sys/gnu/dts/arm/ls1021a.dtsi

   1 /*
   2  * Copyright 2013-2014 Freescale Semiconductor, Inc.
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License as
  11  *     published by the Free Software Foundation; either version 2 of
  12  *     the License, or (at your option) any later version.
  13  *
  14  *     This file is distributed in the hope that it will be useful,
  15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *     GNU General Public License for more details.
  18  *
  19  *     You should have received a copy of the GNU General Public
  20  *     License along with this file; if not, write to the Free
  21  *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
  22  *     MA 02110-1301 USA
  23  *
  24  * Or, alternatively,
  25  *
  26  *  b) Permission is hereby granted, free of charge, to any person
  27  *     obtaining a copy of this software and associated documentation
  28  *     files (the "Software"), to deal in the Software without
  29  *     restriction, including without limitation the rights to use,
  30  *     copy, modify, merge, publish, distribute, sublicense, and/or
  31  *     sell copies of the Software, and to permit persons to whom the
  32  *     Software is furnished to do so, subject to the following
  33  *     conditions:
  34  *
  35  *     The above copyright notice and this permission notice shall be
  36  *     included in all copies or substantial portions of the Software.
  37  *
  38  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  39  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  40  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  41  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  42  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  43  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  44  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  45  *     OTHER DEALINGS IN THE SOFTWARE.
  46  */
  47
  48 #include "skeleton64.dtsi"
  49 #include <dt-bindings/interrupt-controller/arm-gic.h>
  50 #include <dt-bindings/thermal/thermal.h>
  51
  52 / {
  53         compatible = "fsl,ls1021a";
  54         interrupt-parent = <&gic>;
  55
  56         aliases {
  57                 crypto = &crypto;
  58                 ethernet0 = &enet0;
  59                 ethernet1 = &enet1;
  60                 ethernet2 = &enet2;
  61                 serial0 = &lpuart0;
  62                 serial1 = &lpuart1;
  63                 serial2 = &lpuart2;
  64                 serial3 = &lpuart3;
  65                 serial4 = &lpuart4;
  66                 serial5 = &lpuart5;
  67                 sysclk = &sysclk;
  68         };
  69
  70         cpus {
  71                 #address-cells = <1>;
  72                 #size-cells = <0>;
  73
  74                 cpu0: cpu@f00 {
  75                         compatible = "arm,cortex-a7";
  76                         device_type = "cpu";
  77                         reg = <0xf00>;
  78                         clocks = <&clockgen 1 0>;
  79                         #cooling-cells = <2>;
  80                 };
  81
  82                 cpu1: cpu@f01 {
  83                         compatible = "arm,cortex-a7";
  84                         device_type = "cpu";
  85                         reg = <0xf01>;
  86                         clocks = <&clockgen 1 0>;
  87                 };
  88         };
  89
  90         sysclk: sysclk {
  91                 compatible = "fixed-clock";
  92                 #clock-cells = <0>;
  93                 clock-frequency = <100000000>;
  94                 clock-output-names = "sysclk";
  95         };
  96
  97         timer {
  98                 compatible = "arm,armv7-timer";
  99                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 100                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 101                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 102                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 103         };
 104
 105         pmu {
 106                 compatible = "arm,cortex-a7-pmu";
 107                 interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
 108                              <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
 109                 interrupt-affinity = <&cpu0>, <&cpu1>;
 110         };
 111
 112         reboot {
 113                 compatible = "syscon-reboot";
 114                 regmap = <&dcfg>;
 115                 offset = <0xb0>;
 116                 mask = <0x02>;
 117         };
 118
 119         soc {
 120                 compatible = "simple-bus";
 121                 #address-cells = <2>;
 122                 #size-cells = <2>;
 123                 device_type = "soc";
 124                 interrupt-parent = <&gic>;
 125                 ranges;
 126
 127                 gic: interrupt-controller@1400000 {
 128                         compatible = "arm,gic-400", "arm,cortex-a7-gic";
 129                         #interrupt-cells = <3>;
 130                         interrupt-controller;
 131                         reg = <0x0 0x1401000 0x0 0x1000>,
 132                               <0x0 0x1402000 0x0 0x2000>,
 133                               <0x0 0x1404000 0x0 0x2000>,
 134                               <0x0 0x1406000 0x0 0x2000>;
 135                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 136
 137                 };
 138
 139                 msi1: msi-controller@1570e00 {
 140                         compatible = "fsl,ls1021a-msi";
 141                         reg = <0x0 0x1570e00 0x0 0x8>;
 142                         msi-controller;
 143                         interrupts =  <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
 144                 };
