sys/gnu/dts/mips/AR725W.dts

   1 /dts-v1/;
   2
   3 #include "rt2880.dtsi"
   4
   5 / {
   6         compatible = "AR725W", "ralink,rt2880-soc";
   7         model = "Airlink101 AR725W";
   8
   9         cfi@bdc00000 {
  10                 compatible = "cfi-flash";
  11                 reg = <0xbc400000 0x800000>;
  12                 bank-width = <2>;
  13                 #address-cells = <1>;
  14                 #size-cells = <1>;
  15
  16                 u-boot@0 {
  17                         reg = <0x0 0x30000>;
  18                         label = "u-boot";
  19                         read-only;
  20                 };
  21
  22                 u-boot-env@30000 {
  23                         reg = <0x30000 0x10000>;
  24                         label = "u-boot-env";
  25                 };
  26
  27                 factory: factory@40000 {
  28                         reg = <0x40000 0x10000>;
  29                         label = "factory";
  30                         read-only;
  31                 };
  32
  33                 firmware@50000 {
  34                         reg = <0x50000 0x3B0000>;
  35                         label = "firmware";
  36                 };
  37         };
  38
  39         gpio-leds {
  40                 compatible = "gpio-leds";
  41
  42                 status {
  43                         label = "ar725w:green:power";
  44                         gpios = <&gpio0 7 0>;
  45                 };
  46
  47                 wpsred {
  48                         label = "ar725w:red:wps";
  49                         gpios = <&gpio0 8 1>;
  50                 };
  51
  52                 wpsblue {
  53                         label = "ar725w:blue:wps";
  54                         gpios = <&gpio0 13 1>;
  55                 };
  56         };
  57
  58         gpio-keys-polled {
  59                 compatible = "gpio-keys-polled";
  60                 #address-cells = <1>;
  61                 #size-cells = <0>;
  62                 poll-interval = <100>;
  63
  64                 wps {
  65                         label = "wps";
  66                         gpios = <&gpio0 0 1>;
  67                         linux,code = <0x211>;
  68                 };
  69
  70                 reset {
  71                         label = "reset";
  72                         gpios = <&gpio0 9 1>;
  73                         linux,code = <0x198>;
  74                 };
  75         };
  76 };
  77
  78 &gpio0 {
  79         status = "okay";
  80 };
  81
  82 &pinctrl {
  83         state_default: pinctrl0 {
  84                 gpio {
  85                         ralink,group = "i2c", "spi", "uartlite";
  86                         ralink,function = "gpio";
  87                 };
  88         };
  89 };
  90
  91 &ethernet {
  92         status = "okay";
  93         mtd-mac-address = <&factory 0x4>;
  94
  95         port@0 {
  96                 phy-handle = <&phy0>;
  97                 phy-mode = "mii";
  98         };
  99
 100         mdio-bus {
 101                 status = "okay";
 102
 103                 phy0: ethernet-phy@0 {
 104                         phy-mode = "mii";
 105                         reg = <0>;
 106                 };
 107         };
 108 };
 109
 110 &wmac {
 111         status = "okay";
 112         ralink,mtd-eeprom = <&factory 0>;
 113 };