sys/gnu/dts/arm/sun7i-a20.dtsi

   1 /*
   2  * Copyright 2013 Maxime Ripard
   3  *
   4  * Maxime Ripard <maxime.ripard@free-electrons.com>
   5  *
   6  * This file is dual-licensed: you can use it either under the terms
   7  * of the GPL or the X11 license, at your option. Note that this dual
   8  * licensing only applies to this file, and not this project as a
   9  * whole.
  10  *
  11  *  a) This file is free software; you can redistribute it and/or
  12  *     modify it under the terms of the GNU General Public License as
  13  *     published by the Free Software Foundation; either version 2 of the
  14  *     License, or (at your option) any later version.
  15  *
  16  *     This file is distributed in the hope that it will be useful,
  17  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  *     GNU General Public License for more details.
  20  *
  21  * Or, alternatively,
  22  *
  23  *  b) Permission is hereby granted, free of charge, to any person
  24  *     obtaining a copy of this software and associated documentation
  25  *     files (the "Software"), to deal in the Software without
  26  *     restriction, including without limitation the rights to use,
  27  *     copy, modify, merge, publish, distribute, sublicense, and/or
  28  *     sell copies of the Software, and to permit persons to whom the
  29  *     Software is furnished to do so, subject to the following
  30  *     conditions:
  31  *
  32  *     The above copyright notice and this permission notice shall be
  33  *     included in all copies or substantial portions of the Software.
  34  *
  35  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  36  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  37  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  38  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  39  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  40  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  41  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  42  *     OTHER DEALINGS IN THE SOFTWARE.
  43  */
  44
  45 #include "skeleton.dtsi"
  46
  47 #include <dt-bindings/interrupt-controller/arm-gic.h>
  48 #include <dt-bindings/thermal/thermal.h>
  49 #include <dt-bindings/dma/sun4i-a10.h>
  50 #include <dt-bindings/clock/sun7i-a20-ccu.h>
  51 #include <dt-bindings/reset/sun4i-a10-ccu.h>
  52
  53 / {
  54         interrupt-parent = <&gic>;
  55
  56         aliases {
  57                 ethernet0 = &gmac;
  58         };
  59
  60         chosen {
  61                 #address-cells = <1>;
  62                 #size-cells = <1>;
  63                 ranges;
  64
  65                 framebuffer@0 {
  66                         compatible = "allwinner,simple-framebuffer",
  67                                      "simple-framebuffer";
  68                         allwinner,pipeline = "de_be0-lcd0-hdmi";
  69                         clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
  70                                  <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
  71                                  <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>,
  72                                  <&ccu CLK_HDMI>;
  73                         status = "disabled";
  74                 };
  75
  76                 framebuffer@1 {
  77                         compatible = "allwinner,simple-framebuffer",
  78                                      "simple-framebuffer";
  79                         allwinner,pipeline = "de_be0-lcd0";
  80                         clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
  81                                  <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH0>,
  82                                  <&ccu CLK_DRAM_DE_BE0>;
  83                         status = "disabled";
  84                 };
  85
  86                 framebuffer@2 {
  87                         compatible = "allwinner,simple-framebuffer",
  88                                      "simple-framebuffer";
  89                         allwinner,pipeline = "de_be0-lcd0-tve0";
  90                         clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
  91                                  <&ccu CLK_AHB_DE_BE0>,
  92                                  <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH1>,
  93                                  <&ccu CLK_DRAM_TVE0>, <&ccu CLK_DRAM_DE_BE0>;
  94                         status = "disabled";
  95                 };
  96         };
  97
  98         cpus {
  99                 #address-cells = <1>;
 100                 #size-cells = <0>;
 101
 102                 cpu0: cpu@0 {
 103                         compatible = "arm,cortex-a7";
 104                         device_type = "cpu";
 105                         reg = <0>;
 106                         clocks = <&ccu CLK_CPU>;
 107                         clock-latency = <244144>; /* 8 32k periods */
 108                         operating-points = <
 109                                 /* kHz    uV */
 110                                 960000  1400000
 111                                 912000  1400000
 112                                 864000  1300000
 113                                 720000  1200000
 114                                 528000  1100000
 115                                 312000  1000000
 116                                 144000  1000000
 117                                 >;
 118                         #cooling-cells = <2>;
 119                 };
 120
 121                 cpu@1 {
 122                         compatible = "arm,cortex-a7";
 123                         device_type = "cpu";
 124                         reg = <1>;
 125                         clocks = <&ccu CLK_CPU>;
 126                         clock-latency = <244144>; /* 8 32k periods */
 127                         operating-points = <
 128                                 /* kHz    uV */
 129                                 960000  1400000
 130                                 912000  1400000
 131                                 864000  1300000
 132                                 720000  1200000
 133                                 528000  1100000
 134                                 312000  1000000
 135                                 144000  1000000
 136                                 >;
 137                         #cooling-cells = <2>;
 138                 };
 139         };
 140
 141         thermal-zones {
 142                 cpu_thermal {
 143                         /* milliseconds */
 144                         polling-delay-passive = <250>;
 145                         polling-delay = <1000>;
 146                         thermal-sensors = <&rtp>;
 147
 148                         cooling-maps {
 149                                 map0 {
 150                                         trip = <&cpu_alert0>;
 151                                         cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 152                                 };
 153                         };
 154
 155                         trips {
 156                                 cpu_alert0: cpu_alert0 {
 157                                         /* milliCelsius */
 158                                         temperature = <75000>;
 159                                         hysteresis = <2000>;
 160                                         type = "passive";
 161                                 };
 162
 163                                 cpu_crit: cpu_crit {
 164                                         /* milliCelsius */
 165                                         temperature = <100000>;
 166                                         hysteresis = <2000>;
 167                                         type = "critical";
 168                                 };
 169                         };
 170                 };
 171         };
 172
 173         memory {
 174                 reg = <0x40000000 0x80000000>;
 175         };
 176
 177         timer {
 178                 compatible = "arm,armv7-timer";
 179                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 180                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 181                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 182                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 183         };
 184
 185         pmu {
 186                 compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
 187                 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
 188                              <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 189         };
 190
 191         clocks {
 192                 #address-cells = <1>;
 193                 #size-cells = <1>;
 194                 ranges;
 195
 196                 osc24M: clk@1c20050 {
 197                         #clock-cells = <0>;
 198                         compatible = "fixed-clock";
 199                         clock-frequency = <24000000>;
 200                         clock-output-names = "osc24M";
 201                 };
 202
 203                 osc32k: clk@0 {
 204                         #clock-cells = <0>;
 205                         compatible = "fixed-clock";
 206                         clock-frequency = <32768>;
 207                         clock-output-names = "osc32k";
 208                 };
 209
 210                 /*
 211                  * The following two are dummy clocks, placeholders
 212                  * used in the gmac_tx clock. The gmac driver will
 213                  * choose one parent depending on the PHY interface
 214                  * mode, using clk_set_rate auto-reparenting.