 145
 146                 msi2: msi-controller@1570e08 {
 147                         compatible = "fsl,ls1021a-msi";
 148                         reg = <0x0 0x1570e08 0x0 0x8>;
 149                         msi-controller;
 150                         interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
 151                 };
 152
 153                 ifc: ifc@1530000 {
 154                         compatible = "fsl,ifc", "simple-bus";
 155                         reg = <0x0 0x1530000 0x0 0x10000>;
 156                         interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 157                 };
 158
 159                 dcfg: dcfg@1ee0000 {
 160                         compatible = "fsl,ls1021a-dcfg", "syscon";
 161                         reg = <0x0 0x1ee0000 0x0 0x10000>;
 162                         big-endian;
 163                 };
 164
 165                 qspi: quadspi@1550000 {
 166                         compatible = "fsl,ls1021a-qspi";
 167                         #address-cells = <1>;
 168                         #size-cells = <0>;
 169                         reg = <0x0 0x1550000 0x0 0x10000>,
 170                               <0x0 0x40000000 0x0 0x40000000>;
 171                         reg-names = "QuadSPI", "QuadSPI-memory";
 172                         interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 173                         clock-names = "qspi_en", "qspi";
 174                         clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 175                         big-endian;
 176                         status = "disabled";
 177                 };
 178
 179                 esdhc: esdhc@1560000 {
 180                         compatible = "fsl,ls1021a-esdhc", "fsl,esdhc";
 181                         reg = <0x0 0x1560000 0x0 0x10000>;
 182                         interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 183                         clock-frequency = <0>;
 184                         voltage-ranges = <1800 1800 3300 3300>;
 185                         sdhci,auto-cmd12;
 186                         big-endian;
 187                         bus-width = <4>;
 188                         status = "disabled";
 189                 };
 190
 191                 sata: sata@3200000 {
 192                         compatible = "fsl,ls1021a-ahci";
 193                         reg = <0x0 0x3200000 0x0 0x10000>,
 194                               <0x0 0x20220520 0x0 0x4>;
 195                         reg-names = "ahci", "sata-ecc";
 196                         interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 197                         clocks = <&clockgen 4 1>;
 198                         dma-coherent;
 199                         status = "disabled";
 200                 };
 201
 202                 scfg: scfg@1570000 {
 203                         compatible = "fsl,ls1021a-scfg", "syscon";
 204                         reg = <0x0 0x1570000 0x0 0x10000>;
 205                         big-endian;
 206                 };
 207
 208                 crypto: crypto@1700000 {
 209                         compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
 210                         fsl,sec-era = <7>;
 211                         #address-cells = <1>;
 212                         #size-cells = <1>;
 213                         reg              = <0x0 0x1700000 0x0 0x100000>;
 214                         ranges           = <0x0 0x0 0x1700000 0x100000>;
 215                         interrupts       = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 216
 217                         sec_jr0: jr@10000 {
 218                                 compatible = "fsl,sec-v5.0-job-ring",
 219                                      "fsl,sec-v4.0-job-ring";
 220                                 reg = <0x10000 0x10000>;
 221                                 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 222                         };
 223
 224                         sec_jr1: jr@20000 {
 225                                 compatible = "fsl,sec-v5.0-job-ring",
 226                                      "fsl,sec-v4.0-job-ring";
 227                                 reg = <0x20000 0x10000>;
 228                                 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
 229                         };
 230
 231                         sec_jr2: jr@30000 {
 232                                 compatible = "fsl,sec-v5.0-job-ring",
 233                                      "fsl,sec-v4.0-job-ring";
 234                                 reg = <0x30000 0x10000>;
 235                                 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 236                         };
 237
 238                         sec_jr3: jr@40000 {
 239                                 compatible = "fsl,sec-v5.0-job-ring",
 240                                      "fsl,sec-v4.0-job-ring";
 241                                 reg = <0x40000 0x10000>;
 242                                 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 243                         };
 244
 245                 };
 246
 247                 clockgen: clocking@1ee1000 {
 248                         compatible = "fsl,ls1021a-clockgen";
 249                         reg = <0x0 0x1ee1000 0x0 0x1000>;
 250                         #clock-cells = <2>;
 251                         clocks = <&sysclk>;
 252                 };
 253
 254                 tmu: tmu@1f00000 {
 255                         compatible = "fsl,qoriq-tmu";
 256                         reg = <0x0 0x1f00000 0x0 0x10000>;
 257                         interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 258                         fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>;
