sys/gnu/dts/mips/CY-SWR1100.dts

   1 /dts-v1/;
   2
   3 #include "rt3883.dtsi"
   4
   5 / {
   6         compatible = "CY-SWR1100", "ralink,rt3883-soc";
   7         model = "Samsung CY-SWR1100";
   8
   9         nor-flash@1c000000 {
  10                 compatible = "cfi-flash";
  11                 reg = <0x1c000000 0x800000>;
  12                 bank-width = <2>;
  13                 #address-cells = <1>;
  14                 #size-cells = <1>;
  15
  16                 partition@0 {
  17                         label = "uboot";
  18                         reg = <0x0 0x30000>;
  19                         read-only;
  20                 };
  21
  22                 partition@30000 {
  23                         label = "uboot-env";
  24                         reg = <0x30000 0x4000>;
  25                         read-only;
  26                 };
  27
  28                 factory: partition@34000 {
  29                         label = "factory";
  30                         reg = <0x34000 0x4000>;
  31                         read-only;
  32                 };
  33
  34                 partition@38000 {
  35                         label = "nvram";
  36                         reg = <0x38000 0x8000>;
  37                         read-only;
  38                 };
  39
  40                 partition@40000 {
  41                         label = "devdata";
  42                         reg = <0x40000 0x10000>;
  43                 };
  44
  45                 partition@50000 {
  46                         label = "firmware";
  47                         reg = <0x50000 0x7b0000>;
  48                 };
  49         };
  50
  51         rtl8367 {
  52                 compatible = "realtek,rtl8367";
  53                 gpio-sda = <&gpio0 1 0>;
  54                 gpio-sck = <&gpio0 2 0>;
  55                 realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
  56         };
  57
  58         gpio-keys-polled {
  59                 compatible = "gpio-keys-polled";
  60                 #address-cells = <1>;
  61                 #size-cells = <0>;
  62                 poll-interval = <100>;
  63
  64                 reset {
  65                         label = "reset";
  66                         gpios = <&gpio0 6 1>;
  67                         linux,code = <0x198>;
  68                 };
  69
  70                 wps {
  71                         label = "wps";
  72                         gpios = <&gpio0 3 1>;
  73                         linux,code = <0x211>;
  74                 };
  75         };
  76
  77         gpio-leds {
  78                 compatible = "gpio-leds";
  79
  80                 wps {
  81                         label = "cy-swr1100:blue:wps";
  82                         gpios = <&gpio0 0 1>;
  83                 };
  84
  85                 usb {
  86                         label = "cy-swr1100:blue:usb";
  87                         gpios = <&gpio1 1 1>;
  88                 };
  89         };
  90 };
  91
  92 &gpio1 {
  93         status = "okay";
  94 };
  95
  96 &pinctrl {
  97         state_default: pinctrl0 {
  98                 gpio {
  99                         ralink,group = "i2c", "spi";
 100                         ralink,function = "gpio";
 101                 };
 102         };
 103 };
 104
 105 &ethernet {
 106         port@0 {
 107                 mediatek,fixed-link = <1000 1 1 1>;
 108                 phy-mode = "rgmii";
 109         };
 110 };
 111
 112 &pci {
 113         status = "okay";
 114         pinctrl-names = "default";
 115         pinctrl-0 = <&pci_pins>;
 116
 117         pci_pins: pci {
 118                 pci {
 119                         ralink,group = "pci";
 120                         ralink,function = "pci-fnc";
 121                 };
 122         };
 123
 124         host-bridge {
 125                 pci-bridge@1 {
 126                         status = "okay";
 127
 128                         wmac@0,0 {
 129                                 ralink,5ghz = <0>;
 130                                 compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
 131                                 reg = < 0x10000 0 0 0 0 >;
 132                                 ralink,eeprom = "rt2x00pci_1_0.eeprom";
 133                         };
 134                 };
 135         };
 136 };
 137
 138 &wmac {
 139         status = "okay";
 140         ralink,2ghz = <0>;
 141         ralink,mtd-eeprom = <&factory 0>;
 142 };
 143
 144 &ehci {
 145         status = "okay";
 146 };
 147
 148 &ohci {
 149         status = "okay";
 150 };