sys/gnu/dts/arm/omap3-n900.dts

   1 /*
   2  * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
   3  * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License version 2 (or later) as
   7  * published by the Free Software Foundation.
   8  */
   9
  10 /dts-v1/;
  11
  12 #include "omap34xx.dtsi"
  13 #include <dt-bindings/input/input.h>
  14
  15 /*
  16  * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
  17  * for omap AES HW crypto support. When linux kernel try to access memory of AES
  18  * blocks then kernel receive "Unhandled fault: external abort on non-linefetch"
  19  * and crash. Until somebody fix omap-aes.c and omap_hwmod_3xxx_data.c code (no
  20  * crash anymore) omap AES support will be disabled for all Nokia N900 devices.
  21  * There is "unofficial" version of bootloader which enables AES in L3 firewall
  22  * but it is not widely used and to prevent kernel crash rather AES is disabled.
  23  * There is also no runtime detection code if AES is disabled in L3 firewall...
  24  */
  25 &aes {
  26         status = "disabled";
  27 };
  28
  29 / {
  30         model = "Nokia N900";
  31         compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
  32
  33         aliases {
  34                 i2c0;
  35                 i2c1 = &i2c1;
  36                 i2c2 = &i2c2;
  37                 i2c3 = &i2c3;
  38                 display0 = &lcd;
  39                 display1 = &tv;
  40         };
  41
  42         cpus {
  43                 cpu@0 {
  44                         cpu0-supply = <&vcc>;
  45                 };
  46         };
  47
  48         leds {
  49                 compatible = "gpio-leds";
  50                 heartbeat {
  51                         label = "debug::sleep";
  52                         gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;  /* 162 */
  53                         linux,default-trigger = "default-on";
  54                         pinctrl-names = "default";
  55                         pinctrl-0 = <&debug_leds>;
  56                 };
  57         };
  58
  59         memory@80000000 {
  60                 device_type = "memory";
  61                 reg = <0x80000000 0x10000000>; /* 256 MB */
  62         };
  63
  64         gpio_keys {
  65                 compatible = "gpio-keys";
  66
  67                 camera_lens_cover {
  68                         label = "Camera Lens Cover";
  69                         gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
  70                         linux,input-type = <EV_SW>;
  71                         linux,code = <SW_CAMERA_LENS_COVER>;
  72                         linux,can-disable;
  73                 };
  74
  75                 camera_focus {
  76                         label = "Camera Focus";
  77                         gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
  78                         linux,code = <KEY_CAMERA_FOCUS>;
  79                         linux,can-disable;
  80                 };
  81
  82                 camera_capture {
  83                         label = "Camera Capture";
  84                         gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
  85                         linux,code = <KEY_CAMERA>;
  86                         linux,can-disable;
  87                 };
  88
  89                 lock_button {
  90                         label = "Lock Button";
  91                         gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
  92                         linux,code = <KEY_SCREENLOCK>;
  93                         linux,can-disable;
  94                 };
  95
  96                 keypad_slide {
  97                         label = "Keypad Slide";
  98                         gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
  99                         linux,input-type = <EV_SW>;
 100                         linux,code = <SW_KEYPAD_SLIDE>;
 101                         linux,can-disable;
 102                 };
 103
 104                 proximity_sensor {
 105                         label = "Proximity Sensor";
 106                         gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
 107                         linux,input-type = <EV_SW>;
 108                         linux,code = <SW_FRONT_PROXIMITY>;
 109                         linux,can-disable;
 110                 };
 111         };
 112
 113         isp1707: isp1707 {
 114                 compatible = "nxp,isp1707";
 115                 nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
 116                 usb-phy = <&usb2_phy>;
 117         };
 118
 119         tv: connector {
 120                 compatible = "composite-video-connector";
 121                 label = "tv";
 122
 123                 port {
 124                         tv_connector_in: endpoint {
 125                                 remote-endpoint = <&venc_out>;
 126                         };
 127                 };
 128         };
 129
 130         sound: n900-audio {
 131                 compatible = "nokia,n900-audio";
 132
 133                 nokia,cpu-dai = <&mcbsp2>;
 134                 nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
 135                 nokia,headphone-amplifier = <&tpa6130a2>;
 136
 137                 tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
 138                 jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
 139                 eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
 140                 speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
 141         };
 142
 143         battery: n900-battery {
 144                 compatible = "nokia,n900-battery";
 145                 io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>;
 146                 io-channel-names = "temp", "bsi", "vbat";
 147         };
