sys/gnu/dts/arm64/marvell/armada-3720-turris-mox.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Device Tree file for CZ.NIC Turris Mox Board
   4  * 2019 by Marek Behun <marek.behun@nic.cz>
   5  */
   6
   7 /dts-v1/;
   8
   9 #include <dt-bindings/bus/moxtet.h>
  10 #include <dt-bindings/gpio/gpio.h>
  11 #include <dt-bindings/input/input.h>
  12 #include "armada-372x.dtsi"
  13
  14 / {
  15         model = "CZ.NIC Turris Mox Board";
  16         compatible = "cznic,turris-mox", "marvell,armada3720",
  17                      "marvell,armada3710";
  18
  19         aliases {
  20                 spi0 = &spi0;
  21                 ethernet1 = &eth1;
  22         };
  23
  24         chosen {
  25                 stdout-path = "serial0:115200n8";
  26         };
  27
  28         memory@0 {
  29                 device_type = "memory";
  30                 reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
  31         };
  32
  33         leds {
  34                 compatible = "gpio-leds";
  35                 red {
  36                         label = "mox:red:activity";
  37                         gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>;
  38                         linux,default-trigger = "default-on";
  39                 };
  40         };
  41
  42         gpio-keys {
  43                 compatible = "gpio-keys";
  44
  45                 reset {
  46                         label = "reset";
  47                         linux,code = <KEY_RESTART>;
  48                         gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>;
  49                         debounce-interval = <60>;
  50                 };
  51         };
  52
  53         exp_usb3_vbus: usb3-vbus {
  54                 compatible = "regulator-fixed";
  55                 regulator-name = "usb3-vbus";
  56                 regulator-min-microvolt = <5000000>;
  57                 regulator-max-microvolt = <5000000>;
  58                 enable-active-high;
  59                 regulator-always-on;
  60                 gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>;
  61         };
  62
  63         vsdc_reg: vsdc-reg {
  64                 compatible = "regulator-gpio";
  65                 regulator-name = "vsdc";
  66                 regulator-min-microvolt = <1800000>;
  67                 regulator-max-microvolt = <3300000>;
  68                 regulator-boot-on;
  69
  70                 gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
  71                 gpios-states = <0>;
  72                 states = <1800000 0x1
  73                           3300000 0x0>;
  74                 enable-active-high;
  75         };
  76
  77         vsdio_reg: vsdio-reg {
  78                 compatible = "regulator-gpio";
  79                 regulator-name = "vsdio";
  80                 regulator-min-microvolt = <1800000>;
  81                 regulator-max-microvolt = <3300000>;
  82                 regulator-boot-on;
  83
  84                 gpios = <&gpiosb 22 GPIO_ACTIVE_HIGH>;
  85                 gpios-states = <0>;
  86                 states = <1800000 0x1
  87                           3300000 0x0>;
  88                 enable-active-high;
  89         };
  90
  91         sdhci1_pwrseq: sdhci1-pwrseq {
  92                 compatible = "mmc-pwrseq-simple";
  93                 reset-gpios = <&gpionb 19 GPIO_ACTIVE_HIGH>;
  94                 status = "okay";
  95         };
  96
  97         sfp: sfp {
  98                 compatible = "sff,sfp+";
  99                 i2c-bus = <&i2c0>;
 100                 los-gpio = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>;
 101                 tx-fault-gpio = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>;
 102                 mod-def0-gpio = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>;
 103                 tx-disable-gpio = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>;
 104                 rate-select0-gpio = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>;
 105
 106                 /* enabled by U-Boot if SFP module is present */
 107                 status = "disabled";
 108         };
 109
 110         firmware {
 111                 turris-mox-rwtm {
 112                         compatible = "cznic,turris-mox-rwtm";
 113                         mboxes = <&rwtm 0>;
 114                         status = "okay";
 115                 };
 116         };
 117 };
 118
 119 &i2c0 {
 120         pinctrl-names = "default";
 121         pinctrl-0 = <&i2c1_pins>;
 122         clock-frequency = <100000>;
 123         status = "okay";
 124
 125         rtc@6f {
 126                 compatible = "microchip,mcp7940x";
 127                 reg = <0x6f>;
 128         };
 129 };
 130
 131 &pcie_reset_pins {
 132         function = "gpio";
 133 };
 134
 135 &pcie0 {
 136         pinctrl-names = "default";
 137         pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
 138         status = "okay";
 139         max-link-speed = <2>;
 140         reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
 141         phys = <&comphy1 0>;
 142
 143         /* enabled by U-Boot if PCIe module is present */
 144         status = "disabled";
 145 };
 146
 147 &uart0 {
 148         status = "okay";
 149 };
 150
 151 &eth0 {
 152         pinctrl-names = "default";
