sys/gnu/dts/mips/CF-WR800N.dts

   1 /dts-v1/;
   2
   3 #include "mt7620n.dtsi"
   4
   5 / {
   6         compatible = "cf-wr800n", "ralink,mt7620n-soc";
   7         model = "Comfast CF-WR800N";
   8
   9         chosen {
  10                 bootargs = "console=ttyS0,115200";
  11         };
  12
  13         gpio-leds {
  14                 compatible = "gpio-leds";
  15
  16                 ethernet {
  17                         label = "cf-wr800n:white:ethernet";
  18                         gpios = <&gpio2 4 1>;
  19                 };
  20
  21                 wifi {
  22                         label = "cf-wr800n:white:wifi";
  23                         gpios = <&gpio3 0 1>;
  24                 };
  25
  26                 wps {
  27                         label = "cf-wr800n:white:wps";
  28                         gpios = <&gpio1 15 1>;
  29                 };
  30         };
  31
  32         gpio-keys-polled {
  33                 compatible = "gpio-keys-polled";
  34                 #address-cells = <1>;
  35                 #size-cells = <0>;
  36                 poll-interval = <20>;
  37
  38                 reset {
  39                         label = "reset";
  40                         gpios = <&gpio0 2 1>;
  41                         linux,code = <0x198>;
  42                 };
  43         };
  44 };
  45
  46 &gpio0 {
  47         status = "okay";
  48 };
  49
  50 &gpio1 {
  51         status = "okay";
  52 };
  53
  54 &gpio2 {
  55         status = "okay";
  56 };
  57
  58 &gpio3 {
  59         status = "okay";
  60 };
  61
  62 &spi0 {
  63         status = "okay";
  64
  65         m25p80@0 {
  66                 #address-cells = <1>;
  67                 #size-cells = <1>;
  68                 compatible = "jedec,spi-nor";
  69                 reg = <0>;
  70                 linux,modalias = "m25p80", "w25q64";
  71                 spi-max-frequency = <10000000>;
  72
  73                 partition@0 {
  74                         label = "u-boot";
  75                         reg = <0x0 0x30000>;
  76                         read-only;
  77                 };
  78
  79                 partition@30000 {
  80                         label = "u-boot-env";
  81                         reg = <0x30000 0x10000>;
  82                         read-only;
  83                 };
  84
  85                 factory: partition@40000 {
  86                         label = "factory";
  87                         reg = <0x40000 0x10000>;
  88                         read-only;
  89                 };
  90
  91                 partition@50000 {
  92                         label = "firmware";
  93                         reg = <0x50000 0x7b0000>;
  94                 };
  95         };
  96 };
  97
  98 &ethernet {
  99         mtd-mac-address = <&factory 0x4>;
 100 };
 101
 102 &wmac {
 103         ralink,mtd-eeprom = <&factory 0>;
 104 };
 105
 106 &pinctrl {
 107         state_default: pinctrl0 {
 108                 default {
 109                         ralink,group = "ephy", "wled", "spi refclk", "i2c";
 110                         ralink,function = "gpio";
 111                 };
 112         };
 113 };