 148
 149         pwm9: dmtimer-pwm {
 150                 compatible = "ti,omap-dmtimer-pwm";
 151                 #pwm-cells = <3>;
 152                 ti,timers = <&timer9>;
 153                 ti,clock-source = <0x00>; /* timer_sys_ck */
 154         };
 155
 156         ir: n900-ir {
 157                 compatible = "nokia,n900-ir";
 158                 pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
 159         };
 160
 161         /* controlled (enabled/disabled) directly by bcm2048 and wl1251 */
 162         vctcxo: vctcxo {
 163                 compatible = "fixed-clock";
 164                 #clock-cells = <0>;
 165                 clock-frequency = <38400000>;
 166         };
 167 };
 168
 169 &isp {
 170         vdds_csib-supply = <&vaux2>;
 171
 172         pinctrl-names = "default";
 173         pinctrl-0 = <&camera_pins>;
 174
 175         ports {
 176                 port@1 {
 177                         reg = <1>;
 178
 179                         csi_isp: endpoint {
 180                                 remote-endpoint = <&csi_cam1>;
 181                                 bus-type = <3>; /* CCP2 */
 182                                 clock-lanes = <1>;
 183                                 data-lanes = <0>;
 184                                 lane-polarity = <0 0>;
 185                                 /* Select strobe = <1> for back camera, <0> for front camera */
 186                                 strobe = <1>;
 187                         };
 188                 };
 189         };
 190 };
 191
 192 &omap3_pmx_core {
 193         pinctrl-names = "default";
 194
 195         uart2_pins: pinmux_uart2_pins {
 196                 pinctrl-single,pins = <
 197                         OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)         /* uart2_cts */
 198                         OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)               /* uart2_rts */
 199                         OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)               /* uart2_tx */
 200                         OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)                /* uart2_rx */
 201                 >;
 202         };
 203
 204         uart3_pins: pinmux_uart3_pins {
 205                 pinctrl-single,pins = <
 206                         OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)                /* uart3_rx */
 207                         OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)               /* uart3_tx */
 208                 >;
 209         };
 210
 211         ethernet_pins: pinmux_ethernet_pins {
 212                 pinctrl-single,pins = <
 213                         OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4)       /* gpmc_ncs3.gpio_54 */
 214                         OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4)               /* dss_data16.gpio_86 */
 215                         OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4)               /* uart3_rts_sd.gpio_164 */
 216                 >;
 217         };
 218
 219         gpmc_pins: pinmux_gpmc_pins {
 220                 pinctrl-single,pins = <
 221
 222                         /* address lines */
 223                         OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a1.gpmc_a1 */
 224                         OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a2.gpmc_a2 */
 225                         OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a3.gpmc_a3 */
 226
 227                         /* data lines, gpmc_d0..d7 not muxable according to TRM */
 228                         OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0)        /* gpmc_d8.gpmc_d8 */
 229                         OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0)        /* gpmc_d9.gpmc_d9 */
 230                         OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0)        /* gpmc_d10.gpmc_d10 */
 231                         OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0)        /* gpmc_d11.gpmc_d11 */
 232                         OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0)        /* gpmc_d12.gpmc_d12 */
 233                         OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0)        /* gpmc_d13.gpmc_d13 */
 234                         OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0)        /* gpmc_d14.gpmc_d14 */
 235                         OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0)        /* gpmc_d15.gpmc_d15 */
 236
 237                         /*
 238                          * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
 239                          * according to TRM. OneNAND seems to require PIN_INPUT on clock.
 240                          */
 241                         OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs1.gpmc_ncs1 */
 242                         OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
 243                 >;
 244         };
 245
 246         i2c1_pins: pinmux_i2c1_pins {
 247                 pinctrl-single,pins = <
 248                         OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)                /* i2c1_scl */
 249                         OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)                /* i2c1_sda */
 250                 >;
 251         };
 252
 253         i2c2_pins: pinmux_i2c2_pins {
 254                 pinctrl-single,pins = <
 255                         OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)                /* i2c2_scl */
 256                         OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)                /* i2c2_sda */
 257                 >;
 258         };
 259
 260         i2c3_pins: pinmux_i2c3_pins {
 261                 pinctrl-single,pins = <