 153         pinctrl-0 = <&rgmii_pins>;
 154         phy-mode = "rgmii-id";
 155         phy = <&phy1>;
 156         status = "okay";
 157 };
 158
 159 &eth1 {
 160         phy-mode = "2500base-x";
 161         managed = "in-band-status";
 162         phys = <&comphy0 1>;
 163 };
 164
 165 &sdhci0 {
 166         wp-inverted;
 167         bus-width = <4>;
 168         cd-gpios = <&gpionb 10 GPIO_ACTIVE_HIGH>;
 169         vqmmc-supply = <&vsdc_reg>;
 170         marvell,pad-type = "sd";
 171         status = "okay";
 172 };
 173
 174 &sdhci1 {
 175         pinctrl-names = "default";
 176         pinctrl-0 = <&sdio_pins>;
 177         non-removable;
 178         bus-width = <4>;
 179         marvell,pad-type = "sd";
 180         vqmmc-supply = <&vsdio_reg>;
 181         mmc-pwrseq = <&sdhci1_pwrseq>;
 182         status = "okay";
 183 };
 184
 185 &spi0 {
 186         status = "okay";
 187         pinctrl-names = "default";
 188         pinctrl-0 = <&spi_quad_pins &spi_cs1_pins>;
 189         assigned-clocks = <&nb_periph_clk 7>;
 190         assigned-clock-parents = <&tbg 1>;
 191         assigned-clock-rates = <20000000>;
 192
 193         spi-flash@0 {
 194                 #address-cells = <1>;
 195                 #size-cells = <1>;
 196                 compatible = "jedec,spi-nor";
 197                 reg = <0>;
 198                 spi-max-frequency = <20000000>;
 199
 200                 partitions {
 201                         compatible = "fixed-partitions";
 202                         #address-cells = <1>;
 203                         #size-cells = <1>;
 204
 205                         partition@0 {
 206                                 label = "secure-firmware";
 207                                 reg = <0x0 0x20000>;
 208                         };
 209
 210                         partition@20000 {
 211                                 label = "u-boot";
 212                                 reg = <0x20000 0x160000>;
 213                         };
 214
 215                         partition@180000 {
 216                                 label = "u-boot-env";
 217                                 reg = <0x180000 0x10000>;
 218                         };
 219
 220                         partition@190000 {
 221                                 label = "Rescue system";
 222                                 reg = <0x190000 0x660000>;
 223                         };
 224
 225                         partition@7f0000 {
 226                                 label = "dtb";
 227                                 reg = <0x7f0000 0x10000>;
 228                         };
 229                 };
 230         };
 231
 232         moxtet: moxtet@1 {
 233                 #address-cells = <1>;
 234                 #size-cells = <0>;
 235                 compatible = "cznic,moxtet";
 236                 reg = <1>;
 237                 reset-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
 238                 spi-max-frequency = <10000000>;
 239                 spi-cpol;
 240                 spi-cpha;
 241                 interrupt-controller;
 242                 #interrupt-cells = <1>;
 243                 interrupt-parent = <&gpiosb>;
 244                 interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 245                 status = "okay";
 246
 247                 moxtet_sfp: gpio@0 {
 248                         compatible = "cznic,moxtet-gpio";
 249                         gpio-controller;
 250                         #gpio-cells = <2>;
 251                         reg = <0>;
 252                         status = "disabled";
 253                 };
 254         };
 255 };
 256
 257 &usb2 {
 258         status = "okay";
 259 };
 260
 261 &comphy2 {
 262         connector {
 263                 compatible = "usb-a-connector";
 264                 phy-supply = <&exp_usb3_vbus>;
 265         };
 266 };
 267
 268 &usb3 {
 269         status = "okay";
 270         phys = <&comphy2 0>;
 271 };
 272
 273 &mdio {
 274         pinctrl-names = "default";
 275         pinctrl-0 = <&smi_pins>;
 276         status = "okay";
 277
 278         phy1: ethernet-phy@1 {
 279                 reg = <1>;
 280         };
 281
 282         /* switch nodes are enabled by U-Boot if modules are present */
 283         switch0@10 {
 284                 compatible = "marvell,mv88e6190";
 285                 reg = <0x10 0>;
 286                 dsa,member = <0 0>;
 287                 interrupt-parent = <&moxtet>;
 288                 interrupts = <MOXTET_IRQ_PERIDOT(0)>;
 289                 status = "disabled";
 290
 291                 mdio {
 292                         #address-cells = <1>;
 293                         #size-cells = <0>;
 294
 295                         switch0phy1: switch0phy1@1 {
 296                                 reg = <0x1>;
 297                         };
 298
 299                         switch0phy2: switch0phy2@2 {
 300                                 reg = <0x2>;
 301                         };
 302
 303                         switch0phy3: switch0phy3@3 {
 304                                 reg = <0x3>;
 305                         };
 306
 307                         switch0phy4: switch0phy4@4 {
 308                                 reg = <0x4>;
 309                         };
 310
 311                         switch0phy5: switch0phy5@5 {