 215                  *
 216                  * The actual TX clock rate is not controlled by the
 217                  * gmac_tx clock.
 218                  */
 219                 mii_phy_tx_clk: clk@1 {
 220                         #clock-cells = <0>;
 221                         compatible = "fixed-clock";
 222                         clock-frequency = <25000000>;
 223                         clock-output-names = "mii_phy_tx";
 224                 };
 225
 226                 gmac_int_tx_clk: clk@2 {
 227                         #clock-cells = <0>;
 228                         compatible = "fixed-clock";
 229                         clock-frequency = <125000000>;
 230                         clock-output-names = "gmac_int_tx";
 231                 };
 232
 233                 gmac_tx_clk: clk@1c20164 {
 234                         #clock-cells = <0>;
 235                         compatible = "allwinner,sun7i-a20-gmac-clk";
 236                         reg = <0x01c20164 0x4>;
 237                         clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
 238                         clock-output-names = "gmac_tx";
 239                 };
 240         };
 241
 242
 243         de: display-engine {
 244                 compatible = "allwinner,sun7i-a20-display-engine";
 245                 allwinner,pipelines = <&fe0>, <&fe1>;
 246                 status = "disabled";
 247         };
 248
 249         soc@1c00000 {
 250                 compatible = "simple-bus";
 251                 #address-cells = <1>;
 252                 #size-cells = <1>;
 253                 ranges;
 254
 255                 system-control@1c00000 {
 256                         compatible = "allwinner,sun7i-a20-system-control",
 257                                      "allwinner,sun4i-a10-system-control";
 258                         reg = <0x01c00000 0x30>;
 259                         #address-cells = <1>;
 260                         #size-cells = <1>;
 261                         ranges;
 262
 263                         sram_a: sram@0 {
 264                                 compatible = "mmio-sram";
 265                                 reg = <0x00000000 0xc000>;
 266                                 #address-cells = <1>;
 267                                 #size-cells = <1>;
 268                                 ranges = <0 0x00000000 0xc000>;
 269
 270                                 emac_sram: sram-section@8000 {
 271                                         compatible = "allwinner,sun7i-a20-sram-a3-a4",
 272                                                      "allwinner,sun4i-a10-sram-a3-a4";
 273                                         reg = <0x8000 0x4000>;
 274                                         status = "disabled";
 275                                 };
 276                         };
 277
 278                         sram_d: sram@10000 {
 279                                 compatible = "mmio-sram";
 280                                 reg = <0x00010000 0x1000>;
 281                                 #address-cells = <1>;
 282                                 #size-cells = <1>;
 283                                 ranges = <0 0x00010000 0x1000>;
 284
 285                                 otg_sram: sram-section@0 {
 286                                         compatible = "allwinner,sun7i-a20-sram-d",
 287                                                      "allwinner,sun4i-a10-sram-d";
 288                                         reg = <0x0000 0x1000>;
 289                                         status = "disabled";
 290                                 };
 291                         };
 292
 293                         sram_c: sram@1d00000 {
 294                                 compatible = "mmio-sram";
 295                                 reg = <0x01d00000 0xd0000>;
 296                                 #address-cells = <1>;
 297                                 #size-cells = <1>;
 298                                 ranges = <0 0x01d00000 0xd0000>;
 299
 300                                 ve_sram: sram-section@0 {
 301                                         compatible = "allwinner,sun7i-a20-sram-c1",
 302                                                      "allwinner,sun4i-a10-sram-c1";
 303                                         reg = <0x000000 0x80000>;
 304                                 };
 305                         };
 306                 };
 307
 308                 nmi_intc: interrupt-controller@1c00030 {
 309                         compatible = "allwinner,sun7i-a20-sc-nmi";
 310                         interrupt-controller;
 311                         #interrupt-cells = <2>;
 312                         reg = <0x01c00030 0x0c>;
 313                         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 314                 };
 315
 316                 dma: dma-controller@1c02000 {
 317                         compatible = "allwinner,sun4i-a10-dma";
 318                         reg = <0x01c02000 0x1000>;
 319                         interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 320                         clocks = <&ccu CLK_AHB_DMA>;
 321                         #dma-cells = <2>;
 322                 };
 323
 324                 nfc: nand@1c03000 {
 325                         compatible = "allwinner,sun4i-a10-nand";
 326                         reg = <0x01c03000 0x1000>;
 327                         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 328                         clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
 329                         clock-names = "ahb", "mod";
 330                         dmas = <&dma SUN4I_DMA_DEDICATED 3>;
 331                         dma-names = "rxtx";
 332                         status = "disabled";
 333                         #address-cells = <1>;
 334                         #size-cells = <0>;
 335                 };
 336
 337                 spi0: spi@1c05000 {
 338                         compatible = "allwinner,sun4i-a10-spi";
 339                         reg = <0x01c05000 0x1000>;
 340                         interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 341                         clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
 342                         clock-names = "ahb", "mod";
 343                         dmas = <&dma SUN4I_DMA_DEDICATED 27>,
 344                                <&dma SUN4I_DMA_DEDICATED 26>;
 345                         dma-names = "rx", "tx";
 346                         status = "disabled";
 347                         #address-cells = <1>;
 348                         #size-cells = <0>;
 349                         num-cs = <4>;
 350                 };
 351
 352                 spi1: spi@1c06000 {
 353                         compatible = "allwinner,sun4i-a10-spi";
 354                         reg = <0x01c06000 0x1000>;
 355                         interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 356                         clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
 357                         clock-names = "ahb", "mod";
 358                         dmas = <&dma SUN4I_DMA_DEDICATED 9>,
 359                                <&dma SUN4I_DMA_DEDICATED 8>;
 360                         dma-names = "rx", "tx";
 361                         status = "disabled";
 362                         #address-cells = <1>;
 363                         #size-cells = <0>;
 364                         num-cs = <1>;
 365                 };
 366
 367                 emac: ethernet@1c0b000 {
 368                         compatible = "allwinner,sun4i-a10-emac";
 369                         reg = <0x01c0b000 0x1000>;
 370                         interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 371                         clocks = <&ccu CLK_AHB_EMAC>;
 372                         allwinner,sram = <&emac_sram 1>;
 373                         status = "disabled";
 374                 };
 375
 376                 mdio: mdio@1c0b080 {
 377                         compatible = "allwinner,sun4i-a10-mdio";
 378                         reg = <0x01c0b080 0x14>;
 379                         status = "disabled";
 380                         #address-cells = <1>;
 381                         #size-cells = <0>;
 382                 };
 383
 384                 tcon0: lcd-controller@1c0c000 {
 385                         compatible = "allwinner,sun7i-a20-tcon";
 386                         reg = <0x01c0c000 0x1000>;
 387                         interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 388                         resets = <&ccu RST_TCON0>;
 389                         reset-names = "lcd";
 390                         clocks = <&ccu CLK_AHB_LCD0>,
 391                                  <&ccu CLK_TCON0_CH0>,
 392                                  <&ccu CLK_TCON0_CH1>;
 393                         clock-names = "ahb",
 394                                       "tcon-ch0",
