sys/gnu/dts/mips/F7C027.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 / {
   6         compatible = "F7C027", "ralink,rt5350-soc";
   7         model = "Belkin F7C027";
   8
   9         gpio-leds {
  10                 compatible = "gpio-leds";
  11
  12                 status {
  13                         label = "f7c027:blue:status";
  14                         gpios = <&gpio0 7 1>;
  15                 };
  16
  17                 power {
  18                         label = "f7c027:blue:power";
  19                         gpios = <&gpio0 9 1>;
  20                 };
  21
  22                 orange {
  23                         label = "f7c027:orange:status";
  24                         gpios = <&gpio0 11 1>;
  25                 };
  26
  27                 relay {
  28                         label = "f7c027:device:relay";
  29                         gpios = <&gpio0 13 0>;
  30                 };
  31         };
  32
  33         gpio-keys-polled {
  34                 compatible = "gpio-keys-polled";
  35                 #address-cells = <1>;
  36                 #size-cells = <0>;
  37                 poll-interval = <20>;
  38
  39                 top {
  40                         label = "top";
  41                         gpios = <&gpio0 10 1>;
  42                         linux,code = <0x198>;
  43                 };
  44
  45                 power {
  46                         label = "power";
  47                         gpios = <&gpio0 12 1>;
  48                         linux,code = <0x100>;
  49                 };
  50
  51                 sensor {
  52                         label = "sensor";
  53                         gpios = <&gpio0 14 1>;
  54                         linux,code = <0x101>;
  55                 };
  56         };
  57 };
  58
  59 &spi0 {
  60         status = "okay";
  61
  62         m25p80@0 {
  63                 #address-cells = <1>;
  64                 #size-cells = <1>;
  65                 compatible = "jedec,spi-nor";
  66                 reg = <0>;
  67                 linux,modalias = "m25p80", "mx25l12805d";
  68                 spi-max-frequency = <10000000>;
  69
  70                 partition@0 {
  71                         label = "u-boot";
  72                         reg = <0x0 0x30000>;
  73                         read-only;
  74                 };
  75
  76                 partition@30000 {
  77                         label = "u-boot-env";
  78                         reg = <0x30000 0x10000>;
  79                         read-only;
  80                 };
  81
  82                 factory: partition@40000 {
  83                         label = "factory";
  84                         reg = <0x40000 0x10000>;
  85                         read-only;
  86                 };
  87
  88                 partition@50000 {
  89                         label = "firmware";
  90                         reg = <0x50000 0x770000>;
  91                 };
  92
  93                 partition@7c0000 {
  94                         label = "firmware2";
  95                         reg = <0x7c0000 0x770000>;
  96                 };
  97
  98                 partition@f30000 {
  99                         label = "belkin_settings";
 100                         reg = <0xf30000 0xa0000>;
 101                 };
 102
 103                 partition@fd0000 {
 104                         label = "unknown";
 105                         reg = <0xfd0000 0x10000>;
 106                 };
 107
 108                 partition@fe0000 {
 109                         label = "nvram";
 110                         reg = <0xfe0000 0x10000>;
 111                 };
 112
 113                 partition@ff0000 {
 114                         label = "user_factory";
 115                         reg = <0xff0000 0x10000>;
 116                 };
 117         };
 118 };
 119
 120 &wmac {
 121         ralink,mtd-eeprom = <&factory 0>;
 122 };
 123
 124 &pinctrl {
 125         state_default: pinctrl0 {
 126                 gpio {
 127                         ralink,group = "i2c", "jtag", "uartf";
 128                         ralink,function = "gpio";
 129                 };
 130         };
 131 };