sys/gnu/dts/mips/AIR3GII.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 / {
   6         compatible = "AIR3GII", "ralink,rt5350-soc";
   7         model = "AirLive Air3GII";
   8
   9         gpio-leds {
  10                 compatible = "gpio-leds";
  11
  12                 wlan {
  13                         label = "air3gii:green:wlan";
  14                         gpios = <&gpio0 8 0>;
  15                 };
  16
  17                 mobile {
  18                         label = "air3gii:green:mobile";
  19                         gpios = <&gpio0 9 1>;
  20                 };
  21         };
  22
  23         gpio-keys-polled {
  24                 compatible = "gpio-keys-polled";
  25                 #address-cells = <1>;
  26                 #size-cells = <0>;
  27                 poll-interval = <20>;
  28
  29                 wps {
  30                         label = "wps";
  31                         gpios = <&gpio0 7 1>;
  32                         linux,code = <0x211>;
  33                 };
  34         };
  35 };
  36
  37 &gpio0 {
  38         status = "okay";
  39 };
  40
  41 &spi0 {
  42         status = "okay";
  43
  44         m25p80@0 {
  45                 #address-cells = <1>;
  46                 #size-cells = <1>;
  47                 compatible = "jedec,spi-nor";
  48                 reg = <0>;
  49                 linux,modalias = "m25p80", "en25q32b";
  50                 spi-max-frequency = <10000000>;
  51
  52                 partition@0 {
  53                         label = "u-boot";
  54                         reg = <0x0 0x30000>;
  55                         read-only;
  56                 };
  57
  58                 partition@30000 {
  59                         label = "u-boot-env";
  60                         reg = <0x30000 0x10000>;
  61                         read-only;
  62                 };
  63
  64                 factory: partition@40000 {
  65                         label = "factory";
  66                         reg = <0x40000 0x10000>;
  67                         read-only;
  68                 };
  69
  70                 partition@50000 {
  71                         label = "firmware";
  72                         reg = <0x50000 0x3b0000>;
  73                 };
  74         };
  75 };
  76
  77 &pinctrl {
  78         state_default: pinctrl0 {
  79                 gpio {
  80                         ralink,group = "i2c", "jtag", "uartf";
  81                         ralink,function = "gpio";
  82                 };
  83         };
  84 };
  85
  86 &ethernet {
  87         mtd-mac-address = <&factory 0x4>;
  88 };
  89
  90 &esw {
  91         mediatek,portmap = <0x2f>;
  92 };
  93
  94 &wmac {
  95         ralink,mtd-eeprom = <&factory 0>;
  96 };