 262                         OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)                /* i2c3_scl */
 263                         OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)                /* i2c3_sda */
 264                 >;
 265         };
 266
 267         debug_leds: pinmux_debug_led_pins {
 268                 pinctrl-single,pins = <
 269                         OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)       /* mcbsp1_clkx.gpio_162 */
 270                 >;
 271         };
 272
 273         mcspi4_pins: pinmux_mcspi4_pins {
 274                 pinctrl-single,pins = <
 275                         OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
 276                         OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
 277                         OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
 278                         OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
 279                 >;
 280         };
 281
 282         mmc1_pins: pinmux_mmc1_pins {
 283                 pinctrl-single,pins = <
 284                         OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */
 285                         OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */
 286                         OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat0 */
 287                         OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */
 288                         OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */
 289                         OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */
 290                 >;
 291         };
 292
 293         mmc2_pins: pinmux_mmc2_pins {
 294                 pinctrl-single,pins = <
 295                         OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
 296                         OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
 297                         OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc2_dat0 */
 298                         OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
 299                         OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
 300                         OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
 301                         OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */
 302                         OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */
 303                         OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */
 304                         OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */
 305                 >;
 306         };
 307
 308         acx565akm_pins: pinmux_acx565akm_pins {
 309                 pinctrl-single,pins = <
 310                         OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE4)               /* RX51_LCD_RESET_GPIO */
 311                 >;
 312         };
 313
 314         dss_sdi_pins: pinmux_dss_sdi_pins {
 315                 pinctrl-single,pins = <
 316                         OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE1)   /* dss_data10.sdi_dat1n */
 317                         OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE1)   /* dss_data11.sdi_dat1p */
 318                         OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE1)   /* dss_data12.sdi_dat2n */
 319                         OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE1)   /* dss_data13.sdi_dat2p */
 320
 321                         OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE1)   /* dss_data22.sdi_clkp */
 322                         OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE1)   /* dss_data23.sdi_clkn */
 323                 >;
 324         };
 325
 326         wl1251_pins: pinmux_wl1251 {
 327                 pinctrl-single,pins = <
 328                         OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4)               /* gpio 87 => wl1251 enable */
 329                         OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4)                /* gpio 42 => wl1251 irq */
 330                 >;
 331         };
 332
 333         ssi_pins: pinmux_ssi {
 334                 pinctrl-single,pins = <
 335                         OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
 336                         OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1)               /* ssi1_flag_tx */
 337                         OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4)                /* ssi1_wake_tx (cawake) */
 338                         OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1)               /* ssi1_dat_tx */
 339                         OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1)                /* ssi1_dat_rx */
 340                         OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1)                /* ssi1_flag_rx */
 341                         OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1)               /* ssi1_rdy_rx */
 342                         OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1)               /* ssi1_wake */
 343                 >;
 344         };
 345
 346         modem_pins: pinmux_modem {
 347                 pinctrl-single,pins = <
 348                         OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4)               /* gpio 70 => cmt_apeslpx */
 349                         OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4)                /* gpio 72 => ape_rst_rq */
 350                         OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4)               /* gpio 73 => cmt_rst_rq */
 351                         OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4)               /* gpio 74 => cmt_en */
