sys/gnu/dts/arm/sun8i-r40.dtsi

   1 /*
   2  * Copyright 2017 Chen-Yu Tsai <wens@csie.org>
   3  * Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
   4  *
   5  * This file is dual-licensed: you can use it either under the terms
   6  * of the GPL or the X11 license, at your option. Note that this dual
   7  * licensing only applies to this file, and not this project as a
   8  * whole.
   9  *
  10  *  a) This file is free software; you can redistribute it and/or
  11  *     modify it under the terms of the GNU General Public License as
  12  *     published by the Free Software Foundation; either version 2 of the
  13  *     License, or (at your option) any later version.
  14  *
  15  *     This file is distributed in the hope that it will be useful,
  16  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  *     GNU General Public License for more details.
  19  *
  20  * Or, alternatively,
  21  *
  22  *  b) Permission is hereby granted, free of charge, to any person
  23  *     obtaining a copy of this software and associated documentation
  24  *     files (the "Software"), to deal in the Software without
  25  *     restriction, including without limitation the rights to use,
  26  *     copy, modify, merge, publish, distribute, sublicense, and/or
  27  *     sell copies of the Software, and to permit persons to whom the
  28  *     Software is furnished to do so, subject to the following
  29  *     conditions:
  30  *
  31  *     The above copyright notice and this permission notice shall be
  32  *     included in all copies or substantial portions of the Software.
  33  *
  34  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  35  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  36  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  37  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  38  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  39  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  40  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  41  *     OTHER DEALINGS IN THE SOFTWARE.
  42  */
  43
  44 #include <dt-bindings/interrupt-controller/arm-gic.h>
  45 #include <dt-bindings/clock/sun8i-de2.h>
  46 #include <dt-bindings/clock/sun8i-r40-ccu.h>
  47 #include <dt-bindings/reset/sun8i-r40-ccu.h>
  48 #include <dt-bindings/reset/sun8i-de2.h>
  49
  50 / {
  51         #address-cells = <1>;
  52         #size-cells = <1>;
  53         interrupt-parent = <&gic>;
  54
  55         clocks {
  56                 #address-cells = <1>;
  57                 #size-cells = <1>;
  58                 ranges;
  59
  60                 osc24M: osc24M {
  61                         #clock-cells = <0>;
  62                         compatible = "fixed-clock";
  63                         clock-frequency = <24000000>;
  64                         clock-accuracy = <50000>;
  65                         clock-output-names = "osc24M";
  66                 };
  67
  68                 osc32k: osc32k {
  69                         #clock-cells = <0>;
  70                         compatible = "fixed-clock";
  71                         clock-frequency = <32768>;
  72                         clock-accuracy = <20000>;
  73                         clock-output-names = "ext-osc32k";
  74                 };
  75         };
  76
  77         cpus {
  78                 #address-cells = <1>;
  79                 #size-cells = <0>;
  80
  81                 cpu@0 {
  82                         compatible = "arm,cortex-a7";
  83                         device_type = "cpu";
  84                         reg = <0>;
  85                 };
  86
  87                 cpu@1 {
  88                         compatible = "arm,cortex-a7";
  89                         device_type = "cpu";
  90                         reg = <1>;
  91                 };
  92
  93                 cpu@2 {
  94                         compatible = "arm,cortex-a7";
  95                         device_type = "cpu";
  96                         reg = <2>;
  97                 };
  98
  99                 cpu@3 {
 100                         compatible = "arm,cortex-a7";
 101                         device_type = "cpu";
 102                         reg = <3>;
 103                 };
 104         };
 105
 106         de: display-engine {
 107                 compatible = "allwinner,sun8i-r40-display-engine";
 108                 allwinner,pipelines = <&mixer0>, <&mixer1>;
 109                 status = "disabled";
 110         };
 111
 112         soc {
 113                 compatible = "simple-bus";
 114                 #address-cells = <1>;
 115                 #size-cells = <1>;
 116                 ranges;
 117
 118                 display_clocks: clock@1000000 {
 119                         compatible = "allwinner,sun8i-r40-de2-clk",
 120                                      "allwinner,sun8i-h3-de2-clk";
 121                         reg = <0x01000000 0x100000>;
 122                         clocks = <&ccu CLK_BUS_DE>,
 123                                  <&ccu CLK_DE>;
 124                         clock-names = "bus",
 125                                       "mod";
 126                         resets = <&ccu RST_BUS_DE>;
 127                         #clock-cells = <1>;
 128                         #reset-cells = <1>;
