sys/gnu/dts/arm64/allwinner/sun50i-h6-tanix-tx6.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ or MIT)
   2 /*
   3  * Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
   4  */
   5
   6 /dts-v1/;
   7
   8 #include "sun50i-h6.dtsi"
   9
  10 #include <dt-bindings/gpio/gpio.h>
  11
  12 / {
  13         model = "Tanix TX6";
  14         compatible = "oranth,tanix-tx6", "allwinner,sun50i-h6";
  15
  16         aliases {
  17                 serial0 = &uart0;
  18         };
  19
  20         chosen {
  21                 stdout-path = "serial0:115200n8";
  22         };
  23
  24         connector {
  25                 compatible = "hdmi-connector";
  26                 ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
  27                 type = "a";
  28
  29                 port {
  30                         hdmi_con_in: endpoint {
  31                                 remote-endpoint = <&hdmi_out_con>;
  32                         };
  33                 };
  34         };
  35
  36         reg_vcc3v3: vcc3v3 {
  37                 compatible = "regulator-fixed";
  38                 regulator-name = "vcc3v3";
  39                 regulator-min-microvolt = <3300000>;
  40                 regulator-max-microvolt = <3300000>;
  41         };
  42 };
  43
  44 &de {
  45         status = "okay";
  46 };
  47
  48 &ehci0 {
  49         status = "okay";
  50 };
  51
  52 &ehci3 {
  53         status = "okay";
  54 };
  55
  56 &gpu {
  57         status = "okay";
  58 };
  59
  60 &hdmi {
  61         status = "okay";
  62 };
  63
  64 &hdmi_out {
  65         hdmi_out_con: endpoint {
  66                 remote-endpoint = <&hdmi_con_in>;
  67         };
  68 };
  69
  70 &mmc0 {
  71         pinctrl-names = "default";
  72         pinctrl-0 = <&mmc0_pins>;
  73         vmmc-supply = <&reg_vcc3v3>;
  74         cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
  75         bus-width = <4>;
  76         status = "okay";
  77 };
  78
  79 &ohci0 {
  80         status = "okay";
  81 };
  82
  83 &ohci3 {
  84         status = "okay";
  85 };
  86
  87 &r_ir {
  88         status = "okay";
  89 };
  90
  91 &uart0 {
  92         pinctrl-names = "default";
  93         pinctrl-0 = <&uart0_ph_pins>;
  94         status = "okay";
  95 };
  96
  97 &usb2otg {
  98         dr_mode = "host";
  99         status = "okay";
 100 };
 101
 102 &usb2phy {
 103         status = "okay";
 104 };