 352                         OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4)               /* gpio 75 => cmt_rst */
 353                         OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)               /* gpio 157 => cmt_bsi */
 354                 >;
 355         };
 356
 357         camera_pins: pinmux_camera {
 358                 pinctrl-single,pins = <
 359                         OMAP3_CORE1_IOPAD(0x210c, PIN_OUTPUT | MUX_MODE7)       /* cam_hs */
 360                         OMAP3_CORE1_IOPAD(0x210e, PIN_OUTPUT | MUX_MODE7)       /* cam_vs */
 361                         OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0)       /* cam_xclka */
 362                         OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE7)       /* cam_d4 */
 363                         OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0)        /* cam_d6 */
 364                         OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0)        /* cam_d7 */
 365                         OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE0)        /* cam_d8 */
 366                         OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE0)        /* cam_d9 */
 367                         OMAP3_CORE1_IOPAD(0x212a, PIN_OUTPUT | MUX_MODE7)       /* cam_d10 */
 368                         OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE7)       /* cam_xclkb */
 369                         OMAP3_CORE1_IOPAD(0x2132, PIN_OUTPUT | MUX_MODE0)       /* cam_strobe */
 370                 >;
 371         };
 372 };
 373
 374 &i2c1 {
 375         pinctrl-names = "default";
 376         pinctrl-0 = <&i2c1_pins>;
 377
 378         clock-frequency = <2200000>;
 379
 380         twl: twl@48 {
 381                 reg = <0x48>;
 382                 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 383                 interrupt-parent = <&intc>;
 384         };
 385 };
 386
 387 #include "twl4030.dtsi"
 388 #include "twl4030_omap3.dtsi"
 389
 390 &vaux1 {
 391         regulator-name = "V28";
 392         regulator-min-microvolt = <2800000>;
 393         regulator-max-microvolt = <2800000>;
 394         regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 395         regulator-always-on; /* due to battery cover sensor */
 396 };
 397
 398 &vaux2 {
 399         regulator-name = "VCSI";
 400         regulator-min-microvolt = <1800000>;
 401         regulator-max-microvolt = <1800000>;
 402         regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 403 };
 404
 405 &vaux3 {
 406         regulator-name = "VMMC2_30";
 407         regulator-min-microvolt = <2800000>;
 408         regulator-max-microvolt = <3000000>;
 409         regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 410 };
 411
 412 &vaux4 {
 413         regulator-name = "VCAM_ANA_28";
 414         regulator-min-microvolt = <2800000>;
 415         regulator-max-microvolt = <2800000>;
 416         regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 417 };
 418
 419 &vmmc1 {
 420         regulator-name = "VMMC1";
 421         regulator-min-microvolt = <1850000>;
 422         regulator-max-microvolt = <3150000>;
 423         regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 424 };
 425
 426 &vmmc2 {
 427         regulator-name = "V28_A";
 428         regulator-min-microvolt = <2800000>;
 429         regulator-max-microvolt = <3000000>;
 430         regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 431         regulator-always-on; /* due VIO leak to AIC34 VDDs */
 432 };
 433
 434 &vpll1 {
 435         regulator-name = "VPLL";
 436         regulator-min-microvolt = <1800000>;
 437         regulator-max-microvolt = <1800000>;
 438         regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 439         regulator-always-on;
 440 };
 441
 442 &vpll2 {
 443         regulator-name = "VSDI_CSI";
 444         regulator-min-microvolt = <1800000>;
 445         regulator-max-microvolt = <1800000>;
 446         regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 447         regulator-always-on;
 448 };
 449
 450 &vsim {
 451         regulator-name = "VMMC2_IO_18";
 452         regulator-min-microvolt = <1800000>;
 453         regulator-max-microvolt = <1800000>;
 454         regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 455 };
 456
 457 &vio {
 458         regulator-name = "VIO";
 459         regulator-min-microvolt = <1800000>;
 460         regulator-max-microvolt = <1800000>;
 461 };
 462
 463 &vintana1 {
 464         regulator-name = "VINTANA1";
 465         /* fixed to 1500000 */
 466         regulator-always-on;
 467 };
 468
 469 &vintana2 {
 470         regulator-name = "VINTANA2";
 471         regulator-min-microvolt = <2750000>;
 472         regulator-max-microvolt = <2750000>;
 473         regulator-always-on;
 474 };
 475
 476 &vintdig {
 477         regulator-name = "VINTDIG";
 478         /* fixed to 1500000 */
 479         regulator-always-on;
 480 };
 481
 482 &twl {
 483         twl_audio: audio {
 484                 compatible = "ti,twl4030-audio";
 485                 ti,enable-vibra = <1>;
 486         };
 487
 488         twl_power: power {
 489                 compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
 490                 ti,use_poweroff;
 491         };
 492 };
 493
 494 &twl_keypad {
 495         linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q)
 496                          MATRIX_KEY(0x00, 0x01, KEY_O)
 497                          MATRIX_KEY(0x00, 0x02, KEY_P)
 498                          MATRIX_KEY(0x00, 0x03, KEY_COMMA)
 499                          MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE)
 500                          MATRIX_KEY(0x00, 0x06, KEY_A)
 501                          MATRIX_KEY(0x00, 0x07, KEY_S)
 502
 503                          MATRIX_KEY(0x01, 0x00, KEY_W)