 312                                 reg = <0x5>;
 313                         };
 314
 315                         switch0phy6: switch0phy6@6 {
 316                                 reg = <0x6>;
 317                         };
 318
 319                         switch0phy7: switch0phy7@7 {
 320                                 reg = <0x7>;
 321                         };
 322
 323                         switch0phy8: switch0phy8@8 {
 324                                 reg = <0x8>;
 325                         };
 326                 };
 327
 328                 ports {
 329                         #address-cells = <1>;
 330                         #size-cells = <0>;
 331
 332                         port@1 {
 333                                 reg = <0x1>;
 334                                 label = "lan1";
 335                                 phy-handle = <&switch0phy1>;
 336                         };
 337
 338                         port@2 {
 339                                 reg = <0x2>;
 340                                 label = "lan2";
 341                                 phy-handle = <&switch0phy2>;
 342                         };
 343
 344                         port@3 {
 345                                 reg = <0x3>;
 346                                 label = "lan3";
 347                                 phy-handle = <&switch0phy3>;
 348                         };
 349
 350                         port@4 {
 351                                 reg = <0x4>;
 352                                 label = "lan4";
 353                                 phy-handle = <&switch0phy4>;
 354                         };
 355
 356                         port@5 {
 357                                 reg = <0x5>;
 358                                 label = "lan5";
 359                                 phy-handle = <&switch0phy5>;
 360                         };
 361
 362                         port@6 {
 363                                 reg = <0x6>;
 364                                 label = "lan6";
 365                                 phy-handle = <&switch0phy6>;
 366                         };
 367
 368                         port@7 {
 369                                 reg = <0x7>;
 370                                 label = "lan7";
 371                                 phy-handle = <&switch0phy7>;
 372                         };
 373
 374                         port@8 {
 375                                 reg = <0x8>;
 376                                 label = "lan8";
 377                                 phy-handle = <&switch0phy8>;
 378                         };
 379
 380                         port@9 {
 381                                 reg = <0x9>;
 382                                 label = "cpu";
 383                                 ethernet = <&eth1>;
 384                                 phy-mode = "2500base-x";
 385                                 managed = "in-band-status";
 386                         };
 387
 388                         switch0port10: port@a {
 389                                 reg = <0xa>;
 390                                 label = "dsa";
 391                                 phy-mode = "2500base-x";
 392                                 managed = "in-band-status";
 393                                 link = <&switch1port9 &switch2port9>;
 394                                 status = "disabled";
 395                         };
 396
 397                         port-sfp@a {
 398                                 reg = <0xa>;
 399                                 label = "sfp";
 400                                 sfp = <&sfp>;
 401                                 phy-mode = "sgmii";
 402                                 managed = "in-band-status";
 403                                 status = "disabled";
 404                         };
 405                 };
 406         };
 407
 408         switch0@2 {
 409                 compatible = "marvell,mv88e6085";
 410                 reg = <0x2 0>;
 411                 dsa,member = <0 0>;
 412                 interrupt-parent = <&moxtet>;
 413                 interrupts = <MOXTET_IRQ_TOPAZ>;
 414                 status = "disabled";
 415
 416                 mdio {
 417                         #address-cells = <1>;
 418                         #size-cells = <0>;
 419
 420                         switch0phy1_topaz: switch0phy1@11 {
 421                                 reg = <0x11>;
 422                         };
 423
 424                         switch0phy2_topaz: switch0phy2@12 {
 425                                 reg = <0x12>;
 426                         };
 427
 428                         switch0phy3_topaz: switch0phy3@13 {
 429                                 reg = <0x13>;
 430                         };
 431
 432                         switch0phy4_topaz: switch0phy4@14 {
 433                                 reg = <0x14>;
 434                         };
 435                 };
 436
 437                 ports {
 438                         #address-cells = <1>;
 439                         #size-cells = <0>;
 440
 441                         port@1 {
 442                                 reg = <0x1>;
 443                                 label = "lan1";
 444                                 phy-handle = <&switch0phy1_topaz>;
