]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/i386/i386/exception.s
Update llvm/clang to r242221.
[FreeBSD/FreeBSD.git] / sys / i386 / i386 / exception.s
1 /*-
2  * Copyright (c) 1989, 1990 William F. Jolitz.
3  * Copyright (c) 1990 The Regents of the University of California.
4  * Copyright (c) 2007 The FreeBSD Foundation
5  * All rights reserved.
6  *
7  * Portions of this software were developed by A. Joseph Koshy under
8  * sponsorship from the FreeBSD Foundation and Google, Inc.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 4. Neither the name of the University nor the names of its contributors
19  *    may be used to endorse or promote products derived from this software
20  *    without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
23  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
26  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32  * SUCH DAMAGE.
33  *
34  * $FreeBSD$
35  */
36
37 #include "opt_apic.h"
38 #include "opt_atpic.h"
39 #include "opt_hwpmc_hooks.h"
40 #include "opt_npx.h"
41
42 #include <machine/asmacros.h>
43 #include <machine/psl.h>
44 #include <machine/trap.h>
45
46 #include "assym.s"
47
48 #define SEL_RPL_MASK    0x0003
49 #define GSEL_KPL        0x0020  /* GSEL(GCODE_SEL, SEL_KPL) */
50
51 #ifdef KDTRACE_HOOKS
52         .bss
53         .globl  dtrace_invop_jump_addr
54         .align  4
55         .type   dtrace_invop_jump_addr, @object
56         .size   dtrace_invop_jump_addr, 4
57 dtrace_invop_jump_addr:
58         .zero   4
59         .globl  dtrace_invop_calltrap_addr
60         .align  4
61         .type   dtrace_invop_calltrap_addr, @object
62         .size   dtrace_invop_calltrap_addr, 4
63 dtrace_invop_calltrap_addr:
64         .zero   8
65 #endif
66         .text
67 #ifdef HWPMC_HOOKS
68         ENTRY(start_exceptions)
69 #endif
70 /*****************************************************************************/
71 /* Trap handling                                                             */
72 /*****************************************************************************/
73 /*
74  * Trap and fault vector routines.
75  *
76  * Most traps are 'trap gates', SDT_SYS386TGT.  A trap gate pushes state on
77  * the stack that mostly looks like an interrupt, but does not disable
78  * interrupts.  A few of the traps we are use are interrupt gates,
79  * SDT_SYS386IGT, which are nearly the same thing except interrupts are
80  * disabled on entry.
81  *
82  * The cpu will push a certain amount of state onto the kernel stack for
83  * the current process.  The amount of state depends on the type of trap
84  * and whether the trap crossed rings or not.  See i386/include/frame.h.
85  * At the very least the current EFLAGS (status register, which includes
86  * the interrupt disable state prior to the trap), the code segment register,
87  * and the return instruction pointer are pushed by the cpu.  The cpu
88  * will also push an 'error' code for certain traps.  We push a dummy
89  * error code for those traps where the cpu doesn't in order to maintain
90  * a consistent frame.  We also push a contrived 'trap number'.
91  *
92  * The cpu does not push the general registers, we must do that, and we
93  * must restore them prior to calling 'iret'.  The cpu adjusts the %cs and
94  * %ss segment registers, but does not mess with %ds, %es, or %fs.  Thus we
95  * must load them with appropriate values for supervisor mode operation.