 504                          MATRIX_KEY(0x01, 0x01, KEY_D)
 505                          MATRIX_KEY(0x01, 0x02, KEY_F)
 506                          MATRIX_KEY(0x01, 0x03, KEY_G)
 507                          MATRIX_KEY(0x01, 0x04, KEY_H)
 508                          MATRIX_KEY(0x01, 0x05, KEY_J)
 509                          MATRIX_KEY(0x01, 0x06, KEY_K)
 510                          MATRIX_KEY(0x01, 0x07, KEY_L)
 511
 512                          MATRIX_KEY(0x02, 0x00, KEY_E)
 513                          MATRIX_KEY(0x02, 0x01, KEY_DOT)
 514                          MATRIX_KEY(0x02, 0x02, KEY_UP)
 515                          MATRIX_KEY(0x02, 0x03, KEY_ENTER)
 516                          MATRIX_KEY(0x02, 0x05, KEY_Z)
 517                          MATRIX_KEY(0x02, 0x06, KEY_X)
 518                          MATRIX_KEY(0x02, 0x07, KEY_C)
 519                          MATRIX_KEY(0x02, 0x08, KEY_F9)
 520
 521                          MATRIX_KEY(0x03, 0x00, KEY_R)
 522                          MATRIX_KEY(0x03, 0x01, KEY_V)
 523                          MATRIX_KEY(0x03, 0x02, KEY_B)
 524                          MATRIX_KEY(0x03, 0x03, KEY_N)
 525                          MATRIX_KEY(0x03, 0x04, KEY_M)
 526                          MATRIX_KEY(0x03, 0x05, KEY_SPACE)
 527                          MATRIX_KEY(0x03, 0x06, KEY_SPACE)
 528                          MATRIX_KEY(0x03, 0x07, KEY_LEFT)
 529
 530                          MATRIX_KEY(0x04, 0x00, KEY_T)
 531                          MATRIX_KEY(0x04, 0x01, KEY_DOWN)
 532                          MATRIX_KEY(0x04, 0x02, KEY_RIGHT)
 533                          MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL)
 534                          MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT)
 535                          MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT)
 536                          MATRIX_KEY(0x04, 0x08, KEY_F10)
 537
 538                          MATRIX_KEY(0x05, 0x00, KEY_Y)
 539                          MATRIX_KEY(0x05, 0x08, KEY_F11)
 540
 541                          MATRIX_KEY(0x06, 0x00, KEY_U)
 542
 543                          MATRIX_KEY(0x07, 0x00, KEY_I)
 544                          MATRIX_KEY(0x07, 0x01, KEY_F7)
 545                          MATRIX_KEY(0x07, 0x02, KEY_F8)
 546                          >;
 547 };
 548
 549 &twl_gpio {
 550         ti,pullups      = <0x0>;
 551         ti,pulldowns    = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
 552 };
 553
 554 &i2c2 {
 555         pinctrl-names = "default";
 556         pinctrl-0 = <&i2c2_pins>;
 557
 558         clock-frequency = <100000>;
 559
 560         tlv320aic3x: tlv320aic3x@18 {
 561                 compatible = "ti,tlv320aic3x";
 562                 reg = <0x18>;
 563                 reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
 564                 ai3x-gpio-func = <
 565                         0 /* AIC3X_GPIO1_FUNC_DISABLED */
 566                         5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
 567                 >;
 568
 569                 AVDD-supply = <&vmmc2>;
 570                 DRVDD-supply = <&vmmc2>;
 571                 IOVDD-supply = <&vio>;
 572                 DVDD-supply = <&vio>;
 573
 574                 ai3x-micbias-vg = <1>;
 575         };
 576
 577         tlv320aic3x_aux: tlv320aic3x@19 {
 578                 compatible = "ti,tlv320aic3x";
 579                 reg = <0x19>;
 580                 reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
 581
 582                 AVDD-supply = <&vmmc2>;
 583                 DRVDD-supply = <&vmmc2>;
 584                 IOVDD-supply = <&vio>;
 585                 DVDD-supply = <&vio>;
 586
 587                 ai3x-micbias-vg = <2>;
 588         };
 589
 590         tsl2563: tsl2563@29 {
 591                 compatible = "amstaos,tsl2563";
 592                 reg = <0x29>;
 593
 594                 amstaos,cover-comp-gain = <16>;
 595         };
 596
 597         adp1653: led-controller@30 {
 598                 compatible = "adi,adp1653";
 599                 reg = <0x30>;
 600                 enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
 601
 602                 flash {
 603                         flash-timeout-us = <500000>;
 604                         flash-max-microamp = <320000>;
 605                         led-max-microamp = <50000>;
 606                 };
 607                 indicator {
 608                         led-max-microamp = <17500>;
 609                 };
 610         };
 611
 612         lp5523: lp5523@32 {
 613                 compatible = "national,lp5523";
 614                 reg = <0x32>;
 615                 clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
 616                 enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
 617
 618                 chan0 {
 619                         chan-name = "lp5523:kb1";
 620                         led-cur = /bits/ 8 <50>;
 621                         max-cur = /bits/ 8 <100>;
 622                 };
 623
 624                 chan1 {
 625                         chan-name = "lp5523:kb2";
 626                         led-cur = /bits/ 8 <50>;
 627                         max-cur = /bits/ 8 <100>;
 628                 };
 629
 630                 chan2 {
 631                         chan-name = "lp5523:kb3";
 632                         led-cur = /bits/ 8 <50>;
 633                         max-cur = /bits/ 8 <100>;
 634                 };
 635
 636                 chan3 {
 637                         chan-name = "lp5523:kb4";
 638                         led-cur = /bits/ 8 <50>;
 639                         max-cur = /bits/ 8 <100>;
 640                 };
 641
 642                 chan4 {
 643                         chan-name = "lp5523:b";
 644                         led-cur = /bits/ 8 <50>;
