sys/gnu/dts/arm/r8a7791-koelsch.dts

   1 /*
   2  * Device Tree Source for the Koelsch board
   3  *
   4  * Copyright (C) 2013 Renesas Electronics Corporation
   5  * Copyright (C) 2013-2014 Renesas Solutions Corp.
   6  * Copyright (C) 2014 Cogent Embedded, Inc.
   7  *
   8  * This file is licensed under the terms of the GNU General Public License
   9  * version 2.  This program is licensed "as is" without any warranty of any
  10  * kind, whether express or implied.
  11  */
  12
  13 /*
  14  * SSI-AK4643
  15  *
  16  * SW1: 1: AK4643
  17  *      2: CN22
  18  *      3: ADV7511
  19  *
  20  * This command is required when Playback/Capture
  21  *
  22  *      amixer set "LINEOUT Mixer DACL" on
  23  *      amixer set "DVC Out" 100%
  24  *      amixer set "DVC In" 100%
  25  *
  26  * You can use Mute
  27  *
  28  *      amixer set "DVC Out Mute" on
  29  *      amixer set "DVC In Mute" on
  30  *
  31  * You can use Volume Ramp
  32  *
  33  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
  34  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
  35  *      amixer set "DVC Out Ramp" on
  36  *      aplay xxx.wav &
  37  *      amixer set "DVC Out"  80%  // Volume Down
  38  *      amixer set "DVC Out" 100%  // Volume Up
  39  */
  40
  41 /dts-v1/;
  42 #include "r8a7791.dtsi"
  43 #include <dt-bindings/gpio/gpio.h>
  44 #include <dt-bindings/input/input.h>
  45
  46 / {
  47         model = "Koelsch";
  48         compatible = "renesas,koelsch", "renesas,r8a7791";
  49
  50         aliases {
  51                 serial0 = &scif0;
  52                 serial1 = &scif1;
  53                 i2c9 = &gpioi2c1;
  54                 i2c12 = &i2cexio1;
  55         };
  56
  57         chosen {
  58                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
  59                 stdout-path = "serial0:115200n8";
  60         };
  61
  62         memory@40000000 {
  63                 device_type = "memory";
  64                 reg = <0 0x40000000 0 0x40000000>;
  65         };
  66
  67         memory@200000000 {
  68                 device_type = "memory";
  69                 reg = <2 0x00000000 0 0x40000000>;
  70         };
  71
  72         lbsc {
  73                 #address-cells = <1>;
  74                 #size-cells = <1>;
  75         };
  76
  77         keyboard {
  78                 compatible = "gpio-keys";
  79
  80                 key-1 {
  81                         gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
  82                         linux,code = <KEY_1>;
  83                         label = "SW2-1";
  84                         wakeup-source;
  85                         debounce-interval = <20>;
  86                 };
  87                 key-2 {
  88                         gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
  89                         linux,code = <KEY_2>;
  90                         label = "SW2-2";
  91                         wakeup-source;
  92                         debounce-interval = <20>;
  93                 };
  94                 key-3 {
  95                         gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
  96                         linux,code = <KEY_3>;
  97                         label = "SW2-3";
  98                         wakeup-source;
  99                         debounce-interval = <20>;
 100                 };
 101                 key-4 {
 102                         gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
 103                         linux,code = <KEY_4>;
 104                         label = "SW2-4";
 105                         wakeup-source;
 106                         debounce-interval = <20>;
 107                 };
 108                 key-a {
 109                         gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 110                         linux,code = <KEY_A>;
 111                         label = "SW30";
 112                         wakeup-source;
 113                         debounce-interval = <20>;
 114                 };
 115                 key-b {
 116                         gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
 117                         linux,code = <KEY_B>;
 118                         label = "SW31";
 119                         wakeup-source;
 120                         debounce-interval = <20>;
 121                 };
 122                 key-c {
 123                         gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 124                         linux,code = <KEY_C>;
 125                         label = "SW32";
 126                         wakeup-source;
