sys/gnu/dts/mips/JHR-N926R.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "JHR-N926R", "ralink,rt3052-soc";
   7         model = "JCG JHR-N926R";
   8
   9         cfi@1f000000 {
  10                 compatible = "cfi-flash";
  11                 reg = <0x1f000000 0x800000>;
  12                 bank-width = <2>;
  13                 device-width = <2>;
  14                 #address-cells = <1>;
  15                 #size-cells = <1>;
  16
  17                 partition@0 {
  18                         label = "u-boot";
  19                         reg = <0x0 0x30000>;
  20                         read-only;
  21                 };
  22
  23                 partition@30000 {
  24                         label = "u-boot-env";
  25                         reg = <0x30000 0x10000>;
  26                         read-only;
  27                 };
  28
  29                 factory: partition@40000 {
  30                         label = "factory";
  31                         reg = <0x40000 0x10000>;
  32                         read-only;
  33                 };
  34
  35                 partition@50000 {
  36                         label = "firmware";
  37                         reg = <0x50000 0x3b0000>;
  38                 };
  39         };
  40
  41         gpio-leds {
  42                 compatible = "gpio-leds";
  43
  44                 wlan1 {
  45                         label = "jhr-n926r:red:wlan";
  46                         gpios = <&gpio0 20 1>;
  47                 };
  48
  49                 wlan2 {
  50                         label = "jhr-n926r:yellow:wlan";
  51                         gpios = <&gpio0 19 1>;
  52                 };
  53
  54                 wlan3 {
  55                         label = "jhr-n926r:green:wlan";
  56                         gpios = <&gpio0 17 1>;
  57                 };
  58
  59                 system {
  60                         label = "jhr-n926r:blue:system";
  61                         gpios = <&gpio0 13 1>;
  62                 };
  63         };
  64
  65         gpio_export {
  66                 compatible = "gpio-export";
  67                 #size-cells = <0>;
  68
  69                 display_data {
  70                         gpio-export,name = "display_data";
  71                         gpio-export,output = <1>;
  72                         gpios = <&gpio0 7 1>;
  73                 };
  74
  75                 display_clock {
  76                         gpio-export,name = "display_clock";
  77                         gpio-export,output = <1>;
  78                         gpios = <&gpio0 8 0>;
  79                 };
  80
  81                 display_blank {
  82                         gpio-export,name = "display_blank";
  83                         gpio-export,output = <1>;
  84                         gpios = <&gpio0 11 0>;
  85                 };
  86         };
  87
  88         gpio-keys-polled {
  89                 compatible = "gpio-keys-polled";
  90                 #address-cells = <1>;
  91                 #size-cells = <0>;
  92                 poll-interval = <20>;
  93
  94                 reset_wps {
  95                         label = "reset_wps";
  96                         gpios = <&gpio0 10 1>;
  97                         linux,code = <0x198>;
  98                 };
  99
 100                 wlan {
 101                         label = "wlan";
 102                         gpios = <&gpio0 1 1>;
 103                         linux,code = <0x100>;
 104                 };
 105         };
 106 };
 107
 108 &pinctrl {
 109         state_default: pinctrl0 {
 110                 gpio {
 111                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
 112                         ralink,function = "gpio";
 113                 };
 114         };
 115 };
 116
 117 &ethernet {
 118         mtd-mac-address = <&factory 0x2e>;
 119 };
 120
 121 &esw {
 122         mediatek,portmap = <0x3e>;
 123 };
 124
 125 &wmac {
 126         ralink,mtd-eeprom = <&factory 0>;
 127 };