 259                         fsl,tmu-calibration = <0x00000000 0x0000000f
 260                                                0x00000001 0x00000017
 261                                                0x00000002 0x0000001e
 262                                                0x00000003 0x00000026
 263                                                0x00000004 0x0000002e
 264                                                0x00000005 0x00000035
 265                                                0x00000006 0x0000003d
 266                                                0x00000007 0x00000044
 267                                                0x00000008 0x0000004c
 268                                                0x00000009 0x00000053
 269                                                0x0000000a 0x0000005b
 270                                                0x0000000b 0x00000064
 271
 272                                                0x00010000 0x00000011
 273                                                0x00010001 0x0000001c
 274                                                0x00010002 0x00000024
 275                                                0x00010003 0x0000002b
 276                                                0x00010004 0x00000034
 277                                                0x00010005 0x00000039
 278                                                0x00010006 0x00000042
 279                                                0x00010007 0x0000004c
 280                                                0x00010008 0x00000051
 281                                                0x00010009 0x0000005a
 282                                                0x0001000a 0x00000063
 283
 284                                                0x00020000 0x00000013
 285                                                0x00020001 0x00000019
 286                                                0x00020002 0x00000024
 287                                                0x00020003 0x0000002c
 288                                                0x00020004 0x00000035
 289                                                0x00020005 0x0000003d
 290                                                0x00020006 0x00000046
 291                                                0x00020007 0x00000050
 292                                                0x00020008 0x00000059
 293
 294                                                0x00030000 0x00000002
 295                                                0x00030001 0x0000000d
 296                                                0x00030002 0x00000019
 297                                                0x00030003 0x00000024>;
 298                         #thermal-sensor-cells = <1>;
 299                 };
 300
 301                 thermal-zones {
 302                         cpu_thermal: cpu-thermal {
 303                                 polling-delay-passive = <1000>;
 304                                 polling-delay = <5000>;
 305
 306                                 thermal-sensors = <&tmu 0>;
 307
 308                                 trips {
 309                                         cpu_alert: cpu-alert {
 310                                                 temperature = <85000>;
 311                                                 hysteresis = <2000>;
 312                                                 type = "passive";
 313                                         };
 314                                         cpu_crit: cpu-crit {
 315                                                 temperature = <95000>;
 316                                                 hysteresis = <2000>;
 317                                                 type = "critical";
 318                                         };
 319                                 };
 320
 321                                 cooling-maps {
 322                                         map0 {
 323                                                 trip = <&cpu_alert>;
 324                                                 cooling-device =
 325                                                         <&cpu0 THERMAL_NO_LIMIT
 326                                                         THERMAL_NO_LIMIT>;
 327                                         };
 328                                 };
 329                         };
 330                 };
 331
 332                 dspi0: dspi@2100000 {
 333                         compatible = "fsl,ls1021a-v1.0-dspi";
 334                         #address-cells = <1>;
 335                         #size-cells = <0>;
 336                         reg = <0x0 0x2100000 0x0 0x10000>;
 337                         interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 338                         clock-names = "dspi";
 339                         clocks = <&clockgen 4 1>;
 340                         spi-num-chipselects = <6>;
 341                         big-endian;
 342                         status = "disabled";
 343                 };
 344
 345                 dspi1: dspi@2110000 {
 346                         compatible = "fsl,ls1021a-v1.0-dspi";
 347                         #address-cells = <1>;
 348                         #size-cells = <0>;
 349                         reg = <0x0 0x2110000 0x0 0x10000>;
 350                         interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 351                         clock-names = "dspi";
 352                         clocks = <&clockgen 4 1>;
 353                         spi-num-chipselects = <6>;
 354                         big-endian;
 355                         status = "disabled";
 356                 };
 357
 358                 i2c0: i2c@2180000 {