 127                         debounce-interval = <20>;
 128                 };
 129                 key-d {
 130                         gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 131                         linux,code = <KEY_D>;
 132                         label = "SW33";
 133                         wakeup-source;
 134                         debounce-interval = <20>;
 135                 };
 136                 key-e {
 137                         gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
 138                         linux,code = <KEY_E>;
 139                         label = "SW34";
 140                         wakeup-source;
 141                         debounce-interval = <20>;
 142                 };
 143                 key-f {
 144                         gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
 145                         linux,code = <KEY_F>;
 146                         label = "SW35";
 147                         wakeup-source;
 148                         debounce-interval = <20>;
 149                 };
 150                 key-g {
 151                         gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 152                         linux,code = <KEY_G>;
 153                         label = "SW36";
 154                         wakeup-source;
 155                         debounce-interval = <20>;
 156                 };
 157         };
 158
 159         leds {
 160                 compatible = "gpio-leds";
 161                 led6 {
 162                         gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 163                         label = "LED6";
 164                 };
 165                 led7 {
 166                         gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
 167                         label = "LED7";
 168                 };
 169                 led8 {
 170                         gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 171                         label = "LED8";
 172                 };
 173         };
 174
 175         vcc_sdhi0: regulator-vcc-sdhi0 {
 176                 compatible = "regulator-fixed";
 177
 178                 regulator-name = "SDHI0 Vcc";
 179                 regulator-min-microvolt = <3300000>;
 180                 regulator-max-microvolt = <3300000>;
 181
 182                 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
 183                 enable-active-high;
 184         };
 185
 186         vccq_sdhi0: regulator-vccq-sdhi0 {
 187                 compatible = "regulator-gpio";
 188
 189                 regulator-name = "SDHI0 VccQ";
 190                 regulator-min-microvolt = <1800000>;
 191                 regulator-max-microvolt = <3300000>;
 192
 193                 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
 194                 gpios-states = <1>;
 195                 states = <3300000 1
 196                           1800000 0>;
 197         };
 198
 199         vcc_sdhi1: regulator-vcc-sdhi1 {
 200                 compatible = "regulator-fixed";
 201
 202                 regulator-name = "SDHI1 Vcc";
 203                 regulator-min-microvolt = <3300000>;
 204                 regulator-max-microvolt = <3300000>;
 205
 206                 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
 207                 enable-active-high;
 208         };
 209
 210         vccq_sdhi1: regulator-vccq-sdhi1 {
 211                 compatible = "regulator-gpio";
 212
 213                 regulator-name = "SDHI1 VccQ";
 214                 regulator-min-microvolt = <1800000>;
 215                 regulator-max-microvolt = <3300000>;
 216
 217                 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
 218                 gpios-states = <1>;
 219                 states = <3300000 1
 220                           1800000 0>;
 221         };
 222
 223         vcc_sdhi2: regulator-vcc-sdhi2 {
 224                 compatible = "regulator-fixed";
 225
 226                 regulator-name = "SDHI2 Vcc";
 227                 regulator-min-microvolt = <3300000>;
 228                 regulator-max-microvolt = <3300000>;
 229
 230                 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
 231                 enable-active-high;
 232         };
 233
 234         vccq_sdhi2: regulator-vccq-sdhi2 {
 235                 compatible = "regulator-gpio";
 236
 237                 regulator-name = "SDHI2 VccQ";
 238                 regulator-min-microvolt = <1800000>;
 239                 regulator-max-microvolt = <3300000>;
 240
 241                 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 242                 gpios-states = <1>;