 445                         };
 446
 447                         port@2 {
 448                                 reg = <0x2>;
 449                                 label = "lan2";
 450                                 phy-handle = <&switch0phy2_topaz>;
 451                         };
 452
 453                         port@3 {
 454                                 reg = <0x3>;
 455                                 label = "lan3";
 456                                 phy-handle = <&switch0phy3_topaz>;
 457                         };
 458
 459                         port@4 {
 460                                 reg = <0x4>;
 461                                 label = "lan4";
 462                                 phy-handle = <&switch0phy4_topaz>;
 463                         };
 464
 465                         port@5 {
 466                                 reg = <0x5>;
 467                                 label = "cpu";
 468                                 phy-mode = "2500base-x";
 469                                 managed = "in-band-status";
 470                                 ethernet = <&eth1>;
 471                         };
 472                 };
 473         };
 474
 475         switch1@11 {
 476                 compatible = "marvell,mv88e6190";
 477                 reg = <0x11 0>;
 478                 dsa,member = <0 1>;
 479                 interrupt-parent = <&moxtet>;
 480                 interrupts = <MOXTET_IRQ_PERIDOT(1)>;
 481                 status = "disabled";
 482
 483                 mdio {
 484                         #address-cells = <1>;
 485                         #size-cells = <0>;
 486
 487                         switch1phy1: switch1phy1@1 {
 488                                 reg = <0x1>;
 489                         };
 490
 491                         switch1phy2: switch1phy2@2 {
 492                                 reg = <0x2>;
 493                         };
 494
 495                         switch1phy3: switch1phy3@3 {
 496                                 reg = <0x3>;
 497                         };
 498
 499                         switch1phy4: switch1phy4@4 {
 500                                 reg = <0x4>;
 501                         };
 502
 503                         switch1phy5: switch1phy5@5 {
 504                                 reg = <0x5>;
 505                         };
 506
 507                         switch1phy6: switch1phy6@6 {
 508                                 reg = <0x6>;
 509                         };
 510
 511                         switch1phy7: switch1phy7@7 {
 512                                 reg = <0x7>;
 513                         };
 514
 515                         switch1phy8: switch1phy8@8 {
 516                                 reg = <0x8>;
 517                         };
 518                 };
 519
 520                 ports {
 521                         #address-cells = <1>;
 522                         #size-cells = <0>;
 523
 524                         port@1 {
 525                                 reg = <0x1>;
 526                                 label = "lan9";
 527                                 phy-handle = <&switch1phy1>;
 528                         };
 529
 530                         port@2 {
 531                                 reg = <0x2>;
 532                                 label = "lan10";
 533                                 phy-handle = <&switch1phy2>;
 534                         };
 535
 536                         port@3 {
 537                                 reg = <0x3>;
 538                                 label = "lan11";
 539                                 phy-handle = <&switch1phy3>;
 540                         };
 541
 542                         port@4 {
 543                                 reg = <0x4>;
 544                                 label = "lan12";
 545                                 phy-handle = <&switch1phy4>;
 546                         };
 547
 548                         port@5 {
 549                                 reg = <0x5>;
 550                                 label = "lan13";
 551                                 phy-handle = <&switch1phy5>;
 552                         };
 553
 554                         port@6 {
 555                                 reg = <0x6>;
 556                                 label = "lan14";
 557                                 phy-handle = <&switch1phy6>;
 558                         };
 559
 560                         port@7 {
 561                                 reg = <0x7>;
 562                                 label = "lan15";
 563                                 phy-handle = <&switch1phy7>;
 564                         };
 565
 566                         port@8 {
 567                                 reg = <0x8>;
 568                                 label = "lan16";
 569                                 phy-handle = <&switch1phy8>;
 570                         };
 571
 572                         switch1port9: port@9 {
 573                                 reg = <0x9>;
 574                                 label = "dsa";
 575                                 phy-mode = "2500base-x";
 576                                 managed = "in-band-status";
 577                                 link = <&switch0port10>;
 578                         };
 579
 580                         switch1port10: port@a {
