sys/gnu/dts/mips/MZK-EX300NP.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7620a-soc";
   7         model = "Planex MZK-EX300NP";
   8
   9         gpio-leds {
  10                 compatible = "gpio-leds";
  11
  12                 wifi {
  13                         label = "mzk-ex300np:green:wifi";
  14                         gpios = <&gpio3 0 1>;
  15                 };
  16
  17                 wps {
  18                         label = "mzk-ex300np:green:wps";
  19                         gpios = <&gpio1 5 1>;
  20                 };
  21
  22                 rep {
  23                         label = "mzk-ex300np:blue:rep";
  24                         gpios = <&gpio1 4 1>;
  25                 };
  26
  27                 wifi1 {
  28                         label = "mzk-ex300np:blue:wifi1";
  29                         gpios = <&gpio1 1 1>;
  30                 };
  31
  32                 wifi2 {
  33                         label = "mzk-ex300np:blue:wifi2";
  34                         gpios = <&gpio1 2 1>;
  35                 };
  36
  37                 wifi3 {
  38                         label = "mzk-ex300np:blue:wifi3";
  39                         gpios = <&gpio1 0 1>;
  40                 };
  41         };
  42
  43         gpio-keys-polled {
  44                 compatible = "gpio-keys-polled";
  45                 #address-cells = <1>;
  46                 #size-cells = <0>;
  47                 poll-interval = <20>;
  48
  49                 reset {
  50                         label = "reset";
  51                         gpios = <&gpio0 1 1>;
  52                         linux,code = <0x198>;
  53                 };
  54
  55                 wps {
  56                         label = "wps";
  57                         gpios = <&gpio1 3 0>;
  58                         linux,code = <0x211>;
  59                 };
  60         };
  61 };
  62
  63 &gpio1 {
  64         status = "okay";
  65 };
  66
  67 &gpio3 {
  68         status = "okay";
  69 };
  70
  71 &spi0 {
  72         status = "okay";
  73
  74         m25p80@0 {
  75                 #address-cells = <1>;
  76                 #size-cells = <1>;
  77                 compatible = "jedec,spi-nor";
  78                 reg = <0>;
  79                 linux,modalias = "m25p80", "w25q64";
  80                 spi-max-frequency = <10000000>;
  81
  82                 partition@0 {
  83                         label = "u-boot";
  84                         reg = <0x0 0x30000>;
  85                         read-only;
  86                 };
  87
  88                 partition@30000 {
  89                         label = "u-boot-env";
  90                         reg = <0x30000 0x10000>;
  91                         read-only;
  92                 };
  93
  94                 factory: partition@40000 {
  95                         label = "factory";
  96                         reg = <0x40000 0x10000>;
  97                         read-only;
  98                 };
  99
 100                 partition@50000 {
 101                         label = "firmware";
 102                         reg = <0x50000 0x730000>;
 103                 };
 104
 105                 partition@780000 {
 106                         label = "Udata";
 107                         reg = <0x780000 0x80000>;
 108                 };
 109         };
 110 };
 111
 112 &pinctrl {
 113         state_default: pinctrl0 {
 114                 gpio {
 115                         ralink,group = "i2c", "spi refclk", "rgmii1", "wled";
 116                         ralink,function = "gpio";
 117                 };
 118         };
 119 };
 120
 121 &ethernet {
 122         pinctrl-names = "default";
 123         pinctrl-0 = <&ephy_pins>;
 124         mtd-mac-address = <&factory 0x4>;
 125         mediatek,portmap = "llllw";
 126 };
 127
 128 &wmac {
 129         ralink,mtd-eeprom = <&factory 0>;
 130 };