 129                 };
 130
 131                 mixer0: mixer@1100000 {
 132                         compatible = "allwinner,sun8i-r40-de2-mixer-0";
 133                         reg = <0x01100000 0x100000>;
 134                         clocks = <&display_clocks CLK_BUS_MIXER0>,
 135                                  <&display_clocks CLK_MIXER0>;
 136                         clock-names = "bus",
 137                                       "mod";
 138                         resets = <&display_clocks RST_MIXER0>;
 139
 140                         ports {
 141                                 #address-cells = <1>;
 142                                 #size-cells = <0>;
 143
 144                                 mixer0_out: port@1 {
 145                                         reg = <1>;
 146                                         mixer0_out_tcon_top: endpoint {
 147                                                 remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
 148                                         };
 149                                 };
 150                         };
 151                 };
 152
 153                 mixer1: mixer@1200000 {
 154                         compatible = "allwinner,sun8i-r40-de2-mixer-1";
 155                         reg = <0x01200000 0x100000>;
 156                         clocks = <&display_clocks CLK_BUS_MIXER1>,
 157                                  <&display_clocks CLK_MIXER1>;
 158                         clock-names = "bus",
 159                                       "mod";
 160                         resets = <&display_clocks RST_WB>;
 161
 162                         ports {
 163                                 #address-cells = <1>;
 164                                 #size-cells = <0>;
 165
 166                                 mixer1_out: port@1 {
 167                                         reg = <1>;
 168                                         mixer1_out_tcon_top: endpoint {
 169                                                 remote-endpoint = <&tcon_top_mixer1_in_mixer1>;
 170                                         };
 171                                 };
 172                         };
 173                 };
 174
 175                 nmi_intc: interrupt-controller@1c00030 {
 176                         compatible = "allwinner,sun7i-a20-sc-nmi";
 177                         interrupt-controller;
 178                         #interrupt-cells = <2>;
 179                         reg = <0x01c00030 0x0c>;
 180                         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 181                 };
 182
 183                 mmc0: mmc@1c0f000 {
 184                         compatible = "allwinner,sun8i-r40-mmc",
 185                                      "allwinner,sun50i-a64-mmc";
 186                         reg = <0x01c0f000 0x1000>;
 187                         clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
 188                         clock-names = "ahb", "mmc";
 189                         resets = <&ccu RST_BUS_MMC0>;
 190                         reset-names = "ahb";
 191                         pinctrl-0 = <&mmc0_pins>;
 192                         pinctrl-names = "default";
 193                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 194                         status = "disabled";
 195                         #address-cells = <1>;
 196                         #size-cells = <0>;
 197                 };
 198
 199                 mmc1: mmc@1c10000 {
 200                         compatible = "allwinner,sun8i-r40-mmc",
 201                                      "allwinner,sun50i-a64-mmc";
 202                         reg = <0x01c10000 0x1000>;
 203                         clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
 204                         clock-names = "ahb", "mmc";
 205                         resets = <&ccu RST_BUS_MMC1>;
 206                         reset-names = "ahb";
 207                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 208                         status = "disabled";
 209                         #address-cells = <1>;
 210                         #size-cells = <0>;
 211                 };
 212
 213                 mmc2: mmc@1c11000 {
 214                         compatible = "allwinner,sun8i-r40-emmc",
 215                                      "allwinner,sun50i-a64-emmc";
 216                         reg = <0x01c11000 0x1000>;
 217                         clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
 218                         clock-names = "ahb", "mmc";
 219                         resets = <&ccu RST_BUS_MMC2>;
 220                         reset-names = "ahb";
 221                         pinctrl-0 = <&mmc2_pins>;
 222                         pinctrl-names = "default";
 223                         interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 224                         status = "disabled";
 225                         #address-cells = <1>;
 226                         #size-cells = <0>;
 227                 };
 228
 229                 mmc3: mmc@1c12000 {
 230                         compatible = "allwinner,sun8i-r40-mmc",
 231                                      "allwinner,sun50i-a64-mmc";
 232                         reg = <0x01c12000 0x1000>;