 581                                 reg = <0xa>;
 582                                 label = "dsa";
 583                                 phy-mode = "2500base-x";
 584                                 managed = "in-band-status";
 585                                 link = <&switch2port9>;
 586                                 status = "disabled";
 587                         };
 588
 589                         port-sfp@a {
 590                                 reg = <0xa>;
 591                                 label = "sfp";
 592                                 sfp = <&sfp>;
 593                                 phy-mode = "sgmii";
 594                                 managed = "in-band-status";
 595                                 status = "disabled";
 596                         };
 597                 };
 598         };
 599
 600         switch1@2 {
 601                 compatible = "marvell,mv88e6085";
 602                 reg = <0x2 0>;
 603                 dsa,member = <0 1>;
 604                 interrupt-parent = <&moxtet>;
 605                 interrupts = <MOXTET_IRQ_TOPAZ>;
 606                 status = "disabled";
 607
 608                 mdio {
 609                         #address-cells = <1>;
 610                         #size-cells = <0>;
 611
 612                         switch1phy1_topaz: switch1phy1@11 {
 613                                 reg = <0x11>;
 614                         };
 615
 616                         switch1phy2_topaz: switch1phy2@12 {
 617                                 reg = <0x12>;
 618                         };
 619
 620                         switch1phy3_topaz: switch1phy3@13 {
 621                                 reg = <0x13>;
 622                         };
 623
 624                         switch1phy4_topaz: switch1phy4@14 {
 625                                 reg = <0x14>;
 626                         };
 627                 };
 628
 629                 ports {
 630                         #address-cells = <1>;
 631                         #size-cells = <0>;
 632
 633                         port@1 {
 634                                 reg = <0x1>;
 635                                 label = "lan9";
 636                                 phy-handle = <&switch1phy1_topaz>;
 637                         };
 638
 639                         port@2 {
 640                                 reg = <0x2>;
 641                                 label = "lan10";
 642                                 phy-handle = <&switch1phy2_topaz>;
 643                         };
 644
 645                         port@3 {
 646                                 reg = <0x3>;
 647                                 label = "lan11";
 648                                 phy-handle = <&switch1phy3_topaz>;
 649                         };
 650
 651                         port@4 {
 652                                 reg = <0x4>;
 653                                 label = "lan12";
 654                                 phy-handle = <&switch1phy4_topaz>;
 655                         };
 656
 657                         port@5 {
 658                                 reg = <0x5>;
 659                                 label = "dsa";
 660                                 phy-mode = "2500base-x";
 661                                 managed = "in-band-status";
 662                                 link = <&switch0port10>;
 663                         };
 664                 };
 665         };
 666
 667         switch2@12 {
 668                 compatible = "marvell,mv88e6190";
 669                 reg = <0x12 0>;
 670                 dsa,member = <0 2>;
 671                 interrupt-parent = <&moxtet>;
 672                 interrupts = <MOXTET_IRQ_PERIDOT(2)>;
 673                 status = "disabled";
 674
 675                 mdio {
 676                         #address-cells = <1>;
 677                         #size-cells = <0>;
 678
 679                         switch2phy1: switch2phy1@1 {
 680                                 reg = <0x1>;
 681                         };
 682
 683                         switch2phy2: switch2phy2@2 {
 684                                 reg = <0x2>;
 685                         };
 686
 687                         switch2phy3: switch2phy3@3 {
 688                                 reg = <0x3>;
 689                         };
 690
 691                         switch2phy4: switch2phy4@4 {
 692                                 reg = <0x4>;
 693                         };
 694
 695                         switch2phy5: switch2phy5@5 {
 696                                 reg = <0x5>;
 697                         };
 698
 699                         switch2phy6: switch2phy6@6 {
 700                                 reg = <0x6>;
 701                         };
 702
 703                         switch2phy7: switch2phy7@7 {
 704                                 reg = <0x7>;
 705                         };
 706
 707                         switch2phy8: switch2phy8@8 {
 708                                 reg = <0x8>;
 709                         };
 710                 };
 711
 712                 ports {
 713                         #address-cells = <1>;
 714                         #size-cells = <0>;
 715
 716                         port@1 {
 717                                 reg = <0x1>;