 243                 states = <3300000 1
 244                           1800000 0>;
 245         };
 246
 247         audio_clock: audio_clock {
 248                 compatible = "fixed-clock";
 249                 #clock-cells = <0>;
 250                 clock-frequency = <11289600>;
 251         };
 252
 253         rsnd_ak4643: sound {
 254                 compatible = "simple-audio-card";
 255
 256                 simple-audio-card,format = "left_j";
 257                 simple-audio-card,bitclock-master = <&sndcodec>;
 258                 simple-audio-card,frame-master = <&sndcodec>;
 259
 260                 sndcpu: simple-audio-card,cpu {
 261                         sound-dai = <&rcar_sound>;
 262                 };
 263
 264                 sndcodec: simple-audio-card,codec {
 265                         sound-dai = <&ak4643>;
 266                         clocks = <&audio_clock>;
 267                 };
 268         };
 269
 270         hdmi-in {
 271                 compatible = "hdmi-connector";
 272                 type = "a";
 273
 274                 port {
 275                         hdmi_con_in: endpoint {
 276                                 remote-endpoint = <&adv7612_in>;
 277                         };
 278                 };
 279         };
 280
 281         hdmi-out {
 282                 compatible = "hdmi-connector";
 283                 type = "a";
 284
 285                 port {
 286                         hdmi_con_out: endpoint {
 287                                 remote-endpoint = <&adv7511_out>;
 288                         };
 289                 };
 290         };
 291
 292         x2_clk: x2-clock {
 293                 compatible = "fixed-clock";
 294                 #clock-cells = <0>;
 295                 clock-frequency = <148500000>;
 296         };
 297
 298         x13_clk: x13-clock {
 299                 compatible = "fixed-clock";
 300                 #clock-cells = <0>;
 301                 clock-frequency = <148500000>;
 302         };
 303
 304         gpioi2c1: i2c-9 {
 305                 #address-cells = <1>;
 306                 #size-cells = <0>;
 307                 compatible = "i2c-gpio";
 308                 status = "disabled";
 309                 gpios = <&gpio7 16 GPIO_ACTIVE_HIGH /* sda */
 310                          &gpio7 15 GPIO_ACTIVE_HIGH /* scl */
 311                         >;
 312                 i2c-gpio,delay-us = <5>;
 313         };
 314
 315         /*
 316          * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
 317          * A fallback to GPIO is provided.
 318          */
 319         i2cexio1: i2c-12 {
 320                 compatible = "i2c-demux-pinctrl";
 321                 i2c-parent = <&i2c1>, <&gpioi2c1>;
 322                 i2c-bus-name = "i2c-exio1";
 323                 #address-cells = <1>;
 324                 #size-cells = <0>;
 325         };
 326 };
 327
 328 &du {
 329         pinctrl-0 = <&du_pins>;
 330         pinctrl-names = "default";
 331         status = "okay";
 332
 333         clocks = <&mstp7_clks R8A7791_CLK_DU0>,
 334                  <&mstp7_clks R8A7791_CLK_DU1>,
 335                  <&mstp7_clks R8A7791_CLK_LVDS0>,
 336                  <&x13_clk>, <&x2_clk>;
 337         clock-names = "du.0", "du.1", "lvds.0",
 338                       "dclkin.0", "dclkin.1";
 339
 340         ports {
 341                 port@0 {
 342                         endpoint {
 343                                 remote-endpoint = <&adv7511_in>;
 344                         };
 345                 };
 346                 port@1 {
 347                         lvds_connector: endpoint {
 348                         };
 349                 };
 350         };
 351 };
 352
 353 &extal_clk {
 354         clock-frequency = <20000000>;
 355 };
 356
 357 &pfc {
 358         pinctrl-0 = <&scif_clk_pins>;
 359         pinctrl-names = "default";
 360
 361         i2c1_pins: i2c1 {
 362                 groups = "i2c1";
 363                 function = "i2c1";
 364         };
 365
 366         i2c2_pins: i2c2 {
 367                 groups = "i2c2";
 368                 function = "i2c2";
 369         };
 370
 371         du_pins: du {
 372                 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
 373                 function = "du";
 374         };
 375
 376         scif0_pins: scif0 {
 377                 groups = "scif0_data_d";
 378                 function = "scif0";
 379         };
 380
 381         scif1_pins: scif1 {
 382                 groups = "scif1_data_d";
 383                 function = "scif1";
 384         };
 385