 395                                       "tcon-ch1";
 396                         clock-output-names = "tcon0-pixel-clock";
 397                         dmas = <&dma SUN4I_DMA_DEDICATED 14>;
 398
 399                         ports {
 400                                 #address-cells = <1>;
 401                                 #size-cells = <0>;
 402
 403                                 tcon0_in: port@0 {
 404                                         #address-cells = <1>;
 405                                         #size-cells = <0>;
 406                                         reg = <0>;
 407
 408                                         tcon0_in_be0: endpoint@0 {
 409                                                 reg = <0>;
 410                                                 remote-endpoint = <&be0_out_tcon0>;
 411                                         };
 412
 413                                         tcon0_in_be1: endpoint@1 {
 414                                                 reg = <1>;
 415                                                 remote-endpoint = <&be1_out_tcon0>;
 416                                         };
 417                                 };
 418
 419                                 tcon0_out: port@1 {
 420                                         #address-cells = <1>;
 421                                         #size-cells = <0>;
 422                                         reg = <1>;
 423
 424                                         tcon0_out_hdmi: endpoint@1 {
 425                                                 reg = <1>;
 426                                                 remote-endpoint = <&hdmi_in_tcon0>;
 427                                                 allwinner,tcon-channel = <1>;
 428                                         };
 429                                 };
 430                         };
 431                 };
 432
 433                 tcon1: lcd-controller@1c0d000 {
 434                         compatible = "allwinner,sun7i-a20-tcon";
 435                         reg = <0x01c0d000 0x1000>;
 436                         interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 437                         resets = <&ccu RST_TCON1>;
 438                         reset-names = "lcd";
 439                         clocks = <&ccu CLK_AHB_LCD1>,
 440                                  <&ccu CLK_TCON1_CH0>,
 441                                  <&ccu CLK_TCON1_CH1>;
 442                         clock-names = "ahb",
 443                                       "tcon-ch0",
 444                                       "tcon-ch1";
 445                         clock-output-names = "tcon1-pixel-clock";
 446                         dmas = <&dma SUN4I_DMA_DEDICATED 15>;
 447
 448                         ports {
 449                                 #address-cells = <1>;
 450                                 #size-cells = <0>;
 451
 452                                 tcon1_in: port@0 {
 453                                         #address-cells = <1>;
 454                                         #size-cells = <0>;
 455                                         reg = <0>;
 456
 457                                         tcon1_in_be0: endpoint@0 {
 458                                                 reg = <0>;
 459                                                 remote-endpoint = <&be0_out_tcon1>;
 460                                         };
 461
 462                                         tcon1_in_be1: endpoint@1 {
 463                                                 reg = <1>;
 464                                                 remote-endpoint = <&be1_out_tcon1>;
 465                                         };
 466                                 };
 467
 468                                 tcon1_out: port@1 {
 469                                         #address-cells = <1>;
 470                                         #size-cells = <0>;
 471                                         reg = <1>;
 472
 473                                         tcon1_out_hdmi: endpoint@1 {
 474                                                 reg = <1>;
 475                                                 remote-endpoint = <&hdmi_in_tcon1>;
 476                                                 allwinner,tcon-channel = <1>;
 477                                         };
 478                                 };
 479                         };
 480                 };
 481
 482                 mmc0: mmc@1c0f000 {
 483                         compatible = "allwinner,sun7i-a20-mmc";
 484                         reg = <0x01c0f000 0x1000>;
 485                         clocks = <&ccu CLK_AHB_MMC0>,
 486                                  <&ccu CLK_MMC0>,
 487                                  <&ccu CLK_MMC0_OUTPUT>,
 488                                  <&ccu CLK_MMC0_SAMPLE>;
 489                         clock-names = "ahb",
 490                                       "mmc",
 491                                       "output",
 492                                       "sample";
 493                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 494                         status = "disabled";
 495                         #address-cells = <1>;
 496                         #size-cells = <0>;
 497                 };
 498
 499                 mmc1: mmc@1c10000 {
 500                         compatible = "allwinner,sun7i-a20-mmc";
 501                         reg = <0x01c10000 0x1000>;
 502                         clocks = <&ccu CLK_AHB_MMC1>,
 503                                  <&ccu CLK_MMC1>,
 504                                  <&ccu CLK_MMC1_OUTPUT>,
 505                                  <&ccu CLK_MMC1_SAMPLE>;
 506                         clock-names = "ahb",
 507                                       "mmc",
 508                                       "output",
 509                                       "sample";
 510                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 511                         status = "disabled";
 512                         #address-cells = <1>;
 513                         #size-cells = <0>;
 514                 };
 515
 516                 mmc2: mmc@1c11000 {
 517                         compatible = "allwinner,sun7i-a20-mmc";
 518                         reg = <0x01c11000 0x1000>;
 519                         clocks = <&ccu CLK_AHB_MMC2>,
 520                                  <&ccu CLK_MMC2>,
 521                                  <&ccu CLK_MMC2_OUTPUT>,
 522                                  <&ccu CLK_MMC2_SAMPLE>;
 523                         clock-names = "ahb",
 524                                       "mmc",
 525                                       "output",
 526                                       "sample";
 527                         interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 528                         status = "disabled";
 529                         #address-cells = <1>;
 530                         #size-cells = <0>;
 531                 };
 532
 533                 mmc3: mmc@1c12000 {
 534                         compatible = "allwinner,sun7i-a20-mmc";
 535                         reg = <0x01c12000 0x1000>;
 536                         clocks = <&ccu CLK_AHB_MMC3>,
 537                                  <&ccu CLK_MMC3>,
 538                                  <&ccu CLK_MMC3_OUTPUT>,
 539                                  <&ccu CLK_MMC3_SAMPLE>;
 540                         clock-names = "ahb",
 541                                       "mmc",
 542                                       "output",
 543                                       "sample";
 544                         interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 545                         status = "disabled";
 546                         #address-cells = <1>;
 547                         #size-cells = <0>;
 548                 };
 549
 550                 usb_otg: usb@1c13000 {
 551                         compatible = "allwinner,sun4i-a10-musb";
 552                         reg = <0x01c13000 0x0400>;
 553                         clocks = <&ccu CLK_AHB_OTG>;
 554                         interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 555                         interrupt-names = "mc";
 556                         phys = <&usbphy 0>;
 557                         phy-names = "usb";
 558                         extcon = <&usbphy 0>;
 559                         allwinner,sram = <&otg_sram 1>;
 560                         status = "disabled";
 561                 };
 562
 563                 usbphy: phy@1c13400 {
 564                         #phy-cells = <1>;
 565                         compatible = "allwinner,sun7i-a20-usb-phy";
 566                         reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
 567                         reg-names = "phy_ctrl", "pmu1", "pmu2";
 568                         clocks = <&ccu CLK_USB_PHY>;
 569                         clock-names = "usb_phy";
