sys/gnu/dts/mips/DIR-860L-B1.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
   7         model = "D-Link DIR-860L B1";
   8
   9         memory@0 {
  10                 device_type = "memory";
  11                 reg = <0x0 0x8000000>;
  12         };
  13
  14         chosen {
  15                 bootargs = "console=ttyS0,57600";
  16         };
  17
  18         gpio-leds {
  19                 compatible = "gpio-leds";
  20
  21                 power {
  22                         label = "dir-860l-b1:orange:power";
  23                         gpios = <&gpio0 13 1>;
  24                 };
  25
  26                 power2 {
  27                         label = "dir-860l-b1:green:power";
  28                         gpios = <&gpio0 15 1>;
  29                 };
  30
  31                 net {
  32                         label = "dir-860l-b1:orange:net";
  33                         gpios = <&gpio0 14 1>;
  34                 };
  35
  36                 net2 {
  37                         label = "dir-860l-b1:green:net";
  38                         gpios = <&gpio0 16 1>;
  39                 };
  40         };
  41
  42         gpio-keys-polled {
  43                 compatible = "gpio-keys-polled";
  44                 #address-cells = <1>;
  45                 #size-cells = <0>;
  46                 poll-interval = <20>;
  47         };
  48 };
  49
  50 &spi0 {
  51         status = "okay";
  52
  53         m25p80@0 {
  54                 #address-cells = <1>;
  55                 #size-cells = <1>;
  56                 compatible = "jedec,spi-nor";
  57                 reg = <0>;
  58                 linux,modalias = "m25p80";
  59                 spi-max-frequency = <10000000>;
  60
  61                 partition@0 {
  62                         label = "u-boot";
  63                         reg = <0x0 0x30000>;
  64                         read-only;
  65                 };
  66
  67                 partition@30000 {
  68                         label = "u-boot-env";
  69                         reg = <0x30000 0x4000>;
  70                         read-only;
  71                 };
  72
  73                 radio: partition@34000 {
  74                         label = "radio";
  75                         reg = <0x34000 0x4000>;
  76                         read-only;
  77                 };
  78
  79                 factory: partition@38000 {
  80                         label = "factory";
  81                         reg = <0x38000 0x8000>;
  82                         read-only;
  83                 };
  84
  85                 partition@40000 {
  86                         label = "defaults";
  87                         reg = <0x40000 0x10000>;
  88                         read-only;
  89                 };
  90
  91                 partition@50000 {
  92                         label = "firmware";
  93                         reg = <0x50000 0xfb0000>;
  94                 };
  95         };
  96 };
  97
  98 &pcie {
  99         status = "okay";
 100
 101         pcie0 {
 102                 mt76@0,0 {
 103                         reg = <0x0000 0 0 0 0>;
 104                         device_type = "pci";
 105                         mediatek,mtd-eeprom = <&radio 0x2000>;
 106                         mediatek,2ghz = <0>;
 107                 };
 108         };
 109
 110         pcie1 {
 111                 mt76@1,0 {
 112                         reg = <0x0000 0 0 0 0>;
 113                         device_type = "pci";
 114                         mediatek,mtd-eeprom = <&radio 0>;
 115                         mediatek,5ghz = <0>;
 116                 };
 117         };
 118 };
 119
 120 &pinctrl {
 121         state_default: pinctrl0 {
 122                 gpio {
 123                         ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
 124                         ralink,function = "gpio";
 125                 };
 126         };
 127 };