 645                         max-cur = /bits/ 8 <100>;
 646                 };
 647
 648                 chan5 {
 649                         chan-name = "lp5523:g";
 650                         led-cur = /bits/ 8 <50>;
 651                         max-cur = /bits/ 8 <100>;
 652                 };
 653
 654                 chan6 {
 655                         chan-name = "lp5523:r";
 656                         led-cur = /bits/ 8 <50>;
 657                         max-cur = /bits/ 8 <100>;
 658                 };
 659
 660                 chan7 {
 661                         chan-name = "lp5523:kb5";
 662                         led-cur = /bits/ 8 <50>;
 663                         max-cur = /bits/ 8 <100>;
 664                 };
 665
 666                 chan8 {
 667                         chan-name = "lp5523:kb6";
 668                         led-cur = /bits/ 8 <50>;
 669                         max-cur = /bits/ 8 <100>;
 670                 };
 671         };
 672
 673         bq27200: bq27200@55 {
 674                 compatible = "ti,bq27200";
 675                 reg = <0x55>;
 676         };
 677
 678         /* Stereo headphone amplifier */
 679         tpa6130a2: tpa6130a2@60 {
 680                 compatible = "ti,tpa6130a2";
 681                 reg = <0x60>;
 682
 683                 Vdd-supply = <&vmmc2>;
 684
 685                 power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
 686         };
 687
 688         si4713: si4713@63 {
 689                 compatible = "silabs,si4713";
 690                 reg = <0x63>;
 691
 692                 interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
 693                 reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
 694                 vio-supply = <&vio>;
 695                 vdd-supply = <&vaux1>;
 696         };
 697
 698         bq24150a: bq24150a@6b {
 699                 compatible = "ti,bq24150a";
 700                 reg = <0x6b>;
 701
 702                 ti,current-limit = <100>;
 703                 ti,weak-battery-voltage = <3400>;
 704                 ti,battery-regulation-voltage = <4200>;
 705                 ti,charge-current = <650>;
 706                 ti,termination-current = <100>;
 707                 ti,resistor-sense = <68>;
 708
 709                 ti,usb-charger-detection = <&isp1707>;
 710         };
 711 };
 712
 713 &i2c3 {
 714         pinctrl-names = "default";
 715         pinctrl-0 = <&i2c3_pins>;
 716
 717         clock-frequency = <400000>;
 718
 719         lis302dl: lis3lv02d@1d {
 720                 compatible = "st,lis3lv02d";
 721                 reg = <0x1d>;
 722
 723                 Vdd-supply = <&vaux1>;
 724                 Vdd_IO-supply = <&vio>;
 725
 726                 interrupt-parent = <&gpio6>;
 727                 interrupts = <21 20>; /* 181 and 180 */
 728
 729                 /* click flags */
 730                 st,click-single-x;
 731                 st,click-single-y;
 732                 st,click-single-z;
 733
 734                 /* Limits are 0.5g * value */
 735                 st,click-threshold-x = <8>;
 736                 st,click-threshold-y = <8>;
 737                 st,click-threshold-z = <10>;
 738
 739                 /* Click must be longer than time limit */
 740                 st,click-time-limit = <9>;
 741
 742                 /* Kind of debounce filter */
 743                 st,click-latency = <50>;
 744
 745                 /* Interrupt line 2 for click detection */
 746                 st,irq2-click;
 747
 748                 st,wakeup-x-hi;
 749                 st,wakeup-y-hi;
 750                 st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
 751
 752                 st,wakeup2-z-hi;
 753                 st,wakeup2-threshold = <(900/18)>; /* millig-value / 18 to get HW values */
 754
 755                 st,hipass1-disable;
 756                 st,hipass2-disable;
 757
 758                 st,axis-x = <1>;    /* LIS3_DEV_X */
 759                 st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */
 760                 st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
 761
 762                 st,min-limit-x = <(-32)>;
 763                 st,min-limit-y = <3>;
 764                 st,min-limit-z = <3>;
 765
 766                 st,max-limit-x = <(-3)>;
 767                 st,max-limit-y = <32>;
 768                 st,max-limit-z = <32>;
 769         };
 770
 771         cam1: camera@3e {
 772                 compatible = "toshiba,et8ek8";
 773                 reg = <0x3e>;
 774
 775                 vana-supply = <&vaux4>;
 776
 777                 clocks = <&isp 0>;
 778                 clock-names = "extclk";
 779                 clock-frequency = <9600000>;
 780
 781                 reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
 782
 783                 lens-focus = <&ad5820>;
 784
 785                 port {
 786                         csi_cam1: endpoint {
 787                                 bus-type = <3>; /* CCP2 */
 788                                 strobe = <1>;
 789                                 clock-inv = <0>;
 790                                 crc = <1>;
 791
 792                                 remote-endpoint = <&csi_isp>;
 793                         };
 794                 };
 795         };
 796
 797         /* D/A converter for auto-focus */
 798         ad5820: dac@c {
 799                 compatible = "adi,ad5820";
 800                 reg = <0x0c>;
 801
 802                 VANA-supply = <&vaux4>;
 803
 804                 #io-channel-cells = <0>;
 805         };
 806 };
 807
 808 &mmc1 {
 809         pinctrl-names = "default";
 810         pinctrl-0 = <&mmc1_pins>;
 811         vmmc-supply = <&vmmc1>;
 812         bus-width = <4>;
 813         /* For debugging, it is often good idea to remove this GPIO.