 570                         resets = <&ccu RST_USB_PHY0>,
 571                                  <&ccu RST_USB_PHY1>,
 572                                  <&ccu RST_USB_PHY2>;
 573                         reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
 574                         status = "disabled";
 575                 };
 576
 577                 ehci0: usb@1c14000 {
 578                         compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
 579                         reg = <0x01c14000 0x100>;
 580                         interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 581                         clocks = <&ccu CLK_AHB_EHCI0>;
 582                         phys = <&usbphy 1>;
 583                         phy-names = "usb";
 584                         status = "disabled";
 585                 };
 586
 587                 ohci0: usb@1c14400 {
 588                         compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
 589                         reg = <0x01c14400 0x100>;
 590                         interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 591                         clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
 592                         phys = <&usbphy 1>;
 593                         phy-names = "usb";
 594                         status = "disabled";
 595                 };
 596
 597                 crypto: crypto-engine@1c15000 {
 598                         compatible = "allwinner,sun7i-a20-crypto",
 599                                      "allwinner,sun4i-a10-crypto";
 600                         reg = <0x01c15000 0x1000>;
 601                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 602                         clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
 603                         clock-names = "ahb", "mod";
 604                 };
 605
 606                 hdmi: hdmi@1c16000 {
 607                         compatible = "allwinner,sun7i-a20-hdmi",
 608                                      "allwinner,sun5i-a10s-hdmi";
 609                         reg = <0x01c16000 0x1000>;
 610                         interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 611                         clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
 612                                  <&ccu CLK_PLL_VIDEO0_2X>,
 613                                  <&ccu CLK_PLL_VIDEO1_2X>;
 614                         clock-names = "ahb", "mod", "pll-0", "pll-1";
 615                         dmas = <&dma SUN4I_DMA_NORMAL 16>,
 616                                <&dma SUN4I_DMA_NORMAL 16>,
 617                                <&dma SUN4I_DMA_DEDICATED 24>;
 618                         dma-names = "ddc-tx", "ddc-rx", "audio-tx";
 619                         status = "disabled";
 620
 621                         ports {
 622                                 #address-cells = <1>;
 623                                 #size-cells = <0>;
 624
 625                                 hdmi_in: port@0 {
 626                                         #address-cells = <1>;
 627                                         #size-cells = <0>;
 628                                         reg = <0>;
 629
 630                                         hdmi_in_tcon0: endpoint@0 {
 631                                                 reg = <0>;
 632                                                 remote-endpoint = <&tcon0_out_hdmi>;
 633                                         };
 634
 635                                         hdmi_in_tcon1: endpoint@1 {
 636                                                 reg = <1>;
 637                                                 remote-endpoint = <&tcon1_out_hdmi>;
 638                                         };
 639                                 };
 640
 641                                 hdmi_out: port@1 {
 642                                         #address-cells = <1>;
 643                                         #size-cells = <0>;
 644                                         reg = <1>;
 645                                 };
 646                         };
 647                 };
 648
 649                 spi2: spi@1c17000 {
 650                         compatible = "allwinner,sun4i-a10-spi";
 651                         reg = <0x01c17000 0x1000>;
 652                         interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 653                         clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
 654                         clock-names = "ahb", "mod";
 655                         dmas = <&dma SUN4I_DMA_DEDICATED 29>,
 656                                <&dma SUN4I_DMA_DEDICATED 28>;
 657                         dma-names = "rx", "tx";
 658                         status = "disabled";
 659                         #address-cells = <1>;
 660                         #size-cells = <0>;
 661                         num-cs = <1>;
 662                 };
 663
 664                 ahci: sata@1c18000 {
 665                         compatible = "allwinner,sun4i-a10-ahci";
 666                         reg = <0x01c18000 0x1000>;
 667                         interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 668                         clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>;
 669                         status = "disabled";
 670                 };
 671
 672                 ehci1: usb@1c1c000 {
 673                         compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
 674                         reg = <0x01c1c000 0x100>;
 675                         interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 676                         clocks = <&ccu CLK_AHB_EHCI1>;
 677                         phys = <&usbphy 2>;
 678                         phy-names = "usb";
 679                         status = "disabled";
 680                 };
 681
 682                 ohci1: usb@1c1c400 {
 683                         compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
 684                         reg = <0x01c1c400 0x100>;
 685                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 686                         clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
 687                         phys = <&usbphy 2>;
 688                         phy-names = "usb";
 689                         status = "disabled";
 690                 };
 691
 692                 spi3: spi@1c1f000 {
 693                         compatible = "allwinner,sun4i-a10-spi";
 694                         reg = <0x01c1f000 0x1000>;
 695                         interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 696                         clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>;
 697                         clock-names = "ahb", "mod";
 698                         dmas = <&dma SUN4I_DMA_DEDICATED 31>,
 699                                <&dma SUN4I_DMA_DEDICATED 30>;
 700                         dma-names = "rx", "tx";
 701                         status = "disabled";
 702                         #address-cells = <1>;
 703                         #size-cells = <0>;
 704                         num-cs = <1>;
 705                 };
 706
 707                 ccu: clock@1c20000 {
 708                         compatible = "allwinner,sun7i-a20-ccu";
 709                         reg = <0x01c20000 0x400>;
 710                         clocks = <&osc24M>, <&osc32k>;
 711                         clock-names = "hosc", "losc";
 712                         #clock-cells = <1>;
 713                         #reset-cells = <1>;
 714                 };
 715
 716                 pio: pinctrl@1c20800 {
 717                         compatible = "allwinner,sun7i-a20-pinctrl";
 718                         reg = <0x01c20800 0x400>;
 719                         interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 720                         clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
 721                         clock-names = "apb", "hosc", "losc";
 722                         gpio-controller;
 723                         interrupt-controller;
 724                         #interrupt-cells = <3>;
 725                         #gpio-cells = <3>;
 726
 727                         can0_pins_a: can0@0 {
 728                                 pins = "PH20", "PH21";
 729                                 function = "can";
 730                         };
 731
 732                         clk_out_a_pins_a: clk_out_a@0 {
 733                                 pins = "PI12";
 734                                 function = "clk_out_a";
 735                         };
 736
 737                         clk_out_b_pins_a: clk_out_b@0 {
 738                                 pins = "PI13";
 739                                 function = "clk_out_b";
 740                         };
 741
 742                         emac_pins_a: emac0@0 {
 743                                 pins = "PA0", "PA1", "PA2",