 718                                 label = "lan17";
 719                                 phy-handle = <&switch2phy1>;
 720                         };
 721
 722                         port@2 {
 723                                 reg = <0x2>;
 724                                 label = "lan18";
 725                                 phy-handle = <&switch2phy2>;
 726                         };
 727
 728                         port@3 {
 729                                 reg = <0x3>;
 730                                 label = "lan19";
 731                                 phy-handle = <&switch2phy3>;
 732                         };
 733
 734                         port@4 {
 735                                 reg = <0x4>;
 736                                 label = "lan20";
 737                                 phy-handle = <&switch2phy4>;
 738                         };
 739
 740                         port@5 {
 741                                 reg = <0x5>;
 742                                 label = "lan21";
 743                                 phy-handle = <&switch2phy5>;
 744                         };
 745
 746                         port@6 {
 747                                 reg = <0x6>;
 748                                 label = "lan22";
 749                                 phy-handle = <&switch2phy6>;
 750                         };
 751
 752                         port@7 {
 753                                 reg = <0x7>;
 754                                 label = "lan23";
 755                                 phy-handle = <&switch2phy7>;
 756                         };
 757
 758                         port@8 {
 759                                 reg = <0x8>;
 760                                 label = "lan24";
 761                                 phy-handle = <&switch2phy8>;
 762                         };
 763
 764                         switch2port9: port@9 {
 765                                 reg = <0x9>;
 766                                 label = "dsa";
 767                                 phy-mode = "2500base-x";
 768                                 managed = "in-band-status";
 769                                 link = <&switch1port10 &switch0port10>;
 770                         };
 771
 772                         port-sfp@a {
 773                                 reg = <0xa>;
 774                                 label = "sfp";
 775                                 sfp = <&sfp>;
 776                                 phy-mode = "sgmii";
 777                                 managed = "in-band-status";
 778                                 status = "disabled";
 779                         };
 780                 };
 781         };
 782
 783         switch2@2 {
 784                 compatible = "marvell,mv88e6085";
 785                 reg = <0x2 0>;
 786                 dsa,member = <0 2>;
 787                 interrupt-parent = <&moxtet>;
 788                 interrupts = <MOXTET_IRQ_TOPAZ>;
 789                 status = "disabled";
 790
 791                 mdio {
 792                         #address-cells = <1>;
 793                         #size-cells = <0>;
 794
 795                         switch2phy1_topaz: switch2phy1@11 {
 796                                 reg = <0x11>;
 797                         };
 798
 799                         switch2phy2_topaz: switch2phy2@12 {
 800                                 reg = <0x12>;
 801                         };
 802
 803                         switch2phy3_topaz: switch2phy3@13 {
 804                                 reg = <0x13>;
 805                         };
 806
 807                         switch2phy4_topaz: switch2phy4@14 {
 808                                 reg = <0x14>;
 809                         };
 810                 };
 811
 812                 ports {
 813                         #address-cells = <1>;
 814                         #size-cells = <0>;
 815
 816                         port@1 {
 817                                 reg = <0x1>;
 818                                 label = "lan17";
 819                                 phy-handle = <&switch2phy1_topaz>;
 820                         };
 821
 822                         port@2 {
 823                                 reg = <0x2>;
 824                                 label = "lan18";
 825                                 phy-handle = <&switch2phy2_topaz>;
 826                         };
 827
 828                         port@3 {
 829                                 reg = <0x3>;
 830                                 label = "lan19";
 831                                 phy-handle = <&switch2phy3_topaz>;
 832                         };
 833
 834                         port@4 {
 835                                 reg = <0x4>;
 836                                 label = "lan20";
 837                                 phy-handle = <&switch2phy4_topaz>;
 838                         };
 839
 840                         port@5 {
 841                                 reg = <0x5>;
 842                                 label = "dsa";
 843                                 phy-mode = "2500base-x";
 844                                 managed = "in-band-status";
 845                                 link = <&switch1port10 &switch0port10>;
 846                         };
 847                 };
 848         };
 849 };