96  */
97
98 MCOUNT_LABEL(user)
99 MCOUNT_LABEL(btrap)
100
101 #define TRAP(a)         pushl $(a) ; jmp alltraps
102
103 IDTVEC(div)
104         pushl $0; TRAP(T_DIVIDE)
105 IDTVEC(dbg)
106         pushl $0; TRAP(T_TRCTRAP)
107 IDTVEC(nmi)
108         pushl $0; TRAP(T_NMI)
109 IDTVEC(bpt)
110         pushl $0; TRAP(T_BPTFLT)
111 IDTVEC(dtrace_ret)
112         pushl $0; TRAP(T_DTRACE_RET)
113 IDTVEC(ofl)
114         pushl $0; TRAP(T_OFLOW)
115 IDTVEC(bnd)
116         pushl $0; TRAP(T_BOUND)
117 #ifndef KDTRACE_HOOKS
118 IDTVEC(ill)
119         pushl $0; TRAP(T_PRIVINFLT)
120 #endif
121 IDTVEC(dna)
122         pushl $0; TRAP(T_DNA)
123 IDTVEC(fpusegm)
124         pushl $0; TRAP(T_FPOPFLT)
125 IDTVEC(tss)
126         TRAP(T_TSSFLT)
127 IDTVEC(missing)
128         TRAP(T_SEGNPFLT)
129 IDTVEC(stk)
130         TRAP(T_STKFLT)
131 IDTVEC(prot)
132         TRAP(T_PROTFLT)
133 IDTVEC(page)
134         TRAP(T_PAGEFLT)
135 IDTVEC(mchk)
136         pushl $0; TRAP(T_MCHK)
137 IDTVEC(rsvd)
138         pushl $0; TRAP(T_RESERVED)
139 IDTVEC(fpu)
140         pushl $0; TRAP(T_ARITHTRAP)
141 IDTVEC(align)
142         TRAP(T_ALIGNFLT)
143 IDTVEC(xmm)
144         pushl $0; TRAP(T_XMMFLT)
145
146         /*
147          * All traps except ones for syscalls jump to alltraps.  If
148          * interrupts were enabled when the trap occurred, then interrupts
149          * are enabled now if the trap was through a trap gate, else
150          * disabled if the trap was through an interrupt gate.  Note that
151          * int0x80_syscall is a trap gate.   Interrupt gates are used by
152          * page faults, non-maskable interrupts, debug and breakpoint
153          * exceptions.
154          */
155         SUPERALIGN_TEXT
156         .globl  alltraps
157         .type   alltraps,@function
158 alltraps:
159         pushal
160         pushl   $0
161         movl    %ds,(%esp)
162         pushl   $0
163         movl    %es,(%esp)
164         pushl   $0
165         movl    %fs,(%esp)
166 alltraps_with_regs_pushed:
167         SET_KERNEL_SREGS
168         cld
169         FAKE_MCOUNT(TF_EIP(%esp))
170 calltrap:
171         pushl   %esp
172         call    trap
173         add     $4, %esp
174
175         /*
176          * Return via doreti to handle ASTs.
177          */
178         MEXITCOUNT
179         jmp     doreti
180
181 /*
182  * Privileged instruction fault.
183  */
184 #ifdef KDTRACE_HOOKS
185         SUPERALIGN_TEXT
186 IDTVEC(ill)
187         /* Check if there is no DTrace hook registered. */
188         cmpl    $0,dtrace_invop_jump_addr
189         je      norm_ill
190
191         /* Check if this is a user fault. */
192         cmpl    $GSEL_KPL, 4(%esp)      /* Check the code segment. */
193
194         /* If so, just handle it as a normal trap. */
195         jne     norm_ill
196
197         /*
198          * This is a kernel instruction fault that might have been caused
199          * by a DTrace provider.
200          */
201         pushal                          /* Push all registers onto the stack. */
202
203         /*
204          * Set our jump address for the jump back in the event that
205          * the exception wasn't caused by DTrace at all.
206          */
207         movl    $norm_ill, dtrace_invop_calltrap_addr
208
209         /* Jump to the code hooked in by DTrace. */
210         jmpl    *dtrace_invop_jump_addr
211
212         /*
213          * Process the instruction fault in the normal way.
214          */
215 norm_ill:
216         pushl $0
217         TRAP(T_PRIVINFLT)
218 #endif
219
220 /*
221  * Call gate entry for syscalls (lcall 7,0).
222  * This is used by FreeBSD 1.x a.out executables and "old" NetBSD executables.
223  *
224  * The intersegment call has been set up to specify one dummy parameter.
225  * This leaves a place to put eflags so that the call frame can be
226  * converted to a trap frame. Note that the eflags is (semi-)bogusly
227  * pushed into (what will be) tf_err and then copied later into the
228  * final spot. It has to be done this way because esp can't be just
229  * temporarily altered for the pushfl - an interrupt might come in
230  * and clobber the saved cs/eip.