 814            It means you can remove back cover (to reboot by removing
 815            battery) and still use the MMC card. */
 816         cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
 817 };
 818
 819 /* most boards use vaux3, only some old versions use vmmc2 instead */
 820 &mmc2 {
 821         pinctrl-names = "default";
 822         pinctrl-0 = <&mmc2_pins>;
 823         vmmc-supply = <&vaux3>;
 824         vqmmc-supply = <&vsim>;
 825         bus-width = <8>;
 826         non-removable;
 827         no-sdio;
 828         no-sd;
 829 };
 830
 831 &mmc3 {
 832         status = "disabled";
 833 };
 834
 835 &gpmc {
 836         ranges = <0 0 0x01000000 0x01000000>,   /* 16 MB for OneNAND */
 837                  <1 0 0x02000000 0x01000000>;   /* 16 MB for smc91c96 */
 838         pinctrl-names = "default";
 839         pinctrl-0 = <&gpmc_pins>;
 840
 841         /* sys_ndmareq1 could be used by the driver, not as gpio65 though */
 842         onenand@0,0 {
 843                 #address-cells = <1>;
 844                 #size-cells = <1>;
 845                 compatible = "ti,omap2-onenand";
 846                 reg = <0 0 0x20000>;    /* CS0, offset 0, IO size 128K */
 847
 848                 gpmc,sync-read;
 849                 gpmc,sync-write;
 850                 gpmc,burst-length = <16>;
 851                 gpmc,burst-read;
 852                 gpmc,burst-wrap;
 853                 gpmc,burst-write;
 854                 gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
 855                 gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
 856                 gpmc,cs-on-ns = <0>;
 857                 gpmc,cs-rd-off-ns = <87>;
 858                 gpmc,cs-wr-off-ns = <87>;
 859                 gpmc,adv-on-ns = <0>;
 860                 gpmc,adv-rd-off-ns = <10>;
 861                 gpmc,adv-wr-off-ns = <10>;
 862                 gpmc,oe-on-ns = <15>;
 863                 gpmc,oe-off-ns = <87>;
 864                 gpmc,we-on-ns = <0>;
 865                 gpmc,we-off-ns = <87>;
 866                 gpmc,rd-cycle-ns = <112>;
 867                 gpmc,wr-cycle-ns = <112>;
 868                 gpmc,access-ns = <81>;
 869                 gpmc,page-burst-access-ns = <15>;
 870                 gpmc,bus-turnaround-ns = <0>;
 871                 gpmc,cycle2cycle-delay-ns = <0>;
 872                 gpmc,wait-monitoring-ns = <0>;
 873                 gpmc,clk-activation-ns = <5>;
 874                 gpmc,wr-data-mux-bus-ns = <30>;
 875                 gpmc,wr-access-ns = <81>;
 876                 gpmc,sync-clk-ps = <15000>;
 877
 878                 /*
 879                  * MTD partition table corresponding to Nokia's
 880                  * Maemo 5 (Fremantle) release.
 881                  */
 882                 partition@0 {
 883                         label = "bootloader";
 884                         reg = <0x00000000 0x00020000>;
 885                         read-only;
 886                 };
 887                 partition@1 {
 888                         label = "config";
 889                         reg = <0x00020000 0x00060000>;
 890                 };
 891                 partition@2 {
 892                         label = "log";
 893                         reg = <0x00080000 0x00040000>;
 894                 };
 895                 partition@3 {
 896                         label = "kernel";
 897                         reg = <0x000c0000 0x00200000>;
 898                 };
 899                 partition@4 {
 900                         label = "initfs";
 901                         reg = <0x002c0000 0x00200000>;
 902                 };
 903                 partition@5 {
 904                         label = "rootfs";
 905                         reg = <0x004c0000 0x0fb40000>;
 906                 };
 907         };
 908
 909         /* Ethernet is on some early development boards and qemu */
 910         ethernet@gpmc {
 911                 compatible = "smsc,lan91c94";
 912                 interrupt-parent = <&gpio2>;
 913                 interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;  /* gpio54 */
 914                 reg = <1 0 0xf>;                /* 16 byte IO range */
 915                 bank-width = <2>;
 916                 pinctrl-names = "default";
 917                 pinctrl-0 = <&ethernet_pins>;
 918                 power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;     /* gpio86 */
 919                 reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;      /* gpio164 */
 920                 gpmc,device-width = <2>;
 921                 gpmc,sync-clk-ps = <0>;
 922                 gpmc,cs-on-ns = <0>;
 923                 gpmc,cs-rd-off-ns = <48>;
 924                 gpmc,cs-wr-off-ns = <24>;
 925                 gpmc,adv-on-ns = <0>;
 926                 gpmc,adv-rd-off-ns = <0>;
 927                 gpmc,adv-wr-off-ns = <0>;
 928                 gpmc,we-on-ns = <12>;
 929                 gpmc,we-off-ns = <18>;
 930                 gpmc,oe-on-ns = <12>;
 931                 gpmc,oe-off-ns = <48>;
 932                 gpmc,page-burst-access-ns = <0>;
 933                 gpmc,access-ns = <42>;
 934                 gpmc,rd-cycle-ns = <180>;
 935                 gpmc,wr-cycle-ns = <180>;
 936                 gpmc,bus-turnaround-ns = <0>;
 937                 gpmc,cycle2cycle-delay-ns = <0>;
 938                 gpmc,wait-monitoring-ns = <0>;
 939                 gpmc,clk-activation-ns = <0>;
 940                 gpmc,wr-access-ns = <0>;
 941                 gpmc,wr-data-mux-bus-ns = <12>;
 942         };
 943 };
 944
 945 &mcspi1 {
 946         /*
 947          * For some reason, touchscreen is necessary for screen to work at
 948          * all on real hw. It works well without it on emulator.
 949          *
 950          * Also... order in the device tree actually matters here.
