sys/gnu/dts/arm64/qcom/msm8916-longcheer-l8150.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2
   3 /dts-v1/;
   4
   5 #include "msm8916.dtsi"
   6 #include "pm8916.dtsi"
   7 #include <dt-bindings/gpio/gpio.h>
   8 #include <dt-bindings/input/input.h>
   9
  10 / {
  11         model = "Longcheer L8150";
  12         compatible = "longcheer,l8150", "qcom,msm8916-v1-qrd/9-v1", "qcom,msm8916";
  13
  14         aliases {
  15                 serial0 = &blsp1_uart2;
  16         };
  17
  18         chosen {
  19                 stdout-path = "serial0";
  20         };
  21
  22         reserved-memory {
  23                 // wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000
  24                 /delete-node/ wcnss@89300000;
  25
  26                 wcnss_mem: wcnss@8b600000 {
  27                         reg = <0x0 0x8b600000 0x0 0x600000>;
  28                         no-map;
  29                 };
  30         };
  31
  32         soc {
  33                 sdhci@7824000 {
  34                         status = "okay";
  35
  36                         vmmc-supply = <&pm8916_l8>;
  37                         vqmmc-supply = <&pm8916_l5>;
  38
  39                         pinctrl-names = "default", "sleep";
  40                         pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
  41                         pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
  42                 };
  43
  44                 sdhci@7864000 {
  45                         status = "okay";
  46
  47                         vmmc-supply = <&pm8916_l11>;
  48                         vqmmc-supply = <&pm8916_l12>;
  49
  50                         pinctrl-names = "default", "sleep";
  51                         pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
  52                         pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
  53
  54                         non-removable;
  55                 };
  56
  57                 serial@78b0000 {
  58                         status = "okay";
  59                         pinctrl-names = "default", "sleep";
  60                         pinctrl-0 = <&blsp1_uart2_default>;
  61                         pinctrl-1 = <&blsp1_uart2_sleep>;
  62                 };
  63
  64                 usb@78d9000 {
  65                         status = "okay";
  66                         dr_mode = "peripheral";
  67                         extcon = <&usb_vbus>;
  68
  69                         hnp-disable;
  70                         srp-disable;
  71                         adp-disable;
  72
  73                         ulpi {
  74                                 phy {
  75                                         extcon = <&usb_vbus>;
  76                                         v1p8-supply = <&pm8916_l7>;
  77                                         v3p3-supply = <&pm8916_l13>;
  78                                 };
  79                         };
  80                 };
  81
  82                 wcnss@a21b000 {
  83                         status = "okay";
  84                 };
  85         };
  86
  87         // FIXME: Use extcon device provided by charger driver when available
  88         usb_vbus: usb-vbus {
  89                 compatible = "linux,extcon-usb-gpio";
  90                 vbus-gpio = <&msmgpio 62 GPIO_ACTIVE_HIGH>;
  91                 pinctrl-names = "default";
  92                 pinctrl-0 = <&usb_vbus_default>;
  93         };
  94
  95         gpio-keys {
  96                 compatible = "gpio-keys";
  97
  98                 pinctrl-names = "default";
  99                 pinctrl-0 = <&gpio_keys_default>;
 100
 101                 label = "GPIO Buttons";
 102
 103                 volume-up {
 104                         label = "Volume Up";
 105                         gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
 106                         linux,code = <KEY_VOLUMEUP>;
 107                 };
 108         };
 109 };
 110
 111 &msmgpio {
 112         gpio_keys_default: gpio-keys-default {
 113                 pinmux {
 114                         function = "gpio";
 115                         pins = "gpio107";
 116                 };
 117                 pinconf {
 118                         pins = "gpio107";
 119                         drive-strength = <2>;
 120                         bias-pull-up;
 121                 };