 233                         clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>;
 234                         clock-names = "ahb", "mmc";
 235                         resets = <&ccu RST_BUS_MMC3>;
 236                         reset-names = "ahb";
 237                         interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 238                         status = "disabled";
 239                         #address-cells = <1>;
 240                         #size-cells = <0>;
 241                 };
 242
 243                 usbphy: phy@1c13400 {
 244                         compatible = "allwinner,sun8i-r40-usb-phy";
 245                         reg = <0x01c13400 0x14>,
 246                               <0x01c14800 0x4>,
 247                               <0x01c19800 0x4>,
 248                               <0x01c1c800 0x4>;
 249                         reg-names = "phy_ctrl",
 250                                     "pmu0",
 251                                     "pmu1",
 252                                     "pmu2";
 253                         clocks = <&ccu CLK_USB_PHY0>,
 254                                  <&ccu CLK_USB_PHY1>,
 255                                  <&ccu CLK_USB_PHY2>;
 256                         clock-names = "usb0_phy",
 257                                       "usb1_phy",
 258                                       "usb2_phy";
 259                         resets = <&ccu RST_USB_PHY0>,
 260                                  <&ccu RST_USB_PHY1>,
 261                                  <&ccu RST_USB_PHY2>;
 262                         reset-names = "usb0_reset",
 263                                       "usb1_reset",
 264                                       "usb2_reset";
 265                         status = "disabled";
 266                         #phy-cells = <1>;
 267                 };
 268
 269                 ehci1: usb@1c19000 {
 270                         compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
 271                         reg = <0x01c19000 0x100>;
 272                         interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 273                         clocks = <&ccu CLK_BUS_EHCI1>;
 274                         resets = <&ccu RST_BUS_EHCI1>;
 275                         phys = <&usbphy 1>;
 276                         phy-names = "usb";
 277                         status = "disabled";
 278                 };
 279
 280                 ohci1: usb@1c19400 {
 281                         compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
 282                         reg = <0x01c19400 0x100>;
 283                         interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 284                         clocks = <&ccu CLK_BUS_OHCI1>,
 285                                  <&ccu CLK_USB_OHCI1>;
 286                         resets = <&ccu RST_BUS_OHCI1>;
 287                         phys = <&usbphy 1>;
 288                         phy-names = "usb";
 289                         status = "disabled";
 290                 };
 291
 292                 ehci2: usb@1c1c000 {
 293                         compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
 294                         reg = <0x01c1c000 0x100>;
 295                         interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 296                         clocks = <&ccu CLK_BUS_EHCI2>;
 297                         resets = <&ccu RST_BUS_EHCI2>;
 298                         phys = <&usbphy 2>;
 299                         phy-names = "usb";
 300                         status = "disabled";
 301                 };
 302
 303                 ohci2: usb@1c1c400 {
 304                         compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
 305                         reg = <0x01c1c400 0x100>;
 306                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 307                         clocks = <&ccu CLK_BUS_OHCI2>,
 308                                  <&ccu CLK_USB_OHCI2>;
 309                         resets = <&ccu RST_BUS_OHCI2>;
 310                         phys = <&usbphy 2>;
 311                         phy-names = "usb";
 312                         status = "disabled";
 313                 };
 314
 315                 ccu: clock@1c20000 {
 316                         compatible = "allwinner,sun8i-r40-ccu";
 317                         reg = <0x01c20000 0x400>;
 318                         clocks = <&osc24M>, <&rtc 0>;
 319                         clock-names = "hosc", "losc";
 320                         #clock-cells = <1>;
 321                         #reset-cells = <1>;
 322                 };
 323
 324                 rtc: rtc@1c20400 {
 325                         compatible = "allwinner,sun8i-r40-rtc";
 326                         reg = <0x01c20400 0x400>;
 327                         interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 328                         clock-output-names = "osc32k", "osc32k-out";
 329                         clocks = <&osc32k>;
 330                         #clock-cells = <1>;
 331                 };
 332
 333                 pio: pinctrl@1c20800 {
 334                         compatible = "allwinner,sun8i-r40-pinctrl";
 335                         reg = <0x01c20800 0x400>;