 744                                        "PA3", "PA4", "PA5", "PA6",
 745                                        "PA7", "PA8", "PA9", "PA10",
 746                                        "PA11", "PA12", "PA13", "PA14",
 747                                        "PA15", "PA16";
 748                                 function = "emac";
 749                         };
 750
 751                         gmac_pins_mii_a: gmac_mii@0 {
 752                                 pins = "PA0", "PA1", "PA2",
 753                                        "PA3", "PA4", "PA5", "PA6",
 754                                        "PA7", "PA8", "PA9", "PA10",
 755                                        "PA11", "PA12", "PA13", "PA14",
 756                                        "PA15", "PA16";
 757                                 function = "gmac";
 758                         };
 759
 760                         gmac_pins_rgmii_a: gmac_rgmii@0 {
 761                                 pins = "PA0", "PA1", "PA2",
 762                                        "PA3", "PA4", "PA5", "PA6",
 763                                         "PA7", "PA8", "PA10",
 764                                        "PA11", "PA12", "PA13",
 765                                        "PA15", "PA16";
 766                                 function = "gmac";
 767                                 /*
 768                                  * data lines in RGMII mode use DDR mode
 769                                  * and need a higher signal drive strength
 770                                  */
 771                                 drive-strength = <40>;
 772                         };
 773
 774                         i2c0_pins_a: i2c0@0 {
 775                                 pins = "PB0", "PB1";
 776                                 function = "i2c0";
 777                         };
 778
 779                         i2c1_pins_a: i2c1@0 {
 780                                 pins = "PB18", "PB19";
 781                                 function = "i2c1";
 782                         };
 783
 784                         i2c2_pins_a: i2c2@0 {
 785                                 pins = "PB20", "PB21";
 786                                 function = "i2c2";
 787                         };
 788
 789                         i2c3_pins_a: i2c3@0 {
 790                                 pins = "PI0", "PI1";
 791                                 function = "i2c3";
 792                         };
 793
 794                         ir0_rx_pins_a: ir0@0 {
 795                                 pins = "PB4";
 796                                 function = "ir0";
 797                         };
 798
 799                         ir0_tx_pins_a: ir0@1 {
 800                                 pins = "PB3";
 801                                 function = "ir0";
 802                         };
 803
 804                         ir1_rx_pins_a: ir1@0 {
 805                                 pins = "PB23";
 806                                 function = "ir1";
 807                         };
 808
 809                         ir1_tx_pins_a: ir1@1 {
 810                                 pins = "PB22";
 811                                 function = "ir1";
 812                         };
 813
 814                         mmc0_pins_a: mmc0@0 {
 815                                 pins = "PF0", "PF1", "PF2",
 816                                        "PF3", "PF4", "PF5";
 817                                 function = "mmc0";
 818                                 drive-strength = <30>;
 819                                 bias-pull-up;
 820                         };
 821
 822                         mmc2_pins_a: mmc2@0 {
 823                                 pins = "PC6", "PC7", "PC8",
 824                                        "PC9", "PC10", "PC11";
 825                                 function = "mmc2";
 826                                 drive-strength = <30>;
 827                                 bias-pull-up;
 828                         };
 829
 830                         mmc3_pins_a: mmc3@0 {
 831                                 pins = "PI4", "PI5", "PI6",
 832                                        "PI7", "PI8", "PI9";
 833                                 function = "mmc3";
 834                                 drive-strength = <30>;
 835                                 bias-pull-up;
 836                         };
 837
 838                         ps20_pins_a: ps20@0 {
 839                                 pins = "PI20", "PI21";
 840                                 function = "ps2";
 841                         };
 842
 843                         ps21_pins_a: ps21@0 {
 844                                 pins = "PH12", "PH13";
 845                                 function = "ps2";
 846                         };
 847
 848                         pwm0_pins_a: pwm0@0 {
 849                                 pins = "PB2";
 850                                 function = "pwm";
 851                         };
 852
 853                         pwm1_pins_a: pwm1@0 {
 854                                 pins = "PI3";
 855                                 function = "pwm";
 856                         };
 857
 858                         spdif_tx_pins_a: spdif@0 {
 859                                 pins = "PB13";
 860                                 function = "spdif";
 861                                 bias-pull-up;
 862                         };
 863
 864                         spi0_pins_a: spi0@0 {
 865                                 pins = "PI11", "PI12", "PI13";
 866                                 function = "spi0";
 867                         };
 868
 869                         spi0_cs0_pins_a: spi0_cs0@0 {
 870                                 pins = "PI10";
 871                                 function = "spi0";
 872                         };
 873
 874                         spi0_cs1_pins_a: spi0_cs1@0 {
 875                                 pins = "PI14";
 876                                 function = "spi0";
 877                         };
 878
 879                         spi1_pins_a: spi1@0 {
 880                                 pins = "PI17", "PI18", "PI19";
 881                                 function = "spi1";
 882                         };
 883
 884                         spi1_cs0_pins_a: spi1_cs0@0 {
 885                                 pins = "PI16";
 886                                 function = "spi1";
 887                         };
 888
 889                         spi2_pins_a: spi2@0 {
 890                                 pins = "PC20", "PC21", "PC22";
 891                                 function = "spi2";
 892                         };
 893
 894                         spi2_pins_b: spi2@1 {
 895                                 pins = "PB15", "PB16", "PB17";
 896                                 function = "spi2";
 897                         };
 898
 899                         spi2_cs0_pins_a: spi2_cs0@0 {
 900                                 pins = "PC19";
 901                                 function = "spi2";
 902                         };
 903
 904                         spi2_cs0_pins_b: spi2_cs0@1 {
 905                                 pins = "PB14";
 906                                 function = "spi2";
 907                         };
 908
 909                         uart0_pins_a: uart0@0 {
 910                                 pins = "PB22", "PB23";
 911                                 function = "uart0";
 912                         };
 913
 914                         uart2_pins_a: uart2@0 {
 915                                 pins = "PI16", "PI17", "PI18", "PI19";
 916                                 function = "uart2";
 917                         };
 918
 919                         uart3_pins_a: uart3@0 {
 920                                 pins = "PG6", "PG7", "PG8", "PG9";
 921                                 function = "uart3";
 922                         };
 923
 924                         uart3_pins_b: uart3@1 {
 925                                 pins = "PH0", "PH1";
 926                                 function = "uart3";
 927                         };
 928
 929                         uart4_pins_a: uart4@0 {
 930                                 pins = "PG10", "PG11";
 931                                 function = "uart4";
 932                         };
 933
 934                         uart4_pins_b: uart4@1 {
 935                                 pins = "PH4", "PH5";
 936                                 function = "uart4";
 937                         };
 938
 939                         uart5_pins_a: uart5@0 {
 940                                 pins = "PI10", "PI11";
 941                                 function = "uart5";
 942                         };
 943
 944                         uart6_pins_a: uart6@0 {
 945                                 pins = "PI12", "PI13";
 946                                 function = "uart6";
 947                         };