 386         scif_clk_pins: scif_clk {
 387                 groups = "scif_clk";
 388                 function = "scif_clk";
 389         };
 390
 391         ether_pins: ether {
 392                 groups = "eth_link", "eth_mdio", "eth_rmii";
 393                 function = "eth";
 394         };
 395
 396         phy1_pins: phy1 {
 397                 groups = "intc_irq0";
 398                 function = "intc";
 399         };
 400
 401         sdhi0_pins: sd0 {
 402                 groups = "sdhi0_data4", "sdhi0_ctrl";
 403                 function = "sdhi0";
 404                 power-source = <3300>;
 405         };
 406
 407         sdhi0_pins_uhs: sd0_uhs {
 408                 groups = "sdhi0_data4", "sdhi0_ctrl";
 409                 function = "sdhi0";
 410                 power-source = <1800>;
 411         };
 412
 413         sdhi1_pins: sd1 {
 414                 groups = "sdhi1_data4", "sdhi1_ctrl";
 415                 function = "sdhi1";
 416                 power-source = <3300>;
 417         };
 418
 419         sdhi1_pins_uhs: sd1_uhs {
 420                 groups = "sdhi1_data4", "sdhi1_ctrl";
 421                 function = "sdhi1";
 422                 power-source = <1800>;
 423         };
 424
 425         sdhi2_pins: sd2 {
 426                 groups = "sdhi2_data4", "sdhi2_ctrl";
 427                 function = "sdhi2";
 428                 power-source = <3300>;
 429         };
 430
 431         sdhi2_pins_uhs: sd2_uhs {
 432                 groups = "sdhi2_data4", "sdhi2_ctrl";
 433                 function = "sdhi2";
 434                 power-source = <1800>;
 435         };
 436
 437         qspi_pins: qspi {
 438                 groups = "qspi_ctrl", "qspi_data4";
 439                 function = "qspi";
 440         };
 441
 442         msiof0_pins: msiof0 {
 443                 groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
 444                                  "msiof0_tx";
 445                 function = "msiof0";
 446         };
 447
 448         usb0_pins: usb0 {
 449                 groups = "usb0";
 450                 function = "usb0";
 451         };
 452
 453         usb1_pins: usb1 {
 454                 groups = "usb1";
 455                 function = "usb1";
 456         };
 457
 458         vin0_pins: vin0 {
 459                 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
 460                 function = "vin0";
 461         };
 462
 463         vin1_pins: vin1 {
 464                 groups = "vin1_data8", "vin1_clk";
 465                 function = "vin1";
 466         };
 467
 468         sound_pins: sound {
 469                 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
 470                 function = "ssi";
 471         };
 472
 473         sound_clk_pins: sound_clk {
 474                 groups = "audio_clk_a";
 475                 function = "audio_clk";
 476         };
 477 };
 478
 479 &ether {
 480         pinctrl-0 = <&ether_pins &phy1_pins>;
 481         pinctrl-names = "default";
 482
 483         phy-handle = <&phy1>;
 484         renesas,ether-link-active-low;
 485         status = "okay";
 486
 487         phy1: ethernet-phy@1 {
 488                 reg = <1>;
 489                 interrupt-parent = <&irqc0>;
 490                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 491                 micrel,led-mode = <1>;
 492         };
 493 };
 494
 495 &cmt0 {
 496         status = "okay";
 497 };
 498
 499 &sata0 {
 500         status = "okay";
 501 };
 502
 503 &scif0 {
 504         pinctrl-0 = <&scif0_pins>;
 505         pinctrl-names = "default";
 506
 507         status = "okay";
 508 };
 509
 510 &scif1 {
 511         pinctrl-0 = <&scif1_pins>;
 512         pinctrl-names = "default";
 513
 514         status = "okay";
 515 };
 516
 517 &scif_clk {
 518         clock-frequency = <14745600>;
 519         status = "okay";
 520 };
 521
 522 &sdhi0 {
 523         pinctrl-0 = <&sdhi0_pins>;
 524         pinctrl-1 = <&sdhi0_pins_uhs>;
 525         pinctrl-names = "default", "state_uhs";
 526
 527         vmmc-supply = <&vcc_sdhi0>;
 528         vqmmc-supply = <&vccq_sdhi0>;
 529         cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
 530         wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 531         sd-uhs-sdr50;
 532         sd-uhs-sdr104;
 533         status = "okay";
 534 };
 535
 536 &sdhi1 {
 537         pinctrl-0 = <&sdhi1_pins>;
 538         pinctrl-1 = <&sdhi1_pins_uhs>;
 539         pinctrl-names = "default", "state_uhs";
 540
 541         vmmc-supply = <&vcc_sdhi1>;
 542         vqmmc-supply = <&vccq_sdhi1>;