 122         };
 123
 124         usb_vbus_default: usb-vbus-default {
 125                 pinmux {
 126                         function = "gpio";
 127                         pins = "gpio62";
 128                 };
 129                 pinconf {
 130                         pins = "gpio62";
 131                         bias-pull-up;
 132                 };
 133         };
 134 };
 135
 136 &spmi_bus {
 137         pm8916@0 {
 138                 pon@800 {
 139                         volume-down {
 140                                 compatible = "qcom,pm8941-resin";
 141                                 interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
 142                                 bias-pull-up;
 143                                 linux,code = <KEY_VOLUMEDOWN>;
 144                         };
 145                 };
 146         };
 147 };
 148
 149 &smd_rpm_regulators {
 150         vdd_l1_l2_l3-supply = <&pm8916_s3>;
 151         vdd_l4_l5_l6-supply = <&pm8916_s4>;
 152         vdd_l7-supply = <&pm8916_s4>;
 153
 154         s1 {
 155                 regulator-min-microvolt = <500000>;
 156                 regulator-max-microvolt = <1300000>;
 157         };
 158
 159         s3 {
 160                 regulator-min-microvolt = <1200000>;
 161                 regulator-max-microvolt = <1300000>;
 162         };
 163
 164         s4 {
 165                 regulator-min-microvolt = <1800000>;
 166                 regulator-max-microvolt = <2100000>;
 167         };
 168
 169         l1 {
 170                 regulator-min-microvolt = <1225000>;
 171                 regulator-max-microvolt = <1225000>;
 172         };
 173
 174         l2 {
 175                 regulator-min-microvolt = <1200000>;
 176                 regulator-max-microvolt = <1200000>;
 177         };
 178
 179         l3 {
 180                 regulator-min-microvolt = <500000>;
 181                 regulator-max-microvolt = <1287500>;
 182         };
 183
 184         l4 {
 185                 regulator-min-microvolt = <2050000>;
 186                 regulator-max-microvolt = <2050000>;
 187         };
 188
 189         l5 {
 190                 regulator-min-microvolt = <1800000>;
 191                 regulator-max-microvolt = <1800000>;
 192         };
 193
 194         l6 {
 195                 regulator-min-microvolt = <1800000>;
 196                 regulator-max-microvolt = <1800000>;
 197         };
 198
 199         l7 {
 200                 regulator-min-microvolt = <1800000>;
 201                 regulator-max-microvolt = <1800000>;
 202         };
 203
 204         l8 {
 205                 regulator-min-microvolt = <2850000>;
 206                 regulator-max-microvolt = <2900000>;
 207         };
 208
 209         l9 {
 210                 regulator-min-microvolt = <3300000>;
 211                 regulator-max-microvolt = <3300000>;
 212         };
 213
 214         l10 {
 215                 regulator-min-microvolt = <2700000>;
 216                 regulator-max-microvolt = <2800000>;
 217         };
 218
 219         l11 {
 220                 regulator-min-microvolt = <1800000>;
 221                 regulator-max-microvolt = <2950000>;
 222                 regulator-allow-set-load;
 223                 regulator-system-load = <200000>;
 224         };
 225
 226         l12 {
 227                 regulator-min-microvolt = <1800000>;
 228                 regulator-max-microvolt = <2950000>;
 229         };
 230
 231         l13 {
 232                 regulator-min-microvolt = <3075000>;
 233                 regulator-max-microvolt = <3075000>;
 234         };
 235
 236         l14 {
 237                 regulator-min-microvolt = <1800000>;
 238                 regulator-max-microvolt = <3300000>;
 239         };
 240
 241         l15 {
 242                 regulator-min-microvolt = <1800000>;
 243                 regulator-max-microvolt = <3300000>;
 244         };
 245
 246         l16 {
 247                 regulator-min-microvolt = <1800000>;
 248                 regulator-max-microvolt = <3300000>;
 249         };
 250
 251         l17 {
 252                 regulator-min-microvolt = <2850000>;
 253                 regulator-max-microvolt = <2850000>;
 254         };
 255
 256         l18 {
 257                 regulator-min-microvolt = <2700000>;
 258                 regulator-max-microvolt = <2700000>;
 259         };
 260 };