 336                         interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 337                         clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
 338                         clock-names = "apb", "hosc", "losc";
 339                         gpio-controller;
 340                         interrupt-controller;
 341                         #interrupt-cells = <3>;
 342                         #gpio-cells = <3>;
 343
 344                         clk_out_a_pin: clk-out-a-pin {
 345                                 pins = "PI12";
 346                                 function = "clk_out_a";
 347                         };
 348
 349                         gmac_rgmii_pins: gmac-rgmii-pins {
 350                                 pins = "PA0", "PA1", "PA2", "PA3",
 351                                        "PA4", "PA5", "PA6", "PA7",
 352                                        "PA8", "PA10", "PA11", "PA12",
 353                                        "PA13", "PA15", "PA16";
 354                                 function = "gmac";
 355                                 /*
 356                                  * data lines in RGMII mode use DDR mode
 357                                  * and need a higher signal drive strength
 358                                  */
 359                                 drive-strength = <40>;
 360                         };
 361
 362                         i2c0_pins: i2c0-pins {
 363                                 pins = "PB0", "PB1";
 364                                 function = "i2c0";
 365                         };
 366
 367                         mmc0_pins: mmc0-pins {
 368                                 pins = "PF0", "PF1", "PF2",
 369                                        "PF3", "PF4", "PF5";
 370                                 function = "mmc0";
 371                                 drive-strength = <30>;
 372                                 bias-pull-up;
 373                         };
 374
 375                         mmc1_pg_pins: mmc1-pg-pins {
 376                                 pins = "PG0", "PG1", "PG2",
 377                                        "PG3", "PG4", "PG5";
 378                                 function = "mmc1";
 379                                 drive-strength = <30>;
 380                                 bias-pull-up;
 381                         };
 382
 383                         mmc2_pins: mmc2-pins {
 384                                 pins = "PC5", "PC6", "PC7", "PC8", "PC9",
 385                                        "PC10", "PC11", "PC12", "PC13", "PC14",
 386                                        "PC15", "PC24";
 387                                 function = "mmc2";
 388                                 drive-strength = <30>;
 389                                 bias-pull-up;
 390                         };
 391
 392                         uart0_pb_pins: uart0-pb-pins {
 393                                 pins = "PB22", "PB23";
 394                                 function = "uart0";
 395                         };
 396
 397                         uart3_pg_pins: uart3-pg-pins {
 398                                 pins = "PG6", "PG7";
 399                                 function = "uart3";
 400                         };
 401
 402                         uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins {
 403                                 pins = "PG8", "PG9";
 404                                 function = "uart3";
 405                         };
 406                 };
 407
 408                 wdt: watchdog@1c20c90 {
 409                         compatible = "allwinner,sun4i-a10-wdt";
 410                         reg = <0x01c20c90 0x10>;
 411                         interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 412                         clocks = <&osc24M>;
 413                 };
 414
 415                 uart0: serial@1c28000 {
 416                         compatible = "snps,dw-apb-uart";
 417                         reg = <0x01c28000 0x400>;
 418                         interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 419                         reg-shift = <2>;
 420                         reg-io-width = <4>;
 421                         clocks = <&ccu CLK_BUS_UART0>;
 422                         resets = <&ccu RST_BUS_UART0>;
 423                         status = "disabled";
 424                 };
 425
 426                 uart1: serial@1c28400 {
 427                         compatible = "snps,dw-apb-uart";
 428                         reg = <0x01c28400 0x400>;
 429                         interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 430                         reg-shift = <2>;
 431                         reg-io-width = <4>;
 432                         clocks = <&ccu CLK_BUS_UART1>;
 433                         resets = <&ccu RST_BUS_UART1>;
 434                         status = "disabled";
 435                 };
 436
 437                 uart2: serial@1c28800 {
 438                         compatible = "snps,dw-apb-uart";
 439                         reg = <0x01c28800 0x400>;
 440                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 441                         reg-shift = <2>;
 442                         reg-io-width = <4>;
 443                         clocks = <&ccu CLK_BUS_UART2>;
