sys/gnu/dts/mips/TINY-AC.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "TINY-AC", "ralink,mt7620a-soc";
   7         model = "Dovado Tiny AC";
   8
   9         chosen {
  10                 bootargs = "console=ttyS0,57600";
  11         };
  12
  13         gpio-leds {
  14                 compatible = "gpio-leds";
  15
  16                 usb {
  17                         label = "tiny-ac:green:usb";
  18                         gpios = <&gpio0 11 1>;
  19                 };
  20
  21                 wifi {
  22                         label = "tiny-ac:orange:wifi";
  23                         gpios = <&gpio3 0 1>;
  24                 };
  25
  26         };
  27
  28         gpio-keys-polled {
  29                 compatible = "gpio-keys-polled";
  30                 #address-cells = <1>;
  31                 #size-cells = <0>;
  32                 poll-interval = <20>;
  33
  34                 reset {
  35                         label = "reset";
  36                         gpios = <&gpio0 13 1>;
  37                         linux,code = <0x198>;
  38                 };
  39
  40         };
  41
  42         gpio_export {
  43                 compatible = "gpio-export";
  44                 #size-cells = <0>;
  45
  46                 usbpower {
  47                         gpio-export,name = "usbpower";
  48                         gpio-export,output = <1>;
  49                         gpios = <&gpio2 5 0>;
  50                 };
  51         };
  52 };
  53
  54 &gpio0 {
  55         status = "okay";
  56 };
  57
  58 &gpio2 {
  59         status = "okay";
  60 };
  61
  62 &gpio3 {
  63         status = "okay";
  64 };
  65
  66 &spi0 {
  67         status = "okay";
  68
  69         m25p80@0 {
  70                 #address-cells = <1>;
  71                 #size-cells = <1>;
  72                 compatible = "jedec,spi-nor";
  73                 reg = <0>;
  74                 linux,modalias = "m25p80", "mx25l6405d";
  75                 spi-max-frequency = <10000000>;
  76
  77                 partition@0 {
  78                         label = "u-boot";
  79                         reg = <0x0 0x30000>;
  80                         read-only;
  81                 };
  82
  83                 partition@30000 {
  84                         label = "u-boot-env";
  85                         reg = <0x30000 0x10000>;
  86                         read-only;
  87                 };
  88
  89                 factory: partition@40000 {
  90                         label = "factory";
  91                         reg = <0x40000 0x10000>;
  92                         read-only;
  93                 };
  94
  95                 partition@50000 {
  96                         label = "firmware";
  97                         reg = <0x50000 0x7b0000>;
  98                 };
  99         };
 100 };
 101
 102 &ehci {
 103         status = "okay";
 104 };
 105
 106 &ohci {
 107         status = "okay";
 108 };
 109
 110 &ethernet {
 111         status = "okay";
 112         pinctrl-names = "default";
 113         pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
 114         mediatek,portmap = "llllw";
 115
 116         port@4 {
 117                 status = "okay";
 118                 phy-mode = "rgmii";
 119                 phy-handle = <&phy4>;
 120         };
 121
 122         port@5 {
 123                 status = "okay";
 124                 phy-mode = "rgmii";
 125                 phy-handle = <&phy5>;
 126         };
 127
 128         mdio-bus {
 129                 status = "okay";
 130
 131                 phy4: ethernet-phy@4 {
 132                         reg = <4>;
 133                         phy-mode = "rgmii";
 134                 };
 135
 136                 phy5: ethernet-phy@5 {
 137                         reg = <5>;
 138                         phy-mode = "rgmii";
 139                 };
 140         };
 141 };
 142
 143 &gsw {
 144         mediatek,port4 = "gmac";
 145         mediatek,mt7530 = <1>;
 146 };
 147
 148 &wmac {
 149         ralink,eeprom = "rt2x00pci_1_0.eeprom";
 150 };
 151
 152 &pcie {
 153         status = "okay";
 154 };
 155
 156 &pinctrl {
 157         state_default: pinctrl0 {
 158                 gpio {
 159                         ralink,group = "uartf", "nd_sd", "wled";
 160                         ralink,function = "gpio";
 161                 };
 162         };
 163 };