sys/gnu/dts/mips/NA930.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
   7         model = "Sercomm NA930";
   8
   9         chosen {
  10                 bootargs = "console=ttyS1,57600";
  11         };
  12
  13         nand {
  14                 #address-cells = <1>;
  15                 #size-cells = <1>;
  16                 compatible = "mtk,mt7620-nand";
  17
  18                 partition@0 {
  19                         label = "u-boot";
  20                         reg = <0x0 0x20000>;
  21                         read-only;
  22                 };
  23
  24                 partition@200000 {
  25                         label = "factory";
  26                         reg = <0x200000 0x40000>;
  27                         read-only;
  28                 };
  29
  30                 partition@240000 {
  31                         label = "Config";
  32                         reg = <0x240000 0x400000>;
  33                         read-only;
  34                 };
  35
  36                 partition@640000 {
  37                         label = "firmware";
  38                         reg = <0x640000 0x1400000>;
  39                 };
  40         };
  41
  42         gpio-keys-polled {
  43                 compatible = "gpio-keys-polled";
  44                 #address-cells = <1>;
  45                 #size-cells = <0>;
  46                 poll-interval = <20>;
  47
  48                 reset {
  49                         label = "reset";
  50                         gpios = <&gpio0 11 1>;
  51                         linux,code = <0x198>;
  52                 };
  53
  54                 zwave {
  55                         label = "zwave";
  56                         gpios = <&gpio0 12 1>;
  57                         linux,code = <0x100>;
  58                 };
  59
  60                 wps {
  61                         label = "wps";
  62                         gpios = <&gpio0 14 1>;
  63                         linux,code = <0x211>;
  64                 };
  65         };
  66
  67         gpio-leds {
  68                 compatible = "gpio-leds";
  69
  70                 zwave {
  71                         label = "na930:blue:zwave";
  72                         gpios = <&gpio2 0 1>;
  73                 };
  74
  75                 status {
  76                         label = "na930:blue:status";
  77                         gpios = <&gpio2 26 1>;
  78                 };
  79
  80                 service {
  81                         label = "na930:blue:service";
  82                         gpios = <&gpio2 28 1>;
  83                 };
  84
  85                 power {
  86                         label = "na930:blue:power";
  87                         gpios = <&gpio2 29 1>;
  88                 };
  89         };
  90
  91         gpio_export {
  92                 compatible = "gpio-export";
  93                 #size-cells = <0>;
  94
  95                 telit {
  96                         gpio-export,name = "telit";
  97                         gpio-export,output = <1>;
  98                         gpios = <&gpio0 13 0>;
  99                 };
 100         };
 101 };
 102
 103 &pinctrl {
 104         state_default: pinctrl0 {
 105                 gpio {
 106                         ralink,group = "i2c", "rgmii2", "spi", "ephy";
 107                         ralink,function = "gpio";
 108                 };
 109
 110                 uartf_gpio {
 111                         ralink,group = "uartf";
 112                         ralink,function = "gpio uartf";
 113                 };
 114         };
 115 };
 116
 117 &uart {
 118         status = "okay";
 119 };
 120
 121 &gpio1 {
 122         status = "okay";
 123 };
 124
 125 &gpio2 {
 126         status = "okay";
 127 };
 128
 129 &ethernet {
 130         status = "okay";
 131         pinctrl-names = "default";
 132         pinctrl-0 = <&rgmii1_pins &mdio_pins>;
 133         mediatek,portmap = "llllw";
 134
 135         port@4 {
 136                 status = "okay";
 137                 phy-handle = <&phy4>;
 138                 phy-mode = "rgmii";
 139         };
 140
 141         port@5 {
 142                 status = "okay";
 143                 phy-handle = <&phy5>;
 144                 phy-mode = "rgmii";
 145         };
 146
 147         mdio-bus {
 148                 status = "okay";
 149
 150                 phy4: ethernet-phy@4 {
 151                         reg = <4>;
 152                         phy-mode = "rgmii";
 153                 };
 154
 155                 phy5: ethernet-phy@5 {
 156                         reg = <5>;
 157                         phy-mode = "rgmii";
 158                 };
 159         };
 160 };
 161
 162 &gsw {
 163         mediatek,port4 = "gmac";
 164 };
 165
 166 &ehci {
 167         status = "okay";
 168 };
 169
 170 &ohci {
 171         status = "okay";
 172 };