 444                         resets = <&ccu RST_BUS_UART2>;
 445                         status = "disabled";
 446                 };
 447
 448                 uart3: serial@1c28c00 {
 449                         compatible = "snps,dw-apb-uart";
 450                         reg = <0x01c28c00 0x400>;
 451                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 452                         reg-shift = <2>;
 453                         reg-io-width = <4>;
 454                         clocks = <&ccu CLK_BUS_UART3>;
 455                         resets = <&ccu RST_BUS_UART3>;
 456                         status = "disabled";
 457                 };
 458
 459                 uart4: serial@1c29000 {
 460                         compatible = "snps,dw-apb-uart";
 461                         reg = <0x01c29000 0x400>;
 462                         interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 463                         reg-shift = <2>;
 464                         reg-io-width = <4>;
 465                         clocks = <&ccu CLK_BUS_UART4>;
 466                         resets = <&ccu RST_BUS_UART4>;
 467                         status = "disabled";
 468                 };
 469
 470                 uart5: serial@1c29400 {
 471                         compatible = "snps,dw-apb-uart";
 472                         reg = <0x01c29400 0x400>;
 473                         interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 474                         reg-shift = <2>;
 475                         reg-io-width = <4>;
 476                         clocks = <&ccu CLK_BUS_UART5>;
 477                         resets = <&ccu RST_BUS_UART5>;
 478                         status = "disabled";
 479                 };
 480
 481                 uart6: serial@1c29800 {
 482                         compatible = "snps,dw-apb-uart";
 483                         reg = <0x01c29800 0x400>;
 484                         interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 485                         reg-shift = <2>;
 486                         reg-io-width = <4>;
 487                         clocks = <&ccu CLK_BUS_UART6>;
 488                         resets = <&ccu RST_BUS_UART6>;
 489                         status = "disabled";
 490                 };
 491
 492                 uart7: serial@1c29c00 {
 493                         compatible = "snps,dw-apb-uart";
 494                         reg = <0x01c29c00 0x400>;
 495                         interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 496                         reg-shift = <2>;
 497                         reg-io-width = <4>;
 498                         clocks = <&ccu CLK_BUS_UART7>;
 499                         resets = <&ccu RST_BUS_UART7>;
 500                         status = "disabled";
 501                 };
 502
 503                 i2c0: i2c@1c2ac00 {
 504                         compatible = "allwinner,sun6i-a31-i2c";
 505                         reg = <0x01c2ac00 0x400>;
 506                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 507                         clocks = <&ccu CLK_BUS_I2C0>;
 508                         resets = <&ccu RST_BUS_I2C0>;
 509                         pinctrl-0 = <&i2c0_pins>;
 510                         pinctrl-names = "default";
 511                         status = "disabled";
 512                         #address-cells = <1>;
 513                         #size-cells = <0>;
 514                 };
 515
 516                 i2c1: i2c@1c2b000 {
 517                         compatible = "allwinner,sun6i-a31-i2c";
 518                         reg = <0x01c2b000 0x400>;
 519                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 520                         clocks = <&ccu CLK_BUS_I2C1>;
 521                         resets = <&ccu RST_BUS_I2C1>;
 522                         status = "disabled";
 523                         #address-cells = <1>;
 524                         #size-cells = <0>;
 525                 };
 526
 527                 i2c2: i2c@1c2b400 {
 528                         compatible = "allwinner,sun6i-a31-i2c";
 529                         reg = <0x01c2b400 0x400>;
 530                         interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 531                         clocks = <&ccu CLK_BUS_I2C2>;
 532                         resets = <&ccu RST_BUS_I2C2>;
 533                         status = "disabled";
 534                         #address-cells = <1>;
 535                         #size-cells = <0>;
 536                 };
 537
 538                 i2c3: i2c@1c2b800 {
 539                         compatible = "allwinner,sun6i-a31-i2c";
 540                         reg = <0x01c2b800 0x400>;
 541                         interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 542                         clocks = <&ccu CLK_BUS_I2C3>;
 543                         resets = <&ccu RST_BUS_I2C3>;
 544                         status = "disabled";
 545                         #address-cells = <1>;
 546                         #size-cells = <0>;
 547                 };
 548
 549                 i2c4: i2c@1c2c000 {
 550                         compatible = "allwinner,sun6i-a31-i2c";
 551                         reg = <0x01c2c000 0x400>;
