1 // SPDX-License-Identifier: GPL-2.0-only
5 compatible = "gpio-keys";
6 pinctrl-names = "default";
7 pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>;
11 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */
18 gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */
25 gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */
32 gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */
39 compatible = "ti,omap-twl4030";
40 ti,model = "omap3logic";
45 compatible = "gpio-leds";
46 pinctrl-names = "default";
47 pinctrl-0 = <&led_pins>;
51 gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; /* gpio180 */
52 linux,default-trigger = "cpu0";
57 gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; /* gpio179 */
58 linux,default-trigger = "none";
63 compatible = "ti,omap-dmtimer-pwm";
64 pinctrl-names = "default";
65 pinctrl-0 = <&pwm_pins>;
66 ti,timers = <&timer10>;
68 ti,clock-source = <0x01>;
74 regulator-min-microvolt = <3000000>;
75 regulator-max-microvolt = <3000000>;
79 regulator-min-microvolt = <1800000>;
80 regulator-max-microvolt = <1800000>;
88 ti,bb-uvolt = <3200000>;
93 ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */
94 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */
97 pinctrl-names = "default";
98 pinctrl-0 = <&lan9221_pins>;
99 interrupt-parent = <&gpio5>;
100 interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* gpio129 */
106 pinctrl-names = "default";
107 pinctrl-0 = <&hdq_pins>;
117 vdds_dsi-supply = <&vpll2>;
118 vdda_video-supply = <&vpll2>;
119 pinctrl-names = "default";
120 pinctrl-0 = <&dss_dpi_pins1>;
123 remote-endpoint = <&lcd_in>;
135 /* This isn't the exact LCD, but the timings meet spec */
136 compatible = "newhaven,nhd-4.3-480272ef-atxl";
138 pinctrl-names = "default";
139 pinctrl-0 = <&panel_pwr_pins>;
141 enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
144 remote-endpoint = <&dpi_out>;
150 compatible = "pwm-backlight";
151 pinctrl-names = "default";
152 pinctrl-0 = <&backlight_pins>;
153 pwms = <&pwm10 0 5000000 0>;
154 brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
155 default-brightness-level = <7>;
156 enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */
161 interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
162 pinctrl-names = "default";
163 pinctrl-0 = <&mmc1_pins &mmc1_cd>;
164 cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio127 */
165 vmmc-supply = <&vmmc1>;
171 gpio_key_pins: pinmux_gpio_key_pins {
172 pinctrl-single,pins = <
173 OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */
174 OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */
179 pinctrl-single,pins = <
180 OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* hdq_sio */
184 pwm_pins: pinmux_pwm_pins {
185 pinctrl-single,pins = <
186 OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* gpmc_ncs5.gpt_10_pwm_evt */
190 led_pins: pinmux_led_pins {
191 pinctrl-single,pins = <
192 OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */
193 OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4) /* gpio_180 */
197 mmc1_pins: pinmux_mmc1_pins {
198 pinctrl-single,pins = <
199 OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
200 OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
201 OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
202 OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
203 OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
204 OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
208 tsc2004_pins: pinmux_tsc2004_pins {
209 pinctrl-single,pins = <
210 OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */
214 backlight_pins: pinmux_backlight_pins {
215 pinctrl-single,pins = <
216 OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_dx.gpio_154 */
220 isp_pins: pinmux_isp_pins {
221 pinctrl-single,pins = <
222 OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0) /* cam_hs.cam_hs */
223 OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0) /* cam_vs.cam_vs */
224 OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0) /* cam_xclka.cam_xclka */
225 OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0) /* cam_pclk.cam_pclk */
227 OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */
228 OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */
229 OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */
230 OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0) /* cam_d3.cam_d3 */
231 OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0) /* cam_d4.cam_d4 */
232 OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0) /* cam_d5.cam_d5 */
233 OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6.cam_d6 */
234 OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7.cam_d7 */
238 panel_pwr_pins: pinmux_panel_pwr_pins {
239 pinctrl-single,pins = <
240 OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */
244 dss_dpi_pins1: pinmux_dss_dpi_pins1 {
245 pinctrl-single,pins = <
246 OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */
247 OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */
248 OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_vsync.dss_vsync */
249 OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_acbias.dss_acbias */
251 OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data6.dss_data6 */
252 OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data7.dss_data7 */
253 OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data8.dss_data8 */
254 OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data9.dss_data9 */
255 OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data10.dss_data10 */
256 OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data11.dss_data11 */
257 OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data12.dss_data12 */
258 OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data13.dss_data13 */
259 OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data14.dss_data14 */
260 OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data15.dss_data15 */
261 OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data16.dss_data16 */
262 OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data17.dss_data17 */
264 OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data18.dss_data0 */
265 OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data19.dss_data1 */
266 OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data20.dss_data2 */
267 OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data21.dss_data3 */
268 OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data22.dss_data4 */
269 OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data23.dss_data5 */
275 gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup {
276 pinctrl-single,pins = <
277 OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot0.gpio_2 */
278 OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot5.gpio_7 */
282 lan9221_pins: pinmux_lan9221_pins {
283 pinctrl-single,pins = <
284 OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */
288 mmc1_cd: pinmux_mmc1_cd {
289 pinctrl-single,pins = <
290 OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_127 */
297 compatible = "aptina,mt9p031";
300 vaa-supply = <&vaux4>;
301 vdd-supply = <&vaux4>;
302 vdd_io-supply = <&vaux4>;
304 mt9p031_out: endpoint {
305 input-clock-frequency = <24000000>;
306 pixel-clock-frequency = <72000000>;
307 remote-endpoint = <&ccdc_ep>;
314 touchscreen: tsc2004@48 {
315 compatible = "ti,tsc2004";
317 vio-supply = <&vaux1>;
318 pinctrl-names = "default";
319 pinctrl-0 = <&tsc2004_pins>;
320 interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */
322 touchscreen-fuzz-x = <4>;
323 touchscreen-fuzz-y = <7>;
324 touchscreen-fuzz-pressure = <2>;
325 touchscreen-size-x = <4096>;
326 touchscreen-size-y = <4096>;
327 touchscreen-max-pressure = <2048>;
329 ti,x-plate-ohms = <280>;
330 ti,esd-recovery-timeout-ms = <8000>;
336 compatible = "atmel,at25";
338 spi-max-frequency = <5000000>;
344 address-width = <16>;
349 pinctrl-names = "default";
350 pinctrl-0 = <&isp_pins>;
355 remote-endpoint = <&mt9p031_out>;
366 interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
369 /* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
371 pinctrl-names = "default";
372 pinctrl-0 = <&hsusb_otg_pins>;
373 interface-type = <0>;
374 usb-phy = <&usb2_phy>;
376 phy-names = "usb2-phy";