1 // SPDX-License-Identifier: (GPL-2.0+ or MIT)
3 * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io>
8 #include "sun50i-h6.dtsi"
10 #include <dt-bindings/gpio/gpio.h>
14 compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
22 stdout-path = "serial0:115200n8";
26 compatible = "hdmi-connector";
30 hdmi_con_in: endpoint {
31 remote-endpoint = <&hdmi_out_con>;
37 compatible = "gpio-leds";
40 label = "pine-h64:green:heartbeat";
41 gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
45 label = "pine-h64:white:link";
46 gpios = <&r_pio 0 3 GPIO_ACTIVE_HIGH>; /* PL3 */
50 label = "pine-h64:blue:status";
51 gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
56 compatible = "regulator-fixed";
57 regulator-name = "usb-vbus";
58 regulator-min-microvolt = <5000000>;
59 regulator-max-microvolt = <5000000>;
60 startup-delay-us = <100000>;
61 gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>;
67 pinctrl-names = "default";
68 pinctrl-0 = <&ext_rgmii_pins>;
70 phy-handle = <&ext_rgmii_phy>;
71 phy-supply = <®_aldo2>;
72 allwinner,rx-delay-ps = <200>;
73 allwinner,tx-delay-ps = <200>;
78 ext_rgmii_phy: ethernet-phy@1 {
79 compatible = "ethernet-phy-ieee802.3-c22";
93 hdmi_out_con: endpoint {
94 remote-endpoint = <&hdmi_con_in>;
107 pinctrl-names = "default";
108 pinctrl-0 = <&mmc0_pins>;
109 vmmc-supply = <®_cldo1>;
110 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
116 pinctrl-names = "default";
117 pinctrl-0 = <&mmc2_pins>;
118 vmmc-supply = <®_cldo1>;
119 vqmmc-supply = <®_bldo2>;
138 compatible = "x-powers,axp805", "x-powers,axp806";
140 interrupt-parent = <&r_intc>;
141 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
142 interrupt-controller;
143 #interrupt-cells = <1>;
144 x-powers,self-working-mode;
149 regulator-min-microvolt = <3300000>;
150 regulator-max-microvolt = <3300000>;
151 regulator-name = "vcc-pl";
155 regulator-min-microvolt = <3300000>;
156 regulator-max-microvolt = <3300000>;
157 regulator-name = "vcc-ac200";
158 regulator-enable-ramp-delay = <100000>;
162 /* This regulator is connected with CLDO1 */
164 regulator-min-microvolt = <3300000>;
165 regulator-max-microvolt = <3300000>;
166 regulator-name = "vcc-3v3-1";
171 regulator-min-microvolt = <1800000>;
172 regulator-max-microvolt = <1800000>;
173 regulator-name = "vcc-bias-pll";
178 regulator-min-microvolt = <1800000>;
179 regulator-max-microvolt = <1800000>;
180 regulator-name = "vcc-efuse-pcie-hdmi-io";
185 regulator-min-microvolt = <1800000>;
186 regulator-max-microvolt = <1800000>;
187 regulator-name = "vcc-dcxoio";
195 /* This regulator is connected with ALDO3 */
197 regulator-min-microvolt = <3300000>;
198 regulator-max-microvolt = <3300000>;
199 regulator-name = "vcc-3v3-2";
203 regulator-min-microvolt = <3300000>;
204 regulator-max-microvolt = <3300000>;
205 regulator-name = "vcc-wifi-1";
209 regulator-min-microvolt = <3300000>;
210 regulator-max-microvolt = <3300000>;
211 regulator-name = "vcc-wifi-2";
216 regulator-min-microvolt = <810000>;
217 regulator-max-microvolt = <1080000>;
218 regulator-name = "vdd-cpu";
222 regulator-min-microvolt = <810000>;
223 regulator-max-microvolt = <1080000>;
224 regulator-name = "vdd-gpu";
229 regulator-min-microvolt = <960000>;
230 regulator-max-microvolt = <960000>;
231 regulator-name = "vdd-sys";
236 regulator-min-microvolt = <1200000>;
237 regulator-max-microvolt = <1200000>;
238 regulator-name = "vcc-dram";
248 compatible = "nxp,pcf8563";
255 pinctrl-names = "default";
256 pinctrl-0 = <&uart0_ph_pins>;
266 usb0_vbus-supply = <®_usb_vbus>;
267 usb3_vbus-supply = <®_usb_vbus>;