231  */
232         SUPERALIGN_TEXT
233 IDTVEC(lcall_syscall)
234         pushfl                          /* save eflags */
235         popl    8(%esp)                 /* shuffle into tf_eflags */
236         pushl   $7                      /* sizeof "lcall 7,0" */
237         subl    $4,%esp                 /* skip over tf_trapno */
238         pushal
239         pushl   $0
240         movl    %ds,(%esp)
241         pushl   $0
242         movl    %es,(%esp)
243         pushl   $0
244         movl    %fs,(%esp)
245         SET_KERNEL_SREGS
246         cld
247         FAKE_MCOUNT(TF_EIP(%esp))
248         pushl   %esp
249         call    syscall
250         add     $4, %esp
251         MEXITCOUNT
252         jmp     doreti
253
254 /*
255  * Trap gate entry for syscalls (int 0x80).
256  * This is used by FreeBSD ELF executables, "new" NetBSD executables, and all
257  * Linux executables.
258  *
259  * Even though the name says 'int0x80', this is actually a trap gate, not an
260  * interrupt gate.  Thus interrupts are enabled on entry just as they are for
261  * a normal syscall.
262  */
263         SUPERALIGN_TEXT
264 IDTVEC(int0x80_syscall)
265         pushl   $2                      /* sizeof "int 0x80" */
266         subl    $4,%esp                 /* skip over tf_trapno */
267         pushal
268         pushl   $0
269         movl    %ds,(%esp)
270         pushl   $0
271         movl    %es,(%esp)
272         pushl   $0
273         movl    %fs,(%esp)
274         SET_KERNEL_SREGS
275         cld
276         FAKE_MCOUNT(TF_EIP(%esp))
277         pushl   %esp
278         call    syscall
279         add     $4, %esp
280         MEXITCOUNT
281         jmp     doreti
282
283 ENTRY(fork_trampoline)
284         pushl   %esp                    /* trapframe pointer */
285         pushl   %ebx                    /* arg1 */
286         pushl   %esi                    /* function */
287         call    fork_exit
288         addl    $12,%esp
289         /* cut from syscall */
290
291         /*
292          * Return via doreti to handle ASTs.
293          */
294         MEXITCOUNT
295         jmp     doreti
296
297
298 /*
299  * To efficiently implement classification of trap and interrupt handlers
300  * for profiling, there must be only trap handlers between the labels btrap
301  * and bintr, and only interrupt handlers between the labels bintr and
302  * eintr.  This is implemented (partly) by including files that contain
303  * some of the handlers.  Before including the files, set up a normal asm
304  * environment so that the included files doen't need to know that they are
305  * included.
306  */
307
308         .data
309         .p2align 4
310         .text
311         SUPERALIGN_TEXT
312 MCOUNT_LABEL(bintr)
313
314 #ifdef DEV_ATPIC
315 #include <i386/i386/atpic_vector.s>
316 #endif
317
318 #if defined(DEV_APIC) && defined(DEV_ATPIC)
319         .data
320         .p2align 4
321         .text
322         SUPERALIGN_TEXT
323 #endif
324
325 #ifdef DEV_APIC
326 #include <i386/i386/apic_vector.s>
327 #endif
328
329         .data
330         .p2align 4
331         .text
332         SUPERALIGN_TEXT
333 #include <i386/i386/vm86bios.s>
334
335         .text
336 MCOUNT_LABEL(eintr)
337
338 /*
339  * void doreti(struct trapframe)
340  *
341  * Handle return from interrupts, traps and syscalls.
342  */
343         .text
344         SUPERALIGN_TEXT
345         .type   doreti,@function
346 doreti:
347         FAKE_MCOUNT($bintr)             /* init "from" bintr -> doreti */
348 doreti_next:
349         /*
350          * Check if ASTs can be handled now.  ASTs cannot be safely
351          * processed when returning from an NMI.
352          */
353         cmpb    $T_NMI,TF_TRAPNO(%esp)
354 #ifdef HWPMC_HOOKS
355         je      doreti_nmi
356 #else
357         je      doreti_exit
358 #endif
359         /*
360          * PSL_VM must be checked first since segment registers only
361          * have an RPL in non-VM86 mode.
362          * ASTs can not be handled now if we are in a vm86 call.
