2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
44 #include "sun6i-a31.dtsi"
45 #include "sunxi-common-regulators.dtsi"
47 #include <dt-bindings/gpio/gpio.h>
48 #include <dt-bindings/pinctrl/sun4i-a10.h>
51 model = "Mele A1000G Quad top set box";
52 compatible = "mele,a1000g-quad", "allwinner,sun6i-a31";
59 stdout-path = "serial0:115200n8";
63 compatible = "gpio-leds";
64 pinctrl-names = "default";
65 pinctrl-0 = <&led_pins_m9>;
68 label = "a1000g:blue:pwr";
69 gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
76 cpu-supply = <®_dcdc3>;
88 pinctrl-names = "default";
89 pinctrl-0 = <&gmac_pins_mii_a>;
92 phy-supply = <®_dldo1>;
95 phy1: ethernet-phy@1 {
101 pinctrl-names = "default";
102 pinctrl-0 = <&ir_pins_a>;
107 pinctrl-names = "default";
108 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
109 vmmc-supply = <®_dcdc1>;
111 cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
120 compatible = "x-powers,axp221";
122 interrupt-parent = <&nmi_intc>;
123 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
127 #include "axp22x.dtsi"
130 led_pins_m9: led_pins@0 {
132 function = "gpio_out";
135 mmc0_cd_pin_m9: mmc0_cd_pin@0 {
137 function = "gpio_in";
141 usb1_vbus_pin_m9: usb1_vbus_pin@0 {
143 function = "gpio_out";
148 regulator-min-microvolt = <3300000>;
149 regulator-max-microvolt = <3300000>;
150 regulator-name = "vcc-wifi";
155 regulator-min-microvolt = <2700000>;
156 regulator-max-microvolt = <3300000>;
157 regulator-name = "avcc";
162 regulator-min-microvolt = <700000>;
163 regulator-max-microvolt = <1320000>;
164 regulator-name = "vdd-cpus"; /* This is an educated guess */
169 regulator-min-microvolt = <3300000>;
170 regulator-max-microvolt = <3300000>;
171 regulator-name = "vcc-3v3";
175 regulator-min-microvolt = <700000>;
176 regulator-max-microvolt = <1320000>;
177 regulator-name = "vdd-gpu";
182 regulator-min-microvolt = <700000>;
183 regulator-max-microvolt = <1320000>;
184 regulator-name = "vdd-cpu";
189 regulator-min-microvolt = <700000>;
190 regulator-max-microvolt = <1320000>;
191 regulator-name = "vdd-sys-dll";
196 regulator-min-microvolt = <1500000>;
197 regulator-max-microvolt = <1500000>;
198 regulator-name = "vcc-dram";
202 regulator-min-microvolt = <3300000>;
203 regulator-max-microvolt = <3300000>;
204 regulator-name = "vcc-ethernet-phy";
208 * Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached
209 * to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is
210 * marked as regulator-always-on.
214 regulator-min-microvolt = <3300000>;
215 regulator-max-microvolt = <3300000>;
216 regulator-name = "vcc-usb-hub";
220 pinctrl-names = "default";
221 pinctrl-0 = <&usb1_vbus_pin_m9>;
222 gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
227 pinctrl-names = "default";
228 pinctrl-0 = <&uart0_pins_a>;
238 usb1_vbus-supply = <®_usb1_vbus>;
239 usb2_vbus-supply = <®_aldo1>;