 951          */
 952         tsc2005@0 {
 953                 compatible = "ti,tsc2005";
 954                 spi-max-frequency = <6000000>;
 955                 reg = <0>;
 956
 957                 vio-supply = <&vio>;
 958
 959                 reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
 960                 interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
 961
 962                 touchscreen-fuzz-x = <4>;
 963                 touchscreen-fuzz-y = <7>;
 964                 touchscreen-fuzz-pressure = <2>;
 965                 touchscreen-size-x = <4096>;
 966                 touchscreen-size-y = <4096>;
 967                 touchscreen-max-pressure = <2048>;
 968
 969                 ti,x-plate-ohms = <280>;
 970                 ti,esd-recovery-timeout-ms = <8000>;
 971         };
 972
 973         lcd: acx565akm@2 {
 974                 compatible = "sony,acx565akm";
 975                 spi-max-frequency = <6000000>;
 976                 reg = <2>;
 977
 978                 pinctrl-names = "default";
 979                 pinctrl-0 = <&acx565akm_pins>;
 980
 981                 label = "lcd";
 982                 reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
 983
 984                 port {
 985                         lcd_in: endpoint {
 986                                 remote-endpoint = <&sdi_out>;
 987                         };
 988                 };
 989         };
 990 };
 991
 992 &mcspi4 {
 993         pinctrl-names = "default";
 994         pinctrl-0 = <&mcspi4_pins>;
 995
 996         wl1251@0 {
 997                 pinctrl-names = "default";
 998                 pinctrl-0 = <&wl1251_pins>;
 999
1000                 vio-supply = <&vio>;
1001
1002                 compatible = "ti,wl1251";
1003                 reg = <0>;
1004                 spi-max-frequency = <48000000>;
1005
1006                 spi-cpol;
1007                 spi-cpha;
1008
1009                 ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
1010
1011                 interrupt-parent = <&gpio2>;
1012                 interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
1013
1014                 clocks = <&vctcxo>;
1015         };
1016 };
1017
1018 &usb_otg_hs {
1019         interface-type = <0>;
1020         usb-phy = <&usb2_phy>;
1021         phys = <&usb2_phy>;
1022         phy-names = "usb2-phy";
1023         mode = <2>;
1024         power = <50>;
1025 };
1026
1027 &uart1 {
1028         status = "disabled";
1029 };
1030
1031 &uart2 {
1032         pinctrl-names = "default";
1033         pinctrl-0 = <&uart2_pins>;
1034
1035         bcm2048: bluetooth {
1036                 compatible = "brcm,bcm2048-nokia", "nokia,h4p-bluetooth";
1037                 reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; /* 91 */
1038                 host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */
1039                 bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */
1040                 clocks = <&vctcxo>;
1041                 clock-names = "sysclk";
1042         };
1043 };
1044
1045 &uart3 {
1046         interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
1047         pinctrl-names = "default";
1048         pinctrl-0 = <&uart3_pins>;
1049 };
1050
1051 &dss {
1052         status = "ok";
1053
1054         pinctrl-names = "default";
1055         pinctrl-0 = <&dss_sdi_pins>;
1056
1057         vdds_sdi-supply = <&vaux1>;
1058
1059         ports {
1060                 #address-cells = <1>;
1061                 #size-cells = <0>;
1062
1063                 port@1 {
1064                         reg = <1>;
1065
1066                         sdi_out: endpoint {
1067                                 remote-endpoint = <&lcd_in>;
1068                                 datapairs = <2>;
1069                         };
1070                 };
1071         };
1072 };
1073
1074 &venc {
1075         status = "ok";
1076
1077         vdda-supply = <&vdac>;
1078
1079         port {
1080                 venc_out: endpoint {
1081                         remote-endpoint = <&tv_connector_in>;
1082                         ti,channels = <1>;
1083                 };
1084         };
1085 };
1086
1087 &mcbsp2 {
1088         status = "ok";
1089 };
1090
1091 &ssi_port1 {
1092         pinctrl-names = "default";
1093         pinctrl-0 = <&ssi_pins>;
1094
1095         ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
1096
1097         modem: hsi-client {
1098                 compatible = "nokia,n900-modem";
1099
1100                 pinctrl-names = "default";
1101                 pinctrl-0 = <&modem_pins>;
1102
1103                 hsi-channel-ids = <0>, <1>, <2>, <3>;
1104                 hsi-channel-names = "mcsaab-control",
1105                                     "speech-control",
1106                                     "speech-data",
1107                                     "mcsaab-data";
1108                 hsi-speed-kbps = <55000>;
1109                 hsi-mode = "frame";
1110                 hsi-flow = "synchronized";
1111                 hsi-arb-mode = "round-robin";
1112
1113                 interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
1114
1115                 gpios = <&gpio3  6 GPIO_ACTIVE_HIGH>, /* 70 */
1116                         <&gpio3  9 GPIO_ACTIVE_HIGH>, /* 73 */
1117                         <&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
1118                         <&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
1119                         <&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
1120                 gpio-names = "cmt_apeslpx",
1121                              "cmt_rst_rq",
1122                              "cmt_en",
1123                              "cmt_rst",
1124                              "cmt_bsi";
1125         };
1126 };
1127
1128 &ssi_port2 {
1129         status = "disabled";
1130 };