sys/gnu/dts/mips/RT-N56U.dts

   1 /dts-v1/;
   2
   3 #include "rt3883.dtsi"
   4
   5 / {
   6         compatible = "RT-N56U", "ralink,rt3883-soc";
   7         model = "Asus RT-N56U";
   8
   9         nor-flash@1c000000 {
  10                 compatible = "cfi-flash";
  11                 reg = <0x1c000000 0x800000>;
  12                 bank-width = <2>;
  13                 #address-cells = <1>;
  14                 #size-cells = <1>;
  15
  16                 partition@0 {
  17                         reg = <0x0 0x0030000>;
  18                         label = "u-boot";
  19                         read-only;
  20                 };
  21
  22                 partition@30000 {
  23                         reg = <0x00030000 0x00010000>;
  24                         label = "u-boot-env";
  25                         read-only;
  26                 };
  27
  28                 factory: partition@40000 {
  29                         reg = <0x00040000 0x00010000>;
  30                         label = "factory";
  31                         read-only;
  32                 };
  33
  34                 partition@50000 {
  35                         reg = <0x00050000 0x007b0000>;
  36                         label = "firmware";
  37                 };
  38         };
  39
  40         rtl8367 {
  41                 compatible = "realtek,rtl8367";
  42                 gpio-sda = <&gpio0 1 0>;
  43                 gpio-sck = <&gpio0 2 0>;
  44                 realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
  45         };
  46
  47         gpio-keys-polled {
  48                 compatible = "gpio-keys-polled";
  49                 #address-cells = <1>;
  50                 #size-cells = <0>;
  51                 poll-interval = <100>;
  52
  53                 reset {
  54                         label = "reset";
  55                         gpios = <&gpio0 13 1>;
  56                         linux,code = <0x198>;
  57                 };
  58
  59                 wps {
  60                         label = "wps";
  61                         gpios = <&gpio1 2 1>;
  62                         linux,code = <0x211>;
  63                 };
  64         };
  65
  66         gpio-leds {
  67                 compatible = "gpio-leds";
  68
  69                 power {
  70                         label = "rt-n56u:blue:power";
  71                         gpios = <&gpio0 0 1>;
  72                 };
  73
  74                 lan {
  75                         label = "rt-n56u:blue:lan";
  76                         gpios = <&gpio0 19 1>;
  77                 };
  78
  79                 wan {
  80                         label = "rt-n56u:blue:wan";
  81                         gpios = <&gpio1 3 1>;
  82                 };
  83
  84                 usb {
  85                         label = "rt-n56u:blue:usb";
  86                         gpios = <&gpio1 0 1>;
  87                 };
  88         };
  89 };
  90
  91 &gpio1 {
  92         status = "okay";
  93 };
  94
  95 &pinctrl {
  96         state_default: pinctrl0 {
  97                 gpio {
  98                         ralink,group = "spi", "i2c", "jtag", "uartf";
  99                         ralink,function = "gpio";
 100                 };
 101         };
 102 };
 103
 104 &ethernet {
 105         mtd-mac-address = <&factory 0x4>;
 106
 107         port@0 {
 108                 mediatek,fixed-link = <1000 1 1 1>;
 109         };
 110 };
 111
 112 &pci {
 113         status = "okay";
 114         pinctrl-names = "default";
 115         pinctrl-0 = <&pci_pins>;
 116
 117         pci_pins: pci {
 118                 pci {
 119                         ralink,group = "pci";
 120                         ralink,function = "pci-fnc";
 121                 };
 122         };
 123
 124         host-bridge {
 125                 pci-bridge@1 {
 126                         status = "okay";
 127
 128                         wmac@0,0 {
 129                                 compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
 130                                 reg = < 0x10000 0 0 0 0 >;
 131                                 ralink,eeprom = "rt2x00pci_1_0.eeprom";
 132                         };
 133                 };
 134         };
 135 };
 136
 137 &wmac {
 138         status = "okay";
 139         ralink,2ghz = <0>;
 140         ralink,mtd-eeprom = <&factory 0>;
 141 };
 142
 143 &ehci {
 144         status = "okay";
 145 };
 146
 147 &ohci {
 148         status = "okay";
 149 };