sys/gnu/dts/mips/RT-G32-B1.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "RT-G32-B1", "ralink,rt3050-soc";
   7         model = "Asus RT-G32 B1";
   8
   9         gpio-keys-polled {
  10                 compatible = "gpio-keys-polled";
  11                 #address-cells = <1>;
  12                 #size-cells = <0>;
  13                 poll-interval = <20>;
  14
  15                 reset {
  16                         label = "reset";
  17                         gpios = <&gpio0 10 1>;
  18                         linux,code = <0x198>;
  19                 };
  20
  21                 wps {
  22                         label = "wps";
  23                         gpios = <&gpio0 0 1>;
  24                         linux,code = <0x211>;
  25                 };
  26         };
  27 };
  28
  29 &spi0 {
  30         status = "okay";
  31
  32         m25p80@0 {
  33                 #address-cells = <1>;
  34                 #size-cells = <1>;
  35                 compatible = "jedec,spi-nor";
  36                 reg = <0>;
  37                 linux,modalias = "m25p80", "mx25l3205d";
  38                 spi-max-frequency = <10000000>;
  39
  40                 partition@0 {
  41                         label = "u-boot";
  42                         reg = <0x0 0x30000>;
  43                         read-only;
  44                 };
  45
  46                 partition@30000 {
  47                         label = "devdata";
  48                         reg = <0x30000 0x10000>;
  49                         read-only;
  50                 };
  51
  52                 devconf: partition@40000 {
  53                         label = "devconf";
  54                         reg = <0x40000 0x10000>;
  55                         read-only;
  56                 };
  57
  58                 partition@50000 {
  59                         label = "firmware";
  60                         reg = <0x50000 0x3b0000>;
  61                 };
  62         };
  63 };
  64
  65 &pinctrl {
  66         state_default: pinctrl0 {
  67                 gpio {
  68                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  69                         ralink,function = "gpio";
  70                 };
  71         };
  72 };
  73
  74 &ethernet {
  75         mtd-mac-address = <&devconf 0x4>;
  76 };
  77
  78 &esw {
  79         mediatek,portmap = <0x2f>;
  80 };
  81
  82 &wmac {
  83         ralink,mtd-eeprom = <&devconf 0>;
  84 };