363          */
364         testl   $PSL_VM,TF_EFLAGS(%esp)
365         jz      doreti_notvm86
366         movl    PCPU(CURPCB),%ecx
367         testl   $PCB_VM86CALL,PCB_FLAGS(%ecx)
368         jz      doreti_ast
369         jmp     doreti_exit
370
371 doreti_notvm86:
372         testb   $SEL_RPL_MASK,TF_CS(%esp) /* are we returning to user mode? */
373         jz      doreti_exit             /* can't handle ASTs now if not */
374
375 doreti_ast:
376         /*
377          * Check for ASTs atomically with returning.  Disabling CPU
378          * interrupts provides sufficient locking even in the SMP case,
379          * since we will be informed of any new ASTs by an IPI.
380          */
381         cli
382         movl    PCPU(CURTHREAD),%eax
383         testl   $TDF_ASTPENDING | TDF_NEEDRESCHED,TD_FLAGS(%eax)
384         je      doreti_exit
385         sti
386         pushl   %esp                    /* pass a pointer to the trapframe */
387         call    ast
388         add     $4,%esp
389         jmp     doreti_ast
390
391         /*
392          * doreti_exit: pop registers, iret.
393          *
394          *      The segment register pop is a special case, since it may
395          *      fault if (for example) a sigreturn specifies bad segment
396          *      registers.  The fault is handled in trap.c.
397          */
398 doreti_exit:
399         MEXITCOUNT
400
401         .globl  doreti_popl_fs
402 doreti_popl_fs:
403         popl    %fs
404         .globl  doreti_popl_es
405 doreti_popl_es:
406         popl    %es
407         .globl  doreti_popl_ds
408 doreti_popl_ds:
409         popl    %ds
410         popal
411         addl    $8,%esp
412         .globl  doreti_iret
413 doreti_iret:
414         iret
415
416         /*
417          * doreti_iret_fault and friends.  Alternative return code for
418          * the case where we get a fault in the doreti_exit code
419          * above.  trap() (i386/i386/trap.c) catches this specific
420          * case, sends the process a signal and continues in the
421          * corresponding place in the code below.
422          */
423         ALIGN_TEXT
424         .globl  doreti_iret_fault
425 doreti_iret_fault:
426         subl    $8,%esp
427         pushal
428         pushl   $0
429         movl    %ds,(%esp)
430         .globl  doreti_popl_ds_fault
431 doreti_popl_ds_fault:
432         pushl   $0
433         movl    %es,(%esp)
434         .globl  doreti_popl_es_fault
435 doreti_popl_es_fault:
436         pushl   $0
437         movl    %fs,(%esp)
438         .globl  doreti_popl_fs_fault
439 doreti_popl_fs_fault:
440         sti
441         movl    $0,TF_ERR(%esp) /* XXX should be the error code */
442         movl    $T_PROTFLT,TF_TRAPNO(%esp)
443         jmp     alltraps_with_regs_pushed
444 #ifdef HWPMC_HOOKS
445 doreti_nmi:
446         /*
447          * Since we are returning from an NMI, check if the current trap
448          * was from user mode and if so whether the current thread
449          * needs a user call chain capture.
450          */
451         testb   $SEL_RPL_MASK,TF_CS(%esp)
452         jz      doreti_exit
453         movl    PCPU(CURTHREAD),%eax    /* curthread present? */
454         orl     %eax,%eax
455         jz      doreti_exit
456         testl   $TDP_CALLCHAIN,TD_PFLAGS(%eax) /* flagged for capture? */
457         jz      doreti_exit
458         /*
459          * Take the processor out of NMI mode by executing a fake "iret".
460          */
461         pushfl
462         pushl   %cs
463         pushl   $outofnmi
464         iret
465 outofnmi:
466         /*
467          * Call the callchain capture hook after turning interrupts back on.
468          */
469         movl    pmc_hook,%ecx
470         orl     %ecx,%ecx
471         jz      doreti_exit
472         pushl   %esp                    /* frame pointer */
473         pushl   $PMC_FN_USER_CALLCHAIN  /* command */
474         movl    PCPU(CURTHREAD),%eax
475         pushl   %eax                    /* curthread */
476         sti
477         call    *%ecx
478         addl    $12,%esp
479         jmp     doreti_ast
480         ENTRY(end_exceptions)
481 #endif