 543         cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 544         wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
 545         sd-uhs-sdr50;
 546         status = "okay";
 547 };
 548
 549 &sdhi2 {
 550         pinctrl-0 = <&sdhi2_pins>;
 551         pinctrl-1 = <&sdhi2_pins_uhs>;
 552         pinctrl-names = "default", "state_uhs";
 553
 554         vmmc-supply = <&vcc_sdhi2>;
 555         vqmmc-supply = <&vccq_sdhi2>;
 556         cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
 557         sd-uhs-sdr50;
 558         status = "okay";
 559 };
 560
 561 &qspi {
 562         pinctrl-0 = <&qspi_pins>;
 563         pinctrl-names = "default";
 564
 565         status = "okay";
 566
 567         flash: flash@0 {
 568                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
 569                 reg = <0>;
 570                 spi-max-frequency = <30000000>;
 571                 spi-tx-bus-width = <4>;
 572                 spi-rx-bus-width = <4>;
 573                 spi-cpha;
 574                 spi-cpol;
 575                 m25p,fast-read;
 576
 577                 partitions {
 578                         compatible = "fixed-partitions";
 579                         #address-cells = <1>;
 580                         #size-cells = <1>;
 581
 582                         partition@0 {
 583                                 label = "loader";
 584                                 reg = <0x00000000 0x00080000>;
 585                                 read-only;
 586                         };
 587                         partition@80000 {
 588                                 label = "user";
 589                                 reg = <0x00080000 0x00580000>;
 590                                 read-only;
 591                         };
 592                         partition@600000 {
 593                                 label = "flash";
 594                                 reg = <0x00600000 0x03a00000>;
 595                         };
 596                 };
 597         };
 598 };
 599
 600 &msiof0 {
 601         pinctrl-0 = <&msiof0_pins>;
 602         pinctrl-names = "default";
 603
 604         status = "okay";
 605
 606         pmic: pmic@0 {
 607                 compatible = "renesas,r2a11302ft";
 608                 reg = <0>;
 609                 spi-max-frequency = <6000000>;
 610                 spi-cpol;
 611                 spi-cpha;
 612         };
 613 };
 614
 615 &i2c1 {
 616         pinctrl-0 = <&i2c1_pins>;
 617         pinctrl-names = "i2c-exio1";
 618 };
 619
 620 &i2c2 {
 621         pinctrl-0 = <&i2c2_pins>;
 622         pinctrl-names = "default";
 623
 624         status = "okay";
 625         clock-frequency = <100000>;
 626
 627         ak4643: codec@12 {
 628                 compatible = "asahi-kasei,ak4643";
 629                 #sound-dai-cells = <0>;
 630                 reg = <0x12>;
 631         };
 632
 633         composite-in@20 {
 634                 compatible = "adi,adv7180";
 635                 reg = <0x20>;
 636                 remote = <&vin1>;
 637
 638                 port {
 639                         adv7180: endpoint {
 640                                 bus-width = <8>;
 641                                 remote-endpoint = <&vin1ep>;
 642                         };
 643                 };
 644         };
 645
 646         hdmi@39 {
 647                 compatible = "adi,adv7511w";
 648                 reg = <0x39>;
 649                 interrupt-parent = <&gpio3>;
 650                 interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 651
 652                 adi,input-depth = <8>;
 653                 adi,input-colorspace = "rgb";
 654                 adi,input-clock = "1x";
 655                 adi,input-style = <1>;
 656                 adi,input-justification = "evenly";
 657
 658                 ports {
 659                         #address-cells = <1>;
 660                         #size-cells = <0>;
 661
 662                         port@0 {
 663                                 reg = <0>;
 664                                 adv7511_in: endpoint {
 665                                         remote-endpoint = <&du_out_rgb>;
 666                                 };
 667                         };
 668
 669                         port@1 {
 670                                 reg = <1>;
 671                                 adv7511_out: endpoint {
 672                                         remote-endpoint = <&hdmi_con_out>;
 673                                 };
 674                         };
 675                 };
 676         };
 677
 678         hdmi-in@4c {
 679                 compatible = "adi,adv7612";