 552                         interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 553                         clocks = <&ccu CLK_BUS_I2C4>;
 554                         resets = <&ccu RST_BUS_I2C4>;
 555                         status = "disabled";
 556                         #address-cells = <1>;
 557                         #size-cells = <0>;
 558                 };
 559
 560                 ahci: sata@1c18000 {
 561                         compatible = "allwinner,sun8i-r40-ahci";
 562                         reg = <0x01c18000 0x1000>;
 563                         interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 564                         clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
 565                         resets = <&ccu RST_BUS_SATA>;
 566                         reset-names = "ahci";
 567                         status = "disabled";
 568
 569                 };
 570
 571                 gmac: ethernet@1c50000 {
 572                         compatible = "allwinner,sun8i-r40-gmac";
 573                         syscon = <&ccu>;
 574                         reg = <0x01c50000 0x10000>;
 575                         interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 576                         interrupt-names = "macirq";
 577                         resets = <&ccu RST_BUS_GMAC>;
 578                         reset-names = "stmmaceth";
 579                         clocks = <&ccu CLK_BUS_GMAC>;
 580                         clock-names = "stmmaceth";
 581                         status = "disabled";
 582
 583                         gmac_mdio: mdio {
 584                                 compatible = "snps,dwmac-mdio";
 585                                 #address-cells = <1>;
 586                                 #size-cells = <0>;
 587                         };
 588                 };
 589
 590                 tcon_top: tcon-top@1c70000 {
 591                         compatible = "allwinner,sun8i-r40-tcon-top";
 592                         reg = <0x01c70000 0x1000>;
 593                         clocks = <&ccu CLK_BUS_TCON_TOP>,
 594                                  <&ccu CLK_TCON_TV0>,
 595                                  <&ccu CLK_TVE0>,
 596                                  <&ccu CLK_TCON_TV1>,
 597                                  <&ccu CLK_TVE1>,
 598                                  <&ccu CLK_DSI_DPHY>;
 599                         clock-names = "bus",
 600                                       "tcon-tv0",
 601                                       "tve0",
 602                                       "tcon-tv1",
 603                                       "tve1",
 604                                       "dsi";
 605                         clock-output-names = "tcon-top-tv0",
 606                                              "tcon-top-tv1",
 607                                              "tcon-top-dsi";
 608                         resets = <&ccu RST_BUS_TCON_TOP>;
 609                         #clock-cells = <1>;
 610
 611                         ports {
 612                                 #address-cells = <1>;
 613                                 #size-cells = <0>;
 614
 615                                 tcon_top_mixer0_in: port@0 {
 616                                         reg = <0>;
 617
 618                                         tcon_top_mixer0_in_mixer0: endpoint {
 619                                                 remote-endpoint = <&mixer0_out_tcon_top>;
 620                                         };
 621                                 };
 622
 623                                 tcon_top_mixer0_out: port@1 {
 624                                         #address-cells = <1>;
 625                                         #size-cells = <0>;
 626                                         reg = <1>;
 627
 628                                         tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
 629                                                 reg = <0>;
 630                                         };
 631
 632                                         tcon_top_mixer0_out_tcon_lcd1: endpoint@1 {
 633                                                 reg = <1>;
 634                                         };
 635
 636                                         tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
 637                                                 reg = <2>;
 638                                                 remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>;
 639                                         };
 640
 641                                         tcon_top_mixer0_out_tcon_tv1: endpoint@3 {
 642                                                 reg = <3>;
 643                                                 remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>;
 644                                         };
 645                                 };
 646
 647                                 tcon_top_mixer1_in: port@2 {
 648                                         #address-cells = <1>;
 649                                         #size-cells = <0>;
 650                                         reg = <2>;
 651
 652                                         tcon_top_mixer1_in_mixer1: endpoint@1 {
 653                                                 reg = <1>;