 359                         compatible = "fsl,vf610-i2c";
 360                         #address-cells = <1>;
 361                         #size-cells = <0>;
 362                         reg = <0x0 0x2180000 0x0 0x10000>;
 363                         interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 364                         clock-names = "i2c";
 365                         clocks = <&clockgen 4 1>;
 366                         status = "disabled";
 367                 };
 368
 369                 i2c1: i2c@2190000 {
 370                         compatible = "fsl,vf610-i2c";
 371                         #address-cells = <1>;
 372                         #size-cells = <0>;
 373                         reg = <0x0 0x2190000 0x0 0x10000>;
 374                         interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 375                         clock-names = "i2c";
 376                         clocks = <&clockgen 4 1>;
 377                         status = "disabled";
 378                 };
 379
 380                 i2c2: i2c@21a0000 {
 381                         compatible = "fsl,vf610-i2c";
 382                         #address-cells = <1>;
 383                         #size-cells = <0>;
 384                         reg = <0x0 0x21a0000 0x0 0x10000>;
 385                         interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 386                         clock-names = "i2c";
 387                         clocks = <&clockgen 4 1>;
 388                         status = "disabled";
 389                 };
 390
 391                 uart0: serial@21c0500 {
 392                         compatible = "fsl,16550-FIFO64", "ns16550a";
 393                         reg = <0x0 0x21c0500 0x0 0x100>;
 394                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 395                         clock-frequency = <0>;
 396                         fifo-size = <15>;
 397                         status = "disabled";
 398                 };
 399
 400                 uart1: serial@21c0600 {
 401                         compatible = "fsl,16550-FIFO64", "ns16550a";
 402                         reg = <0x0 0x21c0600 0x0 0x100>;
 403                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 404                         clock-frequency = <0>;
 405                         fifo-size = <15>;
 406                         status = "disabled";
 407                 };
 408
 409                 uart2: serial@21d0500 {
 410                         compatible = "fsl,16550-FIFO64", "ns16550a";
 411                         reg = <0x0 0x21d0500 0x0 0x100>;
 412                         interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 413                         clock-frequency = <0>;
 414                         fifo-size = <15>;
 415                         status = "disabled";
 416                 };
 417
 418                 uart3: serial@21d0600 {
 419                         compatible = "fsl,16550-FIFO64", "ns16550a";
 420                         reg = <0x0 0x21d0600 0x0 0x100>;
 421                         interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 422                         clock-frequency = <0>;
 423                         fifo-size = <15>;
 424                         status = "disabled";
 425                 };
 426
 427                 gpio0: gpio@2300000 {
 428                         compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
 429                         reg = <0x0 0x2300000 0x0 0x10000>;
 430                         interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 431                         gpio-controller;
 432                         #gpio-cells = <2>;
 433                         interrupt-controller;
 434                         #interrupt-cells = <2>;
 435                 };
 436
 437                 gpio1: gpio@2310000 {
 438                         compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
 439                         reg = <0x0 0x2310000 0x0 0x10000>;
 440                         interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 441                         gpio-controller;
 442                         #gpio-cells = <2>;
 443                         interrupt-controller;
 444                         #interrupt-cells = <2>;
 445                 };
 446
 447                 gpio2: gpio@2320000 {
 448                         compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
 449                         reg = <0x0 0x2320000 0x0 0x10000>;
 450                         interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 451                         gpio-controller;
 452                         #gpio-cells = <2>;
 453                         interrupt-controller;
 454                         #interrupt-cells = <2>;
 455                 };
 456
 457                 gpio3: gpio@2330000 {
 458                         compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
 459                         reg = <0x0 0x2330000 0x0 0x10000>;
 460                         interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
 461                         gpio-controller;
 462                         #gpio-cells = <2>;
 463                         interrupt-controller;
 464                         #interrupt-cells = <2>;
 465                 };
 466
 467                 lpuart0: serial@2950000 {
 468                         compatible = "fsl,ls1021a-lpuart";
 469                         reg = <0x0 0x2950000 0x0 0x1000>;
 470                         interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 471                         clocks = <&sysclk>;
 472                         clock-names = "ipg";
 473                         status = "disabled";
