sys/gnu/dts/mips/RT-N10-PLUS.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "RT-N10-PLUS", "ralink,rt3050-soc";
   7         model = "Asus RT-N10+";
   8
   9         cfi@1f000000 {
  10                 compatible = "cfi-flash";
  11                 reg = <0x1f000000 0x800000>;
  12                 bank-width = <2>;
  13                 device-width = <2>;
  14                 #address-cells = <1>;
  15                 #size-cells = <1>;
  16
  17                 partition@0 {
  18                         label = "u-boot";
  19                         reg = <0x0 0x30000>;
  20                         read-only;
  21                 };
  22
  23                 partition@30000 {
  24                         label = "devdata";
  25                         reg = <0x30000 0x10000>;
  26                         read-only;
  27                 };
  28
  29                 devconf: partition@40000 {
  30                         label = "devconf";
  31                         reg = <0x40000 0x10000>;
  32                         read-only;
  33                 };
  34
  35                 partition@50000 {
  36                         label = "firmware";
  37                         reg = <0x50000 0x3b0000>;
  38                 };
  39         };
  40
  41         gpio-leds {
  42                 compatible = "gpio-leds";
  43
  44                 wps {
  45                         label = "rt-n10-plus:green:wps";
  46                         gpios = <&gpio0 14 1>;
  47                 };
  48         };
  49
  50         gpio-keys-polled {
  51                 compatible = "gpio-keys-polled";
  52                 #address-cells = <1>;
  53                 #size-cells = <0>;
  54                 poll-interval = <20>;
  55
  56                 reset {
  57                         label = "reset";
  58                         gpios = <&gpio0 10 1>;
  59                         linux,code = <0x198>;
  60                 };
  61
  62                 wps {
  63                         label = "wps";
  64                         gpios = <&gpio0 0 1>;
  65                         linux,code = <0x211>;
  66                 };
  67         };
  68 };
  69
  70 &ethernet {
  71         mtd-mac-address = <&devconf 0x4>;
  72 };
  73
  74 &esw {
  75         mediatek,portmap = <0x3e>;
  76 };
  77
  78 &wmac {
  79         ralink,mtd-eeprom = <&devconf 0>;
  80 };