sys/gnu/dts/mips/RT-N15.dts

   1 /dts-v1/;
   2
   3 #include "rt2880.dtsi"
   4
   5 / {
   6         #address-cells = <1>;
   7         #size-cells = <1>;
   8         compatible = "RT-N15", "ralink,rt2880-soc";
   9         model = "Asus RT-N15";
  10
  11         cfi@1f000000 {
  12                 compatible = "cfi-flash";
  13                 reg = <0x1f000000 0x800000>;
  14                 bank-width = <2>;
  15                 device-width = <2>;
  16                 #address-cells = <1>;
  17                 #size-cells = <1>;
  18
  19                 partition@0 {
  20                         label = "uboot";
  21                         reg = <0x0 0x30000>;
  22                         read-only;
  23                 };
  24
  25                 partition@30000 {
  26                         label = "uboot-env";
  27                         reg = <0x30000 0x10000>;
  28                         read-only;
  29                 };
  30
  31                 factory: partition@40000 {
  32                         label = "factory";
  33                         reg = <0x40000 0x10000>;
  34                         read-only;
  35                 };
  36
  37                 partition@50000 {
  38                         label = "firmware";
  39                         reg = <0x50000 0x3b0000>;
  40                 };
  41         };
  42
  43         rtl8366s {
  44                 compatible = "realtek,rtl8366s";
  45                 gpio-sda = <&gpio0 1 0>;
  46                 gpio-sck = <&gpio0 2 0>;
  47         };
  48
  49         gpio-keys-polled {
  50                 compatible = "gpio-keys-polled";
  51                 #address-cells = <1>;
  52                 #size-cells = <0>;
  53                 poll-interval = <100>;
  54
  55                 wps {
  56                         label = "wps";
  57                         gpios = <&gpio0 0 0>;
  58                         linux,code = <0x211>;
  59                 };
  60
  61                 reset {
  62                         label = "reset";
  63                         gpios = <&gpio0 12 0>;
  64                         linux,code = <0x198>;
  65                 };
  66         };
  67
  68         gpio-leds {
  69                 compatible = "gpio-leds";
  70
  71                 power {
  72                         label = "rt-n15:blue:power";
  73                         gpios = <&gpio0 11 1>;
  74                 };
  75         };
  76 };
  77
  78 &gpio0 {
  79         status = "okay";
  80 };
  81
  82 &pinctrl {
  83         state_default: pinctrl0 {
  84                 gpio {
  85                         ralink,group = "i2c", "uartlite", "mdio";
  86                         ralink,function = "gpio";
  87                 };
  88         };
  89 };
  90
  91 &ethernet {
  92         status = "okay";
  93         mtd-mac-address = <&factory 0x4>;
  94
  95         port@0 {
  96                 mediatek,fixed-link = <1000 1 1 1>;
  97         };
  98
  99         mdio-bus {
 100                 status = "okay";
 101
 102                 phy0: ethernet-phy@0 {
 103                         phy-mode = "mii";
 104                         reg = <0>;
 105                 };
 106         };
 107 };
 108
 109 &wmac {
 110         ralink,mtd-eeprom = <&factory 0>;
 111 };