2 * Copyright 2013 Maxime Ripard
4 * Maxime Ripard <maxime.ripard@free-electrons.com>
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
23 * b) Permission is hereby granted, free of charge, to any person
24 * obtaining a copy of this software and associated documentation
25 * files (the "Software"), to deal in the Software without
26 * restriction, including without limitation the rights to use,
27 * copy, modify, merge, publish, distribute, sublicense, and/or
28 * sell copies of the Software, and to permit persons to whom the
29 * Software is furnished to do so, subject to the following
32 * The above copyright notice and this permission notice shall be
33 * included in all copies or substantial portions of the Software.
35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 * OTHER DEALINGS IN THE SOFTWARE.
46 #include "sun5i-a10s.dtsi"
47 #include "sunxi-common-regulators.dtsi"
49 #include <dt-bindings/gpio/gpio.h>
50 #include <dt-bindings/input/input.h>
53 model = "Olimex A10s-Olinuxino Micro";
54 compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
63 stdout-path = "serial0:115200n8";
67 compatible = "gpio-leds";
68 pinctrl-names = "default";
69 pinctrl-0 = <&led_pins_olinuxino>;
72 label = "a10s-olinuxino-micro:green:usr";
73 gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
84 pinctrl-names = "default";
85 pinctrl-0 = <&emac_pins_b>;
95 pinctrl-names = "default";
96 pinctrl-0 = <&i2c0_pins_a>;
105 #include "axp152.dtsi"
108 pinctrl-names = "default";
109 pinctrl-0 = <&i2c1_pins_a>;
113 compatible = "atmel,24c16";
121 pinctrl-names = "default";
122 pinctrl-0 = <&i2c2_pins_a>;
127 vref-supply = <®_vcc3v0>;
132 linux,code = <KEY_VOLUMEUP>;
138 label = "Volume Down";
139 linux,code = <KEY_VOLUMEDOWN>;
146 linux,code = <KEY_MENU>;
153 linux,code = <KEY_ENTER>;
160 linux,code = <KEY_HOMEPAGE>;
169 phy1: ethernet-phy@1 {
175 pinctrl-names = "default";
176 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
177 vmmc-supply = <®_vcc3v3>;
179 cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
185 pinctrl-names = "default";
186 pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
187 vmmc-supply = <®_vcc3v3>;
189 cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
203 mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
205 function = "gpio_in";
209 mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
211 function = "gpio_in";
215 led_pins_olinuxino: led_pins@0 {
217 function = "gpio_out";
218 drive-strength = <20>;
221 usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
223 function = "gpio_out";
226 usb0_id_detect_pin: usb0_id_detect_pin@0 {
228 function = "gpio_in";
234 gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
239 pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
240 gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
245 pinctrl-names = "default";
246 pinctrl-0 = <&spi2_pins_b>,
252 pinctrl-names = "default";
253 pinctrl-0 = <&uart0_pins_a>;
258 pinctrl-names = "default";
259 pinctrl-0 = <&uart2_pins_b>;
264 pinctrl-names = "default";
265 pinctrl-0 = <&uart3_pins_a>;
279 pinctrl-names = "default";
280 pinctrl-0 = <&usb0_id_detect_pin>;
281 usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
282 usb0_vbus-supply = <®_usb0_vbus>;
283 usb1_vbus-supply = <®_usb1_vbus>;