sys/gnu/dts/mips/WIZFI630A.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 / {
   6         compatible = "wizfi630a", "ralink,rt5350-soc";
   7         model = "WIZnet WizFi630A";
   8
   9         chosen {
  10                 bootargs = "console=ttyS1,115200";
  11         };
  12
  13         gpio-export {
  14                 compatible = "gpio-export";
  15                 #size-cells = <0>;
  16         };
  17
  18         gpio-leds {
  19                 compatible = "gpio-leds";
  20
  21                 run {
  22                         label = "wizfi630a::run";
  23                         gpios = <&gpio0 1 1>;
  24                 };
  25
  26                 wps {
  27                         label = "wizfi630a::wps";
  28                         gpios = <&gpio0 20 1>;
  29                 };
  30
  31                 uart1 {
  32                         label = "wizfi630a::uart1";
  33                         gpios = <&gpio0 18 1>;
  34                 };
  35
  36                 uart2 {
  37                         label = "wizfi630a::uart2";
  38                         gpios = <&gpio0 21 1>;
  39                 };
  40         };
  41
  42         gpio-keys-polled {
  43                 compatible = "gpio-keys-polled";
  44                 #address-cells = <1>;
  45                 #size-cells = <0>;
  46                 poll-interval = <20>;
  47
  48                 reset {
  49                         label = "reset";
  50                         gpios = <&gpio0 17 1>;
  51                         linux,code = <0x198>;
  52                 };
  53
  54                 wps {
  55                         label = "wps";
  56                         gpios = <&gpio0 0 1>;
  57                         linux,code = <0x211>;
  58                 };
  59
  60                 scm1 {
  61                         label = "SCM1";
  62                         gpios = <&gpio0 19 1>;
  63                         linux,code = <0x100>;
  64                 };
  65
  66                 scm2 {
  67                         label = "SCM2";
  68                         gpios = <&gpio0 2 1>;
  69                         linux,code = <0x101>;
  70                 };
  71         };
  72 };
  73
  74 &gpio1 {
  75         status = "okay";
  76 };
  77
  78 &spi0 {
  79         status = "okay";
  80
  81         m25p80@0 {
  82                 #address-cells = <1>;
  83                 #size-cells = <1>;
  84                 compatible = "jedec,spi-nor";
  85                 reg = <0>;
  86                 linux,modalias = "m25p80", "w25q128";
  87                 spi-max-frequency = <10000000>;
  88
  89                 partition@0 {
  90                         #size-cells = <1>;
  91                         label = "uboot";
  92                         reg = <0x0 0x30000>;
  93                         read-only;
  94                 };
  95
  96                 partition@30000 {
  97                         #size-cells = <1>;
  98                         label = "uboot-env";
  99                         reg = <0x30000 0x10000>;
 100                         read-only;
 101                 };
 102
 103                 factory: partition@40000 {
 104                         #size-cells = <1>;
 105                         label = "factory";
 106                         reg = <0x40000 0x10000>;
 107                         read-only;
 108                 };
 109
 110                 partition@50000 {
 111                         #size-cells = <1>;
 112                         label = "firmware";
 113                         reg = <0x50000 0xfb0000>;
 114                 };
 115         };
 116 };
 117
 118 &uart {
 119         compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
 120         reg = <0x500 0x100>;
 121         resets = <&rstctrl 12>;
 122         reset-names = "uart";
 123         interrupt-parent = <&intc>;
 124         interrupts = <5>;
 125         reg-shift = <2>;
 126         pinctrl-names = "default";
 127         pinctrl-0 = <&uartf_pins>;
 128         status = "okay";
 129 };
 130
 131 &uartlite {
 132         compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
 133         reg = <0xc00 0x100>;
 134         resets = <&rstctrl 19>;
 135         reset-names = "uartl";
 136         interrupt-parent = <&intc>;
 137         interrupts = <12>;
 138         reg-shift = <2>;
 139         pinctrl-names = "default";
 140         pinctrl-0 = <&uartlite_pins>;
 141 };
 142
 143 &pinctrl {
 144         state_default: pinctrl0 {
 145                 gpio {
 146                         ralink,group = "i2c", "jtag" ;
 147                         ralink,function = "gpio";
 148                 };
 149         };
 150
 151         uartf_gpio_pins: uartf_gpio {
 152                 uartf_gpio {
 153                         ralink,group = "uartf";
 154                         ralink,function = "uartf";
 155                 };
 156         };
 157
 158         uartlite_pins: uartlite {
 159                 uart {
 160                         ralink,group = "uartlite";
 161                         ralink,function = "uartlite";
 162                 };
 163         };
 164 };
 165
 166 &ethernet {
 167         mtd-mac-address = <&factory 0x4>;
 168 };
 169
 170 &esw {
 171         mediatek,portmap = <0x17>;
 172 };
 173
 174 &wmac {
 175         ralink,mtd-eeprom = <&factory 0>;
 176 };
 177
 178 &ehci {
 179         status = "okay";
 180 };
 181
 182 &ohci {
 183         status = "okay";
 184 };