sys/gnu/dts/arm64/freescale/fsl-ls1088a-rdb.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Device Tree file for NXP LS1088A RDB Board.
   4  *
   5  * Copyright 2017 NXP
   6  *
   7  * Harninder Rai <harninder.rai@nxp.com>
   8  *
   9  */
  10
  11 /dts-v1/;
  12
  13 #include "fsl-ls1088a.dtsi"
  14
  15 / {
  16         model = "LS1088A RDB Board";
  17         compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
  18 };
  19
  20 &i2c0 {
  21         status = "okay";
  22
  23         i2c-switch@77 {
  24                 compatible = "nxp,pca9547";
  25                 reg = <0x77>;
  26                 #address-cells = <1>;
  27                 #size-cells = <0>;
  28
  29                 i2c@2 {
  30                         #address-cells = <1>;
  31                         #size-cells = <0>;
  32                         reg = <0x2>;
  33
  34                         ina220@40 {
  35                                 compatible = "ti,ina220";
  36                                 reg = <0x40>;
  37                                 shunt-resistor = <1000>;
  38                         };
  39                 };
  40
  41                 i2c@3 {
  42                         #address-cells = <1>;
  43                         #size-cells = <0>;
  44                         reg = <0x3>;
  45
  46                         temp-sensor@4c {
  47                                 compatible = "adi,adt7461a";
  48                                 reg = <0x4c>;
  49                         };
  50
  51                         rtc@51 {
  52                                 compatible = "nxp,pcf2129";
  53                                 reg = <0x51>;
  54                                 /* IRQ10_B */
  55                                 interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
  56                         };
  57                 };
  58         };
  59 };
  60
  61 &ifc {
  62         ranges = <0 0 0x5 0x30000000 0x00010000
  63                   2 0 0x5 0x20000000 0x00010000>;
  64         status = "okay";
  65
  66         nand@0,0 {
  67                 compatible = "fsl,ifc-nand";
  68                 reg = <0x0 0x0 0x10000>;
  69         };
  70
  71         fpga: board-control@2,0 {
  72                 compatible = "fsl,ls1088ardb-fpga", "fsl,fpga-qixis";
  73                 reg = <0x2 0x0 0x0000100>;
  74         };
  75 };
  76
  77 &duart0 {
  78         status = "okay";
  79 };
  80
  81 &duart1 {
  82         status = "okay";
  83 };
  84
  85 &esdhc {
  86         status = "okay";
  87 };
  88
  89 &sata {
  90         status = "okay";
  91 };
  92
  93 &usb0 {
  94         status = "okay";
  95 };
  96
  97 &usb1 {
  98         status = "okay";
  99 };