 654                                                 remote-endpoint = <&mixer1_out_tcon_top>;
 655                                         };
 656                                 };
 657
 658                                 tcon_top_mixer1_out: port@3 {
 659                                         #address-cells = <1>;
 660                                         #size-cells = <0>;
 661                                         reg = <3>;
 662
 663                                         tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
 664                                                 reg = <0>;
 665                                         };
 666
 667                                         tcon_top_mixer1_out_tcon_lcd1: endpoint@1 {
 668                                                 reg = <1>;
 669                                         };
 670
 671                                         tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
 672                                                 reg = <2>;
 673                                                 remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>;
 674                                         };
 675
 676                                         tcon_top_mixer1_out_tcon_tv1: endpoint@3 {
 677                                                 reg = <3>;
 678                                                 remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>;
 679                                         };
 680                                 };
 681
 682                                 tcon_top_hdmi_in: port@4 {
 683                                         #address-cells = <1>;
 684                                         #size-cells = <0>;
 685                                         reg = <4>;
 686
 687                                         tcon_top_hdmi_in_tcon_tv0: endpoint@0 {
 688                                                 reg = <0>;
 689                                                 remote-endpoint = <&tcon_tv0_out_tcon_top>;
 690                                         };
 691
 692                                         tcon_top_hdmi_in_tcon_tv1: endpoint@1 {
 693                                                 reg = <1>;
 694                                                 remote-endpoint = <&tcon_tv1_out_tcon_top>;
 695                                         };
 696                                 };
 697
 698                                 tcon_top_hdmi_out: port@5 {
 699                                         reg = <5>;
 700
 701                                         tcon_top_hdmi_out_hdmi: endpoint {
 702                                                 remote-endpoint = <&hdmi_in_tcon_top>;
 703                                         };
 704                                 };
 705                         };
 706                 };
 707
 708                 tcon_tv0: lcd-controller@1c73000 {
 709                         compatible = "allwinner,sun8i-r40-tcon-tv";
 710                         reg = <0x01c73000 0x1000>;
 711                         interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 712                         clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>;
 713                         clock-names = "ahb", "tcon-ch1";
 714                         resets = <&ccu RST_BUS_TCON_TV0>;
 715                         reset-names = "lcd";
 716                         status = "disabled";
 717
 718                         ports {
 719                                 #address-cells = <1>;
 720                                 #size-cells = <0>;
 721
 722                                 tcon_tv0_in: port@0 {
 723                                         #address-cells = <1>;
 724                                         #size-cells = <0>;
 725                                         reg = <0>;
 726
 727                                         tcon_tv0_in_tcon_top_mixer0: endpoint@0 {
 728                                                 reg = <0>;
 729                                                 remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
 730                                         };
 731
 732                                         tcon_tv0_in_tcon_top_mixer1: endpoint@1 {
 733                                                 reg = <1>;
 734                                                 remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>;
 735                                         };
 736                                 };
 737
 738                                 tcon_tv0_out: port@1 {
 739                                         #address-cells = <1>;
 740                                         #size-cells = <0>;
 741                                         reg = <1>;
 742
 743                                         tcon_tv0_out_tcon_top: endpoint@1 {
 744                                                 reg = <1>;
 745                                                 remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
 746                                         };
 747                                 };
 748                         };
 749                 };
 750
 751                 tcon_tv1: lcd-controller@1c74000 {
 752                         compatible = "allwinner,sun8i-r40-tcon-tv";
