sys/gnu/dts/mips/WLI-TX4-AG300N.dts

   1 /dts-v1/;
   2
   3 #include "rt2880.dtsi"
   4
   5 / {
   6         #address-cells = <1>;
   7         #size-cells = <1>;
   8         compatible = "WLI-TX4-AG300N", "ralink,rt2880-soc";
   9         model = "Buffalo WLI-TX4-AG300N";
  10
  11         cfi@1f000000 {
  12                 compatible = "cfi-flash";
  13                 reg = <0x1f000000 0x800000>;
  14                 bank-width = <2>;
  15                 device-width = <2>;
  16                 #address-cells = <1>;
  17                 #size-cells = <1>;
  18
  19                 partition@0 {
  20                         label = "uboot";
  21                         reg = <0x0 0x30000>;
  22                         read-only;
  23                 };
  24
  25                 partition@30000 {
  26                         label = "uboot-env";
  27                         reg = <0x30000 0x10000>;
  28                         read-only;
  29                 };
  30
  31                 factory: partition@40000 {
  32                         label = "factory";
  33                         reg = <0x40000 0x10000>;
  34                         read-only;
  35                 };
  36
  37                 partition@50000 {
  38                         label = "linux";
  39                         reg = <0x50000 0x3b0000>;
  40                 };
  41         };
  42
  43         gpio-keys-polled {
  44                 compatible = "gpio-keys-polled";
  45                 #address-cells = <1>;
  46                 #size-cells = <0>;
  47                 poll-interval = <100>;
  48
  49                 wps {
  50                         label = "wps";
  51                         gpios = <&gpio0 0 1>;
  52                         linux,code = <0x211>;
  53                 };
  54
  55                 bandwidth {
  56                         label = "bandwidth";
  57                         gpios = <&gpio0 8 0>;
  58                         linux,code = <0x198>;
  59                 };
  60
  61                 reset {
  62                         label = "reset";
  63                         gpios = <&gpio0 9 1>;
  64                         linux,code = <0x198>;
  65                 };
  66         };
  67
  68         gpio-leds {
  69                 compatible = "gpio-leds";
  70
  71                 diag {
  72                         label = "wli-tx4-ag300n:red:diag";
  73                         gpios = <&gpio0 10 1>;
  74                 };
  75
  76                 power {
  77                         label = "wli-tx4-ag300n:blue:power";
  78                         gpios = <&gpio0 12 1>;
  79                 };
  80
  81                 security {
  82                         label = "wli-tx4-ag300n:blue:security";
  83                         gpios = <&gpio0 13 1>;
  84                 };
  85         };
  86 };
  87
  88 &gpio0 {
  89         status = "okay";
  90 };
  91
  92 &ethernet {
  93         status = "okay";
  94         mtd-mac-address = <&factory 0x4>;
  95
  96         port@0 {
  97                 mediatek,fixed-link = <1000 1 1 1>;
  98         };
  99 };
 100
 101 &wmac {
 102         ralink,mtd-eeprom = <&factory 0>;
 103 };