 680                 reg = <0x4c>;
 681                 interrupt-parent = <&gpio4>;
 682                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 683                 default-input = <0>;
 684
 685                 ports {
 686                         #address-cells = <1>;
 687                         #size-cells = <0>;
 688
 689                         port@0 {
 690                                 reg = <0>;
 691                                 adv7612_in: endpoint {
 692                                         remote-endpoint = <&hdmi_con_in>;
 693                                 };
 694                         };
 695
 696                         port@2 {
 697                                 reg = <2>;
 698                                 adv7612_out: endpoint {
 699                                         remote-endpoint = <&vin0ep2>;
 700                                 };
 701                         };
 702                 };
 703         };
 704
 705         eeprom@50 {
 706                 compatible = "renesas,24c02";
 707                 reg = <0x50>;
 708                 pagesize = <16>;
 709         };
 710 };
 711
 712 &i2c6 {
 713         status = "okay";
 714         clock-frequency = <100000>;
 715
 716         pmic@58 {
 717                 compatible = "dlg,da9063";
 718                 reg = <0x58>;
 719                 interrupt-parent = <&irqc0>;
 720                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 721                 interrupt-controller;
 722
 723                 rtc {
 724                         compatible = "dlg,da9063-rtc";
 725                 };
 726
 727                 wdt {
 728                         compatible = "dlg,da9063-watchdog";
 729                 };
 730         };
 731
 732         vdd_dvfs: regulator@68 {
 733                 compatible = "dlg,da9210";
 734                 reg = <0x68>;
 735                 interrupt-parent = <&irqc0>;
 736                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 737
 738                 regulator-min-microvolt = <1000000>;
 739                 regulator-max-microvolt = <1000000>;
 740                 regulator-boot-on;
 741                 regulator-always-on;
 742         };
 743 };
 744
 745 &pci0 {
 746         status = "okay";
 747         pinctrl-0 = <&usb0_pins>;
 748         pinctrl-names = "default";
 749 };
 750
 751 &pci1 {
 752         status = "okay";
 753         pinctrl-0 = <&usb1_pins>;
 754         pinctrl-names = "default";
 755 };
 756
 757 &hsusb {
 758         status = "okay";
 759         pinctrl-0 = <&usb0_pins>;
 760         pinctrl-names = "default";
 761         renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
 762 };
 763
 764 &usbphy {
 765         status = "okay";
 766 };
 767
 768 &pcie_bus_clk {
 769         clock-frequency = <100000000>;
 770         status = "okay";
 771 };
 772
 773 &pciec {
 774         status = "okay";
 775 };
 776
 777 &cpu0 {
 778         cpu0-supply = <&vdd_dvfs>;
 779 };
 780
 781 /* HDMI video input */
 782 &vin0 {
 783         status = "okay";
 784         pinctrl-0 = <&vin0_pins>;
 785         pinctrl-names = "default";
 786
 787         port {
 788                 #address-cells = <1>;
 789                 #size-cells = <0>;
 790
 791                 vin0ep2: endpoint {
 792                         remote-endpoint = <&adv7612_out>;
 793                         bus-width = <24>;
 794                         hsync-active = <0>;
 795                         vsync-active = <0>;
 796                         pclk-sample = <1>;
 797                         data-active = <1>;
 798                 };
 799         };
 800 };
 801
 802 /* composite video input */
 803 &vin1 {
 804         status = "okay";
 805         pinctrl-0 = <&vin1_pins>;
 806         pinctrl-names = "default";
 807
 808         port {
 809                 #address-cells = <1>;
 810                 #size-cells = <0>;
 811
 812                 vin1ep: endpoint {
 813                         remote-endpoint = <&adv7180>;
 814                         bus-width = <8>;
 815                 };
 816         };
 817 };
 818
 819 &rcar_sound {
 820         pinctrl-0 = <&sound_pins &sound_clk_pins>;
 821         pinctrl-names = "default";
 822
 823         /* Single DAI */
 824         #sound-dai-cells = <0>;
 825
 826         status = "okay";
 827
 828         rcar_sound,dai {
 829                 dai0 {
 830                         playback = <&ssi0 &src2 &dvc0>;
 831                         capture  = <&ssi1 &src3 &dvc1>;
 832                 };
 833         };
 834 };
 835
 836 &ssi1 {
 837         shared-pin;
 838 };