 948
 949                         uart7_pins_a: uart7@0 {
 950                                 pins = "PI20", "PI21";
 951                                 function = "uart7";
 952                         };
 953                 };
 954
 955                 timer@1c20c00 {
 956                         compatible = "allwinner,sun4i-a10-timer";
 957                         reg = <0x01c20c00 0x90>;
 958                         interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
 959                                      <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
 960                                      <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
 961                                      <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
 962                                      <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
 963                                      <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 964                         clocks = <&osc24M>;
 965                 };
 966
 967                 wdt: watchdog@1c20c90 {
 968                         compatible = "allwinner,sun4i-a10-wdt";
 969                         reg = <0x01c20c90 0x10>;
 970                 };
 971
 972                 rtc: rtc@1c20d00 {
 973                         compatible = "allwinner,sun7i-a20-rtc";
 974                         reg = <0x01c20d00 0x20>;
 975                         interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 976                 };
 977
 978                 pwm: pwm@1c20e00 {
 979                         compatible = "allwinner,sun7i-a20-pwm";
 980                         reg = <0x01c20e00 0xc>;
 981                         clocks = <&osc24M>;
 982                         #pwm-cells = <3>;
 983                         status = "disabled";
 984                 };
 985
 986                 spdif: spdif@1c21000 {
 987                         #sound-dai-cells = <0>;
 988                         compatible = "allwinner,sun4i-a10-spdif";
 989                         reg = <0x01c21000 0x400>;
 990                         interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 991                         clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
 992                         clock-names = "apb", "spdif";
 993                         dmas = <&dma SUN4I_DMA_NORMAL 2>,
 994                                <&dma SUN4I_DMA_NORMAL 2>;
 995                         dma-names = "rx", "tx";
 996                         status = "disabled";
 997                 };
 998
 999                 ir0: ir@1c21800 {
1000                         compatible = "allwinner,sun4i-a10-ir";
1001                         clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>;
1002                         clock-names = "apb", "ir";
1003                         interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
1004                         reg = <0x01c21800 0x40>;
1005                         status = "disabled";
1006                 };
1007
1008                 ir1: ir@1c21c00 {
1009                         compatible = "allwinner,sun4i-a10-ir";
1010                         clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>;
1011                         clock-names = "apb", "ir";
1012                         interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
1013                         reg = <0x01c21c00 0x40>;
1014                         status = "disabled";
1015                 };
1016
1017                 i2s1: i2s@1c22000 {
1018                         #sound-dai-cells = <0>;
1019                         compatible = "allwinner,sun4i-a10-i2s";
1020                         reg = <0x01c22000 0x400>;
1021                         interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
1022                         clocks = <&ccu CLK_APB0_I2S1>, <&ccu CLK_I2S1>;
1023                         clock-names = "apb", "mod";
1024                         dmas = <&dma SUN4I_DMA_NORMAL 4>,
1025                                <&dma SUN4I_DMA_NORMAL 4>;
1026                         dma-names = "rx", "tx";
1027                         status = "disabled";
1028                 };
1029
1030                 i2s0: i2s@1c22400 {
1031                         #sound-dai-cells = <0>;
1032                         compatible = "allwinner,sun4i-a10-i2s";
1033                         reg = <0x01c22400 0x400>;
1034                         interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
1035                         clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>;
1036                         clock-names = "apb", "mod";
1037                         dmas = <&dma SUN4I_DMA_NORMAL 3>,
1038                                <&dma SUN4I_DMA_NORMAL 3>;
1039                         dma-names = "rx", "tx";
1040                         status = "disabled";
1041                 };
1042
1043                 lradc: lradc@1c22800 {
1044                         compatible = "allwinner,sun4i-a10-lradc-keys";
1045                         reg = <0x01c22800 0x100>;
1046                         interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
1047                         status = "disabled";
1048                 };
1049
1050                 codec: codec@1c22c00 {
1051                         #sound-dai-cells = <0>;
1052                         compatible = "allwinner,sun7i-a20-codec";
1053                         reg = <0x01c22c00 0x40>;
1054                         interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
1055                         clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
1056                         clock-names = "apb", "codec";
1057                         dmas = <&dma SUN4I_DMA_NORMAL 19>,
1058                                <&dma SUN4I_DMA_NORMAL 19>;
1059                         dma-names = "rx", "tx";
1060                         status = "disabled";
1061                 };
1062
1063                 sid: eeprom@1c23800 {
1064                         compatible = "allwinner,sun7i-a20-sid";
1065                         reg = <0x01c23800 0x200>;
1066                 };
1067
1068                 i2s2: i2s@1c24400 {
1069                         #sound-dai-cells = <0>;
1070                         compatible = "allwinner,sun4i-a10-i2s";
1071                         reg = <0x01c24400 0x400>;
1072                         interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
1073                         clocks = <&ccu CLK_APB0_I2S2>, <&ccu CLK_I2S2>;
1074                         clock-names = "apb", "mod";
1075                         dmas = <&dma SUN4I_DMA_NORMAL 6>,
1076                                <&dma SUN4I_DMA_NORMAL 6>;
1077                         dma-names = "rx", "tx";
1078                         status = "disabled";
1079                 };
1080
1081                 rtp: rtp@1c25000 {
1082                         compatible = "allwinner,sun5i-a13-ts";
1083                         reg = <0x01c25000 0x100>;
1084                         interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
1085                         #thermal-sensor-cells = <0>;
1086                 };
1087
1088                 uart0: serial@1c28000 {
1089                         compatible = "snps,dw-apb-uart";
1090                         reg = <0x01c28000 0x400>;
1091                         interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
1092                         reg-shift = <2>;
1093                         reg-io-width = <4>;
1094                         clocks = <&ccu CLK_APB1_UART0>;
1095                         status = "disabled";
1096                 };
1097
1098                 uart1: serial@1c28400 {
1099                         compatible = "snps,dw-apb-uart";
1100                         reg = <0x01c28400 0x400>;
1101                         interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
1102                         reg-shift = <2>;
1103                         reg-io-width = <4>;
1104                         clocks = <&ccu CLK_APB1_UART1>;
1105                         status = "disabled";
1106                 };
1107
1108                 uart2: serial@1c28800 {
1109                         compatible = "snps,dw-apb-uart";
1110                         reg = <0x01c28800 0x400>;
1111                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
1112                         reg-shift = <2>;
1113                         reg-io-width = <4>;
1114                         clocks = <&ccu CLK_APB1_UART2>;
1115                         status = "disabled";
1116                 };
1117
1118                 uart3: serial@1c28c00 {
1119                         compatible = "snps,dw-apb-uart";
1120                         reg = <0x01c28c00 0x400>;
1121                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
1122                         reg-shift = <2>;
1123                         reg-io-width = <4>;
