sys/gnu/dts/arm64/renesas/r8a774c0-ek874-mipi-2.1.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Device Tree Source for the Silicon Linux RZ/G2E 96board platform (CAT874)
   4  * connected with aistarvision-mipi-v2-adapter board
   5  *
   6  * Copyright (C) 2020 Renesas Electronics Corp.
   7  */
   8
   9 /dts-v1/;
  10 #include "r8a774c0-ek874.dts"
  11 #define MIPI_PARENT_I2C i2c3
  12 #include "aistarvision-mipi-adapter-2.1.dtsi"
  13
  14 / {
  15         model = "Silicon Linux RZ/G2E evaluation kit EK874 (CAT874 + CAT875) with aistarvision-mipi-v2-adapter board";
  16         compatible = "si-linux,cat875", "si-linux,cat874", "renesas,r8a774c0";
  17 };
  18
  19 &i2c3 {
  20         status = "okay";
  21 };
  22
  23 &vin4 {
  24         status = "okay";
  25 };
  26
  27 &vin5 {
  28         status = "okay";
  29 };
  30
  31 &csi40 {
  32         status = "okay";
  33
  34         ports {
  35                 port {
  36                         csi40_in: endpoint {
  37                                 clock-lanes = <0>;
  38                                 data-lanes = <1 2>;
  39                                 remote-endpoint = <&ov5645_ep>;
  40                         };
  41                 };
  42         };
  43 };
  44
  45 &ov5645 {
  46         enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
  47         reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
  48
  49         port {
  50                 ov5645_ep: endpoint {
  51                         clock-lanes = <0>;
  52                         data-lanes = <1 2>;
  53                         remote-endpoint = <&csi40_in>;
  54                 };
  55         };
  56 };
  57
  58 &imx219 {
  59         port {
  60                 imx219_ep: endpoint {
  61                         clock-lanes = <0>;
  62                         data-lanes = <1 2>;
  63                         link-frequencies = /bits/ 64 <456000000>;
  64                         /* uncomment remote-endpoint property to tie imx219 to
  65                          * CSI2 also make sure remote-endpoint for ov5645 camera
  66                          * is commented and remote endpoint phandle in csi40_in
  67                          * is imx219_ep
  68                          */
  69                         /* remote-endpoint = <&csi40_in>; */
  70                 };
  71         };
  72 };