 474                 };
 475
 476                 lpuart1: serial@2960000 {
 477                         compatible = "fsl,ls1021a-lpuart";
 478                         reg = <0x0 0x2960000 0x0 0x1000>;
 479                         interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 480                         clocks = <&clockgen 4 1>;
 481                         clock-names = "ipg";
 482                         status = "disabled";
 483                 };
 484
 485                 lpuart2: serial@2970000 {
 486                         compatible = "fsl,ls1021a-lpuart";
 487                         reg = <0x0 0x2970000 0x0 0x1000>;
 488                         interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 489                         clocks = <&clockgen 4 1>;
 490                         clock-names = "ipg";
 491                         status = "disabled";
 492                 };
 493
 494                 lpuart3: serial@2980000 {
 495                         compatible = "fsl,ls1021a-lpuart";
 496                         reg = <0x0 0x2980000 0x0 0x1000>;
 497                         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 498                         clocks = <&clockgen 4 1>;
 499                         clock-names = "ipg";
 500                         status = "disabled";
 501                 };
 502
 503                 lpuart4: serial@2990000 {
 504                         compatible = "fsl,ls1021a-lpuart";
 505                         reg = <0x0 0x2990000 0x0 0x1000>;
 506                         interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 507                         clocks = <&clockgen 4 1>;
 508                         clock-names = "ipg";
 509                         status = "disabled";
 510                 };
 511
 512                 lpuart5: serial@29a0000 {
 513                         compatible = "fsl,ls1021a-lpuart";
 514                         reg = <0x0 0x29a0000 0x0 0x1000>;
 515                         interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 516                         clocks = <&clockgen 4 1>;
 517                         clock-names = "ipg";
 518                         status = "disabled";
 519                 };
 520
 521                 wdog0: watchdog@2ad0000 {
 522                         compatible = "fsl,imx21-wdt";
 523                         reg = <0x0 0x2ad0000 0x0 0x10000>;
 524                         interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 525                         clocks = <&clockgen 4 1>;
 526                         clock-names = "wdog-en";
 527                         big-endian;
 528                 };
 529
 530                 sai1: sai@2b50000 {
 531                         #sound-dai-cells = <0>;
 532                         compatible = "fsl,vf610-sai";
 533                         reg = <0x0 0x2b50000 0x0 0x10000>;
 534                         interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
 535                         clocks = <&clockgen 4 1>, <&clockgen 4 1>,
 536                                  <&clockgen 4 1>, <&clockgen 4 1>;
 537                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 538                         dma-names = "tx", "rx";
 539                         dmas = <&edma0 1 47>,
 540                                <&edma0 1 46>;
 541                         status = "disabled";
 542                 };
 543
 544                 sai2: sai@2b60000 {
 545                         #sound-dai-cells = <0>;
 546                         compatible = "fsl,vf610-sai";
 547                         reg = <0x0 0x2b60000 0x0 0x10000>;
 548                         interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 549                         clocks = <&clockgen 4 1>, <&clockgen 4 1>,
 550                                  <&clockgen 4 1>, <&clockgen 4 1>;
 551                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 552                         dma-names = "tx", "rx";
 553                         dmas = <&edma0 1 45>,
 554                                <&edma0 1 44>;
 555                         status = "disabled";
 556                 };
 557
 558                 edma0: edma@2c00000 {
 559                         #dma-cells = <2>;
 560                         compatible = "fsl,vf610-edma";
 561                         reg = <0x0 0x2c00000 0x0 0x10000>,
 562                               <0x0 0x2c10000 0x0 0x10000>,
 563                               <0x0 0x2c20000 0x0 0x10000>;
 564                         interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
 565                                      <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
 566                         interrupt-names = "edma-tx", "edma-err";
 567                         dma-channels = <32>;
 568                         big-endian;
 569                         clock-names = "dmamux0", "dmamux1";
 570                         clocks = <&clockgen 4 1>,
 571                                  <&clockgen 4 1>;
 572                 };
 573
 574                 dcu: dcu@2ce0000 {
 575                         compatible = "fsl,ls1021a-dcu";
 576                         reg = <0x0 0x2ce0000 0x0 0x10000>;
 577                         interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
 578                         clocks = <&clockgen 4 0>,
 579                                 <&clockgen 4 0>;
 580                         clock-names = "dcu", "pix";
 581                         big-endian;
 582                         status = "disabled";
 583                 };
 584
 585                 mdio0: mdio@2d24000 {
 586                         compatible = "gianfar";