1124                         clocks = <&ccu CLK_APB1_UART3>;
1125                         status = "disabled";
1126                 };
1127
1128                 uart4: serial@1c29000 {
1129                         compatible = "snps,dw-apb-uart";
1130                         reg = <0x01c29000 0x400>;
1131                         interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
1132                         reg-shift = <2>;
1133                         reg-io-width = <4>;
1134                         clocks = <&ccu CLK_APB1_UART4>;
1135                         status = "disabled";
1136                 };
1137
1138                 uart5: serial@1c29400 {
1139                         compatible = "snps,dw-apb-uart";
1140                         reg = <0x01c29400 0x400>;
1141                         interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
1142                         reg-shift = <2>;
1143                         reg-io-width = <4>;
1144                         clocks = <&ccu CLK_APB1_UART5>;
1145                         status = "disabled";
1146                 };
1147
1148                 uart6: serial@1c29800 {
1149                         compatible = "snps,dw-apb-uart";
1150                         reg = <0x01c29800 0x400>;
1151                         interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
1152                         reg-shift = <2>;
1153                         reg-io-width = <4>;
1154                         clocks = <&ccu CLK_APB1_UART6>;
1155                         status = "disabled";
1156                 };
1157
1158                 uart7: serial@1c29c00 {
1159                         compatible = "snps,dw-apb-uart";
1160                         reg = <0x01c29c00 0x400>;
1161                         interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
1162                         reg-shift = <2>;
1163                         reg-io-width = <4>;
1164                         clocks = <&ccu CLK_APB1_UART7>;
1165                         status = "disabled";
1166                 };
1167
1168                 ps20: ps2@1c2a000 {
1169                         compatible = "allwinner,sun4i-a10-ps2";
1170                         reg = <0x01c2a000 0x400>;
1171                         interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
1172                         clocks = <&ccu CLK_APB1_PS20>;
1173                         status = "disabled";
1174                 };
1175
1176                 ps21: ps2@1c2a400 {
1177                         compatible = "allwinner,sun4i-a10-ps2";
1178                         reg = <0x01c2a400 0x400>;
1179                         interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
1180                         clocks = <&ccu CLK_APB1_PS21>;
1181                         status = "disabled";
1182                 };
1183
1184                 i2c0: i2c@1c2ac00 {
1185                         compatible = "allwinner,sun7i-a20-i2c",
1186                                      "allwinner,sun4i-a10-i2c";
1187                         reg = <0x01c2ac00 0x400>;
1188                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
1189                         clocks = <&ccu CLK_APB1_I2C0>;
1190                         status = "disabled";
1191                         #address-cells = <1>;
1192                         #size-cells = <0>;
1193                 };
1194
1195                 i2c1: i2c@1c2b000 {
1196                         compatible = "allwinner,sun7i-a20-i2c",
1197                                      "allwinner,sun4i-a10-i2c";
1198                         reg = <0x01c2b000 0x400>;
1199                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
1200                         clocks = <&ccu CLK_APB1_I2C1>;
1201                         status = "disabled";
1202                         #address-cells = <1>;
1203                         #size-cells = <0>;
1204                 };
1205
1206                 i2c2: i2c@1c2b400 {
1207                         compatible = "allwinner,sun7i-a20-i2c",
1208                                      "allwinner,sun4i-a10-i2c";
1209                         reg = <0x01c2b400 0x400>;
1210                         interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
1211                         clocks = <&ccu CLK_APB1_I2C2>;
1212                         status = "disabled";
1213                         #address-cells = <1>;
1214                         #size-cells = <0>;
1215                 };
1216
1217                 i2c3: i2c@1c2b800 {
1218                         compatible = "allwinner,sun7i-a20-i2c",
1219                                      "allwinner,sun4i-a10-i2c";
1220                         reg = <0x01c2b800 0x400>;
1221                         interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
1222                         clocks = <&ccu CLK_APB1_I2C3>;
1223                         status = "disabled";
1224                         #address-cells = <1>;
1225                         #size-cells = <0>;
1226                 };
1227
1228                 can0: can@1c2bc00 {
1229                         compatible = "allwinner,sun7i-a20-can",
1230                                      "allwinner,sun4i-a10-can";
1231                         reg = <0x01c2bc00 0x400>;
1232                         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
1233                         clocks = <&ccu CLK_APB1_CAN>;
1234                         status = "disabled";
1235                 };
1236
1237                 i2c4: i2c@1c2c000 {
1238                         compatible = "allwinner,sun7i-a20-i2c",
1239                                      "allwinner,sun4i-a10-i2c";
1240                         reg = <0x01c2c000 0x400>;
1241                         interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
1242                         clocks = <&ccu CLK_APB1_I2C4>;
1243                         status = "disabled";
1244                         #address-cells = <1>;
1245                         #size-cells = <0>;
1246                 };
1247
1248                 mali: gpu@1c40000 {
1249                         compatible = "allwinner,sun7i-a20-mali", "arm,mali-400";
1250                         reg = <0x01c40000 0x10000>;
1251                         interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
1252                                      <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
1253                                      <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
1254                                      <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
1255                                      <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
1256                                      <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
1257                                      <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
1258                         interrupt-names = "gp",
1259                                           "gpmmu",
1260                                           "pp0",
1261                                           "ppmmu0",
1262                                           "pp1",
1263                                           "ppmmu1",
1264                                           "pmu";
1265                         clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
1266                         clock-names = "bus", "core";
1267                         resets = <&ccu RST_GPU>;
1268
1269                         assigned-clocks = <&ccu CLK_GPU>;
1270                         assigned-clock-rates = <384000000>;
1271                 };
1272
1273                 gmac: ethernet@1c50000 {
1274                         compatible = "allwinner,sun7i-a20-gmac";
1275                         reg = <0x01c50000 0x10000>;
1276                         interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
1277                         interrupt-names = "macirq";
1278                         clocks = <&ccu CLK_AHB_GMAC>, <&gmac_tx_clk>;
1279                         clock-names = "stmmaceth", "allwinner_gmac_tx";
1280                         snps,pbl = <2>;
1281                         snps,fixed-burst;
1282                         snps,force_sf_dma_mode;
1283                         status = "disabled";
1284                         #address-cells = <1>;
1285                         #size-cells = <0>;
1286                 };
1287
1288                 hstimer@1c60000 {
1289                         compatible = "allwinner,sun7i-a20-hstimer";
1290                         reg = <0x01c60000 0x1000>;
1291                         interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
1292                                      <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
1293                                      <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
1294                                      <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
