
 464                         MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b030
 465                         MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b030
 466                         MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
 467                         MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 468                         MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 469                         MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
 470                         MX6QDL_PAD_ENET_TXD0__GPIO1_IO30        0x4001b0b0 /* PHY_RST# */
 471                 >;
 472         };
 473
 474         pinctrl_gpio_leds: gpioledsgrp {
 475                 fsl,pins = <
 476                         MX6QDL_PAD_KEY_COL0__GPIO4_IO06         0x1b0b0
 477                         MX6QDL_PAD_KEY_ROW0__GPIO4_IO07         0x1b0b0
 478                         MX6QDL_PAD_KEY_ROW4__GPIO4_IO15         0x1b0b0
 479                 >;
 480         };
 481
 482         pinctrl_i2c1: i2c1grp {
 483                 fsl,pins = <
 484                         MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
 485                         MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
 486                 >;
 487         };
 488
 489         pinctrl_i2c2: i2c2grp {
 490                 fsl,pins = <
 491                         MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
 492                         MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 493                 >;
 494         };
 495
 496         pinctrl_i2c3: i2c3grp {
 497                 fsl,pins = <
 498                         MX6QDL_PAD_GPIO_3__I2C3_SCL             0x4001b8b1
 499                         MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
 500                 >;
 501         };
 502
 503         pinctrl_pcie: pciegrp {
 504                 fsl,pins = <
 505                         MX6QDL_PAD_GPIO_0__GPIO1_IO00   0x1b0b0 /* PCIE RST */
 506                 >;
 507         };
 508
 509         pinctrl_pmic: pmicgrp {
 510                 fsl,pins = <
 511                         MX6QDL_PAD_GPIO_8__GPIO1_IO08   0x1b0b0 /* PMIC_IRQ# */
 512                 >;
 513         };
 514
 515         pinctrl_pps: ppsgrp {
 516                 fsl,pins = <
 517                         MX6QDL_PAD_ENET_RXD1__GPIO1_IO26        0x1b0b1
 518                 >;
 519         };
 520
 521         pinctrl_pwm2: pwm2grp {
 522                 fsl,pins = <
 523                         MX6QDL_PAD_SD1_DAT2__PWM2_OUT           0x1b0b1
 524                 >;
 525         };
 526
 527         pinctrl_pwm3: pwm3grp {
 528                 fsl,pins = <
 529                         MX6QDL_PAD_SD1_DAT1__PWM3_OUT           0x1b0b1
 530                 >;
 531         };
 532
 533         pinctrl_pwm4: pwm4grp {
 534                 fsl,pins = <
 535                         MX6QDL_PAD_SD1_CMD__PWM4_OUT            0x1b0b1
 536                 >;
 537         };
 538
 539         pinctrl_uart1: uart1grp {
 540                 fsl,pins = <
 541                         MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA    0x1b0b1
 542                         MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA    0x1b0b1
 543                 >;
 544         };
 545
 546         pinctrl_uart2: uart2grp {
 547                 fsl,pins = <
 548                         MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA      0x1b0b1
 549                         MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA      0x1b0b1
 550                 >;
 551         };
 552
 553         pinctrl_uart3: uart3grp {
 554                 fsl,pins = <
 555                         MX6QDL_PAD_EIM_D23__UART3_CTS_B         0x1b0b1
 556                         MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
 557                         MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
 558                         MX6QDL_PAD_EIM_D31__UART3_RTS_B         0x1b0b1
 559                 >;
 560         };
 561
 562         pinctrl_uart4: uart4grp {
 563                 fsl,pins = <
 564                         MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA    0x1b0b1
 565                         MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA    0x1b0b1
 566                         MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B      0x1b0b1
 567                         MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B      0x1b0b1
 568                 >;
 569         };
 570
 571         pinctrl_uart5: uart5grp {
 572                 fsl,pins = <
 573                         MX6QDL_PAD_KEY_COL1__UART5_TX_DATA      0x1b0b1
 574                         MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA      0x1b0b1
 575                 >;
 576         };
 577
 578         pinctrl_usbotg: usbotggrp {
 579                 fsl,pins = <
 580                         MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
 581                         MX6QDL_PAD_EIM_D22__GPIO3_IO22          0x1b0b0 /* PWR_EN */
 582                         MX6QDL_PAD_KEY_COL4__GPIO4_IO14         0x1b0b0 /* OC */
 583                 >;
 584         };
 585
 586         pinctrl_usdhc3: usdhc3grp {
 587                 fsl,pins = <
 588                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 589                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 590                         MX6QDL_PAD_SD3_RST__SD3_RESET           0x10059
 591                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 592                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 593                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 594                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 595                         MX6QDL_PAD_SD3_DAT4__SD3_DATA4          0x17059
 596                         MX6QDL_PAD_SD3_DAT5__SD3_DATA5          0x17059
 597                         MX6QDL_PAD_SD3_DAT6__SD3_DATA6          0x17059
 598                         MX6QDL_PAD_SD3_DAT7__SD3_DATA7          0x17059
 599                 >;
 600         };
 601
 602         pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
 603                 fsl,pins = <
 604                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x170b9
 605                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x100b9
 606                         MX6QDL_PAD_SD3_RST__SD3_RESET           0x100b9
 607                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x170b9
 608                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x170b9
 609                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x170b9
 610                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x170b9
 611                         MX6QDL_PAD_SD3_DAT4__SD3_DATA4          0x170b9
 612                         MX6QDL_PAD_SD3_DAT5__SD3_DATA5          0x170b9
 613                         MX6QDL_PAD_SD3_DAT6__SD3_DATA6          0x170b9
 614                         MX6QDL_PAD_SD3_DAT7__SD3_DATA7          0x170b9
 615                 >;
 616         };
 617
 618         pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
 619                 fsl,pins = <
 620                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x170f9
 621                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x100f9
 622                         MX6QDL_PAD_SD3_RST__SD3_RESET           0x100f9
 623                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x170f9
 624                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x170f9
 625                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x170f9
 626                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x170f9
 627                         MX6QDL_PAD_SD3_DAT4__SD3_DATA4          0x170f9
 628                         MX6QDL_PAD_SD3_DAT5__SD3_DATA5          0x170f9
 629                         MX6QDL_PAD_SD3_DAT6__SD3_DATA6          0x170f9
 630                         MX6QDL_PAD_SD3_DAT7__SD3_DATA7          0x170f9
 631                 >;
 632         };
 633
 634         pinctrl_wdog: wdoggrp {
 635                 fsl,pins = <
 636                         MX6QDL_PAD_DISP0_DAT8__WDOG1_B          0x1b0b0
 637                 >;
 638         };
 639 };