 587                         device_type = "mdio";
 588                         #address-cells = <1>;
 589                         #size-cells = <0>;
 590                         reg = <0x0 0x2d24000 0x0 0x4000>;
 591                 };
 592
 593                 ptp_clock@2d10e00 {
 594                         compatible = "fsl,etsec-ptp";
 595                         reg = <0x0 0x2d10e00 0x0 0xb0>;
 596                         interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
 597                         fsl,tclk-period = <5>;
 598                         fsl,tmr-prsc    = <2>;
 599                         fsl,tmr-add     = <0xaaaaaaab>;
 600                         fsl,tmr-fiper1  = <999999995>;
 601                         fsl,tmr-fiper2  = <99990>;
 602                         fsl,max-adj     = <499999999>;
 603                 };
 604
 605                 enet0: ethernet@2d10000 {
 606                         compatible = "fsl,etsec2";
 607                         device_type = "network";
 608                         #address-cells = <2>;
 609                         #size-cells = <2>;
 610                         interrupt-parent = <&gic>;
 611                         model = "eTSEC";
 612                         fsl,magic-packet;
 613                         ranges;
 614                         dma-coherent;
 615
 616                         queue-group@2d10000 {
 617                                 #address-cells = <2>;
 618                                 #size-cells = <2>;
 619                                 reg = <0x0 0x2d10000 0x0 0x1000>;
 620                                 interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
 621                                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
 622                                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 623                         };
 624
 625                         queue-group@2d14000  {
 626                                 #address-cells = <2>;
 627                                 #size-cells = <2>;
 628                                 reg = <0x0 0x2d14000 0x0 0x1000>;
 629                                 interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
 630                                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
 631                                         <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 632                         };
 633                 };
 634
 635                 enet1: ethernet@2d50000 {
 636                         compatible = "fsl,etsec2";
 637                         device_type = "network";
 638                         #address-cells = <2>;
 639                         #size-cells = <2>;
 640                         interrupt-parent = <&gic>;
 641                         model = "eTSEC";
 642                         ranges;
 643                         dma-coherent;
 644
 645                         queue-group@2d50000  {
 646                                 #address-cells = <2>;
 647                                 #size-cells = <2>;
 648                                 reg = <0x0 0x2d50000 0x0 0x1000>;
 649                                 interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
 650                                         <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
 651                                         <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
 652                         };
 653
 654                         queue-group@2d54000  {
 655                                 #address-cells = <2>;
 656                                 #size-cells = <2>;
 657                                 reg = <0x0 0x2d54000 0x0 0x1000>;
 658                                 interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
 659                                         <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
 660                                         <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 661                         };
 662                 };
 663
 664                 enet2: ethernet@2d90000 {
 665                         compatible = "fsl,etsec2";
 666                         device_type = "network";
 667                         #address-cells = <2>;
 668                         #size-cells = <2>;
 669                         interrupt-parent = <&gic>;
 670                         model = "eTSEC";
 671                         ranges;
 672                         dma-coherent;
 673
 674                         queue-group@2d90000  {
 675                                 #address-cells = <2>;
 676                                 #size-cells = <2>;
 677                                 reg = <0x0 0x2d90000 0x0 0x1000>;
 678                                 interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
 679                                         <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
 680                                         <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 681                         };
 682
 683                         queue-group@2d94000  {
 684                                 #address-cells = <2>;
 685                                 #size-cells = <2>;
 686                                 reg = <0x0 0x2d94000 0x0 0x1000>;
 687                                 interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
 688                                         <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
 689                                         <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 690                         };
 691                 };
 692
 693                 usb2: usb@8600000 {
