sys/gnu/dts/mips/ATP-52B.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "ATP-52B", "ralink,rt3052-soc";
   7         model = "Argus ATP-52B";
   8
   9         cfi@1f000000 {
  10                 compatible = "cfi-flash";
  11                 reg = <0x1f000000 0x800000>;
  12                 bank-width = <2>;
  13                 device-width = <2>;
  14                 #address-cells = <1>;
  15                 #size-cells = <1>;
  16
  17                 partition@0 {
  18                         label = "bootloader";
  19                         reg = <0x0 0x30000>;
  20                         read-only;
  21                 };
  22
  23                 partition@30000 {
  24                         label = "config";
  25                         reg = <0x30000 0x10000>;
  26                 };
  27
  28                 factory: partition@40000 {
  29                         label = "factory";
  30                         reg = <0x40000 0x10000>;
  31                 };
  32
  33                 partition@50000 {
  34                         label = "firmware";
  35                         reg = <0x50000 0x7a0000>;
  36                 };
  37         };
  38
  39         gpio-leds {
  40                 compatible = "gpio-leds";
  41
  42                 run {
  43                         label = "atp-52b:green:run";
  44                         gpios = <&gpio0 9 1>;
  45                 };
  46
  47                 net {
  48                         label = "atp-52b:amber:net";
  49                         gpios = <&gpio0 13 1>;
  50                 };
  51         };
  52
  53         gpio-keys-polled {
  54                 compatible = "gpio-keys-polled";
  55                 #address-cells = <1>;
  56                 #size-cells = <0>;
  57                 poll-interval = <20>;
  58
  59                 wps {
  60                         label = "wps";
  61                         gpios = <&gpio0 0 1>;
  62                         linux,code = <0x211>;
  63                 };
  64
  65                 reset {
  66                         label = "reset";
  67                         gpios = <&gpio0 10 1>;
  68                         linux,code = <0x198>;
  69                 };
  70         };
  71 };
  72
  73 &pinctrl {
  74         state_default: pinctrl0 {
  75                 gpio {
  76                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  77                         ralink,function = "gpio";
  78                 };
  79         };
  80 };
  81
  82
  83 &ethernet {
  84         mtd-mac-address = <&factory 0x4>;
  85 };
  86
  87 &esw {
  88         mediatek,portmap = <0x3e>;
  89 };
  90
  91 &wmac {
  92         ralink,mtd-eeprom = <&factory 0>;
  93 };
  94
  95 &otg {
  96         status = "okay";
  97 };