1295                         clocks = <&ccu CLK_AHB_HSTIMER>;
1296                 };
1297
1298                 gic: interrupt-controller@1c81000 {
1299                         compatible = "arm,gic-400", "arm,cortex-a7-gic", "arm,cortex-a15-gic";
1300                         reg = <0x01c81000 0x1000>,
1301                               <0x01c82000 0x2000>,
1302                               <0x01c84000 0x2000>,
1303                               <0x01c86000 0x2000>;
1304                         interrupt-controller;
1305                         #interrupt-cells = <3>;
1306                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
1307                 };
1308
1309                 fe0: display-frontend@1e00000 {
1310                         compatible = "allwinner,sun7i-a20-display-frontend";
1311                         reg = <0x01e00000 0x20000>;
1312                         interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
1313                         clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>,
1314                                  <&ccu CLK_DRAM_DE_FE0>;
1315                         clock-names = "ahb", "mod",
1316                                       "ram";
1317                         resets = <&ccu RST_DE_FE0>;
1318
1319                         ports {
1320                                 #address-cells = <1>;
1321                                 #size-cells = <0>;
1322
1323                                 fe0_out: port@1 {
1324                                         #address-cells = <1>;
1325                                         #size-cells = <0>;
1326                                         reg = <1>;
1327
1328                                         fe0_out_be0: endpoint@0 {
1329                                                 reg = <0>;
1330                                                 remote-endpoint = <&be0_in_fe0>;
1331                                         };
1332
1333                                         fe0_out_be1: endpoint@1 {
1334                                                 reg = <1>;
1335                                                 remote-endpoint = <&be1_in_fe0>;
1336                                         };
1337                                 };
1338                         };
1339                 };
1340
1341                 fe1: display-frontend@1e20000 {
1342                         compatible = "allwinner,sun7i-a20-display-frontend";
1343                         reg = <0x01e20000 0x20000>;
1344                         interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
1345                         clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>,
1346                                  <&ccu CLK_DRAM_DE_FE1>;
1347                         clock-names = "ahb", "mod",
1348                                       "ram";
1349                         resets = <&ccu RST_DE_FE1>;
1350
1351                         ports {
1352                                 #address-cells = <1>;
1353                                 #size-cells = <0>;
1354
1355                                 fe1_out: port@1 {
1356                                         #address-cells = <1>;
1357                                         #size-cells = <0>;
1358                                         reg = <1>;
1359
1360                                         fe1_out_be0: endpoint@0 {
1361                                                 reg = <0>;
1362                                                 remote-endpoint = <&be0_in_fe1>;
1363                                         };
1364
1365                                         fe1_out_be1: endpoint@1 {
1366                                                 reg = <1>;
1367                                                 remote-endpoint = <&be1_in_fe1>;
1368                                         };
1369                                 };
1370                         };
1371                 };
1372
1373                 be1: display-backend@1e40000 {
1374                         compatible = "allwinner,sun7i-a20-display-backend";
1375                         reg = <0x01e40000 0x10000>;
1376                         interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
1377                         clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>,
1378                                  <&ccu CLK_DRAM_DE_BE1>;
1379                         clock-names = "ahb", "mod",
1380                                       "ram";
1381                         resets = <&ccu RST_DE_BE1>;
1382
1383                         ports {
1384                                 #address-cells = <1>;
1385                                 #size-cells = <0>;
1386
1387                                 be1_in: port@0 {
1388                                         #address-cells = <1>;
1389                                         #size-cells = <0>;
1390                                         reg = <0>;
1391
1392                                         be1_in_fe0: endpoint@0 {
1393                                                 reg = <0>;
1394                                                 remote-endpoint = <&fe0_out_be1>;
1395                                         };
1396
1397                                         be1_in_fe1: endpoint@1 {
1398                                                 reg = <1>;
1399                                                 remote-endpoint = <&fe1_out_be1>;
1400                                         };
1401                                 };
1402
1403                                 be1_out: port@1 {
1404                                         #address-cells = <1>;
1405                                         #size-cells = <0>;
1406                                         reg = <1>;
1407
1408                                         be1_out_tcon0: endpoint@0 {
1409                                                 reg = <0>;
1410                                                 remote-endpoint = <&tcon0_in_be1>;
1411                                         };
1412
1413                                         be1_out_tcon1: endpoint@1 {
1414                                                 reg = <1>;
1415                                                 remote-endpoint = <&tcon1_in_be1>;
1416                                         };
1417                                 };
1418                         };
1419                 };
1420
1421                 be0: display-backend@1e60000 {
1422                         compatible = "allwinner,sun7i-a20-display-backend";
1423                         reg = <0x01e60000 0x10000>;
1424                         interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
1425                         clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
1426                                  <&ccu CLK_DRAM_DE_BE0>;
1427                         clock-names = "ahb", "mod",
1428                                       "ram";
1429                         resets = <&ccu RST_DE_BE0>;
1430
1431                         ports {
1432                                 #address-cells = <1>;
1433                                 #size-cells = <0>;
1434
1435                                 be0_in: port@0 {
1436                                         #address-cells = <1>;
1437                                         #size-cells = <0>;
1438                                         reg = <0>;
1439
1440                                         be0_in_fe0: endpoint@0 {
1441                                                 reg = <0>;
1442                                                 remote-endpoint = <&fe0_out_be0>;
1443                                         };
1444
1445                                         be0_in_fe1: endpoint@1 {
1446                                                 reg = <1>;
1447                                                 remote-endpoint = <&fe1_out_be0>;
1448                                         };
1449                                 };
1450
1451                                 be0_out: port@1 {
1452                                         #address-cells = <1>;
1453                                         #size-cells = <0>;
1454                                         reg = <1>;
1455
1456                                         be0_out_tcon0: endpoint@0 {
1457                                                 reg = <0>;
1458                                                 remote-endpoint = <&tcon0_in_be0>;
1459                                         };
1460
1461                                         be0_out_tcon1: endpoint@1 {
1462                                                 reg = <1>;
1463                                                 remote-endpoint = <&tcon1_in_be0>;
1464                                         };
1465                                 };
1466                         };
1467                 };
1468         };
1469 };