 694                         compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
 695                         reg = <0x0 0x8600000 0x0 0x1000>;
 696                         interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
 697                         dr_mode = "host";
 698                         phy_type = "ulpi";
 699                 };
 700
 701                 usb3: usb3@3100000 {
 702                         compatible = "snps,dwc3";
 703                         reg = <0x0 0x3100000 0x0 0x10000>;
 704                         interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 705                         dr_mode = "host";
 706                         snps,quirk-frame-length-adjustment = <0x20>;
 707                         snps,dis_rxdet_inp3_quirk;
 708                 };
 709
 710                 pcie@3400000 {
 711                         compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
 712                         reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
 713                                0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 714                         reg-names = "regs", "config";
 715                         interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
 716                         fsl,pcie-scfg = <&scfg 0>;
 717                         #address-cells = <3>;
 718                         #size-cells = <2>;
 719                         device_type = "pci";
 720                         num-lanes = <4>;
 721                         bus-range = <0x0 0xff>;
 722                         ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
 723                                   0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 724                         msi-parent = <&msi1>, <&msi2>;
 725                         #interrupt-cells = <1>;
 726                         interrupt-map-mask = <0 0 0 7>;
 727                         interrupt-map = <0000 0 0 1 &gic GIC_SPI 91  IRQ_TYPE_LEVEL_HIGH>,
 728                                         <0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
 729                                         <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
 730                                         <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
 731                 };
 732
 733                 pcie@3500000 {
 734                         compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
 735                         reg = <0x00 0x03500000 0x0 0x00010000   /* controller registers */
 736                                0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 737                         reg-names = "regs", "config";
 738                         interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
 739                         fsl,pcie-scfg = <&scfg 1>;
 740                         #address-cells = <3>;
 741                         #size-cells = <2>;
 742                         device_type = "pci";
 743                         num-lanes = <4>;
 744                         bus-range = <0x0 0xff>;
 745                         ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
 746                                   0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 747                         msi-parent = <&msi1>, <&msi2>;
 748                         #interrupt-cells = <1>;
 749                         interrupt-map-mask = <0 0 0 7>;
 750                         interrupt-map = <0000 0 0 1 &gic GIC_SPI 92  IRQ_TYPE_LEVEL_HIGH>,
 751                                         <0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
 752                                         <0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
 753                                         <0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 754                 };
 755
 756                 can0: can@2a70000 {
 757                         compatible = "fsl,ls1021ar2-flexcan";
 758                         reg = <0x0 0x2a70000 0x0 0x1000>;
 759                         interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 760                         clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 761                         clock-names = "ipg", "per";
 762                         big-endian;
 763                 };
 764
 765                 can1: can@2a80000 {
 766                         compatible = "fsl,ls1021ar2-flexcan";
 767                         reg = <0x0 0x2a80000 0x0 0x1000>;
 768                         interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 769                         clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 770                         clock-names = "ipg", "per";
 771                         big-endian;
 772                 };
 773
 774                 can2: can@2a90000 {
 775                         compatible = "fsl,ls1021ar2-flexcan";
 776                         reg = <0x0 0x2a90000 0x0 0x1000>;
 777                         interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
 778                         clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 779                         clock-names = "ipg", "per";
 780                         big-endian;
 781                 };
 782
 783                 can3: can@2aa0000 {
 784                         compatible = "fsl,ls1021ar2-flexcan";
 785                         reg = <0x0 0x2aa0000 0x0 0x1000>;
 786                         interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
 787                         clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 788                         clock-names = "ipg", "per";
 789                         big-endian;
 790                 };
 791         };
 792 };