 753                         reg = <0x01c74000 0x1000>;
 754                         interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 755                         clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>;
 756                         clock-names = "ahb", "tcon-ch1";
 757                         resets = <&ccu RST_BUS_TCON_TV1>;
 758                         reset-names = "lcd";
 759                         status = "disabled";
 760
 761                         ports {
 762                                 #address-cells = <1>;
 763                                 #size-cells = <0>;
 764
 765                                 tcon_tv1_in: port@0 {
 766                                         #address-cells = <1>;
 767                                         #size-cells = <0>;
 768                                         reg = <0>;
 769
 770                                         tcon_tv1_in_tcon_top_mixer0: endpoint@0 {
 771                                                 reg = <0>;
 772                                                 remote-endpoint = <&tcon_top_mixer0_out_tcon_tv1>;
 773                                         };
 774
 775                                         tcon_tv1_in_tcon_top_mixer1: endpoint@1 {
 776                                                 reg = <1>;
 777                                                 remote-endpoint = <&tcon_top_mixer1_out_tcon_tv1>;
 778                                         };
 779                                 };
 780
 781                                 tcon_tv1_out: port@1 {
 782                                         #address-cells = <1>;
 783                                         #size-cells = <0>;
 784                                         reg = <1>;
 785
 786                                         tcon_tv1_out_tcon_top: endpoint@1 {
 787                                                 reg = <1>;
 788                                                 remote-endpoint = <&tcon_top_hdmi_in_tcon_tv1>;
 789                                         };
 790                                 };
 791                         };
 792                 };
 793
 794                 gic: interrupt-controller@1c81000 {
 795                         compatible = "arm,gic-400";
 796                         reg = <0x01c81000 0x1000>,
 797                               <0x01c82000 0x1000>,
 798                               <0x01c84000 0x2000>,
 799                               <0x01c86000 0x2000>;
 800                         interrupt-controller;
 801                         #interrupt-cells = <3>;
 802                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 803                 };
 804
 805                 hdmi: hdmi@1ee0000 {
 806                         compatible = "allwinner,sun8i-r40-dw-hdmi",
 807                                      "allwinner,sun8i-a83t-dw-hdmi";
 808                         reg = <0x01ee0000 0x10000>;
 809                         reg-io-width = <1>;
 810                         interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 811                         clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>,
 812                                  <&ccu CLK_HDMI>;
 813                         clock-names = "iahb", "isfr", "tmds";
 814                         resets = <&ccu RST_BUS_HDMI1>;
 815                         reset-names = "ctrl";
 816                         phys = <&hdmi_phy>;
 817                         phy-names = "phy";
 818                         status = "disabled";
 819
 820                         ports {
 821                                 #address-cells = <1>;
 822                                 #size-cells = <0>;
 823
 824                                 hdmi_in: port@0 {
 825                                         reg = <0>;
 826
 827                                         hdmi_in_tcon_top: endpoint {
 828                                                 remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
 829                                         };
 830                                 };
 831
 832                                 hdmi_out: port@1 {
 833                                         reg = <1>;
 834                                 };
 835                         };
 836                 };
 837
 838                 hdmi_phy: hdmi-phy@1ef0000 {
 839                         compatible = "allwinner,sun8i-r40-hdmi-phy";
 840                         reg = <0x01ef0000 0x10000>;
 841                         clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
 842                                  <&ccu 7>, <&ccu 16>;
 843                         clock-names = "bus", "mod", "pll-0", "pll-1";
 844                         resets = <&ccu RST_BUS_HDMI0>;
 845                         reset-names = "phy";
 846                         #phy-cells = <0>;
 847                 };
 848         };
 849
 850         timer {
 851                 compatible = "arm,armv7-timer";
 852                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 853                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 854                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 855                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 856         };
 857 };